Tubeline Bale Wrapper and Spreader Dealer in Central New York

Name: Clinton Tractor & Implement Co.
Address: 31 Meadow St, Clinton, NY, 13323, US
Telephone: (315) 853-6151

Clinton Tractor in Clinton, NY is a Tubeline dealer. Tubeline builds in Elmira, Ontario. The line covers inline and individual bale wrappers, Nitro vertical manure spreaders, Bale BOSS and Bale Gator processors, BaleFeeders and bale handling tools.

Call (315) 853-6151 Compare models

31 Meadow St, Clinton, NY 13323
Mon–Fri 7–5, Sat 7–12
(315) 853-6151

Inline bale wrappers

Tubeline built its name on inline balewrappers that wrap bales end to end in one continuous tube. Models come with electric-over-hydraulic controls (LSV, or AX2 on the TLR5000) or an electronic control valve (ECV), each with its own Honda engine and hydraulics.

Tubeline TL506' max. round bale · 6,300 lbs. · 13 HP Honda engine
Tubeline TL606' max. round bale · 4' x 4' x 6' max. square bale · 7,600 lbs.
Tubeline TL706' max. round bale · 9,600 lbs. · 20 HP Honda engine
Tubeline TLR50006' max. round bale · 5,100 lbs. · 13 HP Honda engine

Individual bale wrappers

Individual wrappers seal one bale at a time, from 3-point hitch units that run on tractor hydraulics to self-loading trailed wrappers that follow the baler. All use 30" film with twin wrap.

Tubeline TL1000R30 HP required · 1,600 lbs. · 4" offset twin wrap lead
Tubeline TL1100R5' x 6' max. round bale · 5 GPM min. hydraulic flow · 1,936 lbs. with optional power pack
Tubeline TL1700SR3' x 3' square bales, 4' to 7' · 5' x 6' max. round bale · 2,865 lbs.
Tubeline TL36060 tractor HP · 16 GPM hydraulic flow · 5,100 lbs.
Tubeline TL6453,500 lbs. max. bale · 60 HP required · 10 GPM min. flow

Nitro vertical spreaders

Nitro spreaders feed the load to vertical beaters on an apron chain, with a guillotine endgate to meter pen pack or semi-solids. Pick the low-profile LS series for small herds, the Rancher Series (RS), or the commercial line up to 30 tons.

Nitro 300LS6 ton capacity · 300 cu. ft. heaped · 32" vertical beaters
Nitro 340LS8 ton capacity · 344 cu. ft. heaped · 32" vertical beaters
Nitro 440LS10 ton capacity · 440 cu. ft. heaped · 32" vertical beaters
Nitro 275RS10 ton capacity · 294 cu. ft. heaped · 34" vertical beaters
Nitro 375RS13 ton capacity · 444 cu. ft. heaped · 34" vertical beaters
Nitro 575RS16 ton capacity · 576 cu. ft. heaped · 34" vertical beaters
Nitro 725RS19 ton capacity · 767 cu. ft. heaped · 36" vertical beaters
Nitro 45013 ton capacity · 481 cu. ft. heaped · 34" vertical beaters
Nitro 60017 ton capacity · 636 cu. ft. heaped · 34" vertical beaters
Nitro 75020 ton capacity · 838 cu. ft. heaped · 36" vertical beaters
Nitro 85020 ton capacity · 855 cu. ft. heaped · 36" vertical beaters
Nitro 85525 ton capacity · 855 cu. ft. heaped · 36" vertical beaters
Nitro 95025 ton capacity · 1,028 cu. ft. heaped · 36" vertical beaters
Nitro 950TRI25 ton capacity · 1,028 cu. ft. heaped · 36" vertical beaters
Nitro 105030 ton capacity · 1,159 cu. ft. heaped · 36" vertical beaters

Bale processors and feeders

Bale BOSS processors shred large square and round bales for bedding or feeding, either loader mounted or trailed. Bale Gator units blow bedding into stalls and pens, and BaleFeeders unroll round bales.

Tubeline Bale BOSS 11 square bale · 18-40 GPM hydraulic flow · 1,590 lbs. (3720HF)
Tubeline Bale BOSS 22 bale capacity · 38 flails · 80-180 HP (BOSS 2)
Tubeline Bale BOSS 44 bales (4x4x9) · 11,000 lbs. shipping · 120-250 HP
Tubeline Bale BOSS R4' max. bale width · 6' max. bale diameter · 1,900 lbs.
Tubeline Bale Gator 334800 lbs. · 40 ft. max. throw · 18-50 HP carrier
Tubeline Bale Gator 3461,450 lbs. · 50 ft. max. throw · 45-65 HP carrier
Tubeline Bale Gator 34896" bale length · 1,850 lbs. · 70-90 HP carrier
Tubeline BaleFeeder BF8000S6' max. round bale · 2,500 lbs. max. bale · 12 GPM
Tubeline BaleFeeder BF8000SL2 bale capacity · 2,500 lbs. max. bale · 12 GPM

Hay conditioning and bale handling

Tubeline also builds tools to condition hay and move bales: the Accelerator crimper, Accumul8 and Retriever for small square bales, and the Technobale wagon for large round bales.

Tubeline Accelerator 7500T / 9500T7' / 9' roll width · 15 mph max. · 540 RPM PTO
Tubeline Accumul8 and Grabber8 / 10 / 12 bales per pack · 640 lbs. Grabber (AC800G) · 8' wide 10-bale pack
Tubeline Accumul8 Retriever10 bales per pack · 24 grapple hooks · 905 lbs.
Tubeline Technobale 9808-10 round bales on the bed · 120 HP min. · 2 auxiliary outlets

About Tubeline Manufacturing

Tubeline Manufacturing sold its first inline balewrapper in 1995. The maker says its balewrappers now ship to 6 continents and are still the flagship of its hay equipment. Many hay handling and processing machines have been added over the years, including the Nitro spreaders.

Tubeline is based in Elmira, Ontario, with its main office on Reid Woods Drive and a second plant on Floradale Road. Its stated mission is to provide innovative equipment and value to the customer, founded on Christian principles. Tubeline also sells Pitbull dozer blades for silage, dirt and snow.

Compare Tubeline bale wrappers, processors and spreaders

Search all 37 Tubeline wrappers, spreaders, processors and hay tools by line, name or feature. Every spec comes from the model's page on tubeline.ca.

Showing all 37 models

Tubeline inline wrapper

Tubeline TL50

Inline wrapper for round bales up to 6 ft

6'max. round bale

6,300lbs.

13HP Honda engine

3year warranty

Film Snap cuts the wrap without stopping the cycle
Knurled pre-tensioners give about 55% film stretch
Fully automatic cycling
Hydraulic steering and drive wheel

Full specifications

Models	TL50 LSV / TL50 ECV
Overall length	18'
Width	9' 5"
Height	9' 10"
Weight	6,300 lbs.
Power	13 HP Honda c/w 11 GPM Pump
Electric start	Standard
Alternator	18 Amp.
Hydraulics	Self-contained
Controls	Electric over Hydraulic (LSV) / Electronic Control Valve (ECV)
Tires	(2) 11L x 15 8 Ply and (2) 27 x 10.5 Traction
Quick start leveling	Quick Deck Adjust
Compaction	Deck Tight Pack
Steering	Hydraulic
Emergency stop	E Stop Button
Roll-off tail	Fixed
Transport lights	Standard
Round bales	Up to 6'
Square bales	N/A
Film stretcher	(2) 30" x 55%
Bale saddles	-
Bale guide rollers	Standard (x2)
Hoop speed	Adj. Flow Control Valve

Source: Tubeline TL50 page.

Tubeline inline wrapper

Tubeline TL60

Inline wrapper for round and square bales

6'max. round bale

4' x 4' x 6'max. square bale

7,600lbs.

13HP Honda engine

Adjustable bale saddles for square bales
Four standard bale guide rollers
Film Snap cuts the wrap without stopping the cycle
Fully automatic cycling

Full specifications

Models	TL60 LSV / TL60 ECV
Overall length	20'
Width	9' 5"
Height	9' 10"
Weight	7,600 lbs.
Power	13 HP Honda c/w 11 GPM Pump
Electric start	Standard
Alternator	18 Amp.
Hydraulics	Self-contained
Controls	Electric over Hydraulic (LSV) / Electronic Control Valve (ECV)
Tires	(2) 11L x 15 8 Ply and (2) 27 x 10.5 Traction
Quick start leveling	Quick Deck Adjust
Compaction	Deck Tight Pack
Steering	Hydraulic
Emergency stop	E Stop Button
Roll-off tail	Fixed
Transport lights	Standard
Round bales	Up to 6'
Square bales	Up to 3' x 3' x 6' & 4' x 4' x 6'
Film stretcher	(2) 30" x 55%
Bale saddles	Adjustable
Bale guide rollers	Standard (x4)
Hoop speed	Adj. Flow Control Valve

Source: Tubeline TL60 page.

Tubeline inline wrapper

Tubeline TL70

The largest inline model, with offset twin wrap standard

6'max. round bale

9,600lbs.

20HP Honda engine

412.5 x 15 highway tires

Larger hoop for 6' round bales
Wraps double-stacked 3' x 4' square bales
Hydraulic lift roll-off tail
Cam brakes and retractable auto-lock tongue

Full specifications

Models	TL70 LSV / TL70 ECV
Overall length	25' 6"
Width	10' 8"
Height	10' 7"
Weight	9,600 lbs.
Power	20 HP Honda c/w 16 GPM Pump w/ Hyd. Cooler
Electric start	Standard
Alternator	18 Amp.
Hydraulics	Self-contained
Controls	Electric over Hydraulic (LSV) / Electronic Control Valve (ECV)
Tires	(4) 12.5 x 15 Highway Service
Quick start leveling	Quick Deck Adjust
Compaction	Adj. Cam Action/Deck Tight Pack
Steering	Hydraulic
Emergency stop	E Stop Button
Offset twin wrap	Standard
Roll-off tail	Hydraulic Lift
Transport lights	Standard
Round bales	Up to 6'
Square bales	Up to 4' x 4' x 6' / Up to 3' x 3' x 7'
Square bales (double stacked)	3' x 4' x 5.5'
Film stretcher	(2) 30" x 55%
Bale saddles	Adjustable
Bale guide rollers	Optional
Hoop speed	Adj. Flow Control Valve

Source: Tubeline TL70 page.

Tubeline inline wrapper

Tubeline TLR5000

Lighter, more maneuverable inline wrapper on a wagon chassis

6'max. round bale

5,100lbs.

13HP Honda engine

30"film stretchers (2)

Large hoop takes bales up to 6'
Hydraulic over-centre cam axle packs bales tightly
Easy-towing wagon chassis
Offered as AX2 or ECV

Full specifications

Models	TLR5000 AX2 / TLR5000 ECV
Overall length	18'
Width	9'
Height	9'
Weight	5,100 lbs.
Power	13 HP Honda c/w 11 GPM Pump
Electric start	Standard
Alternator	18 Amp.
Hydraulics	Self-contained
Controls	Electric over Hydraulic (AX2) / Electronic Control Valve (ECV)
Tires	(2) 11L x 15 8 Ply and (2) 27 x 10.5 Traction
Quick start leveling	Quick Deck Adjust
Compaction	Deck Tight Pack
Steering	Hydraulic
Emergency stop	E Stop Button
Roll-off tail	Fixed
Transport lights	Standard
Round bales	Up to 6'
Square bales	N/A
Film stretcher	(2) 30" x 55%
Bale saddles	Fixed
Bale guide rollers	Standard
Hoop speed	Adj. Flow Control Valve

Source: Tubeline TLR5000 page.

Tubeline individual wrapper

Tubeline TL1000R

3-point hitch wrapper that runs on tractor hydraulics

30HP required

1,600lbs.

4"offset twin wrap lead

Cat. II3-point hitch

Wrap counter sets rotations per bale
Offset twin wrap kit
Wrap cutter cuts film after the bale is dumped
Adjustable bale guides for 4' or 5' bales

Full specifications

Bale size	4' x 4' & 5' x 5'6"
Film width	30" (x2)
Length	104"
Width	80"
Height	84"
Weight	1,600 lbs.
HP required	30 HP
Three point hitch	Category II
Drive type	Hydraulic
Bale guides	Adjustable (4' or 5')

Source: Tubeline TL1000R page.

Tubeline individual wrapper

Tubeline TL1100R

Automatic round bale wrapper with a wireless remote

5' x 6'max. round bale

5GPM min. hydraulic flow

1,936lbs. with optional power pack

4"offset twin wrap lead

Wireless remote runs every function
Fully automatic with LCD display
Hydraulic bale dump
Optional power pack (TL1100R-AP) for stand-alone use

Full specifications

Bale size (round)	Up to 5' x 6'
Film width	30" (x2)
Min. hydraulic flow	5 GPM @ 2500 PSI
Hitch	3PH (Category II)
Drive type	Hydraulic
Bale guides	Adjustable (4' or 5')
Offset twin wrap	Fixed 4"
Length	118"
Width	79"
Height	88"
Weight (lbs.)	1,936* (includes optional power pack)
Power pack	Optional

Source: Tubeline TL1100R page.

Tubeline individual wrapper

Tubeline TL1700SR

Trailed wrapper for square and round bales

3' x 3'square bales, 4' to 7'

5' x 6'max. round bale

2,865lbs.

30HP required

Switches between round and square bale drive ratios
Integrated bale mat protects wrapped bales
Offset twin wrap kit
Five versions, with power pack or auto cycling

Full specifications

Models	TL1700SR / TL1700SR-MFC / TL1700SR-P / TL1700SR-A / TL1700SR-PA
Bale size (square)	3' x 3' bales between 4' to 7'
Bale size (round)	4' x 4' to 5' x 6'
Film width	30" (x2)
Length	192"
Width	82"
Height	95"
Weight	2,865 lbs.
HP required	30 / 30 / - / 30 / -
Hitch	Trailer (Clevis)
Drive type	Hydraulic
Guide rollers	2
Manual flow control	- / Yes / - / - / -
Power pack	- / - / Yes / - / Yes
Auto cycling	- / - / - / Yes / Yes
Hydraulic cooler	- / - / - / - / Yes

Source: Tubeline TL1700SR page.

Tubeline individual wrapper

Tubeline TL360

Self-loading round bale wrapper that wraps on the go

60tractor HP

16GPM hydraulic flow

5,100lbs.

2bales carried

Loading arm carries a second bale while one is wrapped
Automatic cut and hold
In-cab full function control
Optional bale tipper lays bales on their sides

Full specifications

Unit type	Trailed, Self-Loading
Height	133"
Width	119"
Length	164"
Weight	5,100 lbs.
Bale size (round)	4' x 5.5' diameter / 5' x 4.5 diameter
HP required	60HP
Min. hydraulic flow	16 GPM
Hitch	Clevis

Source: Tubeline TL360 page.

Tubeline individual wrapper

Tubeline TL645

Self-loading wrapper with colour LCD control

3,500lbs. max. bale

60HP required

10GPM min. flow

6spare film rolls carried

Hydraulic side or end tip
Automatic cut and hold
Standard twin wrap
Film break sensor and toolless bale size adjustment

Full specifications

Unit type	Trailed, Self-Loading
Bale size (round)	Up to 5' x 6'
Max. bale weight	3,500 lbs
Min. hydraulic flow	10 GPM
Hitch	Clevis
Length	241"
Width	100"
Height	113"
Weight (lbs.)	5,214*
HP required	60 HP
Electrical requirements	12V DC (for In-Cab control monitor)

Source: Tubeline TL645 page.

Nitro spreader

Nitro 300LS

Low-profile 6-ton spreader for 540 RPM tractors

6ton capacity

300cu. ft. heaped

32"vertical beaters

50HP required

Guillotine-style endgate
Reversible live apron floor
Quick-drop vertical beaters
Lower loading height for small herds

Full specifications

Carrying capacity	6 Ton (5,443 kg)
Heaped capacity	300 cu. ft.
Struck capacity	171 cu. ft.
Tractor HP required	50 HP
Inside dimensions	62"W x 27"D x 160"L
Overall length	23'5" (281")
Overall width (single axle)	110"
Loading height (single axle)	60"
Wheel hub capacity (single axle)	12,000 lbs (bolt) x2
Single tire sizes	19L-16.1 Implement / 425/22.5 Truck / 550/45-22.5 Flotation / 11R-22.5 New or Used Truck
Beater diameter	32"
Beater speed	540 RPM
PTO speed	540 RPM
Apron chain link dia.	5/8"
Shipping weight	6,250 lbs.
Brakes available	No

Source: Tubeline Nitro 300LS page.

Nitro spreader

Nitro 340LS

Low-profile 8-ton tandem spreader

8ton capacity

344cu. ft. heaped

32"vertical beaters

60HP required

Guillotine-style endgate
Reversible live apron floor
Quick-drop vertical beaters
Lower loading height for small herds

Full specifications

Carrying capacity	8 Ton (7,257 kg)
Heaped capacity	344 cu. ft.
Struck capacity	187 cu. ft.
Tractor HP required	60 HP
Inside dimensions	62"W x 27"D x 174"L
Overall length	24.5' (297")
Overall width (tandem axle)	107"
Loading height (tandem axle)	62.75"
Wheel hub capacity (tandem axle)	8,000 lbs (8 bolt) x4
Tandem tire sizes	16.5-16.1 Implement / 425/22.5 Truck / 550/45-22.5 Flotation / 11R-22.5 New or Used Truck
Beater diameter	32"
Beater speed	540 RPM
PTO speed	540 RPM
Apron chain link dia.	5/8"
Shipping weight	7,128 lbs.
Brakes available	No

Source: Tubeline Nitro 340LS page.

Nitro spreader

Nitro 440LS

Largest low-profile LS spreader

10ton capacity

440cu. ft. heaped

32"vertical beaters

100HP required

Guillotine-style endgate
Reversible live apron floor
Quick-drop vertical beaters
Lower loading height for small herds

Full specifications

Carrying capacity	10 Ton (9,072 kg)
Heaped capacity	440 cu. ft.
Struck capacity	256 cu. ft.
Tractor HP required	100 HP
Inside dimensions	62"W x 31"D x 206.5"L
Overall length	27.5' (330")
Overall width (tandem axle)	107"
Loading height (tandem axle)	67"
Wheel hub capacity (tandem axle)	8,000 lbs (8 bolt) x4
Tandem tire sizes	16.5-16.1 Implement / 425/22.5 Truck / 550/45-22.5 Flotation / 11R-22.5 New or Used Truck
Beater diameter	32"
Beater speed	540 RPM
PTO speed	540 RPM
Apron chain link dia.	5/8"
Shipping weight	8,050 lbs.
Brakes available	No

Source: Tubeline Nitro 440LS page.

Nitro spreader

Nitro 275RS

Rancher Series, 10-ton box

10ton capacity

294cu. ft. heaped

34"vertical beaters

80HP required

Removable beaters let it work as a live-floor trailer
Hydraulic-driven apron chain
Optional factory scale-ready axle
Guillotine endgate meters the load

Full specifications

Carrying capacity	10 Ton (9,072 kg)
Heaped capacity	294 cu. ft.
Struck capacity	201 cu. ft.
Tractor HP required	80 HP
Inside dimensions	62.5"W x 34.5"D x 143"L
Overall length	23'5" (281")
Overall width (single axle)	118"
Overall width (tandem axle)	115.5"
Loading height (single axle)	69"
Loading height (tandem axle)	69"
Wheel hub capacity (tandem axle)	12,000 lbs. (8-bolt) x4
Tandem tire sizes	425/22.5 Recap Truck or 550/45-22.5 Flotation
Wheel hub capacity (single axle)	16,000lbs (10-bolt) x2
Single tire sizes	425/22.5 Recap Truck or 550/45-22.5 / Flotation or 480/70-30 Tractor Lug Tire
Beater diameter	34"
Beater speed	420 RPM
PTO speed	1000 RPM
Apron chain link dia.	5/8"
Shipping weight	8,800 lbs.
Brakes available	Yes

Source: Tubeline Nitro 275RS page.

Nitro spreader

Nitro 375RS

Rancher Series, 13-ton box

13ton capacity

444cu. ft. heaped

34"vertical beaters

90HP required

Removable beaters let it work as a live-floor trailer
Hydraulic-driven apron chain
Optional factory scale-ready axle
Guillotine endgate meters the load

Full specifications

Carrying capacity	13 Ton (11,793 kg)
Heaped capacity	444 cu. ft.
Struck capacity	266 cu. ft.
Tractor HP required	90 HP
Inside dimensions	62.5"W x 34.5"D x 175"L
Overall length	25' (300")
Overall width (single axle)	126"
Overall width (tandem axle)	115"
Loading height (single axle)	76"
Loading height (tandem axle)	75"
Wheel hub capacity (tandem axle)	12,000 lbs. (8-bolt) x4
Tandem tire sizes	425/22.5 Recap Truck / 550/45-22.5 Flotation
Wheel hub capacity (single axle)	16,000lbs (10 bolt) x2
Single tire sizes	600/65-34
Beater diameter	34"
Beater speed	420 RPM
PTO speed	1000 RPM
Apron chain link dia.	5/8"
Shipping weight	9,139 lbs.
Brakes available	Yes

Source: Tubeline Nitro 375RS page.

Nitro spreader

Nitro 575RS

Rancher Series, 16-ton box

16ton capacity

576cu. ft. heaped

34"vertical beaters

125HP required

Removable beaters let it work as a live-floor trailer
Hydraulic-driven apron chain
Optional factory scale-ready axle
Guillotine endgate meters the load

Full specifications

Carrying capacity	16 Ton (14,515 kg)
Heaped capacity	576 cu. ft.
Struck capacity	379 cu. ft.
Tractor HP required	125 HP
Inside dimensions	62.5"W x 45.5"D x 218"L
Overall length	27.5’ (330")
Overall width (single axle)	131"
Overall width (tandem axle)	116"
Loading height (single axle)	88.5"
Loading height (tandem axle)	80"
Wheel hub capacity (tandem axle)	12,000 lbs. (8-bolt) x4 / 16,000 lbs. (10-bolt) x4
Tandem tire sizes	425/22.5 Recap Truck / 550/45-22.5 Flotation / 700/50-26.5 Flotation
Wheel hub capacity (single axle)	20,000lbs (10-bolt) x4
Single tire sizes	710/70 R38 Tractor Lug
Beater diameter	34"
Beater speed	420 RPM
PTO speed	1000RPM
Apron chain link dia.	5/8"
Shipping weight	11,000 lbs. / 4,990 kg
Brakes available	Yes

Source: Tubeline Nitro 575RS page.

Nitro spreader

Nitro 725RS

Largest Rancher Series, silage extension ready

19ton capacity

767cu. ft. heaped

36"vertical beaters

165HP required

Removable beaters let it work as a live-floor trailer
Hydraulic-driven apron chain
Optional factory scale-ready axle
Guillotine endgate meters the load

Full specifications

Carrying capacity	19 Ton (17,237 kg)
Heaped capacity	767 cu. ft.
Struck capacity	507 cu. ft.
Tractor HP required	165 HP
Inside dimensions	71"W x 50"D x 240"L
Overall length	30.3' (363")
Overall width (single axle)	136"
Overall width (tandem axle)	136"
Loading height (single axle)	93"
Loading height (tandem axle)	93"
Wheel hub capacity (tandem axle)	16,000 lbs. (10-bolt) x4
Tandem tire sizes	700/50-26.5 Flotation Tires
Wheel hub capacity (single axle)	20,000 (10 bolt) x2
Single tire sizes	710/70 R42 Tractor
Beater diameter	36"
Beater speed	420 RPM
PTO speed	1000RPM
Apron chain link dia.	5/8"
Shipping weight	15,652 lbs. / 7,099 kg
Brakes available	Yes

Source: Tubeline Nitro 725RS page.

Nitro spreader

Nitro 450

Commercial Nitro, 13-ton box

13ton capacity

481cu. ft. heaped

34"vertical beaters

125HP required

Slip slide poly board floor and walls
Guillotine endgate and reversible apron chain
Quick-drop beaters, scale ready
CV shaft for tight turns

Full specifications

Carrying capacity	13 Ton (11,793 kg)
Heaped capacity	481 cu. ft.
Struck capacity	290 cu. ft.
Tractor HP required	125 HP
Inside dimensions	62"W x 40"D x 201"L
Overall length	27' (324")
Overall width (single axle)	115"
Overall width (tandem axle)	116"
Loading height (single axle)	77"
Loading height (tandem axle)	79" (550/45-22.5) / 77" (425/22.5 recap)
Wheel hub capacity (tandem axle)	12,000 lbs. (8 bolt) x4
Tandem tire sizes	550/45-22.5 or 425/22.5 recap truck
Wheel hub capacity (single axle)	16,000lbs (10 bolt) x2
Single tire sizes	600/65-34
Beater diameter	34"
Beater speed	420 RPM
PTO speed	1000 RPM
Apron chain link dia.	5/8"
Shipping weight	11,355 lbs.
Brakes available	Yes

Source: Tubeline Nitro 450 page.

Nitro spreader

Nitro 600

Commercial Nitro, 17-ton box

17ton capacity

636cu. ft. heaped

34"vertical beaters

150HP required

Slip slide poly board floor and walls
Guillotine endgate and reversible apron chain
Quick-drop beaters, scale ready
CV shaft for tight turns

Full specifications

Carrying capacity	17 Ton (15,422 kg)
Heaped capacity	636 cu. ft.
Struck capacity	406 cu. ft.
Tractor HP required	150 HP
Inside dimensions	62"W x 50"D x 227"L
Overall length	29.5' (354")
Overall width (single axle)	131"
Overall width (tandem axle)	131"
Loading height (single axle)	90"
Loading height (tandem axle)	85" (550/45-22.5) / 92" (700/50-26.5) / 87" (425/22.5 recap)
Wheel hub capacity (tandem axle)	16,000 lbs. (10 bolt) x4
Tandem tire sizes	550/45-22.5, 700/50-26.5 or 425/22.5 recap
Wheel hub capacity (single axle)	20,000lbs (10 bolt) x2
Single tire sizes	710/70-38
Beater diameter	34"
Beater speed	420 RPM
PTO speed	1000 RPM
Apron chain link dia.	5/8"
Shipping weight	13,930 lbs.
Brakes available	Yes

Source: Tubeline Nitro 600 page.

Nitro spreader

Nitro 750

Commercial Nitro, 20 tons with silage extension option

20ton capacity

838cu. ft. heaped

36"vertical beaters

180HP required

Slip slide poly board floor and walls
Guillotine endgate and reversible apron chain
Quick-drop beaters, scale ready
CV shaft for tight turns

Full specifications

Carrying capacity	20 Ton (18,144 kg)
Heaped capacity	838 (1,038 w/ opt.ext.) cu. ft.
Struck capacity	560 (770 w/ opt.ext.) cu. ft.
Tractor HP required	180 HP
Inside dimensions	67"W x 58"D x 252"L
Overall length	32.5' (390")
Overall width (single axle)	140"
Overall width (tandem axle)	140"
Loading height (single axle)	100" (116" with optional silage extension)
Loading height (tandem axle)	102" (118" with optional silage extension)
Wheel hub capacity (tandem axle)	16,000 lbs. (10 bolt) x4
Tandem tire sizes	700/50-26.5 or 710/50-26.5 Radial
Wheel hub capacity (single axle)	20,000lbs (10 bolt) x2
Single tire sizes	710/70-42
Beater diameter	36"
Beater speed	420 RPM
PTO speed	1000 RPM
Apron chain link dia.	5/8"
Shipping weight	16,195 lbs.
Brakes available	Yes

Source: Tubeline Nitro 750 page.

Nitro spreader

Nitro 850

Commercial Nitro, 20 tons with a longer box

20ton capacity

855cu. ft. heaped

36"vertical beaters

200HP required

Slip slide poly board floor and walls
Guillotine endgate and reversible apron chain
Quick-drop beaters, scale ready
CV shaft for tight turns

Full specifications

Carrying capacity	20 Ton (18,144 kg)
Heaped capacity	855 (1,101 w/ opt.ext.) cu. ft.
Struck capacity	576 (804 w/ opt.ext.) cu. ft.
Tractor HP required	200 HP
Inside dimensions	67"W x 58"D x 262"L
Overall length	33.3' (399")
Overall width (single axle)	140"
Overall width (tandem axle)	140"
Loading height (single axle)	100" (117" with optional silage extension)
Loading height (tandem axle)	101" (118" with optional silage extension)
Wheel hub capacity (tandem axle)	16,000 lbs. (10 bolt) x4
Tandem tire sizes	700/50-26.5 or 710/50-26.5 Radial
Wheel hub capacity (single axle)	20,000lbs (10 bolt) x2
Single tire sizes	710/70-42
Beater diameter	36"
Beater speed	420 RPM
PTO speed	1000 RPM
Apron chain link dia.	3/4"
Shipping weight	17,520 lbs.
Brakes available	Yes

Source: Tubeline Nitro 850 page.

Nitro spreader

Nitro 855

The 850 box rated for 25 tons on 20,000 lb. hubs

25ton capacity

855cu. ft. heaped

36"vertical beaters

200HP required

Slip slide poly board floor and walls
Guillotine endgate and reversible apron chain
Quick-drop beaters, scale ready
CV shaft for tight turns

Full specifications

Carrying capacity	25 Ton (22,680 kg)
Heaped capacity	855 (1,101 w/ opt.ext.) cu. ft.
Struck capacity	576 (804 w/ opt.ext.) cu. ft.
Tractor HP required	200 HP
Inside dimensions	67"W x 58"D x 262"L
Overall length	33.3' (399")
Overall width (tandem axle)	140"
Loading height (tandem axle)	112" (129" with optional silage extension)
Wheel hub capacity (tandem axle)	20,000 lbs. (10 bolt) x4
Tandem tire sizes	750/60-30.5 Floatation or 750/60-30.5 Floatation (Radial)
Beater diameter	36"
Beater speed	420 RPM
PTO speed	1000 RPM
Apron chain link dia.	3/4"
Shipping weight	19,600 lbs.
Brakes available	Yes

Source: Tubeline Nitro 855 page.

Nitro spreader

Nitro 950

Commercial Nitro, 25-ton tandem

25ton capacity

1,028cu. ft. heaped

36"vertical beaters

200HP required

Slip slide poly board floor and walls
Guillotine endgate and reversible apron chain
Quick-drop beaters, scale ready
CV shaft for tight turns

Full specifications

Carrying capacity	25 Ton (22,680 kg)
Heaped capacity	1,028 (1,252 w/ opt.ext.) cu. ft.
Struck capacity	695 (918 w/ opt.ext.) cu. ft.
Tractor HP required	200 HP
Inside dimensions	67"W x 58"D x 297"L
Overall length	35.25' (423")
Overall width (tandem axle)	140"
Loading height (tandem axle)	109" (125" with optional silage extension)
Wheel hub capacity (tandem axle)	20,000 lbs. (10 bolt) x4
Tandem tire sizes	750/60-30.5 Floatation or 750/60-30.5 Floatation (Radial)
Beater diameter	36"
Beater speed	420 RPM
PTO speed	1000 RPM
Apron chain link dia.	3/4"
Shipping weight	19,890 lbs.
Brakes available	Yes

Source: Tubeline Nitro 950 page.

Nitro spreader

Nitro 950TRI

Tri-axle 950 with a following rear axle

25ton capacity

1,028cu. ft. heaped

36"vertical beaters

200HP required

Tri-axle spreads the load to cut soil compaction
Following axle reduces tire wear in turns
Horst Road Flex suspension on each axle
Brakes available on the centre and rear axles

Full specifications

Carrying capacity	25 Ton (22,680 kg)
Heaped capacity	1,028 (1,252 w/ opt.ext.) cu. ft.
Struck capacity	695 (918 w/ opt.ext.) cu. ft.
Tractor HP required	200 HP
Inside dimensions	67"W x 58"D x 297"L
Overall length	35.25' (423")
Overall width (tri axle)	155"
Loading height (tri-axle)	108" (124" with optional silage extension)
Wheel hub capacity	16,000 lbs. (10 bolt) x6
Tire sizes	700/50-26.5 Floatation or 710/50-26.5 Radial Tires
Beater diameter	36"
Beater speed	420 RPM
PTO speed	1000 RPM
Apron chain link dia.	3/4"
Shipping weight	22,340 lbs./10,133 kg
Brakes available	Yes

Source: Tubeline Nitro 950TRI page.

Nitro spreader

Nitro 1050

The largest Nitro: 30 tons on a tri-axle

30ton capacity

1,159cu. ft. heaped

36"vertical beaters

200HP required

Slip slide poly board floor and walls
Guillotine endgate and reversible apron chain
Quick-drop beaters, scale ready
Optional Michelin CargoXBib flotation tires

Full specifications

Carrying capacity	30 Ton (27,216 kg)
Heaped capacity	1,159 (1,509 w/ opt.ext.) cu. ft.
Struck capacity	769 (1,159 w/ opt.ext.) cu. ft.
Tractor HP required	200 HP
Inside dimensions	67"W x 58"D x 324"L
Overall length	39.25' (471")
Overall width (tri axle)	155"
Loading height (tri-axle)	108" (124" with optional silage extension)
Wheel hub capacity	16,000 lbs. (10 bolt) x6
Tire sizes	700/50-26.5
Beater diameter	36"
Beater speed	420 RPM
PTO speed	1000RPM
Apron chain link dia.	3/4"
Shipping weight	25,755 lbs./11,682 kg
Brakes available	Yes

Source: Tubeline Nitro 1050 page.

Tubeline processor

Tubeline Bale BOSS 1

Loader-mounted large square bale processor

1square bale

18-40GPM hydraulic flow

1,590lbs. (3720HF)

3models

Scoop N' Go loading
Restrictor bars stop loose bales flaking
Deflector moves from bedding to feeding to windrowing
Fits skid steer, tractor loader or telehandler

Full specifications

Models	BOSS 3720HF / BOSS 3820HF / BOSS 4920
Bale capacity	1
Bale size	36" x 36" x 84" / 36" x 36" x 96" / 48" x 48" x 96"
Bale material	Straw/Hay
Min. hydraulic flow	18-40 GPM / 2500 P.S.I.
High flow motor	Yes
Case drain required	Yes
Weight	1,590 lbs. / 1,640 lbs. / 3,300 lbs.
Mount	3720HF and 3820HF: Universal Skidsteer Mount / Quick Attach (opt.); 4920: Quick Attach
Dimensions (LWH) (w/ opt. top beater kit)	110" x 52" x 53" (110" x 52" x 63") / 122" x 52" x 53" (122" x 52" x 63") / 74.75" x 146.5" x 68" (NA)

Source: Tubeline Bale BOSS 1 page.

Tubeline processor

Tubeline Bale BOSS 2

Trailed processor that carries two square bales

2bale capacity

38flails

80-180HP (BOSS 2)

540 or 1,000RPM PTO

Self loading: one bale on the table, one on the forks
Belt-driven flail rotor
Hydraulic top paddle roller (BOSS 2)
HD model for 120-250 HP tractors

Full specifications

Models	BOSS 2 / BOSS 2 HD
Tractor HP	80-180 / 120-250 HP
Tires	12.5L x 15
Weight	4,170 lbs. / 5,150 lbs.
Dimensions (LWH)	126" x 140" x 90" / 126" x 144" x 94"
Bale capacity	2
PTO	540 or 1,000 RPM
Drive belt	37 mm / 87 mm
Number of flails	38
Top paddle roller	Yes / NA
Deflector	BOSS 2: Man / Hyd (opt.); BOSS 2 HD: Hyd
Bale size	36" x 36" x 108" / 48" x 36" x 108" / 48" x 48" x 108"

Source: Tubeline Bale BOSS 2 page.

Tubeline processor

Tubeline Bale BOSS 4

Self-loading processor that hauls four 4x4x9 bales

4bales (4x4x9)

11,000lbs. shipping

120-250HP

17'bale bed

Four bale spears lift a whole stack
Belt-driven flail rotor
Dual apron chains
Adjustable hitch and tongue height

Full specifications

Overall length	28'
Overall width	12.5'
Bale bed length	17'
Bale bed width	8'
Weight	11,000 lbs.
Bale capacity	4 - 4' x 4' bales
Bale size	3' x 3' x 9' / 4' x 3' x 9' / 4' x 4' x 9'
Tires	Tandem Lug Tires 12.4x24x8
Adjustable tongue height	Yes
Tractor HP	120-250 HP

Source: Tubeline Bale BOSS 4 page.

Tubeline processor

Tubeline Bale BOSS R

Loader-mounted round bale processor

4'max. bale width

6'max. bale diameter

1,900lbs.

18GPM min. flow

Hydraulic loading arm lifts a round bale
Apron chain feeds the flail
Wired controller
Adjustable deflector

Full specifications

Min. hydraulic flow (GPM / PSI)	18 / 2500 P.S.I.
Weight	1,900 lbs.
Width	85"
Length	74"
Height	76"
Bale size	Up to 4 ft wide / Up to 6 ft diameter

Source: Tubeline Bale BOSS R page.

Tubeline processor

Tubeline Bale Gator 334

Compact bedding chopper for mini skid steers

800lbs.

40ft. max. throw

18-50HP carrier

8-12GPM

Front self-loading
Wireless controller, no wiring harness
Reversible augers with bolt-on knives
2-stage electric deflector and side discharge

Full specifications

Overall dimensions	80"L x 62"W x 75"H
Bale chamber	46"L x 47"W x 42"H
Bale size	46"L x 36"W x 36"H
Weight	800 lbs.
Throwing distance	Up to 40 ft.
Auger drive	#60 Roller Chain
Carrier	Mini Skidsteer/Skidsteer, 18-50 HP
Required GPM	8-12 @ 3000 PSI
Case drain required	Yes
Power supply	12V DC (10 amp)

Source: Tubeline Bale Gator 334 page.

Tubeline processor

Tubeline Bale Gator 346

Low-profile bedding chopper with a 32" fan

1,450lbs.

50ft. max. throw

45-65HP carrier

32"fan

Narrow, low profile for low headroom
Wireless controller, no wiring harness
Reversible augers with bolt-on knives
Side discharge with reversing fan

Full specifications

Overall dimensions	95”L x 57”W x 75”H
Bale chamber	72”L x 53”W x 40”H
Bale size	72”L x 48”W x 36”H
Weight	1,450 lbs.
Throwing distance	Up to 50 ft.
Auger drive	#60 Double Roller Chain
Carrier	Skidsteer/Mini Wheel Loader, 45-65 HP
Required GPM	22-30 @ 3000 PSI
Case drain required	Yes
Power supply	12V DC (10 amp)

Source: Tubeline Bale Gator 346 page.

Tubeline processor

Tubeline Bale Gator 348

Bedding chopper for 8 ft square bales

96"bale length

1,850lbs.

70-90HP carrier

36-42GPM (348X)

Fits front-end loaders and large skid steers
Wireless controller, no wiring harness
Reversible augers with bolt-on knives
348X model for 36-42 GPM

Full specifications

Models	Gator 348 / Gator 348X
Overall dimensions	128”L x 62”W x 75”H
Bale chamber	102”L x 53”W x 42”H
Bale size	96”L x 48”W x 36”H
Weight	1,850 lbs.
Auger drive	#60 Double Roller Chain
Carrier	Front End Loaders/Large SkidSteers, 70-90 HP
Required GPM	22-30 @ 3000 PSI / 36-42 @ 3000 PSI
Case drain required	Yes
Power supply	12V DC (10 amp)

Source: Tubeline Bale Gator 348 page.

Tubeline processor

Tubeline BaleFeeder BF8000S

Stationary round bale feeder

6'max. round bale

2,500lbs. max. bale

12GPM

22.5°table tilt

Retractable drum fingers unravel the bale
Live floor with two apron chains
Hydraulic table tilts up to 22.5°
Hay, straw, baleage or silage

Full specifications

Unit type	Stationary
Min. hydraulic flow	12 GPM
Height	60"
Width	96"
Length	103"
Weight	2,400 lbs.
For use with	Hay, Straw, Baleage, Silage
Bale size	4-5' Wide up to 6' Round
Bale weight	2,500 lbs. maximum

Source: Tubeline BaleFeeder BF8000S page.

Tubeline processor

Tubeline BaleFeeder BF8000SL

Self-loading round bale feeder

2bale capacity

2,500lbs. max. bale

12GPM

3,700lbs.

Hydraulic loading arm with two-prong spear
Carries a second bale to the field
Loading arm position indicator
Hydraulic table tilts up to 22.5°

Full specifications

Unit type	Trailed, Self Loading
Min. hydraulic flow	12 GPM
Height	66"
Width	119"
Length	221"
Weight	3,700 lbs.
For use with	Hay, Straw, Baleage, Silage
Bale size	4-5' Wide up to 6' Round
Bale weight	2,500 lbs. maximum

Source: Tubeline BaleFeeder BF8000SL page.

Tubeline hay tool

Tubeline Accelerator 7500T / 9500T

Hay conditioner that crimps stems for faster drying

7' / 9'roll width

15mph max.

540RPM PTO

9paddles per roll

Adjustable steel crimping rollers
Cracks stems without knocking off leaves
Adjustable rear deflectors shape the windrow
Walking-beam tandem axle and brush oiler

Full specifications

Models	7500T / 9500T
Roll width	7' / 9'
Paddles per roll	9
PTO speed	540
Axle	Tandem
Width	132” / 156”
Length	153”
Weight (lbs.)	2,900 / 3,000

Source: Tubeline 7500T / 9500T Accelerator page.

Tubeline hay tool

Tubeline Accumul8 and Grabber

Gathers 8, 10 or 12 small square bales into one pack

8 / 10 / 12bales per pack

640lbs. Grabber (AC800G)

8'wide 10-bale pack

1,686lbs. (AC800)

Mechanical: no hydraulics, PTO or electrical connections
Tows behind the baler, or a truck with the optional hitch adaptor
Flotation tires
Grabber tines lift whole packs onto trailers

Full specifications

Models	AC800 / AC1000 / AC1200*
Bale capacity	8 / 10 / 12
Shipping weight	1,686 lbs. / 1,935 lbs. / 1,886 lbs.
Dimensions	98" x 180" / 98" x 212" / 98" x 212"
Grabber models	AC800G / AC1000G / AC1200G
Grabber bale capacity	8 / 10 / 12
Grabber shipping weight	640 lbs. / 720 lbs. / 800 lbs.
Grabber dimensions	80"x 76” / 103" x 78" / 115" x 78"

Source: Tubeline Accumul8 page.

Tubeline hay tool

Tubeline Accumul8 Retriever

Skid steer bale accumulator with a 10-bale grapple

10bales per pack

24grapple hooks

905lbs.

34" - 40"bale length

Retriever and grapple in one tool
Toolless changeover
Cross-over pattern builds a stable stack
Skid steer mount standard

Full specifications

Bale capacity	10 Bales
Bale length (min-max)	34" - 40"
Height	22"
Width	82"
Length	98.75"
Weight	905 LBS.
Hydraulic cylinder	2-1/2 x 8
Grapple hooks	24
Hydraulic hoses	72"
Mount	Skid Steer

Source: Tubeline Accumul8 Retriever page.

Tubeline hay tool

Tubeline Technobale 980

Self-loading wagon for large round bales

8-10round bales on the bed

120HP min.

2auxiliary outlets

45degree tilt bed

Pick-up arm spins the bale before lifting
Follows the baler path, no cross-tracking
Scissor push ram cuts cycle time
Bed tilts up to 45 degrees to unload in a row

Full specifications

Auxiliary outlets required	2
Tractor HP	120 HP min
Tires	15/55 x 17” 18 Ply
Hub ratings	8 Stud, 12,000 lbs.
Length	25'
Width	10'
Operating width	12'
Shipping weight	7,200 lbs.
Bale capacity	10 (4' x 4' to 4' x 5') / 8 (5' x 5' to 5' x 6')
Bale capacity on arm	1

Source: Tubeline Technobale page.

Inline bale wrappers at a glance

Model	TL50	TL60	TL70	TLR5000
Overall length	18'	20'	25' 6"	18'
Weight	6,300 lbs.	7,600 lbs.	9,600 lbs.	5,100 lbs.
Power	13 HP Honda c/w 11 GPM Pump	13 HP Honda c/w 11 GPM Pump	20 HP Honda c/w 16 GPM Pump w/ Hyd. Cooler	13 HP Honda c/w 11 GPM Pump
Round bales	Up to 6'	Up to 6'	Up to 6'	Up to 6'
Square bales	N/A	Up to 3' x 3' x 6' & 4' x 4' x 6'	Up to 4' x 4' x 6' / Up to 3' x 3' x 7'	N/A
Film stretcher	(2) 30" x 55%	(2) 30" x 55%	(2) 30" x 55%	(2) 30" x 55%
Roll-off tail	Fixed	Fixed	Hydraulic Lift	Fixed

Individual bale wrappers at a glance

Model	TL1000R	TL1100R	TL1700SR	TL360	TL645
Length	104"	118"	192"	164"	241"
Width	80"	79"	82"	119"	100"
Height	84"	88"	95"	133"	113"
Weight	1,600 lbs.	–	2,865 lbs.	5,100 lbs.	–
HP required	30 HP	–	30 / 30 / - / 30 / -	60HP	60 HP
Hitch	–	3PH (Category II)	Trailer (Clevis)	Clevis	Clevis

Nitro vertical spreaders at a glance

Model	300LS	340LS	440LS	275RS	375RS	575RS	725RS	450	600	750	850	855	950	950TRI	1050
Carrying capacity	6 Ton (5,443 kg)	8 Ton (7,257 kg)	10 Ton (9,072 kg)	10 Ton (9,072 kg)	13 Ton (11,793 kg)	16 Ton (14,515 kg)	19 Ton (17,237 kg)	13 Ton (11,793 kg)	17 Ton (15,422 kg)	20 Ton (18,144 kg)	20 Ton (18,144 kg)	25 Ton (22,680 kg)	25 Ton (22,680 kg)	25 Ton (22,680 kg)	30 Ton (27,216 kg)
Heaped capacity	300 cu. ft.	344 cu. ft.	440 cu. ft.	294 cu. ft.	444 cu. ft.	576 cu. ft.	767 cu. ft.	481 cu. ft.	636 cu. ft.	838 (1,038 w/ opt.ext.) cu. ft.	855 (1,101 w/ opt.ext.) cu. ft.	855 (1,101 w/ opt.ext.) cu. ft.	1,028 (1,252 w/ opt.ext.) cu. ft.	1,028 (1,252 w/ opt.ext.) cu. ft.	1,159 (1,509 w/ opt.ext.) cu. ft.
Tractor HP required	50 HP	60 HP	100 HP	80 HP	90 HP	125 HP	165 HP	125 HP	150 HP	180 HP	200 HP	200 HP	200 HP	200 HP	200 HP
Beater diameter	32"	32"	32"	34"	34"	34"	36"	34"	34"	36"	36"	36"	36"	36"	36"
PTO speed	540 RPM	540 RPM	540 RPM	1000 RPM	1000 RPM	1000RPM	1000RPM	1000 RPM	1000 RPM	1000 RPM	1000 RPM	1000 RPM	1000 RPM	1000 RPM	1000RPM
Overall length	23'5" (281")	24.5' (297")	27.5' (330")	23'5" (281")	25' (300")	27.5’ (330")	30.3' (363")	27' (324")	29.5' (354")	32.5' (390")	33.3' (399")	33.3' (399")	35.25' (423")	35.25' (423")	39.25' (471")
Shipping weight	6,250 lbs.	7,128 lbs.	8,050 lbs.	8,800 lbs.	9,139 lbs.	11,000 lbs. / 4,990 kg	15,652 lbs. / 7,099 kg	11,355 lbs.	13,930 lbs.	16,195 lbs.	17,520 lbs.	19,600 lbs.	19,890 lbs.	22,340 lbs./10,133 kg	25,755 lbs./11,682 kg

Bale processors and feeders at a glance

Model	Bale BOSS 1	Bale BOSS 2	Bale BOSS 4	Bale BOSS R	Bale Gator 334	Bale Gator 346	Bale Gator 348	BaleFeeder BF8000S	BaleFeeder BF8000SL
Bale size	36" x 36" x 84" / 36" x 36" x 96" / 48" x 48" x 96"	36" x 36" x 108" / 48" x 36" x 108" / 48" x 48" x 108"	3' x 3' x 9' / 4' x 3' x 9' / 4' x 4' x 9'	Up to 4 ft wide / Up to 6 ft diameter	46"L x 36"W x 36"H	72”L x 48”W x 36”H	96”L x 48”W x 36”H	4-5' Wide up to 6' Round	4-5' Wide up to 6' Round
Bale capacity	1	2	4 - 4' x 4' bales	–	–	–	–	–	–
Weight	1,590 lbs. / 1,640 lbs. / 3,300 lbs.	4,170 lbs. / 5,150 lbs.	11,000 lbs.	1,900 lbs.	800 lbs.	1,450 lbs.	1,850 lbs.	2,400 lbs.	3,700 lbs.
Tractor HP	–	80-180 / 120-250 HP	120-250 HP	–	–	–	–	–	–
Min. hydraulic flow	18-40 GPM / 2500 P.S.I.	–	–	–	–	–	–	12 GPM	12 GPM

Hay conditioning and bale handling at a glance

Model	Accelerator 7500T / 9500T	Accumul8 and Grabber	Accumul8 Retriever	Technobale 980
Bale capacity	–	8 / 10 / 12	10 Bales	10 (4' x 4' to 4' x 5') / 8 (5' x 5' to 5' x 6')
Width	132” / 156”	–	82"	10'
Length	153”	–	98.75"	25'
Shipping weight	–	1,686 lbs. / 1,935 lbs. / 1,886 lbs.	–	7,200 lbs.

Tubeline parts and manuals

Tubeline posts operator's and parts manuals for its wrappers, Bale BOSS processors, BaleFeeders and Nitro spreaders on its support page, including older inline wrappers back to 1998. Have your model and serial number ready when you ask the Clinton Tractor parts counter about a part.

Apron chains and connecting links
Replaceable reversible beater knives
Galvanized slats
Slip slide poly boards
Pre-tensioners
Film Snap cutters
Guide rollers
Flail rotors
Drive belts
Retractable feeder fingers
Gator auger knives
Bale spears

Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

What goes into Tubeline wrappers, spreaders and processors

01Knurled pre-tensioners
On inline wrappers, knurled rollers grip and pull the film to about 55% stretch, which activates the film's bonding agent.
02Film Snap
Standard on every inline wrapper. Hold the plunger and the Film Snap bar cuts the wrap without stopping the cycle.
03Guillotine endgate
On Nitro spreaders the endgate can be held partly open to meter material to the beaters, for lime and many manure consistencies.
04CV shaft
Every Nitro has a constant velocity shaft for a tighter turning radius and less driveline chatter in tight turns.
05Reversible Gator augers
Bale Gator augers carry bolt-on replaceable knives and can run in reverse to help prevent jams.

3-year inline wrapper warranty

Tubeline inline wrappers carry a 3 Year Limited Warranty.

Warranty terms

In the first year from the date on which the equipment was purchased the company’s liability shall be limited exclusively to the original owner to replace or repair without charge, at its factory or elsewhere, at its discretion, any defects in material or workmanship which become apparent.

In the second and third year the company will supply at no charge replacement of defective parts only. Installation and freight will be at the expense of the owner.

Lifetime apron chain warranty

Nitro spreaders carry an Apron Chain Limited Lifetime Warranty.

Apron chain terms

Under the Apron Chain Limited Lifetime Warranty, Tubeline will replace a broken apron chain or connecting link on any Nitro model manure spreader. Restrictions may apply.

Apron Chain Limited Lifetime Warranties are non-transferable.

Based in Elmira, Ontario

Tubeline's main office and its Floradale plant are both in Elmira, Ontario, Canada.

About the maker

Tubeline Manufacturing sold its first inline balewrapper in 1995.

The maker says its balewrappers are shipped to 6 continents.

Options

Tubeline lists these options on its product pages. Not every option fits every model, so ask us which ones suit the machine you are looking at.

Laser guidance system
A laser keeps an inline wrapper tracking a set distance from another bale tube, a fence line or dense crop.
Inline wrappers
Bale Dispatch arm
A spring-assisted arm lowers across the tail so one ram cycle pushes off the last bale.
Select inline wrappers
Spinner deck
Swap the vertical beaters for a spinner deck to spread poultry litter and other loose material.
Nitro spreaders
Digi-Star scale
A 5-point 60,000 lb. weigh beam system: four load cells under the box and one on the hitch.
All Nitro models
Optional colours
Besides standard yellow, Nitro spreaders come in red, green, blue and orange.
Nitro spreaders

Also available

Offset twin wrap kit
Two film rolls through one stretcher, with the front edge of the wrap offset up to 4".
Inline wrappers (standard on TL70)
Wireless film sensor
Shuts the hoop down when the film breaks or runs out.
Inline wrappers
Road Flex suspension axle
Horst Wagons Road Flex suspension adds shock protection on the road and while wrapping.
Select inline wrappers
Silage extensions
Height extenders let select Nitro and Nitro RS spreaders haul silage. Not recommended for manure.
725RS and Nitro 600 to 1050
Athene ISOBUS control
Runs spreader controls, the scale and variable rate through an ISOBUS terminal.
Nitro spreaders
Enhanced rubber seal kit
A U-shape compression seal on the front panel and endgate helps contain semi-solids.
Nitro spreaders
Narrow track width
For berry or produce fields.
Bale BOSS 2

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday

Get directions (315) 853-6151

Driving distance

New Hartford 6 mi
Utica 9 mi
Rome 14 mi
Oneida 17 mi
Hamilton 20 mi
Herkimer 26 mi
Cazenovia 31 mi
Norwich 42 mi
Cooperstown 47 mi
Syracuse 49 mi
Oneonta 60 mi
Cortland 61 mi

Before you visit

Can I see Tubeline bale wrappers, processors and spreaders in person?

Call (315) 853-6151 before you drive over and ask which Tubeline bale wrappers, processors and spreaders we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.

Tubeline Bale Wrapper and Spreader Dealer in Central New York

Inline bale wrappers

Individual bale wrappers

Nitro vertical spreaders

Bale processors and feeders

Hay conditioning and bale handling

About Tubeline Manufacturing

Compare Tubeline bale wrappers, processors and spreaders

Tubeline TL50

Tubeline TL60

Tubeline TL70

Tubeline TLR5000

Tubeline TL1000R

Tubeline TL1100R

Tubeline TL1700SR

Tubeline TL360

Tubeline TL645

Nitro 300LS

Nitro 340LS

Nitro 440LS

Nitro 275RS

Nitro 375RS

Nitro 575RS

Nitro 725RS

Nitro 450

Nitro 600

Nitro 750

Nitro 850

Nitro 855

Nitro 950

Nitro 950TRI

Nitro 1050

Tubeline Bale BOSS 1

Tubeline Bale BOSS 2

Tubeline Bale BOSS 4

Tubeline Bale BOSS R

Tubeline Bale Gator 334

Tubeline Bale Gator 346

Tubeline Bale Gator 348

Tubeline BaleFeeder BF8000S

Tubeline BaleFeeder BF8000SL

Tubeline Accelerator 7500T / 9500T

Tubeline Accumul8 and Grabber

Tubeline Accumul8 Retriever

Tubeline Technobale 980

Inline bale wrappers at a glance

Individual bale wrappers at a glance

Nitro vertical spreaders at a glance

Bale processors and feeders at a glance

Hay conditioning and bale handling at a glance

Tubeline parts and manuals

Service department

What goes into Tubeline wrappers, spreaders and processors

01Knurled pre-tensioners

02Film Snap

03Guillotine endgate

04CV shaft

05Reversible Gator augers

3-year inline wrapper warranty

Lifetime apron chain warranty

Based in Elmira, Ontario

Options

Laser guidance system

Bale Dispatch arm

Spinner deck

Digi-Star scale

Optional colours

Also available

Offset twin wrap kit

Wireless film sensor

Road Flex suspension axle

Silage extensions

Athene ISOBUS control

Enhanced rubber seal kit

Narrow track width

Find us in Clinton

Driving distance

Before you visit