(315) 853-6151
Sweepster QCSS angle broom on a Volvo skid steer sweeping snow off a paved drive in the woods

Sweepster Sweeper and Broom Dealer in Central New York

Sweepster, a Paladin Attachments brand, builds angle brooms and pick-up sweepers for skid steers, tractors, loaders, trucks and turf mowers. Clinton Tractor in Clinton, NY is a Sweepster dealer for sweepers and parts.

Call (315) 853-6151 Compare models

Skid steer sweepers

Angle and collector sweepers that run from skid steer loader hydraulics. The SB hopper broom sweeps into a bucket; the VRS adds a high dump and 22% more bucket capacity, and the VS adds waterless dust abatement.

Loader and truck sweepers

Angle and collector sweepers for tractor loaders, backhoes, telehandlers, wheel loaders and trucks. On the CS and VCS the hopper sits in front, and reversing the flow tips it for a high dump.

Compact and utility tractor brooms

Front, loader and three-point angle brooms for compact and utility tractors, driven from the PTO or the tractor hydraulics. Paladin lists them for cleanup, snow removal and pavement work.

Turf mower and light-duty brooms

Front angle brooms for commercial turf mowers that lift on the mower lift, plus the 226 Series light angle broom. Paladin lists them for dethatching lawns, snow removal and cleaning sidewalks.

About Sweepster

Paladin says Sweepster has been tackling tough job sites and conditions since 1945. It builds sweeper and broom attachments for construction, landscaping and snow removal work.

Paladin Attachments, based in Dexter, Michigan, lists Sweepster among its brands, alongside Bradco, FFC and Harley. Paladin says it offers a sweeper for every prime mover, from turf mowers and compact tractors to skid steers, wheel loaders and trucks.

  1. 1945Paladin says Sweepster has been tackling tough job sites and conditions since this year.

Compare Sweepster sweepers

Search all 18 Sweepster sweepers by machine, name or feature.

Showing all 18 models

Sweepster QCSS angle broom on a Caterpillar skid steer, angled across a parking lot

Sweepster skid steer sweeper

Sweepster QCSS angle broom

Skid steer angle broom for windrowing material left, right or straight.

60–96 insweeping width
32 inbrush diameter
10–36gpm flow range
  • Angles manually 30 degrees left or right
  • Brush core reverses for even brush wear
  • Drive slips out of the core without removing hydraulic lines
  • Single or dual motor models
  • Poly, wire or poly/wire brush
  • Skid steer mounting included
Full specifications
Sweeping width (in.)60.0 / 72.0 / 84.0 / 96.0
Sweeping width @ 30° (in.)52.0 / 62.4 / 72.8 / 83.2
Brush diameter (in.)32
Overall height (in.)33.5
Overall width @ 0° (in.)74.8 / 86.8 / 98.8 / 110.8
Weight (lbs)793 / 831 / 852 / 890 / 915 / 953 / 1020
Flow range (gpm)10 – 18 / 12 – 25 / 20 – 36
Number of motors1 / 2
Maximum pressure (psi)3500 / 3000
Maximum articulation (degrees)30

Source: Paladin Sweepster QCSS Angle Broom page (single and dual motor tables).

Sweepster SB hopper broom on a John Deere compact track loader sweeping a paved lot

Sweepster skid steer sweeper

Sweepster SB Hopper Broom 215 Series

Hydraulic-drive collection sweeper for construction, municipal and industrial cleanup.

60–84 insweeping width
26 inbrush diameter
10–25gpm flow required
  • Heavy-duty cutting edge
  • Enhanced front bumper guard
  • Narrower overall width for tight spaces
  • Brush head reverses for "dust panning" debris
  • Direct-drive motor from loader hydraulics
  • Quick change core
Full specifications
Sweeping width (in.)60 / 72 / 84
Brush diameter (in.)26
Overall height (in.)29.7
Overall width (in.)72.3 / 84.3 / 96.3
Overall length (in.)61
Weight (lbs)943 / 1068 / 1190
Flow range (gpm)10 – 18 (18.7 CID motor) / 15 – 25 (24.7 CID motor)
Maximum pressure (psi)3500

Source: Paladin Sweepster SB Hopper Broom 215 Series page.

Sweepster VRS pick-up broom on a Caterpillar skid steer on a paved lot

Sweepster skid steer sweeper

Sweepster VRS pick-up broom

High-dump pick-up sweeper for parking lots, streets, curbs, gutters and milling jobs.

60–84 insweeping width
12–25gpm flow range
22%more bucket capacity (Volumizer bar)
  • "Volumizing" feature: bucket holds more debris with less recirculation
  • High dump design holds the sweeper head clear of the bucket
  • Hydraulic motor removes for brush change without tools
  • Quick-change brush without breaking hydraulic lines
  • Dust abatement capability
Full specifications
Sweeping width (in.)60 / 72 / 84
Overall height (in.)31.7
Overall width (in.)78.5 / 90.5 / 102.5
Overall length (in.)72.5
Weight (lbs)1150 / 1275 / 1400
Flow range (gpm)12 – 25
Maximum pressure (psi)3000

Source: Paladin Sweepster Pick Up Broom With Dust Abatement Capability (VRS) page.

Sweepster VS vacuum collector broom with its dust abatement unit on a Caterpillar skid steer

Sweepster skid steer sweeper

Sweepster VS vacuum collector broom

Skid steer pick-up sweeper with patented waterless dust abatement.

15–21 cu. ft.hopper capacity
60–84 insweeping width
15–25gpm flow range
  • Waterless dust control, no sprinkler system
  • Washable PTFE-coated filter works wet or dry
  • Patented "volumizing" feature
  • High dump design
  • Quick-change brush without breaking hydraulic lines
Full specifications
Sweeping width (in.)60 / 72 / 84
Sweeping width w/ optional gutter brush (in.)72 / 84 / 96
Hopper capacity (cu. ft.)15 / 18 / 21
Overall height (in.)30
Overall width (in.)73 / 85 / 97
Overall length (in.)69
Weight (lbs)1446 / 1562 / 1678
Flow range (gpm)15 – 25
PSI range2,000 – 3,500
Dust abatement attachment weight (lbs)235

Source: Paladin Sweepster Vacuum Collector Pick-Up Broom (VS) page.

Sweepster QCTL angle broom on a loader, angled on a paved road beside a grass bank

Sweepster loader sweeper

Sweepster QCTL angle broom

Angle broom for tractor loaders, backhoes, telehandlers and wheel loaders.

60–96 insweeping width
32 inbrush diameter
10–36gpm flow range
  • Manual or hydraulic angle
  • Angles manually 30 degrees left or right
  • Brush core reverses for even brush wear
  • Faceted hood for strength at the ends
  • Poly, wire or poly/wire brush
Full specifications
Sweeping width (in.)60 / 72 / 84 / 96
Sweeping width @ 30° (in.)54 / 64 / 75 / 85
Brush diameter (in.)32
Number of motorsSingle / Dual
Weight (lbs)793 / 829 / 852 / 890 / 915 / 953 / 982 / 1,022
Flow range (gpm)10 – 18 / 12 – 25 / 18 – 36

Source: Paladin Sweepster QCTL Angle Broom page.

Sweepster CS collector broom on a wheel loader sweeping a paved road

Sweepster loader sweeper

Sweepster CS high dump collector broom

Front-hopper collector sweeper for utility tractor and compact wheel loaders.

72–108 insweeping width
.40–1.02 yd³hopper capacity
15–50gpm flow required
  • Hydraulic dump to full loader lift height
  • Hopper positioned in front
  • Floating suspension
  • 26 in or 32 in brush
  • Quick attach and pin-on mounts available
Full specifications
Sweeping width (in.)72.0 / 84.0 / 96.0 / 108.0
Brush diameter (in.)26.0 / 32.0
Hopper capacity (yd³).40 / .53 / .61 / .91 / 1.02
Overall width (in.)93.0 / 105.0 / 117.0 / 129.0
Overall length, without quick coupler (in.)75.25 / 80.25
Weight (lbs)1080 / 1260 / 1440 / 1705 / 1918
Flow range (gpm)15-50

Source: Sweepster Sweepers Catalog (Paladin), CS specifications, page 11.

Sweepster VCS collector broom with dust abatement on a Caterpillar wheel loader

Sweepster loader sweeper

Sweepster VCS collector broom with dust abatement

Loader collector sweeper with a vacuum dust system and a heavy-duty dump bucket.

72–108 insweeping width
0.4–1.02 yd³hopper capacity
15–50gpm flow range
  • Vacuum dust suppression, no water system needed
  • High dump to the height of the loader lift
  • Casters and parallel arm mounting follow the ground
  • 26 in or 32 in brush with quick-change core
  • Quick-attach and direct pin-on options
Full specifications
Sweeping width (in.)72 / 84 / 96 / 108
Brush diameter (in.)26 / 32
Hopper capacity (yd³)0.4 / 0.53 / 0.61 / 0.91 / 1.02
Overall width (in.)93 / 105 / 117 / 129
Weight (lbs)1300 / 1330 / 1480 / 1510 / 1660 / 1690 / 1925 / 2260
Flow range (gpm)15 – 25 / 26 – 50
PSI range2000 – 3500

Source: Paladin Sweepster VCS Collector Sweeper With Dust Abatement page.

Sweepster LA angle broom with caster wheels on a Caterpillar backhoe loader

Sweepster loader sweeper

Sweepster LA truck and wheel loader angle broom

Angle broom for large wheel loaders, trucks or tractors, in 8- or 9-foot widths.

96 / 108 insweeping width
32 inbristles
18–36gpm, dual motor
  • Parallel linkage with casters follows ground contours
  • Hydraulic motors mounted inside the brush frame
  • Manual angle 30 degrees left/right standard
  • Third valve required; fourth for hydraulic angle
  • Poly, wire or poly/wire brush
Full specifications
Sweeping width (in.)96 / 108
Sweeping width @ 30° (in.)83.2 / 93.6
Overall height (in.)43.7
Overall length (in.)87.6
Weight, manual angle, single motor (lbs)1375 / 1425
Weight, manual angle, dual motor (lbs)1400 / 1450
Flow range, single 25 CID motor (gpm)15 - 25
Flow range, dual 17 CID motor (gpm)18 - 36
Maximum pressure (psi)3000 (single 25 CID) / 3500 (dual 17 CID)

Source: Paladin Sweepster Truck and Wheel Loader Angle Broom (LA) page.

Sweepster WLA angle broom on a John Deere 544 wheel loader sweeping pavement

Sweepster loader sweeper

Sweepster WLA wheel loader angle broom

Dual-motor angle broom for large wheel loaders up to 5 yards capacity.

120 / 144 insweeping width
36 inbrush diameter
12–60gpm flow range
  • Dual-motor design for high torque
  • Parallel linkage follows ground contours
  • Quick-change brush without breaking hydraulic lines
  • Manual angle 30 degrees left/right standard
  • Poly, wire or poly/wire brush
Full specifications
Sweeping width (in.)120 / 144
Sweeping width @ 30° (in.)104 / 129
Brush diameter (in.)36
Overall height (in.)53.2
Overall width @ 0° (in.)147.7 / 167.7
Weight (lbs)2240 / 2365
Flow range (gpm)12 – 30 / 18 – 45 / 24 – 60
Maximum pressure (psi)3000
Maximum articulation (degrees)30

Source: Paladin Sweepster Wheel Loader Angle Broom (WLA) page.

Sweepster MRHL angle broom on the loader of a red Massey Ferguson compact tractor

Sweepster tractor broom

Sweepster MRHL loader angle broom

The MRH sweeper on a compact tractor loader quick-attach, for easy hookup and removal.

48–72 insweeping width
26 inbrush diameter
8–15gpm flow range
  • Runs from the loader hydraulics
  • Optional three-point hydraulic system
  • Angles manually 30 degrees left or right
  • Brush drive slips out without removing hydraulic lines
Full specifications
Sweeping width (in.)48 / 60 / 72
Sweeping path at 30° (in.)41.5 / 52 / 60.5
Brush diameter (in.)26
Weight (lbs)380 / 440 / 500
Flow range (gpm)8 - 15
PSI1200 - 2500

Source: Paladin Sweepster MRHL Compact Tractor Loader Angle Broom page.

Sweepster MRH angle broom on the front of a John Deere compact tractor with a cab

Sweepster tractor broom

Sweepster MRH compact tractor angle broom

Hydraulic-drive front broom that mounts to the compact tractor frame.

6 ftstandard brush
15–25HP required
700 lbsshipping weight
  • Angles manually 30 degrees left or right
  • Hydraulic angle kit available
  • Pump powered from the mid or rear PTO
  • Brush widths of 4, 5 and 6 ft
Full specifications
Mounting locationFront
DriveHydraulic
Brush width standard6 ft
Sweeping path at 30° (in.)64
Brush diameter (in.)24
Manual angle changeStandard
Hydraulic angle changeOptional
PTO requiredMid Or Rear
Brush liftHydraulic
Hydraulics suppliedYes
HP required15 - 25
GearboxNone
Weight (lbs)700

Source: Paladin Sweepster Compact Tractor Angle Broom (MRH) page.

Sweepster RMRM rear-mount angle broom on the three-point hitch of a red compact tractor

Sweepster tractor broom

Sweepster RMRM three-point angle broom

Rear three-point (Cat 1) broom driven from the 540 PTO, for compact tractors.

5 ftstandard brush
24 inbrush diameter
425 lbsshipping weight
  • Steel hood, chain shield, height chains and pins included
  • T-shaft gearbox reverses brush rotation
  • Angles manually 30 degrees left or right
  • Driven from rear 540 PTO
Full specifications
Mounting locationRear
DriveChain
Brush width standard5 ft
Sweeping path at 30° (in.)52
Brush diameter (in.)24
Manual angle changeStandard
Hydraulic angle changeOptional
PTO requiredRear 540
Brush liftRear 3 Pt.
Hydraulics suppliedN/A
HP required15 to 25
Gearbox1 to 1
Weight (lbs)425

Source: Paladin Sweepster Compact Tractor Angle Broom (RMRM) page.

Sweepster AH/CH angle broom on the front of a John Deere utility tractor

Sweepster tractor broom

Sweepster AH / CH utility tractor angle broom

Front-mount PTO-to-hydraulic broom; AH has one motor, CH has two.

60–108 inwidth
32 inbrush diameter
Frontmount
  • Runs on tractor hydraulics or an optional pump package
  • Brush core reverses for even brush wear
  • Angles manually 30 degrees left/right
  • AH sweeps 5 to 7 ft; CH sweeps 5 to 8 ft
Full specifications
Width (in.)60 / 72 / 84 / 96 / 108
Brush diameter (in.)32
Weight (lbs)1090 / 1150 / 1210 / 1270
GPM range (DM18)20 – 36
PSI range (DM18)2000 – 3500
GPM range (SM18)10 – 18
PSI range (SM18)2000 – 3500
GPM range (SM28)12 – 25
PSI range (SM28)2000 – 3000

Source: Paladin Sweepster Utility Tractor Angle Broom, PTO to Hydraulic Drive page.

Sweepster RLH rear-mount angle broom with three-point frame, studio view

Sweepster tractor broom

Sweepster RLH rear-mount angle broom

Hydraulic three-point broom for Cat 1 and 2 tractors, with an optional 540 PTO pump.

60–108 inwidth
32 inbrush diameter
Cat 1 and 2three-point
  • Runs off the tractor hydraulics
  • Optional 540 PTO pump package
  • Brush core reverses for even brush wear
  • Angles manually 30 degrees left/right
Full specifications
Width (in.)60 / 72 / 84 / 96 / 108
Brush diameter (in.)32
Weight (lbs)1090 / 1150 / 1210 / 1270
GPM range (DM18)20 – 36
PSI range (DM18)2000 – 3500
GPM range (SM18)10 – 18
PSI range (SM18)2000 – 3500
GPM range (SM28)12 – 25
PSI range (SM28)2000 – 3000

Source: Paladin Sweepster Rear-Mount Angle Broom (RLH) page.

Sweepster RHFA rear-mount angle broom with three-point hitch frame, studio view

Sweepster tractor broom

Sweepster RHFA rear-mount angle broom

Three-point (Cat 1 and 2) broom driven from the 540 PTO, for 35–80 HP tractors.

35–80tractor HP
32 inbrush diameter
850 lbsweight
  • Steel hood, chain shield, height chains and pins included
  • T-shaft gearbox reverses brush rotation
  • Angles manually 30 degrees left or right
  • Driven from rear 540 PTO
Full specifications
Width (in.)72
Sweeping path at 30° (in.)64
Brush diameter (in.)32
Weight (lbs)850

Source: Paladin Sweepster Utility Tractor Rear-Mount Angle Broom (RHFA) page.

Sweepster CTM angle broom kicking up dust as it sweeps pavement, close-up of the brush and hood

Sweepster mower broom

Sweepster CTM turf mower angle broom

Chain-drive front broom that turns a commercial turf mower into an off-season snow tool.

15–30HP required
5 ftstandard brush
550 lbsshipping weight
  • Chain drive from the front PTO
  • Uses the mower lift
  • Angles manually 30 degrees left or right
  • Hydraulic angle kit available
Full specifications
Mounting locationFront
DriveChain
Brush width standard (ft)5
Sweeping path at 30° (in.)52
Brush diameter (in.)24
Manual angle changeStandard
Hydraulic angle changeOptional
PTO requiredFront
Brush liftMower Lift
Hydraulics suppliedN/A
HP required15 - 30
Gearbox3 to 1
Weight (lbs)550

Source: Paladin Sweepster Commercial Turf Mower Angle Broom (CTM) page.

Sweepster CTH angle broom on a red cab turf mower on a paved lot

Sweepster mower broom

Sweepster CTH turf mower angle broom

Hydraulic-drive front broom for commercial turf mowers, for snow and cleanup.

15–30HP required
5 ftstandard brush
600 lbsshipping weight
  • Hydraulic drive, hydraulics supplied
  • Uses the mower lift
  • Angles manually 30 degrees left or right
  • Brush widths of 4, 5 and 6 ft
Full specifications
Mounting locationFront
DriveHydraulic
Brush width standard (ft)5
Sweeping path at 30° (in.)52
Brush diameter (in.)24
Manual angle changeStandard
Hydraulic angle changeOptional
PTO requiredFront
Brush liftMower Lift
Hydraulics suppliedYes
HP required15 - 30
GearboxNone
Weight (lbs)600

Source: Paladin Sweepster Commercial Turf Mower Angle Broom, Hydraulic Drive (CTH) page.

Sweepster 226 Series angle broom on a small red loader, sweeping a paved surface

Sweepster mower broom

Sweepster 226 Series angle broom

Light angle broom for dethatching lawns, snow removal, sidewalks and general cleanup.

42 / 48 / 60 inwidths
26 inbrush heads
4–12gpm required
  • Quick change core
  • Polypropylene or poly-wire brushes
  • Dethatching lawns, snow removal, sidewalks
Full specifications
Sweeping width (in.)42 / 48 / 60
Sweeping path at 30° (in.)36.3 / 41.5 / 52
Brush diameter (in.)26
Overall height (in.)28.3
Overall width (in.)55.6 / 61.6 / 73.6
Overall length (in.)52.8
Required flow (gpm)4 - 8 / 6 - 12
Bristle materialPoly / Poly-Wire Mix
MountCII

Source: Paladin Sweepster Angle Broom 226 Series page.

Skid steer sweepers at a glance

ModelQCSS angle broomSB Hopper Broom 215 SeriesVRS pick-up broomVS vacuum collector broom
Sweeping width (in.)60.0 / 72.0 / 84.0 / 96.060 / 72 / 8460 / 72 / 8460 / 72 / 84
Overall width (in.)–72.3 / 84.3 / 96.378.5 / 90.5 / 102.573 / 85 / 97
Weight (lbs)793 / 831 / 852 / 890 / 915 / 953 / 1020943 / 1068 / 11901150 / 1275 / 14001446 / 1562 / 1678
Flow range (gpm)10 – 18 / 12 – 25 / 20 – 3610 – 18 (18.7 CID motor) / 15 – 25 (24.7 CID motor)12 – 2515 – 25
Overall height (in.)33.529.731.730

Loader and truck sweepers at a glance

ModelQCTL angle broomCS high dump collector broomVCS collector broom with dust abatementLA truck and wheel loader angle broomWLA wheel loader angle broom
Sweeping width (in.)60 / 72 / 84 / 9672.0 / 84.0 / 96.0 / 108.072 / 84 / 96 / 10896 / 108120 / 144
Brush diameter (in.)3226.0 / 32.026 / 32–36
Sweeping width @ 30° (in.)54 / 64 / 75 / 85––83.2 / 93.6104 / 129
Weight (lbs)793 / 829 / 852 / 890 / 915 / 953 / 982 / 1,0221080 / 1260 / 1440 / 1705 / 19181300 / 1330 / 1480 / 1510 / 1660 / 1690 / 1925 / 2260–2240 / 2365
Flow range (gpm)10 – 18 / 12 – 25 / 18 – 3615-5015 – 25 / 26 – 50–12 – 30 / 18 – 45 / 24 – 60

Compact and utility tractor brooms at a glance

ModelMRHL loader angle broomMRH compact tractor angle broomRMRM three-point angle broomAH / CH utility tractor angle broomRLH rear-mount angle broomRHFA rear-mount angle broom
Brush diameter (in.)262424323232
Sweeping path at 30° (in.)41.5 / 52 / 60.56452––64
Width (in.)–––60 / 72 / 84 / 96 / 10860 / 72 / 84 / 96 / 10872
Weight (lbs)380 / 440 / 5007004251090 / 1150 / 1210 / 12701090 / 1150 / 1210 / 1270850
HP required–15 - 2515 to 25–––

Turf mower and light-duty brooms at a glance

ModelCTM turf mower angle broomCTH turf mower angle broom226 Series angle broom
Brush diameter (in.)242426
Sweeping path at 30° (in.)525236.3 / 41.5 / 52
HP required15 - 3015 - 30–
Weight (lbs)550600–

Sweepster brushes and parts

Paladin points Sweepster owners to Documoto, its online parts library, and posts an operator manual on each sweeper page. Sweepster supplies replacement brush sections and sets, gutter brushes, skirting and dust abatement filters. Bring the sweeper model and width to the Clinton parts counter and we will look up the Sweepster part.

  • Replacement brush sections
  • Brush sets
  • Gutter brushes
  • Sweeper skirting
  • Dust abatement air filters
Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

Built into Sweepster sweepers

One-year warranty

The Epiroc Industrial Tools & Attachments 2026 warranty policy lists Sweepster under its one-year warranty period. Broom brushes count as normal wear parts.

Warranty terms from the Epiroc 2026 policy

The policy applies to Epiroc Industrial Tools & Attachments and its brands, including Paladin and Sweepster.

It puts Sweepster in its one-year warranty group, with Bradco, FFC, Harley, McMillen, Paladin and others.

Not covered: normal wearing parts that contact the working material, such as bearings, teeth, blade cutting edges and broom brushes.

Once the warranty period has begun it cannot be stopped or interrupted for any reason, and all warranties are nontransferrable.

Options

Paladin lists these options for the Sweepster line. Which ones fit depends on the sweeper.

Also available

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday
Get directions(315) 853-6151

Driving distance

  • New Hartford 6 mi
  • Utica 9 mi
  • Rome 14 mi
  • Oneida 17 mi
  • Hamilton 20 mi
  • Herkimer 26 mi
  • Cazenovia 31 mi
  • Norwich 42 mi
  • Cooperstown 47 mi
  • Syracuse 49 mi
  • Oneonta 60 mi
  • Cortland 61 mi

Before you visit

Can I see Sweepster sweepers in person?

Call (315) 853-6151 before you drive over and ask which Sweepster sweepers we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.