(315) 853-6151
Ventrac tractor with a Tough Cut brush mower cutting tall grass and brush

Ventrac Tractor Dealer in Central New York

Ventrac builds articulating compact tractors in Orrville, Ohio, and more than 30 attachments that mount out front. Clinton Tractor is a Ventrac dealer in Clinton, NY, and our parts counter orders genuine Ventrac parts.

Call (315) 853-6151 Compare models Parts diagrams

Ventrac tractors

The 4520 is an articulating compact tractor that runs Ventrac attachments out front, in gas or diesel. The 45RC adds remote control, and the 34 in wide SSV is built for sidewalk snow.

Mowing attachments

Ventrac mowers mount out front, so the deck cuts before the tractor drives over the grass. The line runs from finish and contour decks to brush, flail, boom, reel and post mowers.

Snow and debris attachments

Ventrac debris and snow attachments clear walks, lots and lawns from the same tractor. The last five cards fit the SSV sidewalk snow vehicle.

Material handling and site prep attachments

Loaders, buckets and grapples move material, and rakes, cultivators, tillers and trenchers shape the ground. All mount out front on the Ventrac Mount System.

Turf care and specialty attachments

Aerators, a weed-control brush, a vacuum, a seeder, a sod cutter, an edger and ballfield tools. They round out a Ventrac for grounds crews, campuses and sports fields.

Ventrac history: built in Orrville, Ohio

Ventrac comes from the Steiner family, who say their aim is making life simpler through practical engineering and common sense. Before Ventrac, the family spent almost 25 years building farm equipment and other compact tractors.

The Ventrac brand launched in 1996, and the first 4000 series articulated tractor followed in 1998. Ventrac says its tractors and attachments have been built in Ohio for over 20 years. Its corporate offices at 500 Venture Drive, Orrville, house research and development, fabrication and welding, service, tractor assembly lines, and parts and warehouse facilities.

  1. 1996The Ventrac brand launches.
  2. 1998The first Ventrac 4000 series articulated tractor arrives.
Early Ventrac articulated tractors, one with a snow blower and one with a mower deck

Compare Ventrac tractors and attachments

Search all 46 Ventrac tractors and attachments by group, name or feature.

Showing all 46 models

Ventrac 4520N compact articulating tractor with ROPS, front three-quarter view

Ventrac tractor

Ventrac 4520N

Compact tractor with the 32.5 hp liquid-cooled Kubota WG972 gas engine.

32.5 hpKubota gas engine
51 ft-lbfpeak torque
1700 lbweight
39 inturning radius
  • Full-time all-wheel hydrostatic drive
  • FlexFrame articulates and oscillates with the ground
  • Ventrac Mount System for out-front attachments
  • Hydraulic power steering
  • Weight transfer for slope traction
Full specifications
Model4520N
Part number (SKU)39.51225
Turning Radius39 in
Ground Clearance5 in
Oscillation amount (@wheel)7.5 in
CoolingLiquid
Engine ManufacturerKubota
Fuel Capacity6 gal
Horsepower32.5 hp
Fuel TypeGas
Cylinders3
Engine modelWG972-G-E4
Peak Torque51 ft-lbf
Est. fuel use (with 60 in mower)1.2 gal/hr
DriveAWD All Wheel Drive
Travel Speed - Low Range5 mph forward / 4 mph reverse
Travel Speed - High Range10 mph forward / 8 mph reverse
Overall Width48.5 in
Weight1700 lb
Height (ROPS up)68 in
Height (ROPS down)54 in
Weight with 3Pt hitch1780 lb
Wheelbase45 in
All-terrain tires22x12-8
Turf tires22x11-10

Source: Ventrac 4520 page, 4520N column.

Ventrac 4520P compact articulating tractor with ROPS, front three-quarter view

Ventrac tractor

Ventrac 4520P

Compact tractor with the 31 hp liquid-cooled Kawasaki FD851D gas engine.

31 hpKawasaki gas engine
47.1 ft-lbfpeak torque
1620 lbweight
39 inturning radius
  • Full-time all-wheel hydrostatic drive
  • FlexFrame articulates and oscillates with the ground
  • Ventrac Mount System for out-front attachments
  • Low profile for trailer and shop space
Full specifications
Model4520P
Part number (SKU)39.51216
Turning Radius39 in
Ground Clearance5 in
Oscillation amount (@wheel)7.5 in
CoolingLiquid
Engine ManufacturerKawasaki
Fuel Capacity6 gal
Horsepower31 hp
Fuel TypeGas
Cylinders2
Engine modelFD851D DFI
Peak Torque47.1 ft-lbf
Est. fuel use (with 60 in mower)1.2 gal/hr
DriveAWD All Wheel Drive
Travel Speed - Low Range5 mph forward / 4 mph reverse
Travel Speed - High Range10 mph forward / 8 mph reverse
Overall Width48.5 in
Weight1620 lb
Height (ROPS up)68 in
Height (ROPS down)54 in
Weight with 3Pt hitch1700 lb
Wheelbase45 in
All-terrain tires22x12-8
Turf tires22x11-10

Source: Ventrac 4520 page, 4520P column.

Ventrac 4520Y diesel compact articulating tractor with ROPS, front three-quarter view

Ventrac tractor

Ventrac 4520Y

Compact tractor with the 25 hp liquid-cooled Kubota D902 diesel engine.

25 hpKubota diesel
1.1 gal/hrest. fuel use
1705 lbweight
39 inturning radius
  • Kubota D902 diesel engine
  • Full-time all-wheel hydrostatic drive
  • FlexFrame articulates and oscillates with the ground
  • Eight tires spread the weight and minimize impact on turf
Full specifications
Model4520Y
Part number (SKU)39.51217
Turning Radius39 in
Ground Clearance5 in
Oscillation amount (@wheel)7.5 in
CoolingLiquid
Engine ManufacturerKubota
Fuel Capacity6 gal
Horsepower25 hp
Fuel TypeDiesel
Cylinders3
Engine modelD902
Peak Torque42 ft-lbf
Est. fuel use (with 60 in mower)1.1 gal/hr
DriveAWD All Wheel Drive
Travel Speed - Low Range5 mph forward / 4 mph reverse
Travel Speed - High Range10 mph forward / 8 mph reverse
Overall Width48.5 in
Weight1705 lb
Height (ROPS up)68 in
Height (ROPS down)54 in
Weight with 3Pt hitch1785 lb
Wheelbase45 in
All-terrain tires22x12-8
Turf tires22x11-10

Source: Ventrac 4520 page, 4520Y column.

Ventrac 45RC remote control tractor with dual wheels and remote antenna mast

Ventrac tractor

Ventrac 45RC

Remote control tractor that also runs with the operator on board.

500 ftremote range
32.5 hpKubota gas engine
10 mphtop speed
2360 lbweight with duals
  • Dual operation: operator-on or remote
  • Industrial-grade remote with joysticks
  • Live camera feed in RC mode
  • Digital display with standard slope gauge
  • Built on the 4520 chassis
Full specifications
Model45RCN
Part number (SKU)39.51229
CoolingLiquid
Engine ManufacturerKubota
Fuel Capacity6 gal
Horsepower32.5 hp
Fuel TypeGas
Cylinders3
Est. fuel use (with 60 in mower)1.2 gal/hr
Max Ground Speed10 mph
OperationOperator-On and Remote
Tires4 tires standard (optional dual wheels recommended for all slope operation)
Tire SizeMTN PRO 22 x 11 x 8 in
Overall Length81.5 in
Overall Width48.5 in
Weight2160 lb
Width with Dual Wheels73 in
Height (W/O Prox Antenna)72 in
Height (With Prox Antenna)79 in
Weight with Dual Wheels2360 lb
CameraLive Feed in RC Mode
Remote Distance500 ft

Source: Ventrac 45RC page, 45RCN column.

Ventrac SSV sidewalk snow vehicle without an attachment, front three-quarter view

Ventrac tractor

Ventrac SSV Sidewalk Snow Vehicle

A 34 in wide sidewalk snow vehicle with quick-change snow attachments.

23 hpVanguard gas engine
34 inoverall width
8 mphtravel speed
970 lbweight
  • 34 in wide for narrow sidewalks
  • All-wheel drive
  • Attachments change in a minute or less
  • Runs a plow, V-blade, broom, snow blower or snow bucket
Full specifications
Model2120M
Part number (SKU)39.61102
Engine ManufacturerVanguard
Fuel Capacity3.3 gal
Horsepower23 hp
Fuel TypeGas
Cylinders2
Peak Torque32 @ 3,000 RPM
DriveAWD All Wheel Drive
Travel Speed8 mph
Overall Width34 in
Height55 in
Overall Length67 in
Wheelbase28 in
Weight970 lb

Source: Ventrac SSV page (model 2120M).

Ventrac MP270 Post Mower on a 4520 tractor with canopy, studio view

Ventrac mower

Ventrac MP270 Post Mower

Mow more, trim less: a mower pod that reaches around posts, signs, guardrails and trees.

27 incutting width
0.375 in - 6 inmowing height
400 lbweight
  • Reaches around fence posts, signs, guardrails and trees
  • Mows narrower, more confined spaces
  • Turns trimming hours into mowing hours
  • Side discharge, single blade
Full specifications
ModelMP270
Part number (SKU)39.55175
Overall Height31.5 in
Height to Linkage Pivot19 in
Overall Pod Height10.5 in
Deck Height3.5 in
Overall Width - Position 176 in
Overall Width - Position 264 in
Overall Length - Position 155 in
Overall Length - Position 266 in
Overall Width - Transport53 in
Overall Length - Transport75 in
Distance Past Single Wheels - Position 135 in
Distance Past Single Wheels - Position 227 in
Distance Past Dual Wheels - Position 123 in
Distance Past Dual Wheels - Position 215 in
Distance Past Centerline - Position 159 in
Distance Past Centerline - Position 251 in
Distance Past Centerline - Transport36 in
Cutting Width27 in
Discharge TypeSide
Number of Blades1
Weight400 lb
Mowing Height Range0.375 in - 6 in

Source: Ventrac MP270 Post Mower page.

Ventrac HQ682 Tough Cut brush mower on a tractor, studio view

Ventrac mower

Ventrac HQ682 Tough Cut

Brush mower for high grass, thick weeds, saplings and heavy brush.

68 incutting width
3counter-rotating blades
3.5-7 incut height
  • Large baffled front opening feeds material in
  • Heavy-duty welded deck shell
  • Flat-free caster wheels standard
  • Manual flip-up deck; hydraulic kit available
  • Integrated tie-down points
Full specifications
ModelHQ682
Part number (SKU)39.55118
Mower TypeRough
Cutting Positions3
Cutting Width68 in
Cutting Heights (Standard)3 in
Discharge TypeRear
Number of Blades3
Deck ConstructionMulti-Gauge
Cut Range with Front Castor Wheels3.5 in
Cut Range without Front Castors3 in
Length59 in
Overall Width69 in
Height18 in
Weight360 lb / 475 lb

Source: Ventrac HQ682 Tough Cut page.

Ventrac finish mower deck on a 4520 tractor, studio side view

Ventrac mower

Ventrac MS/MU Finish Mowers

Finish decks in 60 and 72 in side discharge and 72 in rear discharge.

60 / 72 incutting widths
18height positions
3blades
  • Single-lever height adjustment
  • Full-length rear roller for striping
  • High-strength steel deck
  • Optional hydraulic flip-up and mulch kits
Full specifications
ModelsMS600 60" Side Discharge Mower / MS720 72" Side Discharge Mower / MU720 72" Rear Discharge Mower
Part number (SKU)39.55110 / 39.55111 / 39.55114
Mower TypeFinish
Cutting Positions18 (positions 1-3: 1/8 in steps, positions 4-18: 1/4 in steps)
Cutting Width60 in / 72 in / 72 in
Cutting Heights (Standard)1 in
Deck Suspension2 front tires with full width rear roller
Discharge TypeSide / Side / Rear
Number of Blades3
Discharge DeflectorRubber / Rubber / -
Blade TypeHigh-lift / High-lift / Low-lift
Cutting Height Adjustment TypeSingle lever, quick select
Anti Scalp Rollers3
Spindles/PulleysField serviceable with bottom grease fittings
Length62.63 in / 66.13 in / 60.63 in
Height18.25 in
Weight490 lb / 550 lb / 540 lb
Width with Chute74.63 in / 86.5 in / (Does not have a chute)

Source: Ventrac Finish Mowers (MS600, MS720, MU720) page.

Ventrac MZ480 brush cutter deck on a tractor, studio view

Ventrac mower

Ventrac MZ480 Brush Cutter

The most aggressive brush deck in the Ventrac line, for brush up to 3 in thick.

48 incutting width
0.5 inthick breakaway blades
550 lbweight
  • Hinged front gate feeds dense brush to the blades
  • Two 0.5 in thick breakaway blades
  • Narrowest Ventrac mower, for tight access
  • Rear discharge
Full specifications
ModelMZ480
Part number (SKU)39.55119
Mower TypeRough
Cutting Width48 in
Discharge TypeRear
Number of Blades2
Blade Type0.5 in Thick Breakaway
Cutting Height Adjustment TypeAnti Scalp Wheels
Cut Height Position 13 in
Cut Height Position 25 in
Length70 in
Overall Width52 in
Height20 in
Weight550 lb

Source: Ventrac MZ480 Brush Cutter page.

Ventrac MJ840 Contour Mower with three decks on a tractor, studio view

Ventrac mower

Ventrac MJ840 Contour Mower

Three floating decks for precision mowing on golf courses and high-end properties.

83 incutting width
6blades
584 lbweight
  • Side decks move 40 degrees
  • Full rear rollers for even cutting and striping
  • Front rollers for anti-scalping
  • Flip-up deck with no tools or belt removal
  • Rear discharge
Full specifications
ModelMJ840
Part number (SKU)39.55160
Blade Length15 in
Anti Scalp Rollers5
Tip Speed16400 fpm
Front MountVentrac Mount System
Mower TypeFinish
Cutting Positions12
Cutting Width83 in
Cutting Heights (Standard)0.75 in
Deck Suspension4 front flat-free tires with 3 full rear rollers
Discharge TypeRear
Number of Blades6 (3 left hand, 3 right hand)
Blade Type15 in
Deck ConstructionMulti-Gauge
Length52 in
Overall Width84 in
Height22 in
Weight584 lb

Source: Ventrac MJ840 Contour Mower page.

Ventrac MK960 wide area mower deck on a tractor, studio view

Ventrac mower

Ventrac MK960 Wide Area Mower

A 95 in rear discharge deck for big lawns and public areas.

95 incutting width
1-5 incut range
580 lbweight
  • Tool-free height adjustment with two levers
  • Rear discharge trims from either side
  • Flip-up deck; optional hydraulic flip-up kit
  • Full floating finish deck
Full specifications
ModelMK960
Part number (SKU)39.55155
Cutting Width95 in
Weight580 lb
Length61 in
Height19.5 in

Source: Ventrac MK960 Wide Area Mower page.

Ventrac MA900 boom mower with raised sickle bar on a dual-wheel tractor, studio view

Ventrac mower

Ventrac MA900 Boom Mower

Out-front boom with a sickle bar head for banks, hedges, trails and water edges.

142 invertical reach from ground
115 inhorizontal reach, single wheels
0.5 inmax material cut
  • Front-mounted for visibility and control
  • Reaches over 9 feet from the tractor
  • Double action sickle bar cutting head
  • Folds into itself for a compact footprint
Full specifications
ModelMA900
Part number (SKU)39.55170
Cut Width39 in Double Action Sickle Bar
Max. Flat Top Cut82 in
Vertical Reach142 in From Ground
Horizontal Reach115 in From Outside of Single Wheels
Head Angle Range90° vertical
Material Cut Diameter0.5 in
Slope Ratings10° with single wheels, 18° with dual wheels

Source: Ventrac MA900 Boom Mower page.

Ventrac flail mower on a tractor, studio view

Ventrac mower

Ventrac MW/MY Flail Mowers

Fine Cut and Fast Cut flails that turn tall or dense growth into a finished cut.

56 / 72 incutting widths
3000 rpmrotor speed
0.5 inmax cutting size
  • Fine Cut (MW) with scoop knives for grassy areas
  • Fast Cut (MY) with Y knives for brush and vines
  • Height adjustment with 2 levers, no tools
  • Flip-up deck
Full specifications
ModelsMW562 56" Flail Mower - Fine Cut / MW722 72" Flail Mower - Fine Cut / MY562 56" Flail Mower - Fast Cut / MY722 72" Flail Mower - Fast Cut
Part number (SKU)39.55146 / 39.55147 / 39.55148 / 39.55149
Cutting Width56 in / 72 in / 56 in / 72 in
Length64.5 in / 63.5 in / 64.5 in / 63.5 in
Width63 in / 79 in / 63 in / 79 in
Height27.75 in
Weight655 lb / 730 lb / 660 lb / 735 lb
Blade TypeScoop / Scoop / Y / Y
Blade Count24 / 36 / 24 / 72
Rotor Diameter12.5 in
Rotor Direction-of-OperationForward
Rotor Speed (at 3600 Tractor RPM)3000 rpm
Oscillation Amount- / - / 9.3 in (Over Rear Roller Width) / 9.3 in (Over Rear Roller Width)
Height of Cut Adjustment1 in
Max. Cutting Size0.5 in
Flip UpYes
Height Adjustment2 levers, no tools required

Source: Ventrac Flail Mowers (MW562, MW722, MY562, MY722) page.

Ventrac MR770 three-unit reel mower on a tractor, studio view

Ventrac mower

Ventrac MR770 Reel Mower

Trim and surrounds reel mower that works on slopes up to 30 degrees.

77 inwidth of cut
3reel units
8blades per reel
  • Variable speed hydraulic reels
  • Back lapping valves standard
  • Optional roller brush kit
  • Runs on a dual-wheel 4520 on hills
Full specifications
ModelMR770
Part number (SKU)39.55131
Mower TypeFinish
Cutting PositionsInfinite
Cutting Width77 in
Cutting Heights (Standard)0.375 in
Deck SuspensionFront Roller (grooved) Rear Roller (smooth)
Discharge TypeFront or Rear
Flip-Up DeckNot Available
Length52 in
Overall Width83.5 in
Height26 in
Weight775 lb
Reel DriveHydraulic
Cutting Units3
Reel SpeedVariable
BacklappingStandard
Reel Diameter7 in
Reel Blades8
AdjustmentBed knife to Reel

Source: Ventrac MR770 Reel Mower page.

Ventrac KX two-stage snow blower on a cab tractor, studio view

Ventrac snow and debris attachment

Ventrac KX Snow Blower

Two-stage blowers in 48 and 52 in widths that throw snow up to 40 feet.

4500 lb/minsnow capacity (KX523)
35-40 ftblowing distance
180°hydraulic chute
  • 16 in solid auger
  • Chute rotates 180 degrees from the seat
  • Cast iron skid shoe discs and hardened steel side shoes
  • Reversible hardened steel cutting edge
Full specifications
ModelsKX523 52" Snowblower / KX480 48" Snowblower
Part number (SKU)39.55427 / 39.55428
Blowing Distance35 ft - 40 ft Approx
Cutting Height26.5 in (no aux. auger)
Chute Rotation180°
Directional ControlHydraulic
Aux. Auger Dia.8 in
Fan Diameter19.5 in
Main Auger RPM197 rpm
Auger Diameter16 in
Snow Capacity4500 lb/min
Fan RPM790 rpm
Overall Width52 in / 48 in
Length49 in
Height56.5 in
Weight517 lb / 490 lb
Width with Wings52.75 in / 48.75 in

Source: Ventrac Snow Blower (KX523, KX480) page.

Ventrac KD power angle blade on a cab tractor, studio view

Ventrac snow and debris attachment

Ventrac KD Power Angle Blades

Straight blades in 48, 60 and 72 in for snow, grading, leveling and backfill.

48 / 60 / 72 inworking widths
30°angle left or right
13 inground clearance
  • Trip position for plowing, locked for digging
  • Adjustable skid shoes for gravel drives
  • Raise, lower and angle with the S.D.L.A. control
  • Can run on the rear 3-point hitch with the 3-N-1 adapter
Full specifications
ModelsKD482 48" Dozer Blade / KD602 60" Dozer Blade / KD722 72" Dozer Blade
Part number (SKU)39.55251 / 39.55252 / 39.55253
Max Angle (Left/Right)30°
Ground Clearance13 in @ 0 deg.
Skid Shoesadjustable cast iron skid shoe discs
Spring TripMechanical On/Off
Hydraulic Cylinder Bore and Stroke2 in x 8 in
Front MountVentrac Mount System
Length27 in
Overall Width48 in / 60 in / 72 in
Height22 in
Weight163 lb / 203 lb / 225 lb
Working Width48 in / 60 in / 72 in
Working Width 30°42 in / 52 in / 62 in

Source: Ventrac Blades (KD482, KD602, KD722) page.

Ventrac SE530 V-blade on a cab tractor, studio view

Ventrac snow and debris attachment

Ventrac SE530 V-Blade

V-blade snow plow with wings that sweep forward or back.

53.13 inwidth
325 lbweight
  • Wings swept forward or back
  • Low profile fits under awnings and building overhangs
Full specifications
ModelSE530
Part number (SKU)39.55275
Length33 in
Width53.13 in
Height23.5 in
Width (Wings Swept Back)47.5 in
Width (Wings Swept Forward)48.88 in
Weight325 lb

Source: Ventrac SE530 V-Blade page.

Ventrac SP720 box plow on a tractor, studio view

Ventrac snow and debris attachment

Ventrac SP720 Box Plow

High-capacity box plow for clearing and stacking snow in open areas.

72 inclearing width
410 lbweight
  • Wings keep snow in the box
  • Hardened steel cutting edge with trip edge
  • Optional turf edge kit for fields
Full specifications
ModelSP720
Part number (SKU)39.55278
Overall Width77.38 in
Overall Length48.25 in
Weight410 lb
Overall Height26.25 in
Plow Clearing Width72 in

Source: Ventrac SP720 Box Plow page.

Ventrac KJ520 broom on a cab tractor, studio front view

Ventrac snow and debris attachment

Ventrac KJ520 Broom

Narrow broom for snow, leaves, dirt, light gravel and thatch on 48 in walks.

52 inworking width
48 inangled width
30°angle left or right
  • Hydraulic angle and lift with S.D.L.A. controls
  • Top-mounted hydraulic motor for tight areas
  • 45% more hydraulic power than the HB580
  • Optional actuator for speed and reverse rotation
Full specifications
ModelKJ520
Part number (SKU)39.55401
RotationForward/Reverse
Max Angle (Left/Right)30°
Broom Diameter24 in
Angled Working Width48 in
Length58 in
Overall Width61 in
Height32.5 in
Working Width52 in
Weight500 lb

Source: Ventrac KJ520 Broom page.

Ventrac SB350 brine system mounted on a 4520 tractor with winter cab

Ventrac snow and debris attachment

Ventrac SB350 Brine System

Liquid de-icing for the 4520, controlled from inside the heated cab.

35 galtank
48 inspray width
5nozzles
  • 8 ft spray wand standard for steps and entryways
  • Optional 25 ft hose reel kit
  • Integrates with the tractor controls
Full specifications
ModelSB350
Part number (SKU)70.4192
Tank Capacity35 gal
Pump Flow5.3gpm
Number of Nozzles5
Spray Width48 in
Length26.5 in
Width36.5 in
Height38 in
Dry Weight100 lb

Source: Ventrac SB350 Brine System page.

Ventrac ET202 turbine blower attachment, studio right side view

Ventrac snow and debris attachment

Ventrac ET202 Turbine Blower

Moves large volumes of air for leaves, light snow and debris, much quieter than a conventional leaf blower.

12 innozzle
290 lbweight
  • Front nozzle rotates 360 degrees hydraulically
  • Front bumper protects the nozzle
  • Clears sidewalks and parking lots
Full specifications
ModelET202
Part number (SKU)39.55341
Length69.25 in
Width28 in
Weight290 lb
Nozzle Size12 in
Height (nozzle turned down)36 in
Height (nozzle turned up)42.5 in

Source: Ventrac ET202 Turbine Blower page.

Ventrac KA160 power blower on a tractor, studio view

Ventrac snow and debris attachment

Ventrac KA160 Power Blower

Vertical shaft blower for leaves, light snow and water.

180 mphmax wind speed
4000 cu. ft. / Mindischarge volume
170 lbweight
  • Housing rotates 180 degrees with the standard hydraulic motor
  • Two gauge wheels hold a steady distance
  • Quiet vertical shaft design
Full specifications
ModelKA160
Part number (SKU)39.55440
Discharge Volume4000 cu. ft. / Min
Max Wind Speed180 mph
Rotation180°
Fan Blades16
Fan Diameter16 in
Front MountVentrac Mount System
Length36 in
Overall Width23.5 in
Height20 in
Weight170 lb

Source: Ventrac KA160 Power Blower page.

Ventrac EF300 leaf plow attachment with bristle edge, studio view

Ventrac snow and debris attachment

Ventrac EF300 Leaf Plow

Moves deep layers of leaves that stack up faster than a blower can handle.

78 inworking width
50 inheight
265 lbweight
  • Dual bristle stack sweeps without gouging turf
  • Flexible containment wings near trees
  • Adjustable caster wheels
Full specifications
ModelEF300
Part number (SKU)39.55205
Height50 in
Working Width78 in
Overall Length36 in
Weight265 lb
Caster WheelsAdjustable
Edge8 in Dual Bristle Stack

Source: Ventrac EF300 Leaf Plow page.

Ventrac NX340 snowblower on the SSV sidewalk snow vehicle, studio view

Ventrac snow and debris attachment

Ventrac NX340 Snowblower (SSV)

A 34 in commercial snow blower for the SSV and narrow sidewalks.

34 inoverall width
12 inauger
350 lbweight
  • Hardened steel cutting edge
  • Adjustable skid shoes
  • Hydraulic chute direction control
  • Optional deep snow auger kit
Full specifications
ModelNX340
Part number (SKU)39.65115
Directional ControlHydraulic
Fan Diameter18 in
Auger Diameter12 in
Length47 in
Overall Width34 in
Height51 in
Weight350 lb

Source: Ventrac NX340 Snowblower (SSV) page.

Ventrac ND snow plow blade on the SSV, studio view

Ventrac snow and debris attachment

Ventrac ND Snow Plow (SSV)

SSV blades in 42 and 54 in; the 42 in angles to fit a 36 in sidewalk.

42 / 54 inblade widths
11 inraised clearance
  • Angles left or right
  • Hardened steel cutting edge standard
  • Optional poly edge for pavers and uneven walks
Full specifications
ModelsND420 42" Snow Plow / ND540 54" Snow Plow
Part number (SKU)39.65110 / 39.65111
Overall Width42 in / 54 in
Working Width42 in / 54 in
Overall Length21 in
Angled Width36 in / 47 in
Overall Height19.5 in
Ground Clearance in Raised Position11 in

Source: Ventrac ND Snow Plow (ND420, ND540) page.

Ventrac NV360 V-blade on the SSV, studio view

Ventrac snow and debris attachment

Ventrac NV360 V-Blade (SSV)

V-blade for the SSV sidewalk snow vehicle.

36 inwide
115.6 kgweight
  • Fits the SSV Mount System
  • Wings set forward or back
Full specifications
ModelNV360
Part number (SKU)39.65120
Front MountSSV Mount System
Overall Width91.4cm
Height54.6cm
Weight115.6 kg
Overall Length61cm
Overall Width (Wings Back)91.4cm
Overall Width (Wings Forward)81.3cm

Source: Ventrac NV360 V-Blade (SSV) page.

Ventrac NJ380 38 inch broom on the SSV, studio view

Ventrac snow and debris attachment

Ventrac NJ380 Broom (SSV)

A 38 in broom for narrow sidewalks that angles to 35 in.

38 inworking width
35 inangled width
350 lbweight
  • Caster wheels set brush aggressiveness
  • Reverse the bristles to pull snow from doorways
Full specifications
ModelNJ380
Part number (SKU)39.65100
Overall Width44 in
Height29 in
Weight350 lb
Working Width38 in
Overall Length45 in
Angled Width35 in

Source: Ventrac NJ380 Broom (SSV) page.

Ventrac NE380 snow bucket on the SSV, studio view

Ventrac snow and debris attachment

Ventrac NE380 Snow Bucket (SSV)

Hydraulic snow bucket for the SSV that lifts, rolls and tips loads of snow.

38 inworking width
4.75 cu. ft.capacity
170 lbweight
  • Attaches to the SSV platform
Full specifications
ModelNE380
Part number (SKU)39.65130
Overall Width44 in
Working Width38 in
Overall Length26 in
Weight170 lb
Overall Height17 in
Capacity (Volume)4.75 cu. ft.
Ground Clearance in Raised Position11.5 in
Ground Clearance in Dump Position10 in

Source: Ventrac NE380 Snow Bucket (SSV) page.

Ventrac KM500 loader with bucket on a tractor, studio view

Ventrac site prep attachment

Ventrac KM500 Loader

Loader for the 4520 for landscape, hardscape, site work and tree care.

700 lblift capacity
52 inmax lift height
1/6 Yardbucket
  • Turf-friendly on a dual-wheel tractor
  • Compact for tight spaces
  • Not compatible with the KW454 winter cab
Full specifications
ModelKM500
Part number (SKU)39.55601
Overall Width42 in | 49 in with Bucket
Overall Length47 in | 68 in with Bucket
Weight475 lb Loader Only
Overall Height42 in
Capacity1/6 Yard
Accessory Weight125 lb Standard Bucket
Max Lift Height52 in
Lift Capacity700 lb

Source: Ventrac KM500 Loader page.

Ventrac HE482 power bucket on a tractor, studio view

Ventrac site prep attachment

Ventrac HE482 Power Bucket

Hydraulic bucket for soil, sand, gravel, mulch, debris and snow.

6 cu. ft.bucket capacity
48 inworking width
190 lbweight
  • Hydraulically controlled from the seat
  • Sits upright after detaching for quick reconnect
  • Extensions raise capacity from 6 to 10.5 cubic feet
Full specifications
ModelHE482
Part number (SKU)39.55214
Bucket Capacity6 cu. ft.
Dump Angle51° @ Full Height
Length34 in
Overall Width53 in
Weight190 lb
Working Width48 in
Max Ground Clearance, Raised9.25 in
Max Ground Clearance, Dumped7.38 in
Length with Teeth35.25 in
Length with Grapple39.25 in
Height with Grapple23 in
Weight with Grapple265 lb
Height16 in

Source: Ventrac HE482 Power Bucket page.

Ventrac HE200 power grapple on a tractor, studio view

Ventrac site prep attachment

Ventrac HE200 Power Grapple

Rock and root grapple bucket that clamps logs, rocks and brush.

22 ingrapple opening
53.5 inoverall width
310 lbweight
  • Open bottom lets dirt fall through
  • Grapple runs on second auxiliary hydraulics
  • For clearing and land reclamation
Full specifications
ModelHE200
Part number (SKU)39.55211
Overall Width53.5 in
Overall Length42 in
Weight310 lb
Grapple Opening22 in
Overall Height24 in
Ground Clearance in Dump Position7 in
Ground Clearance with Frame Level15 in

Source: Ventrac HE200 Power Grapple page.

Ventrac KG540 power rake on a tractor, studio view

Ventrac site prep attachment

Ventrac KG540 Power Rake

Reshapes uneven ground, preps new lawns and refreshes gravel drives.

72carbide tips
18° Left/Righthydraulic angle
655 lbweight
  • Rotor speed, angle, depth and direction adjust on the fly
  • Hydraulic drum height adjust
  • Removable pivoting front axle for work near structures
Full specifications
ModelKG540
Carbide Tips72 (replaceable)
Hydraulic Angle18° Left/Right
Part number (SKU)39.55436
Overall Length65 in
Overall Width63.5 in
Overall Height34 in
Weight655 lb
Rotor Depth Adjustment (below level)+2 in/-6 in

Source: Ventrac KG540 Power Rake page.

Ventrac KR502 landscape rake on a tractor, studio view

Ventrac site prep attachment

Ventrac KR502 Landscape Rake

A 49 in front-mounted rake for soil prep, leveling and rock removal.

49 inoverall width
69 inwidth with wings
28°angle left or right
  • Curved tines work in either direction
  • Front mounted so material is not driven over
  • Rear 3-point mounting with the 3-N-1 adapter
Full specifications
ModelKR502
Part number (SKU)39.55431
Width w/ Wings69 in
Tine Adjustment6 in
Angle of degree to right or left28°
Min. Length53.5 in
Digging Depth3 in
Front MountVentrac Mount System
Overall Width49 in
Height32 in
Weight250 lb
Max Length59 in

Source: Ventrac KR502 Landscape Rake page.

Ventrac DC520 soil cultivator on a tractor, studio view

Ventrac site prep attachment

Ventrac DC520 Soil Cultivator

Prepares a soft, even seedbed from bare or compacted soil.

52 inworking width
5 indepth of till
630 lbweight
  • Cultivator tines pulverize the soil
  • Separator tines bury rock and debris
  • Distribution blade spreads sifted soil
Full specifications
ModelDC520
Part number (SKU)39.55226
Working Speed1 - 3 mph Variable with conditions
Depth of Till5 in
Working Width52 in
Width65.88 in
Height25.25 in
Weight630 lb

Source: Ventrac DC520 Soil Cultivator page.

Ventrac KL480 tiller on a tractor, studio view

Ventrac site prep attachment

Ventrac KL480 Tiller

Front-mounted tiller for gardens and yards that you can watch as you work.

48 inworking width
6 inmax till depth
356 lbweight
  • Twenty-four high carbon steel tines
  • Enclosed, lubricated #80 chain final drive
  • Skid shoes set depth
  • Storage stand included
Full specifications
ModelKL480
Part number (SKU)39.55220
Max Till Depth6 in
Front MountVentrac Mount System
Length41 in
Overall Width53 in
Height22 in
Weight356 lb
Working Width48 in

Source: Ventrac KL480 Tiller page.

Ventrac KY400 trencher digging in soil on a 4520 tractor

Ventrac site prep attachment

Ventrac KY400 Trencher

Trenches up to 40 in deep with a 5.5 in cut, without track damage to turf.

40 intrench depth
5.5 intrench width
43cutting teeth
  • Dual Push-N-Pull boom cylinders
  • Carbide-tipped combo chain, bolt-on teeth
  • Light footprint in tight spaces
Full specifications
ModelKY400
Part number (SKU)39.55455
Trenching Depth40 in
Trenching Width5.5 in
Cutting Teeth43
Length with Crumber81 in
Front MountVentrac Mount System
Length74.5 in
Overall Width40 in
Height29.75 in
Weight480 lb

Source: Ventrac KY400 Trencher page.

Ventrac KC220 stump grinder on a tractor, studio view

Ventrac site prep attachment

Ventrac KC220 Stump Grinder

A 22 in rotor with 18 carbide teeth for large or small stumps.

1300 rpmrotor speed
8 incutting depth
22 incutter wheel
  • Offset, out-front grinding for visibility
  • Cutting controlled with hydrostatic forward and reverse
  • Material blade clears the work area from the seat
Full specifications
ModelKC220
Part number (SKU)39.55301
Cutting Depth8 in below ground
Rotor Speed1300 rpm
Carbide Tips18 (replaceable)
Cutter Wheel Dia.22 in
Overall Length41 in
Overall Width51 in
Overall Height23 in
Weight420 lb

Source: Ventrac KC220 Stump Grinder page.

Ventrac EA600 AERA-vator on a tractor, studio view

Ventrac turf care attachment

Ventrac EA600 AERA-vator

Vibrating-tine aerator that loosens soil without pulling plugs.

60 inworking width
2.75 invibration depth
420 lbweight
  • Turf is ready to use right after treatment
  • Optional over seeder reseeds while aerating
  • Hole size set by drive speed
Full specifications
ModelEA600
Part number (SKU)39.55460
Opt. Seeder cap.2.5 cu. ft.
Seeder Wt.102 lb
Vibration Depth2.75 in
Aeration Density8holes/f2
Tines0.5625 in - 3.5 in
Shaft Speed800Cycles Per Minute
Optimal Engine Speed3200 rpm
Length34 in
Overall Width66 in
Height22 in
Weight420 lb
Working Width60 in
Overall Height with Optional Seeder32 in
Overall Width with Optional Seeder67.5 in

Source: Ventrac EA600 AERA-vator page.

Ventrac EB480 aerator with spoon tines on a tractor, studio view

Ventrac turf care attachment

Ventrac EB480 Aerator

Aerator with open spoon, slicer or core tines that swap in minutes.

48 inworking width
240 lbweight
496 lbwith 6 weights
  • Three tine options: core, fracture or slice
  • Replace single tines or whole mounting heads
Full specifications
ModelsEB480 Open Spoon Tine / EB480 Slitter/Slicer Tine / EB480 Core Tine
Part number (SKU)39.55490 / 39.55492 / 39.55494
Length30 in
Overall Width54 in
Height26.25 in
Weight240 lb
Working Width48 in
Total Weight with 6 Weights496 lb

Source: Ventrac Aerator (EB480F, EB480S, EB480C) page.

Ventrac EW530 Weedbine on a tractor, studio view

Ventrac turf care attachment

Ventrac EW530 Weedbine

Mechanical weed control for cool-season grass, no chemicals.

2 in - 5 ingrass height range
1600 rpmbrush speed
  • Rotating bristles sweep weeds into a serrated auger
  • Tool-less height adjustment
  • For parks, playgrounds and sports fields
Full specifications
ModelEW530
Bristle MaterialNylon 6.6
RPM on Auger4800 rpm
RPM on Brush1600 rpm
Part number (SKU)39.55485
Operating Height Range2 in - 5 in
Length35 in
Overall Width65 in
Height21 in

Source: Ventrac EW530 Weedbine page.

Ventrac RV602 collection vacuum on a 4520 tractor mowing a striped lawn

Ventrac turf care attachment

Ventrac RV602 Collection Vacuum

Grass and leaf vacuum with a bin that lifts to dump into a trailer.

16 cu. ft.bin capacity
5 ftdump height
10 hpVanguard engine
  • Bin mounts to the rear of 4000 series tractors
  • Quick disconnect hose for beds and steps
  • Bin raises hydraulically to five feet
Full specifications
ModelRV602
Part number (SKU)39.55361
Lifting Time5 seconds
Lift Capacity300 lb
Lifting Height5 ft
Max. Capacity16 cu. ft.
Width with Tractor66 in
Length with Tractor no mower104 in
Recommended capacity (for best results)13 cu. ft.
Lowering Time4secs
Impeller, Blades5 blade
Engine ManufacturerB&S Vanguard
Horsepower10 hp
Fuel TypeGas
Engine RPM3600
Engine TypeSingle cylinder, horizontal shaft
Length40 in
Overall Width65 in
Height53 in
Weight525 lb

Source: Ventrac RV602 Collection Vacuum page.

Ventrac EG520 primary seeder on a tractor, studio view

Ventrac turf care attachment

Ventrac EG520 Primary Seeder

Plants grass seed into bare soil at a steady, accurate rate.

5 cu. ft.hopper
52 inworking width
720 lbweight
  • Removable calibration tray
  • Front packer roller smooths the seedbed
  • Offset rear roller covers the seed
Full specifications
ModelEG520
Part number (SKU)39.55227
Hopper Capacity5 cu. ft.
Recommended Travel Speed3 mph - 5 mph
Recommended Operation DirectionForward (can run in reverse, but may briefly stop dropping seed when changing direction)
Acceptable Seed TypesAll typical grass seed types
Length41.25 in
Weight720 lb
Working Width52 in
Width57.75 in
Height30.5 in

Source: Ventrac EG520 Primary Seeder page.

Ventrac EC240 sod cutter on a tractor, studio view

Ventrac turf care attachment

Ventrac EC240 Sod Cutter

A 24 in knife that cuts sod for beds, walkways and lawns.

24 incutting width
2.5 inmax cutting depth
38 lbweight
  • Clean, consistent cut
  • Lifts turf into neat rolls
  • Also shaves dirt for site prep or irrigation trenches
Full specifications
ModelEC240
Part number (SKU)39.55520
Cutting Depth2.5 in
Box Wt41 lb
Cutting Width24 in
Length24.5 in
Overall Width25 in
Height10.25 in
Weight38 lb

Source: Ventrac EC240 Sod Cutter page.

Ventrac ED202 edger on a tractor, studio view

Ventrac turf care attachment

Ventrac ED202 Edger

Edges sidewalks, curbs, cart paths and flower or mulch beds.

20 indisc
6 inmax cutting depth
200 lbweight
  • Edge on the right or left side
  • Reversible cutting disc
  • Optional blower edges and clears in one pass
Full specifications
ModelED202
Part number (SKU)39.55332
Length45 in
Overall Width54 in - 66 in
Height21 in
Weight200 lb
Weight with Blower230 lb
Disc Diameter20 in
Max Cutting Depth6 in

Source: Ventrac ED202 Edger page.

Ventrac DR540 ballpark groomer on a tractor

Ventrac turf care attachment

Ventrac DR540 Ballpark Groomer

Infield groomer with brush and drag kits for a finished playing surface.

60.5 inoverall width
28spikes
315 lbweight
  • Multiple grooming accessories
  • Brush and drag kits
  • Reduces infield hand work
Full specifications
ModelDR540
Part number (SKU)39.55285
Overall Width60.5 in
Height26.25 in
Weight315 lb
Overall Length19 in
Overall Length with Brush Kit23.5 in
Overall Width with Brush Kit75.5 in
Overall Width with Drag Kit73 in
Weight of Brush Kit451 lb
Weight of Drag Kit with Steel Drag137 lb
Weight of Steel Drag86 lb
Weight of Drag Kit with Coco Mat Drag135 lb
Weight of Coco Mat Drag84 lb
Overall Length with Drag Kit69.5 in
Number of Spikes28

Source: Ventrac Ballpark Groomer and Renovator page, DR540 column.

Ventrac DG550 renovator with blades and wheels on a tractor, studio view

Ventrac turf care attachment

Ventrac DG550 Renovator

Renovation blades for infield grass creep and warning track weeds.

2.5 inmax cutting depth
56 inoverall width
255 lbweight
  • Hydraulic cutting depth adjustment
  • Three renovator blades and 28 scarifier tines
  • Light renovation and re-leveling
Full specifications
ModelDG550
Part number (SKU)39.55280
Overall Width56 in
Height19 in
Weight255 lb
Overall Length46 in
Renovator Blades18.5 in Three Blades
Cutting Depth AdjustmentHydraulic
Cutting Depth (Maximum)2.5 in
Scarifier Spring Tines28 Tines
Wheels9 in flat free

Source: Ventrac Ballpark Groomer and Renovator page, DG550 column.

Ventrac tractors at a glance

Model4520N4520P4520Y45RCSSV Sidewalk Snow Vehicle
Engine ManufacturerKubotaKawasakiKubotaKubotaVanguard
Horsepower32.5 hp31 hp25 hp32.5 hp23 hp
Fuel TypeGasGasDieselGasGas
Fuel Capacity6 gal6 gal6 gal6 gal3.3 gal
Overall Width48.5 in48.5 in48.5 in48.5 in34 in
Weight1700 lb1620 lb1705 lb2160 lb970 lb

Mowing attachments at a glance

ModelMP270 Post MowerHQ682 Tough CutMS/MU Finish MowersMZ480 Brush CutterMJ840 Contour MowerMK960 Wide Area MowerMW/MY Flail MowersMR770 Reel Mower
Cutting Width27 in68 in60 in / 72 in / 72 in48 in83 in95 in56 in / 72 in / 56 in / 72 in77 in
Discharge TypeSideRearSide / Side / RearRearRear––Front or Rear
Number of Blades13326 (3 left hand, 3 right hand)–––
Weight400 lb360 lb / 475 lb490 lb / 550 lb / 540 lb550 lb584 lb580 lb655 lb / 730 lb / 660 lb / 735 lb775 lb

Snow and debris attachments at a glance

ModelKX Snow BlowerKD Power Angle BladesSE530 V-BladeSP720 Box PlowKJ520 BroomSB350 Brine SystemET202 Turbine BlowerKA160 Power BlowerEF300 Leaf PlowNX340 Snowblower (SSV)ND Snow Plow (SSV)NV360 V-Blade (SSV)NJ380 Broom (SSV)NE380 Snow Bucket (SSV)
Overall Width52 in / 48 in48 in / 60 in / 72 in–77.38 in61 in––23.5 in–34 in42 in / 54 in91.4cm44 in44 in
Working Width–48 in / 60 in / 72 in––52 in–––78 in–42 in / 54 in–38 in38 in
Height56.5 in22 in23.5 in–32.5 in38 in–20 in50 in51 in–54.6cm29 in–
Weight517 lb / 490 lb163 lb / 203 lb / 225 lb325 lb410 lb500 lb–290 lb170 lb265 lb350 lb–115.6 kg350 lb170 lb

Material handling and site prep attachments at a glance

ModelKM500 LoaderHE482 Power BucketHE200 Power GrappleKG540 Power RakeKR502 Landscape RakeDC520 Soil CultivatorKL480 TillerKY400 TrencherKC220 Stump Grinder
Overall Width42 in | 49 in with Bucket53 in53.5 in63.5 in49 in–53 in40 in51 in
Working Width–48 in–––52 in48 in––
Height–16 in––32 in25.25 in22 in29.75 in–
Weight475 lb Loader Only190 lb310 lb655 lb250 lb630 lb356 lb480 lb420 lb

Turf care and specialty attachments at a glance

ModelEA600 AERA-vatorEB480 AeratorEW530 WeedbineRV602 Collection VacuumEG520 Primary SeederEC240 Sod CutterED202 EdgerDR540 Ballpark GroomerDG550 Renovator
Overall Width66 in54 in65 in65 in–25 in54 in - 66 in60.5 in56 in
Working Width60 in48 in––52 in––––
Height22 in26.25 in21 in53 in30.5 in10.25 in21 in26.25 in19 in
Weight420 lb240 lb–525 lb720 lb38 lb200 lb315 lb255 lb

Genuine Ventrac parts and manuals

Ventrac lists genuine parts by equipment model in its online parts store, and owner's manuals are on its Product Support page. Bring your model number to the Clinton parts counter and we order the genuine Ventrac part.

  • Mower blades
  • Attachment belts
  • Tractor belts
  • Air, fuel, oil and hydraulic filters
  • Spindles
  • Cutting edges
  • Poly edges
  • Tines
  • Teeth
  • Tires
  • Winter brushes
  • Owner's manuals
Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

Built into every Ventrac 4520

V-Plus 2-year commercial warranty

New SSV, 3000 and 4000 series tractors and attachments: 2 years with unlimited hours.

Warranty terms

All new Ventrac tractors and attachments purchased in the United States and Canada are covered by Ventrac's V-Plus Warranty.

2-Year Commercial Limited Warranty: SSV/3000/4000 series tractors and attachments, 2 years with unlimited hours.

Engines are covered by the engine manufacturer: Kawasaki V-twins and B&S Vanguard V-twins 3-year; B&S Vanguard 3/LC 2-year with 3rd year major parts only.

Kubota 3 cylinder engines: 2-year or 2000 hours, with 3rd year major parts only or 3000 hours, whichever occurs first.

Replacement parts are limited to 90 days. Proof of purchase may be required.

Built in Orrville, Ohio

Ventrac tractors and attachments have been built in Ohio for over 20 years.

Where Ventrac is made

Corporate offices at 500 Venture Drive, Orrville, Ohio house research and development, fabrication and welding, service, tractor assembly lines, and parts and warehouse facilities.

Fabrication is controlled with CNC machines, and much of the welding is done by robotic welders.

Options

Ventrac lists kits and accessories for the 4520 and SSV, including a factory-installed PRO upgrade on the 4520. Fit varies by model; ask us which ones match your machine.

Also available

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday
Get directions(315) 853-6151

Driving distance

  • New Hartford 6 mi
  • Utica 9 mi
  • Rome 14 mi
  • Oneida 17 mi
  • Hamilton 20 mi
  • Herkimer 26 mi
  • Cazenovia 31 mi
  • Norwich 42 mi
  • Cooperstown 47 mi
  • Syracuse 49 mi
  • Oneonta 60 mi
  • Cortland 61 mi

Before you visit

Can I see Ventrac tractors and attachments in person?

Call (315) 853-6151 before you drive over and ask which Ventrac tractors and attachments we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.