SnowEx Snowplow and Spreader Dealer in Central New York

Name: Clinton Tractor & Implement Co.
Address: 31 Meadow St, Clinton, NY, 13323, US
Telephone: (315) 853-6151

SnowEx, a Douglas Dynamics brand from Madison Heights, Michigan, builds salt spreaders, liquid sprayers and snowplows for trucks, UTVs and tractors. Clinton Tractor in Clinton, NY is a SnowEx dealer for spreaders, snowplows and genuine SnowEx parts.

Call (315) 853-6151 Compare models

31 Meadow St, Clinton, NY 13323
Mon–Fri 7–5, Sat 7–12
(315) 853-6151

Tailgate spreaders

SnowEx tailgate spreaders hang from a receiver hitch or mount on trucks, UTVs, skid-steers and tractors. Most have corrosion-proof poly hoppers, from 3.0 cu ft bagged-salt units to the V-Maxx that turns a dump body into a spreader.

SnowEx Utility3.0-3.25 cu ft · 240-260 lb capacity · Up to 25' spread width
SnowEx Wireless Utility3.0 cu ft · 240 lb capacity · Up to 25' spread width
SnowEx Tailgate Pro5.75-10.75 cu ft · 460-860 lb capacity · Up to 40' spread width
SnowEx Bulk Pro5.25-9.0 cu ft · 420-720 lb capacity · Up to 40' spread width
SnowEx Precision Pro6.0 cu ft · 480 lb capacity · 4' to 12' spread width
SnowEx V-Maxx SP-2400Up to 40' spread width · 326 lb empty · 5" steel auger

Hopper spreaders

Hopper spreaders sit in the bed of a UTV, pickup or dump truck and carry bulk salt and sand. SnowEx builds them in poly and stainless steel, from 11 cu ft UTV units to 5.0 cu yd fleet spreaders.

SnowEx V-Pro UTV 3220011.0 cu ft · 880 lb capacity · Up to 30' spread width
SnowEx V-Pro 32300 & 326000.5-1.0 cu yd · 1,080-2,160 lb capacity · Up to 40' spread width
SnowEx Renegade Compact0.35-0.7 cu yd · 750-1,500 lb capacity · Up to 36' salt spread width
SnowEx Renegade Poly1.5-2.2 cu yd · 3,240-4,752 lb capacity · Up to 36' salt spread width
SnowEx Renegade1.5-5.0 cu yd · Up to 10,800 lb capacity · 16" spinner
SnowEx HELIXX Poly1.5-5.0 cu yd · 3,120-10,400 lb capacity · 8 - 40 ft spread width

Drop and walk-behind spreaders

For sidewalks, entryways and paths, SnowEx drop spreaders put salt straight down so it stays off grass and landscaping. The walk-behind line adds push spreaders and a liquid sprayer for stairs and curbs.

SnowEx Drop Pro 6006.0 cu ft · 480 lb capacity · 36" drop width
SnowEx Drop Pro 140014.0 cu ft · 1,120 lb capacity · 48" drop width
SnowEx Drop Pro 250 & 600 Stainless2.5-6.0 cu ft · 350-650 lb capacity · 30 to 36" drop width
SnowEx Walk-Behind Broadcast Spreaders1.5-2.0 cu ft · 100-160 lb capacity · Up to 20' spread width
SnowEx Walk-Behind Drop Spreaders1.5 cu ft · 28" drop width · 55 lb empty
SnowEx Walk-Behind Liquid Sprayer12 gal · Up to 48" spray width · 1 gpm

Truck snowplows

SnowEx truck plows run from 6'8" straight blades for Jeeps to 11-foot wing plows for Class 2-6 trucks. Every truck plow has the Automatixx attachment system and Scrape Maxx down-force as standard.

SnowEx Light Truck6'8"-7'2" blade width · 306-313 lbs · 23.5" blade height
SnowEx Regular-Duty7'6"-8'0" blade width · 415-425 lbs · 27" blade height
SnowEx Heavy-Duty7'6"-9'0" blade width · 730-781.5 lbs · 2'7" blade height
SnowEx RDV7'6" blade width · 493-539 lbs · V / scoop / straight positions
SnowEx HDV8'6"-9'6" blade width · 950-1,020 lbs · Class 2-6 trucks
SnowEx SPEEDWING8'7"-9'8" blade width · 891.5 lbs · Up to 30% more snow in scoop
SnowEx POWER PLOW8'-11' blade width · 970-1,036 lbs · Up to 30% more snow in scoop

UTV and compact tractor snowplows

SnowEx UTV plows turn a utility vehicle or sub-compact tractor into a sidewalk and driveway plow. Choose a mid-duty straight blade, a heavy-duty straight blade or a 6-foot V-plow.

SnowEx Mid-Duty UTV5'6"-6'0" blade width · 170-195 lbs · Hydraulic or winch lift
SnowEx Heavy-Duty UTV Straight Blade6'0" blade width · 261 lbs · 5'4" plowing width
SnowEx Heavy-Duty UTV V-Plow6'0" blade width · 355 lbs · V / scoop / straight positions

SnowEx history: from salt spreaders to a full line

SnowEx has built snow and ice control products since 1997 and is headquartered in Madison Heights, Michigan. It offers salt and sand spreaders and liquid brine sprayers, and in 2015 the line grew to include a full range of commercial snowplows. Its site shows how the poly spreader hoppers are rotomolded.

SnowEx is a Douglas Dynamics brand, and its warranty and registration page also covers SweepEx and TurfEx products. The maker says it designs its gear for maximum uptime and minimal maintenance, and Douglas Dynamics has been innovating products for more than 75 years.

1997SnowEx begins building snow and ice control products.
2015The product line expands to a full line of commercial snowplows.

Compare SnowEx snowplows and spreaders

Search all 28 SnowEx spreaders, sprayers and snowplows by line, name or feature.

Showing all 28 models

SnowEx tailgate spreader

SnowEx Utility

Poly tailgate spreaders for compact trucks, UTVs and tractors, with spread widths up to 25 feet.

3.0-3.25cu ft

240-260lb capacity

Up to 25'spread width

Lightweight, corrosion-resistant polyethylene hopper
Electric or manual feed for fine materials, or a 3-inch vertical auger for bagged salt
Electric spinner motor in a sealed drive enclosure
Variable speed control in the cab comes with the SP-100-1 and SP-325
Standard 2-inch receiver hitch mount

Full specifications

Models	SP-100-1, SP-125-1, SP-225-1, SP-325
Capacity (volume)	3.0 cu ft / 3.25 cu ft
Capacity (weight)	240 lb / 260 lb
Spreading width	Up to 20' / Up to 25'
Approx. weight (empty)	75 lb / 65 lb / 68 lb / 79 lb
Overall dimensions (LxWxH)	22" x 30" x 30" / 22" x 30" x 32" / 18" x 33" x 33"
Vehicle compatibility	½, ¾, or 1-Ton Pickup Trucks, UTVs & Tractors
Material compatibility	Fine Materials / Bagged Salt
Feedgate	Electronically Controlled / Manual / N/A
Motors	Dual Electric, 12V, Sealed
Spinner	10"
Auger	N/A / 3" vertical high-flow auger

Source: SnowEx Utility spreader page.

SnowEx tailgate spreader

SnowEx Wireless Utility

Commercial salting with no strings attached: a 3.0 cu ft poly tailgate spreader run by wireless control.

3.0cu ft

240lb capacity

Up to 25'spread width

Wireless control, with no wiring harness to run
Plugs into the 7-pin trailer outlet on the hitch
3-inch vertical high-flow auger for bagged rock salt
Patented electric spinner motor in a sealed drive enclosure

Full specifications

Models	SR-210
Capacity (volume)	3.0 cu ft
Capacity (weight)	240 lb
Spreading width	Up to 25'
Approx. weight (empty)	68 lb
Overall dimensions (LxWxH)	22" x 30" x 32"
Hopper dimensions (LxW)	22" x 30"
Vehicle compatibility	½, ¾, or 1-Ton Pickup Trucks, UTVs & Tractors
Material compatibility	Bagged Salt
Wiring harness	7-pin plug-to-plug in trailer outlet on hitch, no harness required
Motors	Dual Electric, 12V, Sealed
Spinner	10"
Auger	3" vertical high-flow auger

Source: SnowEx Wireless Utility spreader page.

SnowEx tailgate spreader

SnowEx Tailgate Pro

5.75 and 10.75 cu ft poly tailgate spreaders that mount on trucks, skid-steers and tractors.

5.75-10.75cu ft

460-860lb capacity

Up to 40'spread width

Steel top screen breaks up clumps while loading
3-inch vertical high-flow auger
12-volt electric spinner drive in a patented sealed enclosure
FLEET FLEX electrical system lets Tailgate Pro units swap between trucks
Optional gate assembly kit for fine materials and vibrator kit for bulk salt

Full specifications

Models	SP-575X-1, SP-1075X-1
Capacity (volume)	5.75 cu ft / 10.75 cu ft
Capacity (weight)	460 lb / 860 lb
Spreading width	Up to 40'
Approx. weight (empty)	106 lb / 141 lb
Overall dimensions (LxWxH)	20.5" x 38" x 35" / 21" x 52" x 40"
Hopper dimensions (LxW)	20.5" x 38" / 21" x 47.5"
Vehicle compatibility	½, ¾, or 1-Ton Pickup Trucks, Dump Body or 15,000+ GVWR Truck, Skid-Steers & Tractors
Material compatibility	Bagged Salt / Ice Melt, Bulk Salt (vibrator kit required) & Fine Materials (gate assembly kit required)
Motors	Electric, 12V, Sealed
Spinner	10"
Auger	3" vertical high-flow auger

Source: SnowEx Tailgate Pro spreader page.

SnowEx tailgate spreader

SnowEx Bulk Pro

High-capacity 5.25 and 9.0 cu ft poly tailgate spreaders built for bulk salt.

5.25-9.0cu ft

420-720lb capacity

Up to 40'spread width

Horizontal auger with variable-pitch flighting for even bulk flow
Patented inverted V baffle with vibrator feeds the auger
12-volt electric auger transmission
FLEET FLEX electrical system for swapping between trucks
SP-1875-1 can add a 30-gallon liquid tank for pre-wet

Full specifications

Models	SP-1575-1, SP-1875-1
Capacity (volume)	5.25 cu ft / 9.0 cu ft
Capacity (weight)	420 lb / 720 lb
Spreading width	Up to 30' / Up to 40'
Approx. weight (empty)	160 lb / 180 lb
Overall dimensions (LxWxH)	20.5" x 38" x 34" / 24" x 52" x 36"
Hopper dimensions (LxW)	20.5" x 38" / 21" x 47"
Vehicle compatibility	½, ¾ or 1-Ton Pickup Trucks, UTVs & Tractors / ¾ or 1-Ton Pickup Trucks & Tractors
Material compatibility	SP-1575-1: Bagged Salt / Ice Melt, Bulk Salt, Fine Materials (needs Material Control Tube accessory). SP-1875-1: Bagged Salt / Ice Melt, Bulk Salt, Fine Materials (needs Material Control Tube accessory) & Pre-Wet (needs Pre-Wet System accessory)
Motors	Dual Electric, 12V, Sealed
Spinner	10" / 12"
Auger	Horizontal high-flow auger

Source: SnowEx Bulk Pro spreader page.

SnowEx tailgate spreader

SnowEx Precision Pro

A 6.0 cu ft poly tailgate spreader whose pattern adjusts on the fly from 4 to 12 feet wide.

6.0cu ft

480lb capacity

4' to 12'spread width

Spread pattern adjusts from four feet for tight areas up to 12 feet
Volumetric feed delivers material to the center of the spinner
Gateless system does not leak material between applications
Adjustable stainless steel spinner cups
Patented inverted V baffle with vibrator

Full specifications

Models	SP-1675
Capacity (volume)	6.0 cu ft
Capacity (weight)	480 lb
Spreading width	4' to 12'
Approx. weight (empty)	290 lb
Overall dimensions (LxWxH)	30" x 49.5" x 30"
Hopper dimensions (LxW)	20" x 48"
Vehicle compatibility	½, ¾ or 1-Ton Pickup Truck & Tractors
Material compatibility	Bagged Salt / Ice Melters & Fine Materials
Motors	Dual Electric, 12V, Sealed
Spinner	12"
Auger	Rotary vane

Source: SnowEx Precision Pro spreader page.

SnowEx tailgate spreader

SnowEx V-Maxx SP-2400

A poly tailgate-replacement spreader that turns a dump body into a bulk salt and sand spreader.

Up to 40'spread width

326lb empty

5"steel auger

Replaces the dump truck tailgate using existing attachment points
Direct drive auger transmission reduces material bridging
Attached vibrator keeps material flowing
Standard work light

Full specifications

Models	SP-2400
Capacity (volume)	Based on Size of Dump Body
Spreading width	Up to 40'
Approx. weight (empty)	326 lb
Overall dimensions (LxWxH)	14" x 84" x 24"
Hopper dimensions (LxW)	17" x 84"
Vehicle compatibility	Dump Body, Flatbed, or 15,000+ GVWR Truck
Material compatibility	Bulk Salt, 50/50 Salt/Sand Mix & Sand
Motors	Dual Electric, 12V, Sealed
Spinner	12"
Auger	5" heavy-duty variable pitch steel flighting

Source: SnowEx V-Maxx SP-2400 spreader page.

SnowEx hopper spreader

SnowEx V-Pro UTV 32200

An 11.0 cu ft hopper spreader sized for UTV beds and payloads.

11.0cu ft

880lb capacity

Up to 30'spread width

Built around the bed lengths and weight limits of most UTVs
Transverse auger with patented weather-tight motor transmission
Patented inverted V baffle with vibrator
Spinner assembly removes for access to the UTV hitch
Fitted tarp keeps material dry

Full specifications

Models	32200
Capacity (volume)	11.0 cu ft
Capacity (weight)	880 lb
Spreading width	Up to 30'
Approx. weight (empty)	280 lb
Overall dimensions (LxWxH)	64" x 48.5" x 27"
Hopper dimensions (LxW)	53" x 48.5"
Vehicle compatibility	UTVs
Material compatibility	Bulk Salt, Fine Materials (needs Material Control Tube accessory) & Pre-Wet (needs 30-Gallon Liquid Kit accessory)
Motors	Dual Electric, 12V, Sealed
Spinner	12"
Auger	3" transverse high-flow auger

Source: SnowEx V-Pro UTV 32200 page.

SnowEx hopper spreader

SnowEx V-Pro 32300 & 32600

0.5 and 1.0 cu yd poly hopper spreaders for pickups that need more than a tailgate unit.

0.5-1.0cu yd

1,080-2,160lb capacity

Up to 40'spread width

Much lighter on the pickup than a full-size hopper spreader, the maker says
Transverse auger with patented weather-tight motor transmission
Patented inverted V baffle with vibrator
Removable chute assembly for hitch access
Optional 30-gallon liquid kit for pre-wet

Full specifications

Models	32300, 32600
Capacity (volume)	0.5 cu yd / 1.0 cu yd
Capacity (weight)	1,080 lb / 2,160 lb
Spreading width	Up to 40'
Approx. weight (empty)	386 lb / 416 lb
Overall dimensions (LxWxH)	77" x 48.5" x 27" / 77" x 48.5" x 36"
Vehicle compatibility	½, ¾, or 1-Ton Pickup Truck / ¾ or 1-Ton Pickup Truck
Material compatibility	Bulk Salt, Fine Materials (needs Material Control Tube accessory) & Pre-Wet (needs 30-Gallon Liquid Kit accessory)
Motors	Dual Electric, 12V, Sealed
Spinner	12"
Auger	3" transverse high-flow auger

Source: SnowEx V-Pro 32300 & 32600 page.

SnowEx hopper spreader

SnowEx Renegade Compact

0.35 and 0.7 cu yd stainless steel hopper spreaders for UTVs and work trucks.

0.35-0.7cu yd

750-1,500lb capacity

Up to 36'salt spread width

16-gauge stainless steel hopper, riveted and bolted
Choice of pintle chain conveyor or HELIXX shaftless auger
Direct-drive spinner motor and IP-67 rated locking power plug
Accessories plug into a rear-mounted hub with no extra wiring

Full specifications

Models	S035C, S035A, S070C, S070A
Capacity (volume)	0.35 cu yd / 0.7 cu yd
Capacity (weight)	750 lb / 1,500 lb
Spreading width	Salt: Up to 36' / Sand: Up to 24'
Approx. weight (empty)	235 lb / 192 lb / 420 lb / 337 lb
Min. bed length	30" / 44"
Spinner	12" Diameter
Material delivery	Pintle Chain Conveyor / HELIXX Shaftless Auger
Hopper construction	16 Gauge Stainless Steel
Vehicle compatibility	UTVs / ½, ¾ or 1-Ton Pickup Truck

Source: SnowEx Renegade Compact page.

SnowEx hopper spreader

SnowEx Renegade Poly

1.5 and 2.2 cu yd poly hopper spreaders for commercial contractors.

1.5-2.2cu yd

3,240-4,752lb capacity

Up to 36'salt spread width

Corrosion-proof poly body with stainless steel drive line
Integrated lid system keeps bulk material dry
Choice of pintle chain conveyor or HELIXX shaftless auger
Hinged chute for routine maintenance access
Accessories plug into a rear-mounted hub with no extra wiring

Full specifications

Models	P150C, P150A, P220C, P220A
Capacity (volume)	1.5 cu yd / 2.2 cu yd
Capacity (weight)	3,240 lb / 4,752 lb
Spreading width	Salt: Up to 36' / Sand: Up to 24'
Approx. weight (empty)	723 lb / 673 lb / 823 lb / 793 lb
Rec. bed length	74" / 90"
Spinner	16" Diameter
Material delivery	Pintle Chain Conveyor / HELIXX Shaftless Auger
Hopper construction	Polyethylene Body, Stainless Steel Drive Line
Vehicle compatibility	¾ or 1-Ton Pickup, Dump Body, Flatbed, or 15,000+ GVWR Truck

Source: SnowEx Renegade Poly page.

SnowEx hopper spreader

SnowEx Renegade

Full-size stainless steel hopper spreaders from 1.5 to 5.0 cu yd for large commercial and municipal fleets.

1.5-5.0cu yd

Up to 10,800lb capacity

16"spinner

Riveted stainless steel hopper
Choice of pintle chain conveyor or HELIXX shaftless auger
Baffles keep the spread pattern consistent
Direct-drive spinner motor and IP-67 rated locking power plug
Accessory available for pre-wet and liquid brine

Full specifications

Models	S150C, S150A, S220C, S220A, S300C, S300A, S400C, S400A, S500C, S500A
Capacity (volume)	1.5 cu yd / 2.2 cu yd / 3.0 cu yd / 4.0 cu yd / 5.0 cu yd
Capacity (weight)	3,240 lb / 4,752 lb / 6,480 lb / 8,640 lb / 10,800 lb
Spreading width	Salt: Up to 36' / Sand: Up to 24'
Approx. weight (empty)	530 lb / 500 lb / 580 lb / 550 lb / 750 lb / 700 lb / 820 lb / 770 lb / 910 lb / 850 lb
Spinner	16" Diameter
Material delivery	Pintle Chain Conveyor / HELIXX Shaftless Auger
Hopper construction	Riveted Stainless Steel
Factory chute configuration	Short / Long
Vehicle compatibility	¾ or 1-Ton Pickup, Dump Body, Flatbed, or 15,000+ GVWR Truck / Dump Body, Flatbed, or 15,000+ GVWR Truck

Source: SnowEx Renegade page.

SnowEx hopper spreader

SnowEx HELIXX Poly

1.5 to 5.0 cu yd poly hopper spreaders with the patented HELIXX shaftless auger.

1.5-5.0cu yd

3,120-10,400lb capacity

8 - 40 ftspread width

Shaftless corkscrew auger runs the full length of the hopper
Cab-forward hopper for better payload distribution
Stainless steel frame
Optional Triple Threat kit to spread, pre-wet or spray brine

Full specifications

Models	11780, 11790, 11800, 11810
Capacity (volume)	1.5 cu yd / 2.25 cu yd / 3.5 cu yd / 5.0 cu yd
Capacity (weight)	3,120 lb / 4,680 lb / 7,280 lb / 10,400 lb
Spreading width	8 - 40 ft
Approx. weight (empty)	412 lb / 443 lb / 694 lb / 718 lb
Min. bed length	72" / 80" / 98"
Vehicle compatibility	3/4- & 1-Ton Pickup Trucks / Dump Body, Flatbed, or 15,000+ GVWR Truck
Material compatibility	Bulk Salt, Pre-Wet and Liquid Brine (pre-wet and liquid system sold separately)
Motors	Dual Electric, 12V, Sealed
Spinner	12"
HELIXX	6.25" heavy-duty shaftless auger variable pitch steel flighting
Brake light	Yes

Source: SnowEx HELIXX Poly page.

SnowEx sidewalk spreader

SnowEx Drop Pro 600

A 6.0 cu ft poly drop spreader for sidewalks and entryways, for UTVs and compact tractors.

6.0cu ft

480lb capacity

36"drop width

Drop pattern puts material where you want it and protects nearby areas
36-inch wide material opening
Gateless system does not leak between applications
Sealed auger drive and vibrating baffle

Full specifications

Models	SD-600-1
Capacity (volume)	6.0 cu ft
Capacity (weight)	480 lb
Spreading width	36"
Approx. weight (empty)	175 lb
Overall dimensions (LxWxH)	24" x 49.5" x 28"
Hopper dimensions (LxW)	20.25" x 48"
Vehicle compatibility	UTVs & Tractors
Material compatibility	Bagged Salt / Ice Melt, Fine Materials
Motors	Direct Drive, 12V, Sealed

Source: SnowEx Drop Pro 600 page.

SnowEx sidewalk spreader

SnowEx Drop Pro 1400

A 14.0 cu ft drop spreader for utility tractors on heavy sidewalk and pathway work.

14.0cu ft

1,120lb capacity

48"drop width

Drop pattern keeps salt off landscaping
Material distribution shaft vibrator for an even spread
Gateless system does not leak between applications
Standard 3-point mount

Full specifications

Models	SD-1400
Capacity (volume)	14.0 cu ft
Capacity (weight)	1,120 lb
Spreading width	48"
Approx. weight (empty)	375 lb
Overall dimensions (LxWxH)	30" x 60" x 38"
Hopper dimensions (LxW)	24.25" x 59.4"
Vehicle compatibility	Tractors
Material compatibility	Bagged Salt / Ice Melt, Fine Materials
Motors	Direct Drive, 12V, Sealed

Source: SnowEx Drop Pro 1400 page.

SnowEx sidewalk spreader

SnowEx Drop Pro 250 & 600 Stainless

Stainless steel drop spreaders that lay a 30 to 36 inch band on sidewalks and paths.

2.5-6.0cu ft

350-650lb capacity

30 to 36"drop width

Stainless steel hopper with oil-filled poly bearings
Adjustable baffles narrow the band from 36 to 30 inches
Top screen with hinged bag splitter for bagged salt
Trough drops open for fast clean-out
2-inch receiver, 3-point and in-bed mounts

Full specifications

Models	DPS-250, DPS-600
Capacity (volume)	2.5 cu ft / 6.0 cu ft
Capacity (weight)	350 lb / 650 lb
Spreading width	30 to 36"
Approx. weight (empty)	130 lb / 160 lb
Overall dimensions (LxWxH)	17" x 42" x 17.25" / 20" x 42" x 28"
Hopper dimensions (LxW)	12.8" x 36.5" / 16.75" x 36.5"
Vehicle compatibility	UTVs & Tractors
Material compatibility	Bagged Salt / Ice Melt, Fine Materials
Motors	Direct Drive, 12V, Sealed

Source: SnowEx Drop Pro 250 & 600 page.

SnowEx sidewalk spreader

SnowEx Walk-Behind Broadcast Spreaders

1.5 and 2.0 cu ft push spreaders for entryways and high-traffic walks.

1.5-2.0cu ft

100-160lb capacity

Up to 20'spread width

Single-slot port with an extra-wide throat for steady flow
Adjustable sidewalk deflectors standard on the SP-85 and SP-85SS
Clear poly cover and 10-gauge wire top screen
SP-85SS has a stainless steel frame

Full specifications

Models	SP-65, SP-85, SP-85SS
Capacity (volume)	1.5 cu ft / 2.0 cu ft
Capacity (weight)	100 lb / 160 lb
Spreading width	Up to 20'
Approx. weight (empty)	25 lb / 42 lb
Overall dimensions (LxWxH)	50" x 26" x 28" / 52" x 29" x 33"
Hopper dimensions (LxW)	18" x 23" / 20" x 23"
Spinner	10" molded plastic
Spinner drive	Nylatron® gear drive

Source: SnowEx Walk-Behind Broadcast Spreaders page.

SnowEx sidewalk spreader

SnowEx Walk-Behind Drop Spreaders

A 1.5 cu ft push spreader that lays material in a tight 28-inch band.

1.5cu ft

28"drop width

55lb empty

Drops material straight to the ground with no spinner
Clear poly cover lets the operator watch the material level
Standard top screen keeps out large chunks
SD-95SS has a stainless steel frame

Full specifications

Models	SD-95, SD-95SS
Capacity (volume)	1.5 cu ft
Spreading width	28"
Approx. weight (empty)	55 lb
Overall dimensions (LxWxH)	48" x 38.25" x 36"
Hopper dimensions (LxW)	13" x 30"

Source: SnowEx Walk-Behind Drop Spreaders page.

SnowEx sidewalk spreader

SnowEx Walk-Behind Liquid Sprayer

A 12-gallon battery-powered sprayer for pre-treating stairs, curbs and entryways.

12gal

Up to 48"spray width

1gpm

12-volt electric pump with a rechargeable battery
Heavy-duty spray wand reaches stairs and tight spots
Adjustable boomless nozzle sprays up to 48 inches wide

Full specifications

Models	SL-80, SL-80SS
Capacity (volume)	12 gal
Spraying width	Up to 48"
Spraying volume	1 gpm
Approx. weight (empty)	60 lb
Overall dimensions (LxWxH)	48" x 28" x 33"
Motors	12V, Direct-Drive Pump

Source: SnowEx Walk-Behind Liquid Sprayer page.

SnowEx truck snowplow

SnowEx Light Truck

Straight blade plows for Jeeps, SUVs and mid-size pickups.

6'8"-7'2"blade width

306-313lbs

23.5"blade height

16-gauge powder-coated steel moldboard
Full-trip moldboard with two coil springs
Six vertical ribs resist twisting
¼ x 5 inch steel cutting edge standard

Full specifications

Models	6800LT, 7200LT
Blade width	6'8" / 7'2"
Approx. weight	306 lbs / 313 lbs
Plowing width (straight)	6'8" / 7'2"
Plowing width (full angle)	5'11" / 6'4"
Blade height	23.5"
Cutting edge	¼" x 5" (Standard)
Blade thickness	16 ga
Blade type	Straight Blade
Moldboard	Powder Coated Steel
Vehicle compatibility	Jeeps & Mid-Size Pickups
Reinforcement ribs	6
Trip springs	2 steel

Source: SnowEx Light Truck plow page.

SnowEx truck snowplow

SnowEx Regular-Duty

Straight blade plows built for half-ton pickups and light commercial work.

7'6"-8'0"blade width

415-425lbs

27"blade height

14-gauge powder-coated steel moldboard
Full-trip moldboard with two coil springs
70-degree attack angle for a clean scrape
5/16 x 6 inch steel cutting edge standard

Full specifications

Models	7600RD, 8000RD
Blade width	7'6" / 8'0"
Approx. weight	415 lbs / 425 lbs
Plowing width (straight)	7'6" / 8'0"
Plowing width (full angle)	6'9" / 7'3"
Blade height	27"
Cutting edge	5/16" x 6" (Standard)
Blade thickness	14 ga
Blade type	Straight Blade
Moldboard	Powder-Coated Steel
Vehicle compatibility	Half-Ton & Class 2 Trucks
Reinforcement ribs	6
Trip springs	2 steel

Source: SnowEx Regular-Duty plow page.

SnowEx truck snowplow

SnowEx Heavy-Duty

Straight blade plows with a 31-inch moldboard for larger trucks and 3-4 series tractors.

7'6"-9'0"blade width

730-781.5lbs

2'7"blade height

12-gauge powder-coated steel moldboard
Full-trip moldboard with four coil springs
Six vertical and two angled power ribs
Tubular steel A-frame and large center pin
½ x 6 inch steel cutting edge standard

Full specifications

Models	7600HD, 8000HD, 8600HD, 9000HD
Blade width	7'6" / 8'0" / 8'6" / 9'0"
Approx. weight	730 lbs / 746.5 lbs / 763.5 lbs / 781.5 lbs
Plowing width (straight)	7'6" (9'3" w/ Wings) / 8'0" (9'9" w/ Wings) / 8'6" (10'3" w/ Wings) / 9'0" (10'9" w/ Wings)
Plowing width (full angle)	6'6" (7'11" w/ Wings) / 6'11" (8'5" w/ Wings) / 7'5" (8'10" w/ Wings) / 7'9" (9'4" w/ Wings)
Blade height	2'7"
Cutting edge	½" x 6" (Standard)
Blade thickness	12 ga
Blade type	Straight Blade
Moldboard	Powder-Coated Steel
Vehicle compatibility	Class 2-5 Trucks & 3-4 Series Tractors
Reinforcement ribs	6 vertical/2 angle
Trip springs	4 steel

Source: SnowEx Heavy-Duty plow page.

SnowEx truck snowplow

SnowEx RDV

A lightweight V-plow for half-ton trucks, in powder-coated or stainless steel.

7'6"blade width

493-539lbs

V / scoop / straightpositions

Low-alloy steel frame, stronger than traditional steel, the maker says
Double-acting angle cylinders for back dragging
Independent trip edge in scoop, V or straight
Integrated snow catcher between the wings

Full specifications

Models	77795 (stainless steel) / 77790 (powder-coated steel)
Blade width	7'6"
Approx. weight	539 lbs / 493 lbs
Plowing width (straight)	Straight: 7'6" / V: 6'3" / Scoop: 6'9"
Plowing width (full angle)	6'7"
Blade height	At Center: 27" / At End: 33"
Cutting edge	⅜" x 6" (Standard)
Blade thickness	14 ga
Blade type	V-Plow
Moldboard	Stainless Steel / Powder-Coated Steel
Vehicle compatibility	Half-Ton Trucks & Series 3 Tractors
Reinforcement ribs	6 Vertical, 2 Horizontal / 6 Vertical
Trip springs	2

Source: SnowEx RDV plow page.

SnowEx truck snowplow

SnowEx HDV

A heavy-duty V-plow with a flared moldboard for Class 2-6 trucks and tractors.

8'6"-9'6"blade width

950-1,020lbs

Class 2-6trucks

Flared moldboard, 2'7" at the hinge
Powder-coated or stainless steel moldboard
Double-acting angle cylinders
Adjustable center cutting edge and integrated snow catcher
Stable in the V position for hook-up, no stand needed

Full specifications

Models	77770, 77775, 77780, 77785
Blade width	8'6" / 9'6"
Approx. weight	950 lbs / 1,020 lbs
Plowing width (straight)	Straight: 8'6" (9'5" w/ Wings) / Straight: 9'6" (10'5" w/ Wings)
Plowing width (full angle)	7'6" (9'7" w/ Wings) / 8'7" (9'10" w/ Wings)
Blade height	At Hinge: 2'7" / At End: 3'2" / 3'3"
Cutting edge	⅜" (Standard) / ½" (Standard)
Blade thickness	16 ga
Blade type	V-Plow
Moldboard	Stainless Steel / Powder-Coated Steel
Vehicle compatibility	Truck Class 2 - 6 (under 26,000 lb GVWR) & Tractors
Reinforcement ribs	6 vertical/1 angle / 8 vertical/1 angle
Trip springs	4 steel / 6 steel

Source: SnowEx HDV plow page.

SnowEx truck snowplow

SnowEx SPEEDWING

An automatic wing plow: mechanical wings set themselves as you angle the blade.

8'7"-9'8"blade width

891.5lbs

Up to 30%more snow in scoop

Wings move from scoop to windrow automatically as the blade angles
Spring-loaded wings retract when they hit an obstacle
Wings pin back for a wider straight blade
Formed torque box with four welded vertical ribs

Full specifications

Models	8600SW
Blade width	8'7" - 9'8"
Approx. weight	891.5 lbs
Plowing width (straight)	Scoop: 8'7"
Plowing width (full angle)	Windrow: 7'10"
Blade height	2'6"
Cutting edge	Blade: ½" x 6" (Standard) / Wing: ½" x 8" (Standard)
Blade thickness	12 ga
Blade type	Automatic Winged Blade
Moldboard	Powder-Coated Steel
Vehicle compatibility	Class 2-5 Trucks & Skid-Steers (50 to 70 HP)
Reinforcement ribs	4
Trip springs	4 Steel

Source: SnowEx SPEEDWING plow page.

SnowEx truck snowplow

SnowEx POWER PLOW

A wing plow with independent hydraulic wings: compact, wide pass or bucket blade at the push of a button.

8'-11'blade width

970-1,036lbs

Up to 30%more snow in scoop

Wings expand the 8100PP from 8 to 10 feet and the 8611PP from 8½ to 11 feet
BUCKET BLADE scoop mode carries up to 30% more snow
Built-in pressure relief lets the wings give on impact
Full-trip moldboard with four coil springs

Full specifications

Models	8100PP, 8611PP
Blade width	8' - 10' / 8'6" - 11'
Approx. weight	970 lbs / 1,036 lbs
Plowing width (straight)	8' - Compact, 8'9" - BUCKET BLADE, 10' - WIDE PASS / 8'6" - Compact, 9'10" - BUCKET BLADE, 11' - WIDE PASS
Plowing width (full angle)	7'2" - 8'10" / 7'11" - 10'6"
Blade height	2'7"
Cutting edge	Blade: ½" x 6" / Wing: ¼" x 10"
Blade thickness	Blade: 12 ga / Wing: 11 ga
Blade type	Adjustable Winged Blade
Moldboard	Powder-Coated Steel
Vehicle compatibility	Class 2-5 Trucks & Tractors / Class 2-6 Trucks
Reinforcement ribs	4
Trip springs	4 steel / 6 steel

Source: SnowEx POWER PLOW page.

SnowEx UTV snowplow

SnowEx Mid-Duty UTV

A lightweight straight blade for mid-size, crossover and sport UTVs, with hydraulic or winch lift.

5'6"-6'0"blade width

170-195lbs

Hydraulic or winchlift

Patented Sway-Frame lets the blade shift side to side with the wheel track
High-strength, low-alloy steel keeps weight off the UTV frame
Receivers come off; the mount can stay on all year
Winch version angles by hand with a pin

Full specifications

Models	6000MD, 7200MD
Blade width	5'6" / 6'0"
Approx. weight	5'6" hydraulic 195 lbs / 5'6" winch 170 lbs / 6'0" hydraulic 195 lbs / 6'0" winch 175 lbs
Plowing width (straight)	4'11" / 5'4"
Blade height	1'8"
Cutting edge	¼" x 4" (Standard)
Blade thickness	16 ga
Blade type	Straight Blade
Moldboard	High-Strength Steel
Vehicle compatibility	Mid Sized, Crossover & Sport UTVs
Reinforcement ribs	4
Trip springs	2

Source: SnowEx Mid-Duty UTV plow page.

SnowEx UTV snowplow

SnowEx Heavy-Duty UTV Straight Blade

A 6-foot hydraulic lift-and-angle straight blade for full-size UTVs and sub-compact tractors.

6'0"blade width

261lbs

5'4"plowing width

Full hydraulic lift and angle
14-gauge powder-coated steel moldboard
Blade trips to protect the plow, UTV and operator
Deflector, shoe, curb guard and light bar kits available

Full specifications

Models	77760
Blade width	6'0"
Approx. weight	261 lbs
Plowing width	5'4"
Blade height	2'
Cutting edge	¼" x 5" (Standard)
Blade thickness	14 ga
Blade type	Straight Blade
Moldboard	High-Strength or Powder-Coated Steel
Vehicle compatibility	Full Sized UTVs & Sub-Compact Tractors
Reinforcement ribs	4
Trip springs	2 steel

Source: SnowEx Heavy-Duty UTV Straight Blade page.

SnowEx UTV snowplow

SnowEx Heavy-Duty UTV V-Plow

A 6-foot V-plow that switches between straight, scoop and V at the touch of a button.

6'0"blade width

355lbs

V / scoop / straightpositions

Double-acting cylinders run each wing on its own or lock them together
Adjustable center cutting edge
Self-aligning receiver brackets come off when not plowing
Stable in the V position for hook-up, no stand needed

Full specifications

Models	77765
Blade width	6'0"
Approx. weight	355 lbs
Plowing width (straight)	Straight: 6' (7' W/ Wings)
Plowing width (full angle)	5'/5'6" (5'7/6'1" W/ Wings)
Blade height	At Hinge: 2'2" / At End: 2'5"
Cutting edge	¼" x 5" (Standard)
Blade thickness	14 ga
Blade type	V-Plow
Moldboard	High-Strength or Powder-Coated Steel
Vehicle compatibility	Full Sized UTVs & Sub-Compact Tractors
Reinforcement ribs	6
Trip springs	2 steel

Source: SnowEx Heavy-Duty UTV V-Plow page.

Tailgate spreaders at a glance

Model	Utility	Wireless Utility	Tailgate Pro	Bulk Pro	Precision Pro	V-Maxx SP-2400
Capacity (volume)	3.0 cu ft / 3.25 cu ft	3.0 cu ft	5.75 cu ft / 10.75 cu ft	5.25 cu ft / 9.0 cu ft	6.0 cu ft	Based on Size of Dump Body
Capacity (weight)	240 lb / 260 lb	240 lb	460 lb / 860 lb	420 lb / 720 lb	480 lb	–
Spreading width	Up to 20' / Up to 25'	Up to 25'	Up to 40'	Up to 30' / Up to 40'	4' to 12'	Up to 40'
Approx. weight (empty)	75 lb / 65 lb / 68 lb / 79 lb	68 lb	106 lb / 141 lb	160 lb / 180 lb	290 lb	326 lb
Spinner	10"	10"	10"	10" / 12"	12"	12"

Hopper spreaders at a glance

Model	V-Pro UTV 32200	V-Pro 32300 & 32600	Renegade Compact	Renegade Poly	Renegade	HELIXX Poly
Capacity (volume)	11.0 cu ft	0.5 cu yd / 1.0 cu yd	0.35 cu yd / 0.7 cu yd	1.5 cu yd / 2.2 cu yd	1.5 cu yd / 2.2 cu yd / 3.0 cu yd / 4.0 cu yd / 5.0 cu yd	1.5 cu yd / 2.25 cu yd / 3.5 cu yd / 5.0 cu yd
Capacity (weight)	880 lb	1,080 lb / 2,160 lb	750 lb / 1,500 lb	3,240 lb / 4,752 lb	3,240 lb / 4,752 lb / 6,480 lb / 8,640 lb / 10,800 lb	3,120 lb / 4,680 lb / 7,280 lb / 10,400 lb
Spreading width	Up to 30'	Up to 40'	Salt: Up to 36' / Sand: Up to 24'	Salt: Up to 36' / Sand: Up to 24'	Salt: Up to 36' / Sand: Up to 24'	8 - 40 ft
Approx. weight (empty)	280 lb	386 lb / 416 lb	235 lb / 192 lb / 420 lb / 337 lb	723 lb / 673 lb / 823 lb / 793 lb	530 lb / 500 lb / 580 lb / 550 lb / 750 lb / 700 lb / 820 lb / 770 lb / 910 lb / 850 lb	412 lb / 443 lb / 694 lb / 718 lb
Spinner	12"	12"	12" Diameter	16" Diameter	16" Diameter	12"

Drop and walk-behind spreaders at a glance

Model	Drop Pro 600	Drop Pro 1400	Drop Pro 250 & 600 Stainless	Walk-Behind Broadcast Spreaders	Walk-Behind Drop Spreaders	Walk-Behind Liquid Sprayer
Capacity (volume)	6.0 cu ft	14.0 cu ft	2.5 cu ft / 6.0 cu ft	1.5 cu ft / 2.0 cu ft	1.5 cu ft	12 gal
Spreading width	36"	48"	30 to 36"	Up to 20'	28"	–
Approx. weight (empty)	175 lb	375 lb	130 lb / 160 lb	25 lb / 42 lb	55 lb	60 lb
Overall dimensions (LxWxH)	24" x 49.5" x 28"	30" x 60" x 38"	17" x 42" x 17.25" / 20" x 42" x 28"	50" x 26" x 28" / 52" x 29" x 33"	48" x 38.25" x 36"	48" x 28" x 33"

Truck snowplows at a glance

Model	Light Truck	Regular-Duty	Heavy-Duty	RDV	HDV	SPEEDWING	POWER PLOW
Blade width	6'8" / 7'2"	7'6" / 8'0"	7'6" / 8'0" / 8'6" / 9'0"	7'6"	8'6" / 9'6"	8'7" - 9'8"	8' - 10' / 8'6" - 11'
Approx. weight	306 lbs / 313 lbs	415 lbs / 425 lbs	730 lbs / 746.5 lbs / 763.5 lbs / 781.5 lbs	539 lbs / 493 lbs	950 lbs / 1,020 lbs	891.5 lbs	970 lbs / 1,036 lbs
Plowing width (full angle)	5'11" / 6'4"	6'9" / 7'3"	6'6" (7'11" w/ Wings) / 6'11" (8'5" w/ Wings) / 7'5" (8'10" w/ Wings) / 7'9" (9'4" w/ Wings)	6'7"	7'6" (9'7" w/ Wings) / 8'7" (9'10" w/ Wings)	Windrow: 7'10"	7'2" - 8'10" / 7'11" - 10'6"
Blade height	23.5"	27"	2'7"	At Center: 27" / At End: 33"	At Hinge: 2'7" / At End: 3'2" / 3'3"	2'6"	2'7"
Blade thickness	16 ga	14 ga	12 ga	14 ga	16 ga	12 ga	Blade: 12 ga / Wing: 11 ga
Trip springs	2 steel	2 steel	4 steel	2	4 steel / 6 steel	4 Steel	4 steel / 6 steel

UTV and compact tractor snowplows at a glance

Model	Mid-Duty UTV	Heavy-Duty UTV Straight Blade	Heavy-Duty UTV V-Plow
Blade width	5'6" / 6'0"	6'0"	6'0"
Approx. weight	5'6" hydraulic 195 lbs / 5'6" winch 170 lbs / 6'0" hydraulic 195 lbs / 6'0" winch 175 lbs	261 lbs	355 lbs
Blade height	1'8"	2'	At Hinge: 2'2" / At End: 2'5"
Cutting edge	¼" x 4" (Standard)	¼" x 5" (Standard)	¼" x 5" (Standard)
Blade thickness	16 ga	14 ga	14 ga
Trip springs	2	2 steel	2 steel

SnowEx parts, manuals and accessories

SnowEx posts parts lists, installation instructions and owner's manuals in its online Document Library, searchable by part number, literature number or keyword. Bring your model or part number to the Clinton parts counter and we will look up and order the genuine SnowEx part.

Mount kits
Cutting edges
Deflector kits
Shoe kits
Curb guards
Light bar kits
Weather covers
Variable speed controls
Gate cable kits
Vibrator kits
Material control tubes
ArctiMaxx grease

Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

Built into SnowEx plows and spreaders

01Automatixx attachment system
Hook up a truck plow from the driver's side. Plug in the electrical connections, flip the power attachment switches and the plow attaches and raises in one automatic motion, then engage the pin lever.
02Removable receiver brackets
Self-aligning receiver brackets come off the truck with the plow, which the maker says gives good ground clearance the rest of the year.
03HELIXX shaftless auger
A corkscrew auger with variable flights runs the full length of the hopper to keep salt moving and cut down on clogs and bridging. It is used in HELIXX and Renegade auger models.
04Sealed electric spinner drive
Spreader spinner motors run on 12-volt power from the vehicle and sit in a sealed drive enclosure, protected from the weather.

2-year commercial warranty

SnowEx warrants its spreaders, sprayers and snowplows against defects for two years from original purchase.

Warranty terms

SnowEx warrants a spreader, sprayer or snowplow to the original purchaser. It must be free from defects in material and workmanship for two (2) years after the date of original purchase.

Accessories, service parts and components purchased separately are warranted for one (1) year after original purchase.

The maker says all warranty requests must be handled through a SnowEx dealer, and a claimed defect must be reported within ten (10) days of discovery.

Standard on every truck plow

Scrape Maxx down-force, FLEET FLEX electrical and SECURITY GUARD anti-theft come standard.

Standard plow features

Scrape Maxx applies downward force to maximize scrape performance and is standard on SnowEx truck plows.

The FLEET FLEX electrical system means any SnowEx plow can be used on any truck.

SECURITY GUARD electronically locks the plow from unauthorized use when it is off the truck, and the POWERCOAT multi-stage powder coat protects the finish.

SnowEx designs and builds its plow hydraulics in-house.

Check the fit first

SnowEx's Power Match tool lists which plows are approved for your vehicle.

Vehicle fit

If a vehicle is not listed in Power Match, SnowEx says it does not have an approved application under its guidelines and federal motor vehicle safety standards.

Hopper spreaders must be bolted to the truck frame for operator safety.

Options

SnowEx sells mounts, controls and liquid kits that change what a spreader or plow can do. Fit varies by model; ask us which ones match your machine.

Also available

Pivot Pal (PPT-175-1)
Lets a tailgate spreader swing away from the tailgate.
Tailgate spreaders
3-Point Mount (TPM-175-1)
Puts a 2-inch receiver hitch on the back of a tractor for a tailgate spreader.
Tractors
Utility and Drop Utility Mounts
Mount a tailgate spreader on the back of a utility vehicle; the drop version sits lower.
UTVs
Variable Speed Control (VAR-020)
Sets spinner width from one weather-resistant control in the cab.
Utility SP-125-1 and SP-225-1
Gate assembly and vibrator kits
Let a Tailgate Pro spread fine materials and bulk salt.
Tailgate Pro
Material Control Tube and 30-gallon liquid kit
Add fine materials and pre-wet to Bulk Pro and V-Pro spreaders.
Bulk Pro, V-Pro
Triple Threat liquid system
Pre-wet tanks, a pump and a spray kit let a HELIXX spreader pre-wet salt or spray brine directly on the road.
HELIXX
UTV plow kits
8-inch rubber deflector, shoe kit, curb guards and a dual-LED light bar.
Heavy-Duty UTV plows

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday

Get directions (315) 853-6151

Driving distance

New Hartford 6 mi
Utica 9 mi
Rome 14 mi
Oneida 17 mi
Hamilton 20 mi
Herkimer 26 mi
Cazenovia 31 mi
Norwich 42 mi
Cooperstown 47 mi
Syracuse 49 mi
Oneonta 60 mi
Cortland 61 mi

Before you visit

Can I see SnowEx snowplows and spreaders in person?

Call (315) 853-6151 before you drive over and ask which SnowEx snowplows and spreaders we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.

SnowEx Snowplow and Spreader Dealer in Central New York

Tailgate spreaders

Hopper spreaders

Drop and walk-behind spreaders

Truck snowplows

UTV and compact tractor snowplows

SnowEx history: from salt spreaders to a full line

Compare SnowEx snowplows and spreaders

SnowEx Utility

SnowEx Wireless Utility

SnowEx Tailgate Pro

SnowEx Bulk Pro

SnowEx Precision Pro

SnowEx V-Maxx SP-2400

SnowEx V-Pro UTV 32200

SnowEx V-Pro 32300 & 32600

SnowEx Renegade Compact

SnowEx Renegade Poly

SnowEx Renegade

SnowEx HELIXX Poly

SnowEx Drop Pro 600

SnowEx Drop Pro 1400

SnowEx Drop Pro 250 & 600 Stainless

SnowEx Walk-Behind Broadcast Spreaders

SnowEx Walk-Behind Drop Spreaders

SnowEx Walk-Behind Liquid Sprayer

SnowEx Light Truck

SnowEx Regular-Duty

SnowEx Heavy-Duty

SnowEx RDV

SnowEx HDV

SnowEx SPEEDWING

SnowEx POWER PLOW

SnowEx Mid-Duty UTV

SnowEx Heavy-Duty UTV Straight Blade

SnowEx Heavy-Duty UTV V-Plow

Tailgate spreaders at a glance

Hopper spreaders at a glance

Drop and walk-behind spreaders at a glance

Truck snowplows at a glance

UTV and compact tractor snowplows at a glance

SnowEx parts, manuals and accessories

Service department

Built into SnowEx plows and spreaders

01Automatixx attachment system

02Removable receiver brackets

03HELIXX shaftless auger

04Sealed electric spinner drive

2-year commercial warranty

Standard on every truck plow

Check the fit first

Options

Also available

Pivot Pal (PPT-175-1)

3-Point Mount (TPM-175-1)

Utility and Drop Utility Mounts

Variable Speed Control (VAR-020)

Gate assembly and vibrator kits

Material Control Tube and 30-gallon liquid kit

Triple Threat liquid system

UTV plow kits

Find us in Clinton

Driving distance

Before you visit