Teagle Bale Processors in Clinton, NY

Showing all 20 models

Tomahawk straw blower

Tomahawk 6100H

Flexible and compact, Teagle's latest straw blower

60cu. ft. capacity

39 ftmax. blow distance

3,086 lbsmin. handler lift

• Hydraulic drive suits skid steers and mini loaders, or a tractor three-point hitch or front loader
• Takes half a rectangular bale or one 5 ft round bale
• Pause and run modes from a Wi-Fi control box in the cab
• Load-sensing control reverses the bed chain and crossbeater when overloaded
• Chute rotates 280 degrees; optional hydraulic bale clamp and side extensions

Full specifications

Chute	Swivel
Dual Chop	No
Silage	No
Straw	Spread
Crossbeaters	1
Capacity (cu. ft.)	60
No. of 6' round bales	1
Max. blow distance	39'
Min. tractor power	70HP / 53kW
Overall width (chute closed)	68" / 71" with bale clamp
Overall height (chute closed)	81"
Unladen weight	1,713 lbs / 1,891 lbs with bale clamp
Oil flow (min. / max.)	10.5 / 20 gpm (13.2 / 20 gpm with bale clamp)
Oil pressure (min. / max.)	2,321 / 3,045 psi
Lift capacity (min.)	1.4 tons / 2800 lbs

Source: Teagle Tomahawk 6100H page.

Tomahawk straw blower

Tomahawk 6200H

Hydraulic-drive straw blower for telehandlers, pivot steers and tractors, with no PTO required.

88cu. ft. capacity

6,173 lbsmin. lift capacity

80 hpmin. tractor power

• Hydraulic drive for telehandlers and pivot steers; a tractor three-point hitch can also be used
• Takes a full 4 ft x 4 ft x 8 ft rectangular bale or a 5 ft round bale, straw or dry hay
• Hydraulic loading gate with adjustable bale beam for self loading
• Load-sensing control reverses the bed chain and crossbeater when overloaded
• Wi-Fi control desk; the fan can be paused to move between sheds

Full specifications

Chute	Swivel
Dual Chop	No
Silage	No
Straw	Spread
Crossbeaters	1
No. of 6' round bales	1
No. of 8' rect. bales (4' x 3' / 4' x 4')	1/1
Bale chamber (tailgate down) W x H x L	55" x 47" x 114"
Min. tractor power	80HP / 60kW
Overall width (chute closed)	66"
Overall length (tailgate up)	107"
Overall length (tailgate/bale clamp down)	157"
Overall height (chute closed)	99"
Unladen weight	3,328 lbs
Oil flow (min. / max.)	13.3 / 26.6 gpm
Oil pressure (min. / max.)	2,320 / 3,915 psi
Lift capacity (min.)	6,173 lbs

Source: Teagle Tomahawk 6200H page.

Tomahawk straw blower

Tomahawk 6200P

The 6200 Power Drive: PTO fan power with hydraulic crossbeater control, for tractors.

88cu. ft. capacity

66 ftmax. blow distance

90 hpmin. tractor power

• PTO-driven fan with a hydraulic crossbeater, for tractors from 90 hp
• Takes a full 4 ft x 4 ft x 8 ft rectangular bale or a 5 ft round bale, straw or dry hay
• Wi-Fi control desk runs all functions, including the loading gate and a pause and resume button
• Auto reverse operates when the crossbeater is overloaded
• Three-stage chute with Hardox wearing surfaces

Full specifications

Chute	Swivel
Dual Chop	No
Silage	No
Straw	Spread
Crossbeaters	1
Capacity (cu. ft.)	88
No. of 5' round bales	1
No. of 8' rect. bales (4' x 2'6" / 4' x 4')	1
Bale chamber (tailgate down) W x H x L	56" x 47" x 114"
Max. blow distance	66 ft
Min. tractor power	90HP
Overall width (chute closed)	66"
Overall length (tailgate up)	115"
Overall length (tailgate/bale clamp down)	158"
Overall height (chute closed)	93"
Unladen weight	3,475 lbs
Oil flow (min. / max.)	9.2 - 15.9 gpm

Source: Teagle Tomahawk 6200P page.

Tomahawk feeder-bedder

Tomahawk 8200M

Three-point mounted Synchro processor for feeding and bedding

113cu. ft. capacity

65 ftmax. blow distance

140 hpmin. tractor power

• Processes straw, hay or silage bales, or clamp silage
• Three-point mounted version of the 8200; a trailed version is also offered
• Synchro system starts and stops spreading at the touch of a button
• Larger crossbeater than the 7100 and 8100 it replaces, with 54 blades
• Hardox chute wearing surfaces; the maker says service life is up to 3 times longer than standard steel

Full specifications

Chute	Swivel
Dual Chop	No
Silage	Yes
Straw	Spread
Crossbeaters	1
Capacity (cu. ft.)	113
No. of 6' round bales	2
No. of 8' rect. bales (4' x 2'6" / 4' x 4')	1/1
Bale chamber (tailgate down) W x H x L	56" x 53" x 118"
Max. blow distance	65'
Min. tractor power	140HP / 105kW
PTO speed	1,000 rpm
Overall width (chute closed)	74"
Overall length (tailgate up)	119"
Overall length (tailgate/bale clamp down)	192"
Overall height (chute closed)	95"
Unladen weight	4,458 lbs
Oil flow (min. / max.)	9 - 16 gpm

Source: Teagle Tomahawk 8200M page.

Tomahawk feeder-bedder

Tomahawk 8200T

Trailed Synchro processor for feeding and bedding

113cu. ft. capacity

65 ftmax. blow distance

60 hpmin. tractor power

• Trailed version of the 8200, with a 60 hp minimum tractor
• Processes straw, hay or silage bales, or clamp silage
• Synchro system starts and stops spreading at the touch of a button
• Wi-Fi control desk keeps the controls in the cab
• Stone trap hatch at the rear clears stones and debris

Full specifications

Chute	Swivel
Dual Chop	No
Silage	Yes
Straw	Spread
Crossbeaters	1
Capacity (cu. ft.)	113
No. of 6' round bales	2
No. of 8' rect. bales (4' x 2'6" / 4' x 4')	1/1
Bale chamber (tailgate down) W x H x L	56" x 53" x 118"
Max. blow distance	65'
Min. tractor power	60HP / 45kW
PTO speed	540 rpm
Overall width (chute closed)	80"
Overall length (tailgate up)	162"
Overall length (tailgate/bale clamp down)	235"
Overall height (chute closed)	101"
Unladen weight	4,879 lbs
Tire size	10.00/75-15.3
Oil flow (min. / max.)	9 - 16 gpm

Source: Teagle Tomahawk 8200T page.

Tomahawk feeder-bedder

Tomahawk 8250M

Three-point mounted Dual Chop: long or short straw at the touch of a button

113cu. ft. capacity

65 ftmax. blow distance

150 hpmin. tractor power

• Third-generation Dual Chop: the maker says chopping speed is up 40%
• Synchro system starts and stops spreading at the touch of a button
• Replaces the 7150 model, with a large increase in processing capacity
• Screens in 2 in, 1 9/16 in (standard) and 1 3/16 in sizes
• Automatic chain oiler for the crossbeater drive is standard on Dual Chop 8250 models

Full specifications

Chute	Swivel
Dual Chop	Yes
Silage	No
Straw	Chop/Spread
Crossbeaters	1
Capacity (cu. ft.)	113
No. of 6' round bales	2
No. of 8' rect. bales (4' x 2'6" / 4' x 4')	1/1
Bale chamber (tailgate down) W x H x L	56" x 53" x 118"
Max. blow distance	65'
Min. tractor power	150HP / 113kW
PTO speed	540 rpm
Overall width (chute closed)	74"
Overall length (tailgate up)	118"
Overall length (tailgate/bale clamp down)	189"
Overall height (chute closed)	96"
Unladen weight	4,775 lbs
Oil flow (min. / max.)	9 - 16 gpm

Source: Teagle Tomahawk 8250M page.

Tomahawk feeder-bedder

Tomahawk 8250T

Trailed Dual Chop: long or short straw at the touch of a button

113cu. ft. capacity

65 ftmax. blow distance

80 hpmin. tractor power

• Trailed Dual Chop machine that replaces the 8150
• Third-generation Dual Chop: the maker says chopping speed is up 40%
• Synchro system starts and stops spreading at the touch of a button
• Bale beam on the tailgate adjusts between one loading and six operating positions
• Road lights and mudguards are standard on trailed models

Full specifications

Chute	Swivel
Dual Chop	Yes
Silage	No
Straw	Chop/Spread
Crossbeaters	1
Capacity (cu. ft.)	113
No. of 6' round bales	2
No. of 8' rect. bales (4' x 2'6" / 4' x 4')	1/1
Bale chamber (tailgate down) W x H x L	56" x 53" x 118"
Max. blow distance	65'
Min. tractor power	80HP / 60kW
PTO speed	540 rpm
Overall width (chute closed)	80"
Overall length (tailgate up)	162"
Overall length (tailgate/bale clamp down)	235"
Overall height (chute closed)	101"
Unladen weight	5,196 lbs
Tire size	10.00/75-15.3
Oil flow (min. / max.)	9 - 16 gpm

Source: Teagle Tomahawk 8250T page.

Tomahawk wide-body processor

Tomahawk 8500

Teagle's original wide-body model, built for greater capacity, easier loading and higher output

159cu. ft. capacity

82 ftmax. blow distance

80 hpmin. tractor power

• Processes cornstalks, straw, hay and silage bales as well as clamp silage
• Crossbeater with 54 blades and a large fan with 8 replaceable paddles
• Resistant steel in the fan housing and chute; the maker says service life is up to 3 times longer
• Wi-Fi control desk; the machine needs only a 12v connection
• Slip clutch and overrun protection on the PTO

Full specifications

Chute	Side
Dual Chop	No
Silage	Yes
Straw	Yes
Crossbeaters	1
Capacity (cu. ft.)	159
No. of 6' round bales	2
No. of 8' rect. bales (4' x 2'6" / 4' x 4')	1/1
Bale chamber (tailgate down) W x H x L	67" x 49" x 117"
Max. blow distance	82'
Min. tractor power	80HP / 60kW
PTO speed	1,000 rpm
Overall width (chute closed)	96"
Overall length (tailgate up)	163"
Overall length (tailgate/bale clamp down)	212"
Overall height (chute closed)	102"
Unladen weight	4,586 lbs
Tire size	12.50/80-15.3
Oil flow (min. / max.)	9 - 16 gpm

Source: Teagle Tomahawk 8500 page.

Tomahawk wide-body processor

Tomahawk 8555

Dual Chop bale processor: chops straw short or spreads it long, and also processes clamp and baled silage.

159cu. ft. capacity

72 ftmax. blow distance

80 hpmin. tractor power

• Three modes with a removable screen and optional bypass frame: Short Chop, Shred and Distribute
• Dual Chop changes straw output from a short chop of about 2 in to no chop at the touch of a button
• Crossbeater with 168 Hardox rippers
• Screen size can be changed through the side of the machine
• Auto chain oiling for the crossbeater drive recommended for high-use operations

Full specifications

Chute	Swivel
Dual Chop	Yes
Silage	No
Straw	Yes
Crossbeaters	1
Capacity (cu. ft.)	159
No. of 6' round bales	2
No. of 8' rect. bales (4' x 2'6" / 4' x 4')	1/1
Bale chamber (tailgate down) W x H x L	67" x 49" x 117"
Max. blow distance	72'
Min. tractor power	80HP / 60kW
PTO speed	1,000 rpm
Overall width (chute closed)	85"
Overall length (tailgate up)	163"
Overall length (tailgate/bale clamp down)	212"
Overall height (chute closed)	109"
Unladen weight	5,324 lbs
Tire size	12.50/80-15.3
Oil flow (min. / max.)	9 - 16 gpm

Source: Teagle Tomahawk 8555 page.

Tomahawk wide-body processor

Tomahawk 9500

Compact format with twin crossbeaters for high output

283cu. ft. capacity

82 ftmax. blow distance

80 hpmin. tractor power

• Twin crossbeaters give an even output of clamp and chopped bale silage, and round or rectangular baled straw
• Hardox in the fan housing and chute
• 14 mm bed chain and 40 mm x 80 mm slats as standard
• Wi-Fi control desk; the machine needs only a 12v connection
• Available with a side chute (9500) or a swivel chute (9500SC)

Full specifications

Models	9500 (side chute) / 9500SC (swivel chute)
Chute	Side / Swivel
Dual Chop	No
Silage	Yes (not suitable for round bale silage unless chopped)
Straw	Yes
Crossbeaters	2
Capacity (cu. ft.)	283
No. of 6' round bales	3
No. of 8' rect. bales (4' x 2'6" / 4' x 4')	2/1
Bale chamber (tailgate down) W x H x L	67" x 61" x 157"
Max. blow distance	82' / 72'
Min. tractor power	80HP / 60kW
PTO speed	1,000 rpm
Overall width (chute closed)	98" / 87"
Overall length (tailgate up)	205"
Overall length (tailgate/bale clamp down)	249"
Overall height (chute closed)	114"
Unladen weight	6,629 lbs / 6,651 lbs
Tire size	305/55 R22
Oil flow (min. / max.)	9 - 16 gpm

Source: Teagle Tomahawk 9500 page.

Tomahawk wide-body processor

Tomahawk 1010

Teagle's biggest feeder bedder, with large capacity and high output

353cu. ft. capacity

82 ftmax. blow distance

80 hpmin. tractor power

• Twin crossbeaters give an even output of clamp and chopped bale silage, and round or rectangular baled straw
• Hardox in the fan housing and chute
• 14 mm bed chain and 40 mm x 80 mm slats as standard
• Air brake option for highway use
• Available with a side chute (1010) or a swivel chute (1010SC)

Full specifications

Models	1010 (side chute) / 1010SC (swivel chute)
Chute	Side / Swivel
Dual Chop	No
Silage	Yes (not suitable for round bale silage unless chopped)
Straw	Yes
Crossbeaters	2
Capacity (cu. ft.)	353
No. of 6' round bales	3 (not suitable for round bale silage unless chopped)
No. of 8' rect. bales (4' x 2'6" / 4' x 4')	4/2
Bale chamber (tailgate down) W x H x L	67" x 62" x 224"
Max. blow distance	82' / 72'
Min. tractor power	80HP / 60kW
PTO speed	540 rpm
Overall width (chute closed)	95"
Overall length (tailgate up)	243"
Overall length (tailgate/bale clamp down)	313"
Overall height (chute closed)	115"
Unladen weight	7,893 lbs / 7,915 lbs
Tire size	385/55 R22.5
Oil flow (min. / max.)	9 - 16 gpm

Source: Teagle Tomahawk 1010 page.

Tomahawk drum processor

Tomahawk 505M

One-step Processing - Mill or Shred for TMR, Cubicles, Poultry Bedding or Biomass

3.36tons/hr output (up to)

72 indrum diameter

80 hpmin. tractor power

• Processes round or rectangular bales of dry material to a consistent length from 3/8 in to 5 in, depending on mill screen size
• Rotor design that the maker says needs low horsepower for high output
• Mills dry material (under 20% moisture) with 40 blades; Hardox screens swap in with hole sizes from 3/8 in to 5 in
• Chutes on the left and right can be opened or shut independently
• Compatible with Cat. II and Cat. III linkages; the 505XLM is the long-drum version

Full specifications

Models	505M / 505XLM
Rotor	Mill
Round bale (max.)	5' / 2 x 5'
Quadrant bale (3' x 4' x 8')	N/A / 1
Overall height	96" / 110"
Overall length	92" / 148"
Drum diameter	72"
Drum length (std)	61" / 118"
Lower chute discharge height	15"
Upper chute discharge height	44"
Power (min.)	80HP / 60kW (505M); 100HP / 90kW (505XLM)
PTO speed	1,000 rpm
Transport width	79"
Operating width	123"
Straw giraffe discharge height	72"
Weight	2,315 lbs / 2,998 lbs

Source: Teagle Tomahawk 505M page.

Tomahawk drum processor

Tomahawk 5050

Bed down and Feed with the same machine

2.2tons/hr output (up to)

72 indrum diameter

80 hpmin. tractor power

• Spreads straw for bedding loose housing and mulching strawberries, and dispenses hay and silage for feeding
• Chopping rotor shreds round or rectangular bales and feeds either side of the machine
• Feeds clamp or baled silage, hay and root crops
• Maker says shredded long silage cuts selective feeding and wastage
• The 5050XL is the long-drum version

Full specifications

Models	5050 / 5050XL
Rotor	Chop
Round bale (max.)	5'
Quadrant bale (3' x 4' x 8')	N/A / 1
Hesston bale (4' x 4' x 8')	N/A / 1
Overall height	96" / 111"
Overall length	92" / 144"
Drum diameter	72"
Drum length (std.)	61" / 118"
Lower chute discharge height	15"
Upper chute discharge height	44" / 42"
Power (min.)	80HP / 60kW (5050); 100HP / 75kW (5050XL)
PTO speed	540 rpm
Transport width	81"
Operating width	95"
Straw giraffe discharge height	72"
Silage giraffe discharge height	60"
Weight	2,110 lbs / 2,794 lbs

Source: Teagle Tomahawk 5050 page.

Tomahawk drum processor

Tomahawk 505FSM

Stationary mill with a rear feed slide for non-stop processing

4.5tons/hr output (up to)

72 indrum diameter

120 hpmin. tractor power

• Processes round or rectangular bales of dry material to a consistent length from 3/8 in to 5 in
• Output can be calibrated by changing screens in the mill
• Rear hydraulically angled feed slide allows constant feed while the mill runs stationary
• Feed slide works horizontal for ground-level loading or inclined for dropped bales
• Wide-angle PTO with friction clutch overload protection is standard

Full specifications

Models	505FSM
Drum diameter	72"
Round bale (max.)	5'
Rectangular bale size (max.)	4' x 4'
Overall height (machine on ground)	101"
Width (with chutes closed)	79"
Lower chute discharge height	21"
Upper chute discharge height	49"
Overall length	162"
Operating width	123"
Weight	3,055 lbs
Power (min.)	120HP / 90kW
PTO speed	1,000 rpm
Short chop straw	Yes

Source: Teagle Tomahawk 505FSM page.

Tomahawk drum processor

Tomahawk 500B

Mill with a turbo fan that moves bedding up to 260 ft

2.5tons/hr output (up to)

260 ftmaterial transfer (up to)

80 hpmin. tractor power

• Turbo fan moves milled bedding up to 260 ft from the mill through a flexible hose or fixed manifold
• Radio remote control supplied as standard to start and stop material
• Mills dry material (under 20% moisture) with 40 blades; screens swap with hole sizes from 3/8 in to 2 in
• Lets you process outside and distribute inside, with less disturbance to livestock
• The 500BXLM is the long-drum version

Full specifications

Models	500BM / 500BXLM
Rotor	Mill
Round bale (max.)	5'
Quadrant bale (3' x 4' x 8')	N/A / 4' x 4'
Overall height	96" / 110"
Overall length	100" / 156"
Drum diameter	72"
Drum length (std)	61" / 118"
Lower chute discharge height	15"
Upper chute discharge height	44"
Power (min.)	80HP / 60kW (500BM); 120HP / 90kW (500BXLM)
PTO speed	1,000 rpm
Transport width (fan, no RHC)	99"
Operating width (fan, RHC open)	122"
Straw giraffe discharge height	60"
Weight	3,055 lbs / 3,703 lbs

Source: Teagle Tomahawk 500B page.

Tomahawk drum processor

Tomahawk 500E

No Tractor Required - Mill or Shred for TMR, Cubicles, Poultry Bedding or Biomass

3.9tons/hr output (up to)

45 kWelectric motor

71 inbale chamber diameter

• Automated feed conveyor and straw mill for round and rectangular bales
• 45 kW electric motor; no tractor required
• Can feed an automated processing system or fill a bunker on its own
• Dry material (under 20% moisture) processed from 3/8 in to 5 in by changing the mill screen
• Discharges at low or high level

Full specifications

Rotor	Mill
Round bale (max.)	5'
Rectangular bales	4' x 4' x 8'
Overall height	106"
Overall length	157"
Overall length with one conveyor	297"
Overall width	79"
Bale chamber diameter	71"
Power (min.)	45kW
Rotor speed	1,000 rpm
Weight	4,189 lbs
Conveyor weight	2,755 lbs

Source: Teagle Tomahawk 500E page.

Tomahawk drum processor

Tomahawk C120

The C120 Calibrator, replacing the C12, for consistent chop length at high output

33,069lbs/hr output (up to)

180 hpmin. tractor power

12,125lbs unladen

• Processes round or rectangular bales of dry material to a consistent length from 3/8 in to 5 in, depending on screen size
• Screen sizes change in minutes from ground level
• PTO speed automatically governs tub rotation to manage power loading
• Handles straw, hay, miscanthus, corn stover and horse manure; an optional hopper kit adds grain and maize
• Folding conveyor delivers up to 180 in high; air brakes fitted as standard

Full specifications

Transport width (folded)	94" (7' 10")
Transport width (unfolded)	122" (10' 2")
Transport length (folded)	231" (19' 3")
Transport height	129" (10' 9")
Overall length	359" (29' 11")
Loading height	111" (9' 3")
Conveyor discharge height (max.)	180" (15')
Bale chamber (diameter at base)	86" (7' 2")
Bale chamber (loading diameter)	118" (9' 10")
Power (min.)	180HP / 135kW
PTO speed	1,000 rpm
Tire	285/55 R22
Weight	12,125 lbs

Source: Teagle Tomahawk C120 page.

Teagle spreader or conditioner

XT24

Quadruple overlap spread pattern for smaller tractors and orchards

24cu. ft. hopper

40 ftmax. bout width

408 lbsweight

• Compact size suits smaller tractors and band spreading in orchards and vineyards
• Twin inward-spinning discs spread to the next tramline on both sides of the tractor
• Stainless steel spreading mechanism and sieve; double powder coated frame
• Removable LDPE hopper comes off with a single pin for cleaning
• Hydraulic shutter; the pages list a 3 Year Warranty

Full specifications

Capacity (cu. ft.)	24
Overall height	46"
Overall width	47"
Overall length	41"
Weight	408 lbs
Linkage	Cat 1 & 2
PTO speed	540 rpm
Bout width (max.)	40'

Source: Teagle XT24 page.

Teagle spreader or conditioner

XT48

Grassland spreader with a two-bag capacity

48cu. ft. hopper

40 ftmax. bout width

598 lbsweight

• Suited to grassland work needing a two-bag capacity
• Simple setting of application rate and bout width, with no vanes to adjust and no rotors to change
• Hydraulic shutter; stainless steel spreading mechanism and sieve
• Quadruple overlap spread pattern across the bout

Full specifications

Capacity (cu. ft.)	48
Overall height	50"
Overall width	76"
Overall length	51"
Weight	598 lbs
Linkage	Cat 2
PTO speed	540 rpm
Bout width (max.)	40'

Source: Teagle XT48 page.

Teagle spreader or conditioner

Super-ted 221

Swath conditioner for faster drying and less nutrient loss

7 ft 3 inpick-up width

60 hpmin. tractor power

1,753 lbsweight

• Lifts the crop and puts air into the swath so it dries more evenly from top to bottom
• Box-shaped swaths with clean edges, adjustable in width and offset with the rear doors
• 8 rows of spring steel twin-fork tines, each with a retainer
• Adjustable hood sets conditioning intensity

Full specifications

Pick-up width	7' 3" (2.20m)
Overall width (with wheels / without wheels)	3.10m / 2.54m
Overall length - doors open	3.27m
Overall length - doors closed	1.86m
Overall height - in lowest working position	1.04m
Height adjustment	40 - 200mm
Castor wheel tyre size	6.00 - 9 - 10
Power (min.)	60HP / 45kW
PTO speed	540 rpm
PTO type	with overrun clutch
Number of drive belts	4 x 'B' Section
Linkage	Cat. 2
Weight	1,753 lbs (795 kg)

Source: Teagle Super-ted 221 page.

Nothing matches those filters. Clear filters

Inside Teagle Tomahawks

• 

  01Many bale types

  The 8500 can process bales of cornstalks, straw, hay and silage, as well as clamp silage.

• 

  02Large crossbeater

  On the 8500, the large crossbeater has 54 blades that break the bale apart before the fan spreads it.

• 

  03Dual Chop

  The 8555 offers three modes with a removable screen and optional bypass frame: Short Chop, Shred and Distribute.

• 

  04Twin crossbeaters

  The 9500 and 1010 use twin crossbeaters for an even output of clamp and chopped bale silage, and round or rectangular baled straw.

• 

  05Synchro control

  On the 8200 and 8250 series, Synchro starts and stops spreading at the touch of a button, with one control for feed rate.

• 

  06Double powder coat paint

  All Teagle products are now treated with a double powder coat paint finish.

Options

Teagle offers many factory options. Fit varies by model, so ask us which ones suit your tractor or loader.

Also available

• Hydroshield dust suppression

  Onboard water tank with 5 high pressure spray nozzles. The maker says it reduces respirable dust by up to 40%.

  8200, 8250, 8500, 8555, 9500, 1010

• Ski Jump Chute

  Adjustable comb and extended beak with hydraulic angle adjustment, for bedding pig arcs and mulching fruit trees.

  6200, 8200, 8250, 8500, 8555, 9500, 1010

• Side chute

  Delivers to the right-hand side only, with a lower discharge height and slightly more blow distance than the swivel chute.

  8500, 9500, 1010

• Tailgate extension

  Adds capacity and makes loading easier. Attaches to a standard tailgate.

  8500, 8555, 9500

• Wide-angle PTO

  Recommended for continuous operation when turning corners.

  8200T, 8250T, 8500, 8555, 9500, 1010

• Central lubrication

  Automatic chain oiling for the crossbeater drive, recommended for high-use operations.

  8200, 8500, 9500, 1010

• Bale clamp and side extensions

  Hydraulic clamp lifts and lowers from the in-cab Wi-Fi control box. Side extensions add capacity to the compact machine.

  6100H

• Loader and tractor brackets

  Brackets for most skid steer, telehandler and pivot steer models, and tractor brackets for Category II and III linkages.

  6100H, 6200H

• Road lighting kit

  Rear markers for highway use when the tractor three-point hitch bracket is specified.

  6200H, 6200P

• Radio remote control

  Triggers mulching remotely while you use the hose.

  505M, 5050, 505FSM

• Dust suppression kit

  Liquid spray kit that reduces dust from milled straw or applies anti-bacterial products to bedding.

  500 range drum machines

• Booster fan

  An 11kW booster fan can transfer processed material up to 200 feet.

  500E

• Grain Milling hopper

  Fits into the bale chamber, with fine screens, to turn the C120 into a high capacity grain mill.

  C120

• Band spreading kit

  Spreads fertilizer in specific rows to either side of the spreader, for orchards and fruit trees.

  XT24, XT48

• Hopper cover

  Fits all standard XT hoppers.

  XT24, XT48