
SunFire radiant heater
SunFire SF80
Built to lift, roll and carry to a shop, garage or job site.
- Diesel, kerosene or #2 fuel oil
- 6 gallon tank, up to 10 hour run time
- Only 19.75 in. wide, fits through any door
- Wired for an optional wall thermostat
- Rapid access hatch to the nozzle assembly
Full specifications
| Heat output (BTU/hr) | 80,000 |
|---|---|
| Heats up to (sq ft) | 1,900 |
| Fuel | Diesel, kerosene, #2 fuel oil |
| Tank (gal.) | 6 |
| Run time | Approx. 10 hrs |
| Flow rate (GPH) | .58 diesel or #2 fuel oil / .56 kerosene |
| Dimensions (in.) | L 30 x W 18.1 x H 28.1 |
| Dry weight (lb) | 85 |
| Wet weight, full tank (lb) | 127 |
| Electrical | 0.5A, 120V / 60Hz 1-phase |
| Thermostat | Wall thermostat connection ready, thermostat not included |
| Clearance to combustibles (in.) | Front 84, sides 36 |
| Warranty | 2-year bumper to bumper limited warranty |
| Certification | ETL Safety Certification (US and Canada) |
| Where made | Janesville, WI, USA |
| Use | Not for indoor use in a household residence; proper ventilation required |
Source: SunFire SF80 product page.










