(315) 853-6151
Landscaping crew in high-visibility gear unloading Kress battery blowers and tools from a trailer

Kress Battery Tools and Mowers Dealer in Central New York

Kress makes battery-powered outdoor power equipment: 60 V Commercial trimmers, hedge trimmers, blowers, a chainsaw and a mower, the 8-minute CyberSystem, and RTKn robotic mowers. Clinton Tractor in Clinton, NY is a Kress dealer.

Call (315) 853-6151 Compare models Parts diagrams

60 V commercial string trimmers, edgers and brush cutter

Kress designs its Commercial trimmers for landscaping companies and municipalities. Each runs on the 60 V CyberSystem, and the maker says it costs less to run than gas.

60 V commercial hedge trimmers

Handheld and pole hedge trimmers with laser-cut blades. Several models also run from the CyberPack backpack battery and belt.

60 V commercial blowers, chainsaw and mower

Three backpack blowers with QuietStorm low-noise technology, a 16-inch chainsaw and a 21-inch self-propelled mower, all 60 V Commercial tools.

CyberSystem batteries and chargers

The CyberSystem is Kress's 60 V battery and charging platform for its Commercial tools. The maker says its 8-minute CyberPack batteries charge faster than they discharge and are rated for 3,000 cycles.

RTKn robotic mowers for large properties

Kress RTKn mowers use satellite guidance with no boundary wire and no antenna on the property. The four Mega models here are rated for 3 to 7 acres (4.5 to 10.5 acres at the 72-hour cutting interval) and can run as a fleet.

Kress history: electric motors since 1928

Kress started in 1928, when Christian Kress founded a workshop for car electronics. It soon began designing DC and AC electric motors, and the maker says it has never built an internal combustion engine.

A new factory in Bisingen, Germany began making stationary workshop machines in 1964, and in 1969 Kress launched a professional range of portable power tools. Kress joined the Positec group in 2017 and turned to cordless outdoor power equipment for commercial landscapers and homeowners. In 2023 it launched the 8-minute CyberSystem battery platform.

  1. 1928Christian Kress founds a workshop for car electronics and starts building electric motors.
  2. 1964A new factory in Bisingen, Germany begins making stationary workshop machines.
  3. 1969Kress launches a professional range of portable power tools.
  4. 1979A new R&D center is established in Wattwil, Switzerland.
  5. 2017Kress joins the Positec group and moves into cordless outdoor power equipment.
  6. 2023Kress launches the 8-minute CyberSystem battery platform.
Two landscapers in high-visibility gear clearing leaves from a tree-lined path with Kress backpack blowers

Compare Kress battery tools and mowers

Search all 29 Kress tools, batteries and robotic mowers by line, name or feature.

Showing all 29 models

Landscaper in high-visibility gear trimming leaf-covered ground with a Kress KC100.9 string trimmer

Kress Commercial trimmer

Kress KC100.9

Straight-shaft string trimmer with a quick-load head, built for everyday landscaping and dense growth.

1.5 kWoutput
45 ccgas equivalent
3speed settings
30 ftline reload
  • Quick-load head with 30 ft spool capacity
  • Heavy-duty steel driveshaft
  • Aluminium gearhead
  • Takes a trimmer head or knife blade
  • Kress-built brushless motor, IPX5
Full specifications
Voltage60 V
Line feed systemBump feed
Cutting speed4200/5100/5900 rpm
Cutting width16 17/32 in
Line diameter0.095 / 0.105 in
Trimmer head typeRapid reload
Line reload length30 ft
Weight10 lbs
Water protection index (IP code)IPX5
Motor typeBrushless

Source: Kress KC100.9 page.

Landscaper trimming around shrubs with a Kress KC110.9 front-motor string trimmer

Kress Commercial trimmer

Kress KC110.9

Light front-motor string trimmer for precise trimming with less fatigue.

0.9 kWoutput
31 ccgas equivalent
6.5 lbsweight
2speed settings
  • Front motor for balance and maneuverability
  • Extremely low vibration level
  • Rapid line reload head
  • Cutting head compatible with knife blade
  • Kress-built brushless motor, IPX5
Full specifications
Voltage60 V
Line feed systemBump feed
Cutting speed4500/5500 rpm
Cutting width16.5 in
Line diameter0.095/0.105 in
Trimmer head typeRapid reload
Line reload length13 ft
Weight6.5 lbs
Water protection index (IP code)IPX5
Motor typeBrushless

Source: Kress KC110.9 page.

Landscaper working along a garden path with a Kress KC120.9 multi-attachment trimmer

Kress Commercial trimmer

Kress KC120.9

Multi-attachment power head that runs a string trimmer and converts to a brush cutter, edger, hedge trimmer or pole saw.

1.3 kWoutput
25 ccgas equivalent
6attachments
9.4 lbswithout battery
  • Supports 6 different attachments
  • Rapid line reload head
  • 2 pre-set speeds with variable speed trigger
  • Kress aluminum gearhead
  • Kress-built brushless motor, IPX5
Full specifications
Voltage60 V
Line feed systemBump feed
Cutting speed4500/5900 rpm
Cutting width16.5 in
Line diameter0.095/0.105 in
Trimmer head typeRapid reload
Line reload length13 ft
Weight without battery9.4 lbs

Source: Kress KC120.9 page.

Worker in yellow rain gear edging a lawn beside a hedge with a Kress KC150.9 edger

Kress Commercial trimmer

Kress KC150.9

Straight-shaft edger with a height-adjustable guide wheel and debris guard.

1.5 kWoutput
45 ccgas equivalent
8 inblade
3speed settings
  • Rigid drive shaft
  • Easy height adjustment
  • Contoured magnesium guard
  • 3 pre-set speeds with variable speed trigger
  • Kress-built brushless motor, IPX5
Full specifications
Voltage60 V
Cutting speed3000/3600/4200 rpm
Blade length7 7/8 in
Weight without battery11.6 lbs
Blade size8 in
Water protection index (IP code)IPX5
Motor typeBrushless

Source: Kress KC150.9 page.

Landscaper edging along a curved sidewalk with a Kress KC151.9 curved-shaft edger

Kress Commercial trimmer

Kress KC151.9

Curved-shaft edger for comfort and precision in tight spaces.

1.2 kWoutput
25 ccgas equivalent
8 inblade
8100rpm top speed
  • Curved shaft
  • Easy height adjustment
  • Contoured magnesium guard
  • 2 pre-set speeds with variable speed trigger
  • Kress-built brushless motor, IPX5
Full specifications
Voltage60 V
Cutting speed6800/8100 rpm
Maximum cutting diameter8 in
Weight without battery10.3 lbs
Blade size8 in

Source: Kress KC151.9 page.

Worker clearing brush along a fence by a rail line with a Kress KC170.9 brush cutter

Kress Commercial trimmer

Kress KC170.9

Bike-handle brush cutter that runs a trimmer head or a knife blade.

1.5 kWoutput
45 ccgas equivalent
3speed settings
30 cmknife blade
  • Quick-load trimmer head
  • Multi-purpose trimmer guard
  • Adjustable magnesium tower set
  • Bike handle and double shoulder harness included
  • Kress-built brushless motor, IPX5
Full specifications
Voltage60 V
Line length9 m
Cutting speed4200 / 5100 / 5900 rpm
Cutting width16 17/32 in
Blade length11 13/16 in
Maximum cutting diameter16.5 in
Cutting diameter (Knife blade)30 cm
Cutting diameter (Trimmer head)42 cm

Source: Kress KC170.9 page.

Landscaper trimming a flowering hedge with a Kress KC200.9 hedge trimmer

Kress Commercial hedge trimmer

Kress KC200.9

25-inch double-sided hedge trimmer with laser-cut blades for overgrown bushes.

25 inblade
1.5 intooth spacing
9 lbswithout battery
  • 38 mm tooth spacing for pruning
  • Runs on onboard or CyberPack backpack battery
  • Multi-position rear handle
  • Kress-built brushless motor, IPX5
Full specifications
Voltage60 V
Cutting speed2800/3200 rpm
Tooth spacing1.5 in
Blade length24 51/64 in
Weight without battery9 lbs
Water protection index (IP code)IPX5
Motor typeBrushless

Source: Kress KC200.9 page.

Landscaper shaping a hedge with a Kress KC201.9 hedge trimmer

Kress Commercial hedge trimmer

Kress KC201.9

Lighter 25-inch hedge trimmer with VibraShield low-vibration design for detail work.

25 inblade
1.2 intooth spacing
8.3 lbswithout battery
  • Lightweight design
  • Low vibration
  • Multi-position rear handle
  • Kress-built brushless motor, IPX5
Full specifications
Voltage60 V
Cutting speed4400/5000 rpm
Tooth spacing1.2 in
Blade length25 in
Weight without battery8.3 lbs
Water protection index (IP code)IPX5
Motor typeBrushless

Source: Kress KC201.9 page.

Worker in a safety vest holding a Kress KC231.9 short-shaft hedge trimmer

Kress Commercial hedge trimmer

Kress KC231.9

Compact short-shaft hedge trimmer with a fixed head.

22 inblade
1.34 intooth spacing
9.2 lbswithout battery
  • Compact, lightweight design with ergonomic handle
  • Short shaft
  • 2 pre-set speed settings
  • Works with CyberPack backpack battery and belt
Full specifications
Voltage60 V
Tooth spacing1.34 in
Weight without battery9.2 lbs
Motor typeBrushless

Source: Kress KC231.9 page.

Landscaper holding a Kress KC240.9 pole hedge trimmer beside a hedge

Kress Commercial hedge trimmer

Kress KC240.9

Short-shaft pole hedge trimmer with a 145-degree articulating head.

1 kWoutput
22 inblade
31.5 inshaft
145°head articulation
  • 22 in dual-action laser-cut steel blade
  • 145° articulating cutting head
  • Rear impact guard
  • Ergonomic rubber sleeve
Full specifications
Voltage60 V
Cutting speed3200/4000 rpm
Tooth spacing1.3 in
Blade length22 in
Weight without battery11.4 lbs

Source: Kress KC240.9 page.

Landscaper trimming a tall hedge beside a building with a Kress KC241.9 pole hedge trimmer

Kress Commercial hedge trimmer

Kress KC241.9

Short-shaft pole hedge trimmer with a fixed-angle head.

1 kWoutput
22 inblade
34.3 inshaft
10.1 lbswithout battery
  • 22 in dual-action laser-cut steel blade
  • Fixed angle design
  • Rear impact guard
  • Ergonomic rubber sleeve
Full specifications
Voltage60 V
Cutting speed3200/4000 rpm
Tooth spacing1.3 in
Blade length22 in
Weight without battery10.1 lbs
Motor typeBrushless

Source: Kress KC241.9 page.

Overhead view of a worker trimming a long hedge with a Kress KC270.9 pole hedge trimmer

Kress Commercial hedge trimmer

Kress KC270.9

Long-shaft pole hedge trimmer with a 145-degree articulating head for tall hedges.

1 kWoutput
22 inblade
43.3 inshaft
145°head articulation
  • 22 in dual-action laser-cut steel blade
  • 43.3 inch shaft
  • 145° articulating cutting head
  • Rear impact guard
Full specifications
Voltage60 V
Cutting speed3200/4000 rpm
Tooth spacing1.3 in
Weight without battery11.9 lbs
Motor typeBrushless

Source: Kress KC270.9 page.

Worker clearing a stadium walkway with a Kress KC500.9 backpack blower

Kress Commercial tool

Kress KC500.9

Backpack blower with 35 N of force that the maker compares to a 65 cc 2-stroke.

35 Nblowing force
900 cfmair volume
190 mphair speed
15.2 lbsweight
  • QuietStorm low-noise technology
  • 4 speeds, adjustable throttle and cruise control
  • Adjustable, breathable backpack
  • Stainless steel protection tip
Full specifications
Noise (LpA)62.5 dB (@ 15 m)
Voltage60 V
Maximum air volume900 cfm
Maximum air speed190 mph
Weight15.2 lbs
Water protection index (IP code)IPX5
Motor typeBrushless

Source: Kress KC500.9 page.

Landscaper blowing leaves across a parking lot with a Kress KC501.9 backpack blower

Kress Commercial tool

Kress KC501.9

Backpack blower with 41 N of force that the maker calls the highest performance in its lineup, compared to an 80 cc gas blower.

41 Nblowing force
960 cfmair volume
230 mphair speed
15.2 lbswithout battery
  • Turbo button
  • QuietStorm technology
  • Heavy-duty padded backrest with chest strap
  • 4 speeds, adjustable throttle and cruise control
Full specifications
Voltage60 V
Sound power level, guaranteed (LWA)96.2
Sound pressure level at operators ear (LPA)85.2
Sound pressure (15m)63 dB(A)
Maximum air volume960 cfm
Maximum air speed230 mph
Weight without battery15.2 lbs

Source: Kress KC501.9 page.

Landscaper clearing leaves along a hedge with a Kress KC520.9 backpack blower

Kress Commercial tool

Kress KC520.9

Backpack blower with 30 N of force for routine and targeted clearing.

30 Nblowing force
800 cfmair volume
200 mphair speed
16 lbswithout battery
  • Turbo boost on demand
  • QuietStorm low-noise technology
  • Ergonomic padded backrest with chest strap
  • Stainless steel protection tip
Full specifications
Voltage60 V
Sound pressure (15m)64 dB(A)
Maximum air volume800 cfm
Maximum air speed200 mph
Weight without battery16 lbs
Motor typeBrushless

Source: Kress KC520.9 page.

Worker in orange gear carrying a Kress KC300.9 chainsaw past cut logs

Kress Commercial tool

Kress KC300.9

16-inch chainsaw with 2.8 kW of power and an Oregon chain.

2.8 kWoutput
16 inbar
79 ft/schain speed
8.2 lbsweight
  • Oregon 0.325 lp chain
  • Professional chain tensioning system
  • Inertia chain brake with rapid chain stop
  • Low vibration
  • Kress-built brushless motor, IPX5
Full specifications
Noise (LpA)88dB(@ear)
Oil tank volume6.4 oz
Voltage60 V
Chain typeOregon, 0.325lp
Bar length16 in
Chain speed79 ft/s
Weight8.2 lbs
Water protection index (IP code)IPX5
Motor typeBrushless

Source: Kress KC300.9 page.

Landscaper pushing a red Kress Commercial walk-behind mower across a lawn

Kress Commercial tool

Kress KC710.9

21-inch self-propelled walk-behind mower with a reinforced steel deck.

21 indeck
3 kWmax power
0-4 mphself-propelled
2.5 bubag
  • 3-in-1: mulching, bagging and rear-side discharge
  • SmartCut blade speed control
  • Auto-clutch and differential transmission
  • Two-point cut height adjustment, 1-4.5"
  • Reinforced 15ga steel deck with wear plates
Full specifications
Max. torque11 Nm
Cutting modeMulch/Bag/Rear side discharge
Cutting height1 in / 4.5 in
Voltage60 V
Self-propelled Speed (min-max)0 - 4 mph
Cutting deck materialReinforced 15ga Steel
Cutting speed2800/3300 rpm
Deck size21 in
Grass bag volume2.5 bushels
Weight77 lbs
Water protection index (IP code)IPX5
Motor typeBrushless

Source: Kress KC710.9 page.

Kress KAC804 CyberPack 240 Wh battery on the edge of a garden bed

Kress CyberSystem

Kress KAC804 CyberPack 240 Wh

Onboard 8-minute battery for Kress Commercial tools.

240 Whcapacity
8 mincharge
3,000cycle lifespan
6.6 lbsweight
  • 8-minute charge
  • Lifespan of 3,000 cycles
  • Integrated bluetooth
  • LED capacity indicator, IPX5
Full specifications
Battery capacity4 Ah
Battery voltage60 V
Weight6.6 lbs
Battery charging voltage100-240 V
Output voltage20 V

Source: Kress KAC804 page.

Kress KAC810 CyberPack 660 Wh backpack battery in a garden

Kress CyberSystem

Kress KAC810 CyberPack 660 Wh

Large-capacity 8-minute battery for the mower or as a backpack battery.

660 Whcapacity
8 mincharge
3,000cycle lifespan
17 lbsweight
  • 8-minute charge
  • Lifespan of 3,000 cycles
  • 6 years warranty
  • Integrated bluetooth, IPX5
Full specifications
Battery capacity11 Ah
Battery voltage60 V
Weight17 lbs

Source: Kress KAC810 page.

Kress KAC800 CyberPack Nano battery on a pickup tailgate

Kress CyberSystem

Kress KAC800 CyberPack Nano

Compact, lightweight 240 Wh battery.

240 Whcapacity
3.6 lbsweight
  • Compact and lightweight
  • Integrated bluetooth
  • LED battery capacity indicator
  • IPX5
Full specifications
Battery capacity4 Ah
Battery voltage60 V
Weight3.6 lbs

Source: Kress KAC800 page.

Kress KAC815 CyberCapsule battery on a pickup tailgate

Kress CyberSystem

Kress KAC815 CyberCapsule

1.5 kWh energy module that charges batteries away from an outlet or powers tools as a backpack battery.

1500 Whcapacity
17.8 lbsweight
  • Battery-to-battery power source
  • Works as a backpack battery
  • Integrated bluetooth
  • IPX5
Full specifications
Battery capacity25 Ah
Battery voltage60 V
Weight17.8 lbs

Source: Kress KAC815 page.

Kress KAC840 CyberPlug charger on a workshop bench

Kress CyberSystem

Kress KAC840 CyberPlug

Dual-port AC charger for the shop or trailer.

30 Acharging current
12 min240 Wh charge
25 min660 Wh charge
2ports
  • Dual-port design
  • Air cooling system
  • Charging status and diagnostic alerts
  • IPX5
Full specifications
Charging current30 A
Voltage110-240 V
Battery typeLi-Ion
Charging times240 Wh: 12 min / 660 Wh: 25 min
Weight26 lbs
Output voltage60 V

Source: Kress KAC840 page.

Kress KAC844 CyberLite charger on leaf-covered ground

Kress CyberSystem

Kress KAC844 CyberLite

Portable DC charger that moves energy from a CyberCapsule to a CyberPack.

30 Acharging current
12 min240 Wh charge
2battery ports
  • DC charging from CyberCapsule
  • Portable design
  • Air cooling system
  • Charging status and diagnostic alerts
Full specifications
Battery Ports2
Charging current30 A
Charging timesCyberPack 240 Wh: 12 min
Weight26 lbs
Output voltage60 V

Source: Kress KAC844 page.

Kress KAC875L CyberTank power station in a pickup bed

Kress CyberSystem

Kress KAC875L CyberTank 5 kWh

Portable power station that stores energy and recharges CyberPacks in up to 8 minutes on the job.

5 kWhstorage
8 minCyberPack charge
3DC-DC ports
308 lbsweight
  • 2000 charge cycles
  • 4G and GPS connectivity
  • Rugged metal housing
  • Optional CyberCabinet
Full specifications
Charging timeUp to 4 hr
Battery capacity105 Ah
Voltage48 V
Charging timesCyberNano: 14 min / CyberPack: 8 min
Weight308 lbs

Source: Kress KAC875L page.

Kress KAC877L CyberTank power station in a pickup bed

Kress CyberSystem

Kress KAC877L CyberTank 7.2 kWh

7.2 kWh CyberTank power station that stores energy for all-day work, the maker says.

7.2 kWhstorage
8 minflash charge
3DC-DC ports
364 lbsweight
  • 2000 charge cycles
  • 4G and GPS connectivity
  • Universal compatibility
  • Optional CyberCabinet
Full specifications
Charging timeUp to 6 hr
Battery capacity150 Ah
Voltage48 V
Charging timesCyberPack: 14 min / CyberPack (flash charge): 8 min
Weight364 lbs

Source: Kress KAC877L page.

Kress RTKn robotic mower cutting a resort lawn beside a pool

Kress RTKn robotic mower

Kress KR233

RTKn robotic mower recommended for 3 acres, with obstacle avoidance.

3 acrecommended
4.5 acmaximum
40%max slope
1.18-3.54 incut height
  • Satellite-guided, no perimeter wire
  • No station antenna on your property
  • Obstacle Avoidance System (OAS)
  • Mows in systematic parallel lines
  • Multi-zone navigation, 4G and app control
Full specifications
Cutting height1.18 - 3.54 in
Battery capacity10 Ah
Battery voltage20 V
Battery typeLi-Ion
Maximum area (cutting every 72h)4.5 acre
Recommended area (cutting every 48h)3 acre
Cutting height adjustmentElectronic
Cutting blades12
Cutting width13 25/32 in
DisplayLCD
Weight46.34 lbs
Maximum slope40%
Sound level perceived62 db
Water protection index (IP code)IPX5

Source: Kress KR233 page.

Kress RTKn robotic mower cutting a resort lawn beside a pool

Kress RTKn robotic mower

Kress KR236

RTKn robotic mower recommended for 6 acres and up to 9 acres.

6 acrecommended
9 acmaximum
40%max slope
1.18-3.54 incut height
  • Satellite-guided, no perimeter wire
  • No station antenna on your property
  • Obstacle Avoidance System (OAS)
  • Mows in systematic parallel lines
  • Multi-zone navigation, 4G and app control
Full specifications
Cutting height1.18 - 3.54 in
Battery capacity10 Ah
Charging current20 A
Battery voltage20 V
Voltage20 V
Maximum area (cutting every 72h)9 acre
Recommended area (cutting every 48h)6 acre
Cutting height adjustmentElectronic
Cutting blades12
Cutting width13.78 in
DisplayLCD
Maximum slope40%
Water protection index (IP code)IPX5

Source: Kress KR236 page.

Kress KR236S RTKn robotic lawn mower with V-Wheels, side view

Kress RTKn robotic mower

Kress KR236S

KR236 with an improved cutting and drive motor and V-Wheels for better grip.

6 acrecommended
9 acmaximum
40%max slope
50.27 lbsweight
  • Enhanced cutting and driving motors
  • V-Wheel for ground grip
  • Satellite-guided, no perimeter wire
  • No station antenna on your property
  • Obstacle Avoidance System (OAS)
Full specifications
Cutting height1.18 - 3.54 in
Battery capacity10 Ah
Charging current20 A
Battery voltage20 V
Voltage20 V
Maximum area (cutting every 72h)9 acre
Recommended area (cutting every 48h)6 acre
Cutting height adjustmentElectronic
Cutting blades6
Cutting width13.78 in
DisplayLCD
Weight50.27 lbs
Maximum slope40%
Water protection index (IP code)IPX5

Source: Kress KR236S page.

Kress KR237 RTKn 7-acre robotic lawn mower with gliding disc, side view

Kress RTKn robotic mower

Kress KR237

Gliding-disc RTKn mower that cuts as low as 10 mm, built for fairways.

7 acrecommended
10.5 acmaximum
0.39-2.36 incut height
20 Ahbattery
  • High-power cutting motor with gliding disc
  • Cuts as low as 10 mm
  • Satellite-guided, no perimeter wire
  • No station antenna on your property
  • Obstacle Avoidance System (OAS)
Full specifications
Cutting motor output110 W
Cutting height0.39 - 2.36 in
Battery capacity20 Ah
Charging current20 A
Battery voltage20 V
Voltage20 V
Maximum area (cutting every 72h)10.5 acre
Recommended area (cutting every 48h)7 acre
Cutting height adjustmentElectronic
Cutting blades6
Cutting width13.78 in
DisplayLCD
Weight49.38 lbs
Maximum slope40%
Sound level perceived75 db
Water protection index (IP code)IPX5

Source: Kress KR237 page.

60 V commercial string trimmers, edgers and brush cutter at a glance

ModelKC100.9KC110.9KC120.9KC150.9KC151.9KC170.9
Cutting speed4200/5100/5900 rpm4500/5500 rpm4500/5900 rpm3000/3600/4200 rpm6800/8100 rpm4200 / 5100 / 5900 rpm
Cutting width16 17/32 in16.5 in16.5 in––16 17/32 in
Line diameter0.095 / 0.105 in0.095/0.105 in0.095/0.105 in–––
Blade size–––8 in8 in–
Weight without battery––9.4 lbs11.6 lbs10.3 lbs–

60 V commercial hedge trimmers at a glance

ModelKC200.9KC201.9KC231.9KC240.9KC241.9KC270.9
Cutting speed2800/3200 rpm4400/5000 rpm–3200/4000 rpm3200/4000 rpm3200/4000 rpm
Tooth spacing1.5 in1.2 in1.34 in1.3 in1.3 in1.3 in
Blade length24 51/64 in25 in–22 in22 in–
Weight without battery9 lbs8.3 lbs9.2 lbs11.4 lbs10.1 lbs11.9 lbs

60 V commercial blowers, chainsaw and mower at a glance

ModelKC500.9KC501.9KC520.9
Maximum air volume900 cfm960 cfm800 cfm
Maximum air speed190 mph230 mph200 mph
Weight without battery–15.2 lbs16 lbs

CyberSystem batteries and chargers at a glance

ModelKAC804 CyberPack 240 WhKAC810 CyberPack 660 WhKAC800 CyberPack NanoKAC815 CyberCapsuleKAC840 CyberPlugKAC844 CyberLiteKAC875L CyberTank 5 kWhKAC877L CyberTank 7.2 kWh
Battery capacity4 Ah11 Ah4 Ah25 Ah––105 Ah150 Ah
Battery voltage60 V60 V60 V60 V––––
Charging current––––30 A30 A––
Charging times––––240 Wh: 12 min / 660 Wh: 25 minCyberPack 240 Wh: 12 minCyberNano: 14 min / CyberPack: 8 minCyberPack: 14 min / CyberPack (flash charge): 8 min
Weight6.6 lbs17 lbs3.6 lbs17.8 lbs26 lbs26 lbs308 lbs364 lbs

RTKn robotic mowers for large properties at a glance

ModelKR233KR236KR236SKR237
Recommended area (cutting every 48h)3 acre6 acre6 acre7 acre
Maximum area (cutting every 72h)4.5 acre9 acre9 acre10.5 acre
Cutting height1.18 - 3.54 in1.18 - 3.54 in1.18 - 3.54 in0.39 - 2.36 in
Cutting width13 25/32 in13.78 in13.78 in13.78 in
Battery capacity10 Ah10 Ah10 Ah20 Ah
Weight46.34 lbs–50.27 lbs49.38 lbs
Maximum slope40%40%40%40%

Kress parts and accessories

Kress posts an owner's manual on each product page and lists accessories by part number, such as KAC100 trimmer heads and KA0002 long life robot blades. Bring the model number from your tool, battery or mower (KC, KAC or KR) to the Clinton Tractor parts counter and ask for Kress parts and accessories.

  • Trimmer heads
  • Trimmer line
  • Edger blades
  • Shoulder straps
  • 10-inch chainsaw bars and chains
  • Backpack harness and battery belt
  • Robot mower blades
  • Wheel brush kits
  • V-wheels
  • Charging stations
  • Robot garages
  • Rain covers
Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

What the Kress CyberSystem and RTKn bring

60 V Commercial tool warranty

Kress's warranty statement lists 5 years for home use and 3 years or 750 hours for commercial use on KC tools.

Commercial tool warranty terms

60V Commercial Tool (Models start with KC): 5 years residential / home use; 3 years or 750 hours of use (whichever comes first) professional / commercial use.

60 V Commercial Mower: 5 years residential; 2 years or 500 hours of use (whichever comes first) commercial.

Following parts of 60V Commercial Equipment have limited warranty period for 1 year: Gear Box, Aluminum Tube, Planetary Gear, Pump and Auxiliary Handle.

On the mower, the wheel assemblies, drive motor and lower push handle also carry 1 year.

Applicable to products purchased after January 1, 2024.

CyberPack battery warranty

Kress's warranty statement lists 6 years or 3,000 charging cycles, whichever comes first, for commercial CyberPack batteries.

Battery and charger warranty terms

CyberPack Commercial Batteries (KAC804, KAC805, KAC810, KAC811): 6 years or 3000 charging cycles (whichever comes first).

CyberTank Portable Power Station (KAC875L, KAC877L): 6 years or 2000 charging cycles.

CyberCapsule (KAC815) and CyberPack Nano (KAC800): 4 years or 1200 charging cycles. Commercial chargers: 4 years.

Robotic mower warranty

Kress's warranty statement lists Mission Mega RTKn mowers at 3 years for home use and 2 years for commercial use.

Robotic mower warranty terms

Mission Mega RTKn: 3 years residential / home use, 2 year professional / commercial use.

Mission Mega RTKn battery and charger: 1 year.

Spare parts: 6 months.

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday
Get directions(315) 853-6151

Driving distance

  • New Hartford 6 mi
  • Utica 9 mi
  • Rome 14 mi
  • Oneida 17 mi
  • Hamilton 20 mi
  • Herkimer 26 mi
  • Cazenovia 31 mi
  • Norwich 42 mi
  • Cooperstown 47 mi
  • Syracuse 49 mi
  • Oneonta 60 mi
  • Cortland 61 mi

Before you visit

Can I see Kress battery tools and mowers in person?

Call (315) 853-6151 before you drive over and ask which Kress battery tools and mowers we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.