Schulte Rotary Cutter and Rock Picker Dealer in Central New York

Showing all 37 models

Schulte flex-wing cutter

Schulte GX-130

13 foot general duty flex wing cutter with a 540 RPM drive.

13’cutting width

93”transport width

45hpmin. tractor

• Single domed 10ga continuously welded deck
• 80° CV shaft and self-adjusting friction clutches
• Super Suction blades with 6.5” overlap
• Deck protection rings standard
• Wing working range of 25° down to 90° up

Full specifications

Cutting Width	13’ (3.96m)
Overall Width	13.8’ (4.22m)
Overall Length	16.8’ (5.13m)
Cutting Height	1.75”-16.75” (45mm-425mm)
Transport Width	93” (2.36m)
Transport Height	72” (1.83m)
Weight	4725 lbs (2143 kg)
Hitch Weight	1420 lbs (644 kg)
Cutting Capacity	2.5” (89mm)
Minimum Tractor HP	45hp (36kw)
Blade Tip Speed (540 RPM)	Center - 16,286 ft/min (4964m/min), Wing - 16031 ft/min (4886 m/min)
Blade Overlap	6.5” (165mm)
Divider Gearbox Rating	250hp (186kw)
Center & Wing Gearbox Rating	130hp (97kw)
540 CV	Cat 6
Wing Drive Shafts	Cat 5
Deck Thickness	.135” (10ga or 3.4mm)
Side Skirt Depth & Thickness	13.6” (346mm) 1/4” (6.4mm)
Wing Working Range	25° down to 90° up
Wing Floating Range	25° down to 30° up

Source: Schulte GX-130 page on schulte.ca.

Schulte flex-wing cutter

Schulte GX-150

General duty 15 foot flex wing rotary mower.

15’cutting width

3.5”cutting capacity

50hpmin. tractor

• Single domed 10ga continuously welded deck
• Four-gearbox driveline with independent slip clutches
• Super Suction blades with 6.5” overlap
• 540 or 1000 RPM drive package
• 4, 6 or 8 tire options

Full specifications

Cutting Width	15’ (4.57m)
Overall Width	15.8’ (4.83m)
Overall Length	16.8’ (5.13m)
Cutting Height	1.75”-16.75” (45mm-425mm)
Transport Width	93” (2.36m)
Transport Height	84” (2.13m)
Weight	5,050lbs (2291kg)
Hitch Weight	1,520lbs (689kg)
Cutting Capacity	3.5” (89mm)
Minimum Tractor HP	50hp (37kw)
Blade Tip Speed (540 RPM)	Center 16,286 ft/min (4964m/min) / Wing 15,459 ft/min (4711m/min)
Blade Tip Speed (1000 RPM)	Center 16,390 ft/min (4996m/min) / Wing 15,708 ft/min (4788m/min)
Blade Overlap	6.5” (165mm)
Divider Gearbox Rating	260hp (194kw)
Center & Wing Gearbox Rating	210hp (155kw)
540 CV	Cat 6
1000 CV	Cat 5
Wing Drive Shafts	Cat 5
Deck Thickness	.135” (10ga or 3.4mm)
Side Skirt Depth & Thickness	13.6” (346mm) 1/4” (6.4mm)
Wing Working Range	25° down to 90° up
Wing Floating Range	25° down to 30° up

Source: Schulte GX-150 page on schulte.ca.

Schulte flex-wing cutter

Schulte FX-1200

Medium duty, 10 foot rotary mower.

126”cutting width

4"cutting capacity

45 HPmin. tractor

• Single domed 7 ga continuously welded deck
• 6.5” blade overlap and high blade tip speeds
• Four gearbox driveline with independent slip clutches
• Available in 540 or 1000rpm drive
• Optional DOT equipped unit and hydraulic phasing cylinder kit

Full specifications

Cutting Width	126” (3.20m)
Overall Width	137” (3.48m)
Overall Length	202” (5.13m)
Transport Width	93” (2.36m) (Singles on wings) 97.5" (2.47m) (Duals on wings)
Transport Height	84"(2.13m)
Deck Thickness	7GA (3/16",4.6mm)
Weight	5,600 lbs (2540kg) (Depends on configuration)
Hitch Weight	1602 lbs (727kg) (Depends on configuration)
Minimum Tractor HP	45 HP (34kW)
Recommended Tractor HP	80 HP (60kW)
Tractor PTO Speed	540 or 1000rpm
Cutting Height	1.75"to 16.75" (44.5mm to 425mm)
Ground Clearance	14.75"(42.5mm)
Cutting Capacity	4"(101.6mm)
Blade Overlap	6.5"(165.1mm)
Divider Gearbox Rating	260 HP (194kw)
Center & Wing Gearbox Rating	210 HP (142kw)
Output Shaft	2.38"(60.3mm)
Blade Tip Speed (540 RPM)	Center 15980 ft/min (4871m/min) / Wing 15708 ft/min (4788m/min)
Wing Working Range	25° down to 30° up
Wing Floating Range	25° down to 87° up
Drive Size, Main	Cat.5CV (1000rpm), Cat.6 CV (540 rpm)
Drive Size, Centre and Wings	Category 5
Side Skirt Depth & Thickness	13.63"(346mm)& 1/4 ” (6.35mm)

Source: Schulte FX-1200 page on schulte.ca.

Schulte flex-wing cutter

Schulte FX-212

Schulte's first 12 foot, 2 rotor flex wing mower.

144”cutting width

90”transport width

70HPmin. tractor

• Ultra narrow transport width
• Single 7 gauge domed deck sheds water and debris
• 540 or 1000rpm 80° CV drive, 540 equal angle drive or Pro Level Hitch
• Spun formed 7 gauge stump jumpers
• For crop residue, pastures, weeds, orchards and roadsides

Full specifications

Cutting Width	144” (5.5m)
Overall Width	160” (5.8m)
Overall Length	208” (5.3m)
Transport Width	90” (2.2m)(Singles on wings) 95” (2.4m)(Duals on wings)
Transport Height	109” (2.77m)
Deck Thickness	7GA (3/16”, 4.6mm)
Weight	5750 lbs (2614kg) (Depends on configuration)
Hitch Weight	2234 lbs (1066kg)(Depends on configuration)
Minimum Tractor HP	70HP (56kW)
Recommended Tractor HP	85HP (67kW)
Tractor PTO Speed	540 or 1000rpm
Cutting Height	1.75” to 16.75” (44.5mm to 425mm)
Ground Clearance	14.75” (42.5mm)
Cutting Capacity	3.5” (89mm)
Blade Overlap	6” (152mm)
Divider Gearbox Rating	260HP (194kw)
Center & Wing Gearbox Rating	210HP (157kw)
Output Shaft	2.38” (60.3mm)
Blade Tip Speed (540 RPM)	Center 15980 ft/min (4871m/min) Wing 16319 ft/min (4974m/min)
Blade Tip Speed (1000 RPM)	Center 15974 ft/min (4869m/min) Wing 16581 ft/min (5054m/min)
Wing Working Range	25° down to 80° up
Wing Floating Range	25° down to 30° up
Drive Size, Main	Cat. 6 CV (1000rpm) Cat. 6 CV (540 rpm)
Drive Size, Centre and Wings	Category 5
Side Skirt Depth & Thickness	13.63” x .25” (346mm x 6.35mm)
Suspension	Rubber 3 puck grommet

Source: Schulte FX-212 page on schulte.ca.

Schulte flex-wing cutter

Schulte FX-214

14 foot flex wing cutter with a 15” deep deck and Super Suction blades.

170.75”cutting width

108”transport width

70 HPmin. tractor

• Single-domed 7ga continuously welded deck
• Super Suction blades with 6” blade overlap
• Three gearbox driveline with independent slip clutches
• Wing working range of 20° down to 90° up
• Replaceable side skirts

Full specifications

Cutting Width	170.75” (4.34 m)
Overall Width	175.25” (4.45 m)
Overall Length	242” (6.15 m)
Cutting Height	2”- 19.5” (51 - 450 mm)
Transport Width	108” (2.74 m)
Transport Height	120” (3.05m)
Weight	7350 lbs (3334 kg)
Hitch Weight	2100 lbs (953 kg)
Cutting Capacity	Pan Unit 4” (102mm)
Minimum Tractor HP	70 HP (52 kW)
Blade Tip Speed (540 RPM)	16031 ft/min (4886m/m)
Blade Tip Speed (1000 RPM)	16289 ft/min (4965m/m)
Blade Overlap	6” (153mm)
Divider Gearbox Rating	260 hp (194kw)
Center & Wing Gearbox Rating	225 hp (168kw)
Wing Drive Shafts	Cat 6
Deck Thickness	.180” (7 ga) (4.6mm)
Side Skirt Thickness	1/4” (6.4mm)
Side Skirt Depth	15” (381mm)
Wing Working Range	20° down to 90° up
Wing Floating Range	20° down to 40° up
Drive Size, Centre and Wings	G8 / G9
Drive Size, Main	Cat.5CV (1000rpm) Cat.6CV (540 rpm)
Suspension	Three rubber suspension pucks on center and single on wing

Source: Schulte FX-214 page on schulte.ca.

Schulte flex-wing cutter

Schulte FX-1800

Medium duty 15′ flex wing rotary cutter.

180”cutting width

4"cutting capacity

50 HPmin. tractor

• Single domed 7 ga continuously welded deck
• Bondioli gearboxes with independent slip clutches
• 80 degree CV shaft for tight turns
• Spun formed 7 gauge stump jumpers
• Available in 540 or 1000rpm drive

Full specifications

Cutting Width	180 ” (4.57m)
Overall Width	190 ” (4.83m)
Overall Length	202 ” (5.13m)
Transport Width	93” (2.36m) (Singles on wings) 102" (2.59m) (Duals on wings)
Transport Height	84"(2.13m)
Deck Thickness	7GA (3/16",4.6mm)
Weight	5,600 lbs (2540kg) (Depends on configuration)
Hitch Weight	1680 lbs (762kg) (Depends on configuration)
Minimum Tractor HP	50 HP (37kW)
Recommended Tractor HP	85 HP (63kW)
Tractor PTO Speed	540 or 1000rpm
Cutting Height	1.75"to 16.75" (44.5mm to 425mm)
Ground Clearance	14.75"(42.5mm)
Cutting Capacity	4"(101.6mm)
Blade Overlap	6.5"(165.1mm)
Divider Gearbox Rating	260 HP (194kw)
Center & Wing Gearbox Rating	225 HP (168kw) (based on intermittent use)
Output Shaft	2.38"(60.3mm)
Blade Tip Speed (540 RPM)	Center 15980 ft/min (4871m/min) / Wing 15459 ft/min (4711m/min)
Blade Tip Speed (1000 RPM)	Center 15974 ft/min (4869m/min) / Wing 15708 ft/min (4788m/min)
Wing Working Range	25° down to 87° up
Wing Floating Range	25° down to 30° up
Drive Size, Main	Cat.5CV (1000rpm),Cat.6 CV (540 rpm)
Drive Size, Centre and Wings	Category 6
Side Skirt Depth & Thickness	13.63" (346mm) & 1/4” (6.35mm)
Suspension	Rubber gromett 3 puck system
Tires	Laminate, Aircraft (5 bolt) 22” size

Source: Schulte FX-1800 page on schulte.ca.

Schulte flex-wing cutter

Schulte FX-1800C Contractor

15 foot contractor cutter with deck protection rings and an optional 8 bolt hub with skid steer tires.

15’cutting width

4,653lbsweight

50hpmin. tractor

• Single domed 7ga continuously welded deck
• Heavy-duty Bondioli gearboxes with independent slip clutches
• Deck protection rings standard
• Optional 812 (8 bolt) hub with 12 x 16.5 skid steer tires on the center section
• 540 or 1000 RPM CV drive

Full specifications

Cutting Width	15’ (4.57m)
Overall Width	15.8’ (4.83m)
Overall Length	16.8’ (5.13m)
Cutting Height	1.75”-16.75” (45mm-425mm)
Transport Width	93” (2.36m)
Transport Height	84” (2.13m)
Weight	4,653lbs (2069kg)
Hitch Weight	1,702lbs (772kg)
Cutting Capacity	4” (101mm)
Minimum Tractor HP	50hp (37kw)
Blade Tip Speed (540 RPM)	Center 15,980 ft/min (4871m/min) Wing 15,459 ft/min (4711m/min)
Blade Tip Speed (1000 RPM)	Center 15,974 ft/min (4869m/min) Wing 15,708 ft/min (4788m/min)
Blade Overlap	6.5” (165mm)
Divider Gearbox Rating	260hp (194kw)
Center & Wing Gearbox Rating	225hp (168kw)
Deck Thickness	.187” (7ga or 4.6mm)
Side Skirt Depth	13.6” (346mm)
Wing Working Range	25° down to 90° up
Wing Floating Range	25° down to 30° up

Source: Schulte FX-1800C Contractor page on schulte.ca.

Schulte flex-wing cutter

Schulte XH-1000

Has all of the features of the XH-1500, in a 10′ width.

126"cutting width

5"material with brush blade

70 HPmin. tractor

• Industrial grade 10 foot flex wing cutter
• 275 HP divider gearbox, 240 HP centre and wing gearboxes
• 15 3/8” deep side band skirts
• Walking axles available

Full specifications

Cutting Width	126" (3.20m)
Overall Width	139" (3.53m)
Overall Length	198" (5.03m)
Overall length with walking axles	207" (5.26m)
Transport Width	89” (2.26m)
Transport Height	84” (2.13m)
Side band skirt depth	15 3/8” (.39m)
Side band skirt thickness	1/4” (6.35mm)
Weight	7360lbs (3338kg) (with walking axles, approx.)
Hitch Weight	2100lbs (953kg)
Minimum Tractor HP	70 HP (52kW)
Maximum Tractor HP	90 HP (67kW)
Cutting Height	1.5 to 19.25" (38 to 490mm)
Ground clearance, transport	18.5" (470mm) (27” tires)
Cutting Capacity	5" material (127mm) with brush blade
Blade Overlap	6.5" (165mm)
Divider Gearbox Rating	275 HP (205kW)
Center & Wing Gearbox Rating	240 HP (179kW)
Blade Tip Speed (540 RPM)	Centre 848 rpm, 16,286 ft/min (4964m/min) / Wing 986 rpm, 16,030 ft/min (4886m/min)
Blade Tip Speed (1000 RPM)	Centre 850 rpm, 16,390 ft/min (4996m/min) / Wing 1002 rpm, 16,290 ft/min (4965m/min)
Wing Working Range	25 degrees down to 90 degrees up
Wing Floating Range	25 degrees down to 45 degrees up
Drive Size, Centre and Wings	Cat 6
540 CV	Cat 6
1000 CV	Cat 5

Source: Schulte XH-1000 page on schulte.ca.

Schulte flex-wing cutter

Schulte XH-1500 Series 5

Extra heavy duty 15 foot industrial rotary cutter.

180"cutting width

5"material with brush blade

275 HPdivider gearbox

• 240 HP Bondioli gearboxes with oil level sight glass
• Maintenance-free fibre wound bushings at major pivot points
• Floating hitch with tension links and a replaceable 2 1/4″ swivel
• Walking or through axles on centre section and wings
• Phased hydraulic cylinders standard for level lifting

Full specifications

Cutting Width	180" (4.57m)
Overall Width	189" (4.80m)
Overall Length	198" (5.03m)
Overall length with walking axles	207" (5.26m)
Transport Width	89" (2.26m)
Transport Height	84" (2.13m)
Deck Thickness	7GA (3/16") (4.6mm)
Side band skirt depth	15 3/8” (.39m)
Side band skirt thickness	1/4” (6.35mm)
Weight	7360lbs (3338kg) (with walking axles, approx.)
Hitch Weight	2500lbs (1134kg)
Minimum Tractor HP	70 HP (52kW)
Recommended Tractor HP	90 HP (67kW)
Cutting Height	1.5" to 19.25" (38 to 490m)
Ground clearance, transport	18.5" (470mm) (26” tires)
Cutting Capacity	5" material (127mm) with brush blade
Blade Overlap	6.5" (165mm)
Divider Gearbox Rating	275 HP (205kW)
Center & Wing Gearbox Rating	240 HP (179kW) (based on intermittent use)
Blade Tip Speed (540 RPM)	Centre 848 rpm, 16,286 ft/min (4964m/min) / Wing 986 rpm, 16,030 ft/min (4886m/min)
Blade Tip Speed (1000 RPM)	Centre 850 rpm, 16,390 ft/min (4996m/min) / Wing 1002 rpm, 16,290 ft/min (4965m/min)
Wing Working Range	25 degrees down to 90 degrees up
Wing Floating Range	25 degrees down to 45 degrees up
Drive Size, Centre and Wings	Cat 6
540 CV	Cat 6
1000 CV	Cat 5

Source: Schulte XH-1500 Series 5 page on schulte.ca.

Schulte rigid-deck cutter

Schulte GX-107

General duty, 7 foot rigid deck mower.

84”cutting width

3”cutting capacity

50 HPmin. tractor

• Pull type, Cat 2&3 3-point and Cat 2 quick hitch options
• 1/2” x 4” x 31” Schulte Super Suction blades
• 540 RPM drive with an 80° CV shaft on trailing units
• Standard deck protection ring
• Double safety chains front and rear

Full specifications

Cutting Width	84” (2.13m)
Overall Width	96” (2.43m)
Transport Clearance	10” (25.4cm)
Cutting Height	3” - 13” (7.6cm-33cm)
Cutting Capacity	3” (7.6cm)
Approximate Weight	2152lbs (976kg) trailing, 1806lbs (819kg) 3pt
Hitch Type	Cat 2&3 3pt, Cat 2 quick hitch / Trailing pull
Deck Thickness	7ga (3/16”, 4.6mm)
Deck protection ring	1/4” x 5.5” x 70.25”
Side Skirt	1/4” x 13.69” (6.35mm x 347mm)
Blade Tip Speed	540rpm-16328 FPM
Tractor PTO Speed	540rpm
Minimum Tractor HP	50hp (37.3kw)
Deflectors	Double chain front and rear

Source: Schulte GX-107 page on schulte.ca.

Schulte rigid-deck cutter

Schulte FX-107

Seven foot single rotor cutter with a rigid, domed 7 gauge deck.

84"cutting width

3"cutting capacity

50 HPmin. tractor

• Heavy duty gearbox and driveline, the same units as Schulte's large cutters
• 1/4” x 4” deck protection ring
• Pull type and 3 point hitching options
• Larger pan with shorter blades for durability
• Double safety chains front and rear

Full specifications

Cutting Width	84" (2.13 m)
Overall Width	95.5" ( 2.43 m)
Overall Length	173.5" (4.41 m) Trailing Unit
Transport Clearance	10.5" (26.7 cm)
Cutting Height	3" - 12 7/8" (7.6 cm - 33 cm)
Cutting Capacity	3" (7.6 cm)
Approximate Weight	Trailing -2010 lbs (912 kg), 3 Point -1980 lbs (898 kg)
Hitch Type	Cat. II & III 3 Point / Trailing Pull
Deck Thickness	7 GA (3/16", 4.6 mm)
Side Skirt	1/4" x 13.69" ( 6.35 mm x 347 mm)
Gear Box Rating	Center 210 hp (157kw)
Blade Tip Speed	540 RPM - 17086 FPM
Tractor PTO Speed	540
Minimum Tractor HP	50 HP ( 37.3 kW)
Deflectors	Double Chain Front and Rear

Source: Schulte FX-107 page on schulte.ca.

Schulte rigid-deck cutter

Schulte GX-209

General duty, 9 foot rigid deck mower.

109.25”cutting width

3”cutting capacity

540 / 1000RPM drive

• Two rotor, rigid single domed 7 gauge deck
• Pull type or Cat. 2&3 3-point
• 1/2” x 4” x 25” Super Suction updraft blades
• Blade tip speed over 17000 FPM
• Standard deck protection ring

Full specifications

Cutting Width	109.25” (2.78 m)
Overall Width	116.5” ( 2.96 m) Skids Inboard
Overall Length	162.5” (4.1 m) Trailing Unit, 127” (3.3 m), 3 Point
Transport Clearance	11.5” (29.2 cm)
Cutting Height	2” - 13” (5.1 cm - 33 cm)
Cutting Capacity	3” (7.6 cm)
Approximate Weight	2400 lbs (1088 kg) Trailing 2300 lbs (1043 kg) 3 Point
Hitch Type	Cat 2&3 3 Point / Trailing Pull
Deck Thickness	7 GA (3/16”, 4.6 mm)
Deck protection ring	1/4” x 4.5” x 44”
Side Skirt	1/4” x 13.75” ( 6.35 mm x 349 mm)
Blade Tip Speed	540 RPM - 17086 FPM 1000 RPM - 17355 FPM
Blade Overlap	4.75” ( 121 mm)
Tractor PTO Speed	540 or 1000 RPM
Minimum Tractor HP	50 HP ( 37.3 kW)
Deflectors	Double chain front and rear

Source: Schulte GX-209 page on schulte.ca.

Schulte rigid-deck cutter

Schulte FX-209

9 foot, 2 rotor rigid deck design with pull-type, 3-point and semi-mount hitches.

109.25"cutting width

3"cutting capacity

50 HPmin. tractor

• Rigid single domed 7 gauge deck
• 1/4” x 4” deck protection ring
• Pull type, three point, semi mount and semi mount swing hitches
• 540 and 1000 RPM drive options
• Four tire options, including forklift tires

Full specifications

Cutting Width	109.25" (2.78 m)
Overall Width	116.5" ( 2.96 m) Skids Inboard 120.5" (3.06 m) Skids Outboard
Overall Length	162.5" (4.1 m) Trailing Unit, 127" (3.3 m), 3 Point / Semi Mount Swing / Semi Mount
Transport Clearance	11.5" (29.2 cm)
Cutting Height	2" - 13" (5.1 cm - 33 cm)
Cutting Capacity	3" (7.6 cm)
Approximate Weight	2400 lbs (1088 kg) Trailing, 2300 lbs (1043 kg) 3 Point, 2100 lbs (952 kg) Semi Mount 2860 lbs (1297 kg) Semi Mount Swing
Hitch Type	Cat. II & III 3 Point / Semi Mount Swing (13” left or right swing), Semi Mount / Trailing Pull
Deck Thickness	7 GA (3/16", 4.6 mm)
Side Skirt	1/4" x 13.75" ( 6.35 mm x 337 mm)
Gear Box Rating	Outboard 210 HP (157 kW)
Blade Tip Speed	540 RPM - 17086 FPM 1000 RPM - 17355 FPM
Blade Overlap	4.75" ( 121 mm)
Tractor PTO Speed	540 or 1000 RPM
Minimum Tractor HP	50 HP ( 37.3 kW)
Deflectors	Double Chain Front and Rear

Source: Schulte FX-209 page on schulte.ca.

Schulte wide-area cutter

Schulte FX-318

18 foot flex wing cutter that runs on the same HP tractor as most 15’ flex wings.

216”cutting width

86”transport width

75HPmin. tractor

• Three sets of rotors
• Ultra narrow transport width
• Single 7 gauge domed deck
• 540rpm or 1000rpm 80° CV drive or 540 equal angle drive
• Fixed knife shredding kit for crop residue

Full specifications

Cutting Width	216” (5.5m)
Overall Width	228” (5.8m)
Overall Length	208” (5.3m)
Transport Width	86” (2.2m)(Singles on wings) 96” (2.4m) (Duals on wings)
Transport Height	109” (2.77m)
Deck Thickness	7GA (3/16", 4.6mm)
Weight	5800 lbs (2631kg) (Depends on configuration)
Hitch Weight	2350 lbs (1066kg)(Depends on configuration)
Minimum Tractor HP	75HP (56kW)
Recommended Tractor HP	90HP (67kW)
Tractor PTO Speed	540 or 1000rpm
Cutting Height	1.75" to 16.75" (44.5mm to 425mm)
Ground Clearance	14.75" (42.5mm)
Cutting Capacity	3.5" (89mm)
Blade Overlap	6" (152mm)
Divider Gearbox Rating	260HP (194kw)
Center & Wing Gearbox Rating	225hp (168kw) (based on intermittent use)
Output Shaft	2.38" (60.3mm)
Blade Tip Speed (540 RPM)	Center 15980 ft/min (4871m/min) / Wing 16319 ft/min (4974m/min)
Blade Tip Speed (1000 RPM)	Center 15974 ft/min (4869m/min) / Wing 16581 ft/min (5054m/min)
Wing Working Range	25 degrees down to 80 degrees up
Wing Floating Range	25 degrees down to 30 degrees up
Drive Size, Main	Cat.5CV (1000rpm), European Size 6 / Cat.6CV (540 rpm), European Size 8
Drive Size, Centre and Wings	Category 6
Side Skirt Depth & Thickness	13.63" (346mm) .25" thick (6.35mm)
Suspension	Rubber 3 puck grommet

Source: Schulte FX-318 page on schulte.ca.

Schulte wide-area cutter

Schulte TPX-318

18.5 foot 3-point cutter with fixed knives and shrouding for row crop residue.

18.5’cutting width

116.5”transport width

185min. HP

• Fixed knives and shrouding for residue in corn, cotton and sugar cane
• Adjustable wheel standards for row crop spacings
• Four position adjustable 3pt hitch
• Fold up design for narrow transport
• Only one hydraulic circuit needed

Full specifications

Cutting Width	18.5’ (5.64m)
Transport Width	116.5” (296cm) wing tip to wing tip
Machine height	8.75ft (2.67m)
Machine length	12.7 ft (3.87 m)
Weight	6,300lbs (2858kg)
Cutting Capacity	3.5” (8.9cm)
Cutting Height	2” - 17” (5-43cm)
Blade Overlap	3” (7.6cm)
Blades	1/2” x 4” (1.3cm X 10.2cm)
Minimum Tractor HP	185 (136kw) (3pt lift capacity dependent)
Maximum Tractor HP	325 (239kw)
Tractor RPM	1000
Divider Gearbox Rating	210hp (157kw)
Down boxes	210hp (157kw)
Cutter shafts	Cat 6 with rubber coupler
Center blade tip speed	16,308 (ft/min)
Wing blade tip speed	16,308 (ft/min)
Deck Thickness	10 ga (.34cm)
3pt hitch	Cat 2 quick, cat 3, cat 3 quick, cat 4, cat 4 quick
Tires	Skid steer - 10.5 (26.7cm) x 27” (68.6cm)
Safety deflectors	Single chains standard, rear and front belting option
Wing float	11 degrees down & 18 degrees up (lower cylinder mount), 0 degrees down & 20 degrees up (upper mount)

Source: Schulte TPX-318 page on schulte.ca.

Schulte wide-area cutter

Schulte FX-320

20 foot, 3 rotor flex wing cutter with a 15” deep deck.

240”cutting width

106”transport width

100 HPmin. tractor

• Single domed 7ga continuously welded deck
• Super Suction blades with 6” blade overlap
• Four gearbox driveline with independent slip clutches
• Wing working range of 20° down to 90° up
• Pan unit with updraft blades or shredder blade kit

Full specifications

Cutting Width	240” (6.1 m)
Overall Width	249” (6.32 m)
Overall Length	242” (6.15 m)
Cutting Height	2”- 19.5” (51 - 450 mm)
Transport Width	106” (2.40 m)
Transport Height	120” (3.05m)
Weight	9300 lbs (4218 kg)
Hitch Weight	2280 lbs (1034kg)
Cutting Capacity	Fixed Knife 2” (51mm), Pan Unit 4” (102mm)
Minimum Tractor HP	100 HP (75 kW)
Blade Tip Speed (540 RPM)	16031 ft/min (4886m/m)
Blade Tip Speed (1000 RPM)	16289 ft/min (4965m/m)
Blade Overlap	6” (153mm)
Divider Gearbox Rating	260 hp (194kw)
Center & Wing Gearbox Rating	225 hp (168kw) (intermittent use only)
Wing Drive Shafts	Cat 6
Deck Thickness	.180” (7 ga) (4.6mm)
Side Skirt Thickness	1/4” (6.4mm)
Side Skirt Depth	15” (381mm)
Wing Working Range	20° down to 90° up
Wing Floating Range	20° down to 40° up
Drive Size, Centre and Wings	G8 / G9
Drive Size, Main	Cat.5CV (1000rpm), Cat.6CV (540 rpm)
Suspension	Five rubber suspension pucks on center and single on wings

Source: Schulte FX-320 page on schulte.ca.

Schulte wide-area cutter

Schulte FX-520

20 foot wide, five rotor flex wing cutter.

240”cutting width

104"transport width

100 HPmin. tractor

• Five rotor design for an even spread of material
• 6 gearbox layout with a 260 hp divider box
• A slip clutch at each of the 5 down boxes
• Continuously welded 7 ga modular deck
• Hydraulic phasing cylinders for a parallel lift

Full specifications

Cutting Width	240” (6.1 m)
Overall Width	247” (6.2 m)
Overall Length	242” (6.15 m)
Cutting Height	2" - 17.5” (51 - 445 mm) depending on tire size
Transport Width	104" (2.6 m)
Transport Height	120” (3.05 m)
Weight	6525lbs. (2960 kg) (single chain, 6 tires, pans)
Hitch Weight	2280 lbs (1034kg) (single chain, 6 tires, pans)
Cutting Capacity	2" (51mm) (Fixed Knife Unit) 4" (102mm) (Pan Unit)
Minimum Tractor HP	100 HP (75 kW)
Blade Tip Speed	16000 ft/min (4900m/m)
Blade Overlap	6" (153mm)
Divider Gearbox Rating	260 hp (194kw)
Down Box Rating	225 hp (168kw) Intermittent use only
Deck Thickness	.180" (7 ga) (4.6mm)
Side Skirt Thickness	1/4" (6.4mm)
Wing Working Range	20 degrees down to 90 degrees up
Wing Floating Range	20 degrees down to 40 degrees up

Source: Schulte FX-520 page on schulte.ca.

Schulte wide-area cutter

Schulte 5026

26 foot wide, five rotor rotary cutter for mowing or shredding.

314”cutting width

117”transport width

120 HPmin. tractor

• 1000 RPM driveline with heavy duty slip clutches and an 80 degree CV joint
• 10 GA deck with deck protection rings
• Hydraulic phasing cylinders for level lift
• Suspension for centre and wing frames
• Optional fixed shredding blade kit

Full specifications

Cutting Width	314” (7.98 m)
Overall Width	321” maximum (8.15 m)
Overall Length	205” maximum (5.13 m)
Cutting Height	1” - 14” (25 - 356 mm)
Transport clearance	13” (330 mm)
Transport Width	117” (2.98 m)
Transport Height	148” (3.76 m)
Weight	6,800 lbs. (3,034 kg) (shipping weight, wet)
Hitch Weight	2,400 lbs. (1,089 kg) (transport)
Cutting Capacity	2” diameter material (50 mm)
Minimum Tractor HP	120 HP (90 kW)
Tractor Hydraulics	2 double acting circ, 1,750 psi (12 MPA)
Blade Tip Speed	15,300 ft/min (4663m/min)
Divider Gearbox Rating	260hp (194kw)
Down Box Rating	160hp (119kw)
Deck Thickness	.134” (10ga or 3.4mm)
Side Skirt Thickness	.18”(4.6mm)
Inside Wing Operating Range	15° down to 45° up

Source: Schulte 5026 page on schulte.ca.

Schulte wide-area cutter

Schulte FX-530

30 foot rotary cutter for mowing and shredding.

365"cutting width

118"transport width

200 hpmin. tractor

• Fits 30”, 32”, 36” and 38″ row spacings
• A clutch at each of the five down boxes
• 350hp, 60 degree splitter gearbox
• Floating hitch with rubber grommet rear suspension
• Cyclone Deck Debris Fan Kit available

Full specifications

Cutting Width	365" (30.4 ft or 9.3 m)
Overall Width	377" (31.4 ft or 9.6 m)
Overall Length	236" (19.7 ft or 6 m)
Cutting Height	2" - 15" (51mm - 381mm)
Transport Width	118" (3 m) (std wheel ext.)
Row Crop Wheel Ext., Transport Width	153" (3.88 m)
Transport Height - without hyd. folding wing tips	176" (14.7 ft or 4.5 m)
Transport Height - with hyd. folding wing tips	153" (12.75 ft or 3.9 m)
Weight	12,300 lbs (5580 kg) depending upon configuration
Hitch Weight	4,500 lbs (2041 kg) depending upon configuration
Cutting Capacity	2" (51 mm)
Minimum Tractor HP	200 hp (149 kW) ensure drawbar can support weight
Blade Tip Speed	16,300 ft/min (4970 m/min)
Blade Overlap	6" (152 mm)
Divider Gearbox Rating	350 hp (261 kW)
Down Box Rating	210 hp (157 kW)
Deck Thickness	.134" (10 ga) (3.4 mm)
Side Skirt Thickness	1/4" (6.4 mm)
Wing Operating Range	16 degrees down to 21 degrees up

Source: Schulte FX-530 page on schulte.ca.

Schulte wide-area cutter

Schulte FX-742

42 foot cutting width: the maker calls it the world’s largest rotary cutter.

42ftcutting width

118"transport width

250 hpmin. tractor

• 5-plex folding design for a 118” (3m) transport width
• Stump jumpers for pasture or fixed knives for crop residue
• Bondioli & Pavesi SFT drive and gearbox system
• Independent clutch protection for each down rotor
• Full rubber grommet suspension

Full specifications

Cutting Width	42ft (12.8m)
Overall Width	42.9ft (13.1m)
Overall Length	24.25ft (7.4m)
Cutting Height	2" - 16" (51mm - 406mm)
Transport Width	118" (3m)
Row Crop Wheel Trans. Width	146” (3.7m)
Transport Height	165" (13.75 ft or 4.2 m)
Weight	18,000lbs (8165 kg) depending upon configuration
Hitch Weight	6,500lbs (2950 kg) depending upon configuration
Cutting Capacity	2" (51mm)
Minimum Tractor HP	250 hp (186 kW) ensure drawbar can support weight
Blade Tip Speed	16,300 ft/min (4970 m/min)
Blade Overlap	6.5" (165mm)
Divider Gearbox Rating	350 hp (261 kW)
T Box Ratings	180 hp (134 kW)
Down Box Rating	210 hp (157 kW)
Deck Thickness	.134" (10 ga) (3.4mm)
Side Skirt Thickness	1/4" (6.4mm)
Inside Wing Operating Range	11° down to 13° up
Outside Wing Operating Range	8° down to 10° up

Source: Schulte FX-742 page on schulte.ca.

Schulte rock removal

Schulte 5000 Titan 2

Spend more time picking and less time dumping.

5 cu. yds.hopper

84”grate width

79”dumping height

• Super wide 7′ grate with wide or narrow spacing options
• 6.5 foot dump height for larger piles and truck loading
• 450 BHN steel teeth and T-iron tops
• Six inch larger reel than the original Titan

Full specifications

Hopper Capacity	5 cu. yds. (3.82 m 3)
Picking Width	84” (2134 mm) (grate width)
Dumping Height	79” (2007 mm)
Tractor HP	125 HP (93 kW)
Weight	8930 lbs. (4060 kg)
Rock Size	2” - 27” (5cm - 69cm)
Overall Length	255” (6477 mm)
Width with tires	159” (4038 mm)
Width less tires	127” (3226 mm)
Tire Size	22.5L x 6.1 x 14ply
Hydraulic motor displacement	62.7 cu. inch/rev (1027 ml)
Tractor Hydraulics	12 GPM@2200PSI, 4 remote outlets
Recommended Reel Speed	36 rpm

Source: Schulte 5000 Titan 2 page on schulte.ca.

Schulte rock removal

Schulte Giant 3500

Rugged 6’ wide reel type rock picker with a 3.5 cubic yard hopper.

3.5 cu.ydhopper

72”working width

75 HPmin. tractor

• Tapered T-iron grate with 1-1/2” thick teeth
• Batt tubing with 1/2” walls and 450 BHN hard surfaced teeth
• Floating grate protects against large immovable rocks
• Pivoting hitch pole for picking or transport position

Full specifications

Hopper Capacity	3.5 cu.yd (2.68 cu m)
Picking Width	72” (1,829mm)
Dumping Height	49” (1245mm)
Tractor HP	75 HP (56Kw)
Weight	6210 lbs (2,820 kgs)
Rock Size	2”-27” (5cm-69cm)
Overall Length	205” (5207 mm)
Transport Width	126” – 135” (3200 – 3430mm)
Overall Height	81” (2057mm)
Hitch Weight	1000lbs (454kgs)
Tire Size	16.5L X 16.5 (standard), 560/45R22.5 (large)
Tractor Hydraulics	12 GPM 1800 PSI Dual Remote
Recommended Reel Speed	36-37 RPM
Maximum Ground Speed	4 MPH (6.4 KPH)

Source: Schulte Giant 3500 page on schulte.ca.

Schulte rock removal

Schulte Giant 2500

Reel type rock picker with a large 2.5 cubic yard hopper.

2.5cubic yard hopper

60”picking width

75 HPmin. tractor

• Tapered T-iron grate with 1-1/2” thick teeth
• Wrap around, hard surfaced batt teeth
• Floating grate protects against large immovable rocks
• Large 16.5L X 16.1 flotation tires

Full specifications

Hopper Capacity	2.5 cubic yards (1.9 M³)
Picking Width	60” (1524 mm)
Dumping Height	49” (1245 mm)
Tractor HP	75 HP (56Kw)
Weight	4970 lbs (2254 Kg)
Rock Size	2” to 27”
Overall Length	205” (5207 mm)
Width with tires	114” (2896 mm)
Width less tires	91” (2311 mm)
Tire Size	16.5L X 16.1
Tractor Hydraulics	12 GPM @1800 PSI, dual remote outlets
Recommended Reel Speed	36-37 RPM
Maximum Ground Speed	4 MPH (6.4 KPH)

Source: Schulte Giant 2500 page on schulte.ca.

Schulte rock removal

Schulte RS-320 Jumbo

Conveyor type rock picker with a 3.2 cubic yard hopper.

3.2cu. yd. hopper

60"picking width

75 HPtractor

• Hopper twice the capacity of an average rock picker hopper, the maker says
• 48″ T-iron tapered grate sifts out soil before rocks reach the bucket
• Removes surface rock from 2 to 28 inches
• Standard built-in pivoting hitch

Full specifications

Hopper Capacity	3.2 cu. yds. (2.4 m3)
Picking Width	60" (1524 mm)
Dumping Height	45” (1140 mm)
Tractor HP	75 HP (56 kW)
Weight	5522 lbs. (2450 kg)
Rock Size	2 to 28 inches (50 to 700 mm) diameter
Overall Length	210” (5334 mm)
Width with tires	117” (2972 mm)
Width less tires	83” (2108 mm)
Overall Height	53” (1346 mm)
Tire Size	16.5L x 16.1
Hitch	Standard built-in pivoting hitch

Source: Schulte RS-320 Jumbo page on schulte.ca.

Schulte rock removal

Schulte Spartan RWP-1935

Rock raking and picking in one pass, with one operator and one tractor.

16’ – 19’working width

3.5 cu ydbucket

125 HPmin. tractor

• Working width adjusts on the fly
• Working depth down to 4.25” to dislodge partly buried stones
• Bucket dumps over 8 1/2’ high for truck boxes or high piles
• Separate hydraulic control of windrower and reel speeds
• Tandem walking axle for flotation

Full specifications

Hopper Capacity	3.5 cu yd (2.68 cu m)
Working Width	192” – 229” (4,877 – 5816mm)
Dumping Height	8’ 7” (2616mm)
Tractor HP	125 HP
Rock Size	2”-27” (5cm-69cm)
Overall Width	218” – 252” (5537 – 6654mm)
Overall Length	310” (7890mm)
Transport Height	122” (3100mm)
Hitch Weight	3520lbs (1600kgs)
Tire Size Windrowers	27 X 10.5-15 Skid Steer Tire
Tractor Hydraulics	16 GPM with two remotes
Recommended Reel Speed	40 RPM

Source: Schulte Spartan RWP-1935 page on schulte.ca.

Schulte rock removal

Schulte SRW-1400 / 1400-H

14 foot rock windrower that transports at 93” wide.

14 ft.drum width

93”transport width

40 - 150 hptractor

• Windrows 2” to 25” rocks into neat rows
• PTO driveline with slip clutch and shear bolt; SRW-1400-H is hydraulic
• Enclosed #100 drive chain
• Reversible, replaceable bolt-on 450 BHN teeth

Full specifications

Drum Width	14 ft. (4270 mm)
Tractor HP	40 - 150 hp (30 - 112 kw)
Weight	3500 lbs. (1588 kg)
Rock Size	2” to 25”
Drum Speed	117 rpm @ 540 rpm input
Maximum Ground Speed	5 mph (8 kph)
Recommended Ground Speed	2 mph (3 kph)
Tire Size	ST 205/90D-15, 8 ply Light Truck Tire
Transport Width	93” (2.36 M)
Transport Length	235” (5.97 M)
Hydraulic Drive Option Required Flow	15 GPM (57 LPM) Minimum

Source: Schulte SRW-1400/1400-H page on schulte.ca.

Schulte rock removal

Schulte SRW-1000

10 foot rock windrower, a smaller version of the SRW-1400.

10 ft.drum width

2660lbs. approx.

40 - 150 hptractor

• Windrows 2” to 25” rocks into neat rows
• PTO driveline with slip clutch and shear bolt
• Totally enclosed final drive chain
• Hard surfaced teeth welded to an 8 5/8 inch drum

Full specifications

Drum Width	10 ft. (3050 mm)
Tractor HP	40 - 150 hp (30 - 112 kw)
Weight	2660 lbs. (1206 kg)
Rock Size	2” to 25”
Drum Speed	117 rpm @ 540 rpm input
Maximum Ground Speed	5 mph (8 kph)
Recommended Ground Speed	2 mph (3 kph)
Tire Size	6.5 X 10, 10 ply forklift tires
Transport Width	134" (3.4 M)
Transport Length	179" (4.55 M)

Source: Schulte SRW-1000 page on schulte.ca.

Schulte rock removal

Schulte SRW-800

3-point rock rake with a narrow 8.5’ transport width.

88 5/8”drum width

1350lbs. approx.

35 hp to 100 hptractor

• Windrows 2” to 25” rocks into neat rows
• PTO driveline with slip clutch and shear bolt
• Totally enclosed final drive chain
• Hard surfaced teeth welded to the drum

Full specifications

Drum Width	88 5/8” (2215 mm)
Tractor HP	35 hp to 100 hp (30 - 60 kw)
Weight	1350 lbs. (613 kg)
Rock Size	2” to 25”
Drum Speed	102 rpm @ 540 input
Maximum Ground Speed	5 mph (8kph)
Recommended Ground Speed	2 mph (3 kph)
Tire Size	16.5/6.5 x 8
Transport Width	8.5’ (2591 mm)
Transport Length	67” (1702 mm)

Source: Schulte SRW-800 page on schulte.ca.

Schulte rock removal

Schulte SMR-800 Multi-Rake

Heavy duty skid steer landscape rake that rows up rocks.

89”drum width

18 - 35 gpmhydraulic flow

1900 lbsweight

• Rototilling action breaks lumps and roots and rows up rocks
• 4″ replaceable teeth of 450 hardened steel
• Chain drive keeps the hydraulic motor out of harm’s way
• Mount pivots up to 20 degrees left or right
• High or low flow hydraulic options

Full specifications

Drum Width	89” (2.26 m)
Hydraulic flow range	18 - 35 gpm (82 – 160 lpm)
Weight	1900 lbs (862 kg)
Drum Speed	220 - 250 rpm
Tire Size	23” forklift (58 cm)
Transport Width	102” ( 2.59 m)

Source: Schulte SMR-800 page on schulte.ca.

Schulte rock removal

Schulte SMR-600 Multi-Rake

6′ skid steer landscape rake and windrower.

73”drum width

18 - 35 gpmhydraulic flow

1600 lbsweight

• Breaks lumps, roots and debris and rows up rocks
• 4″ replaceable teeth of 450 hardened steel
• Chain drive keeps the hydraulic motor out of harm’s way
• Mount pivots up to 20 degrees left or right

Full specifications

Drum Width	73” (1.85 m)
Hydraulic flow range	18 - 35 gpm (81 – 160 lpm)
Weight	1600 lbs (725 kg)
Drum Speed	220-250 rpm
Tire Size	23” forklift (58 cm)
Transport Width	88” (2.23 m)

Source: Schulte SMR-600 page on schulte.ca.

Schulte snow blower

Schulte SBX-87

87.5” snow blower for skid steers, with a 3pt version for tractors.

87.5”cutting width

22”fan

132 / 415tons/hr dry / wet

• Works with all popular skid steers; 3pt version available
• Replaceable cutting edge and adjustable skid shoes
• Larger chute for a further throw than previous models
• Motors sized to match skid steer flows

Full specifications

Cutting Width	87.5” (2.2m)
Tractor Horsepower	40-55HP (34-40kw)
Cutting Height	26” (.66m)
Overall Height	63.5” (1.6m)
Auger Diameter	16” (40.7cm)
Fan Diameter	22” (55.9cm)
Fan Type	4 paddle
Fan Shaft Diameter	1 3/8” (3.5cm)
Auger Drive Chain	#60
Weight	813lbs (369kg) (3pt model) / 933lbs (423kg) (skid steer model)
Hydraulic Chute Rotation	Standard
Replaceable Blade	Standard
Adjustable Skid Shoes	Standard
Capacity - Dry Snow / Wet Snow	132tons/hr / 415tons/hr

Source: Schulte SBX-87 page on schulte.ca.

Schulte snow blower

Schulte SDX-102

102” wide twin stage snow blower for 85-140 HP tractors.

102”cutting width

30”four paddle fan

540RPM PTO

• Open center, cupped four paddle fan
• Reinforced auger breaks up ice and hard packed snow
• 300 degree rotating chute with UHMW bearing area
• Shear bolt protection for the fan and cross auger

Full specifications

Cutting Width	102” (2.59m)
Tractor Horsepower	85 - 140 HP (63 - 104KW)
Cutting Height	35” (889mm)
Overall Height	96” (2.44m)
Auger Diameter	23” (584mm)
Fan Diameter	30” (762mm)
Fan Type	4 paddle
Fan Shaft Diameter	1 5/8” (41mm)
Auger Drive Chain	#80
Weight	1675lbs (760kg)
Hitch Size	Cat II, Cat II quick hitch
PTO Speed	540 RPM
Capacity - Dry Snow / Wet Snow	388 tons/hr / 1222 tons/hr

Source: Schulte SDX-102 page on schulte.ca.

Schulte snow blower

Schulte SDX-117

117” snow blower with a 38” five paddle fan and 1000 RPM gear drive.

117”cutting width

38”five paddle fan

1000RPM PTO

• 1000 RPM gear driven drive system
• Bondioli one piece gearbox and size 8 power shaft
• Reinforced 23” bottom auger
• Double deflector design reduces blowback
• Optional gauge wheels for pavement use

Full specifications

Cutting Width	117” (2.97m)
Tractor Horsepower	140 - 220 HP (104 - 164 kW)
Cutting Height	45 1/2” (1.15m)
Overall Height	100” (2.54m) (With HD Chute)
Auger Diameter	23” (58.4cm) bottom, 14” (35.5cm) top
Fan Diameter	38” (96.5cm)
Fan Type	5 paddle
Fan Shaft Diameter	2” (5.1cm)
Auger Drive Chain	#80
Weight	2750lbs (1247kg)
Hitch Size	Cat II & Cat III 3pt and quick hitch
PTO Speed	1000 RPM
Capacity - Dry Snow / Wet Snow	762tons/hr / 2394tons/hr

Source: Schulte SDX-117 page on schulte.ca.

Schulte snow blower

Schulte RDX-117

117” snow blower with a rotating drum that throws left, right or through the center chute.

117”cutting width

38”five paddle fan

2633tons/hr wet snow

• Rotating drum ejects snow left, right or through the center chute
• 1000 RPM gear driven drive system
• Large open bottom auger cuts into hard pack snow
• Hydraulic chute deflector cylinder standard

Full specifications

Cutting Width	117” (2.97m)
Tractor Horsepower	140 - 220 HP (104 - 164 KW)
Cutting Height	45 1/2” (1.15m)
Overall Height	100” (2.54m) (With HD Chute)
Auger Diameter	23” (58.4cm) bottom, 14” (35.5cm) top
Fan Diameter	38” (96.5cm)
Fan Type	5 paddle
Fan Shaft Diameter	2” (5.1cm)
Auger Drive Chain	#80
Weight	3085lbs (1400kg)
Hitch Size	Cat II & Cat III 3pt and quick hitch
PTO Speed	1000 RPM
Capacity - Dry Snow / Wet Snow	762tons/hr / 2633tons/hr

Source: Schulte RDX-117 page on schulte.ca.

Schulte snow blower

Schulte SDX-144

144” snow blower for 180 – 350 hp tractors.

144”cutting width

180 - 350HP tractors

1000RPM PTO

• 38” five paddle open center fan
• Bondioli G9 driveline and gearbox, clockwise or counterclockwise
• 23” bottom auger with serrated teeth
• Reversible, replaceable cutting blade
• Enclosed chain case

Full specifications

Cutting Width	144” (3.66m)
Tractor Horsepower	180 - 350 HP (132 - 261 KW)
Cutting Height	45 1/2” (1.15m)
Overall Height	100” (2.54m) (With HD Chute)
Auger Diameter	23” (58.4cm) bottom, 14” (35.5cm) top
Fan Type	5 paddle
Fan Shaft Diameter	2” (5.1cm)
Auger Drive Chain	#80
Weight	3066 lbs (1391kg)
Hitch Size	Cat III & Cat IV 3pt and quick hitch
PTO Speed	1000 RPM
Capacity - Dry Snow / Wet Snow	762tons/hr/2394tons/hr

Source: Schulte SDX-144 page on schulte.ca.

Schulte snow blower

Schulte FM-115 front mount frame

Mounts a Schulte 3pt snow blower on the front of tractors up to 115 HP.

115 HPmax. tractor

5000 lbslift capacity

540RPM PTO

• Blow snow while driving forward
• Better visibility and ergonomics than a rear mount
• More forward gears to choose from than reverse
• Not compatible with tractors equipped with Super-Steer

Full specifications

Tractor Horsepower	55 HP (41 kw) for SDX-840, 85 HP (63kw) for SDX-102, RDX-102 (minimum); 115 HP (86 kw) (maximum)
Tractor Hydraulic Requirement	3 remote circuits with a minimum total hydraulic output of 10 GPM at 1200 PSI.
PTO Speed	540 RPM
Lift capacity	5000 lbs (2268 kg)
Adjustability	Fits tractors between 111.5” (2.8m) & 164.5” (4.2m) from front mount plate to drawbar pin
Nominal ground clearance	10”(25 cm) depending on tractor installation
Nominal lift range	18” (45.7cm)
Weight	1400 lbs (636kg)

Source: Schulte FM-115 page on schulte.ca.

Schulte snow blower

Schulte FM-350 front mount frame

Front mount frame for Schulte 3pt snow blowers on tractors up to 250HP.

250HPmax. tractor

5000 lbslift capacity

18”lift range

• Blow snow while driving forward
• Better visibility and ergonomics than a rear mount
• Available without a drive train for blades
• Not compatible with tractors equipped with Super-Steer

Full specifications

Tractor Horsepower	250HP max
PTO Speed	1000 RPM for SDX/RDX117 and SDX/RDX102, 540 RPM for SDX/RDX102 only
Lift capacity	5000 lbs
Adjustability	Accommodates tractors between 151” and 211” measured from front mount plate to drawbar pin
Nominal ground clearance	13” depending on tractor installation
Nominal lift range	18”
Weight	1650 lbs

Source: Schulte FM-350 page on schulte.ca.

Nothing matches those filters. Clear filters

Built into Schulte rotary cutters

• 

  01Single domed deck

  A continuously welded, single domed deck is easy to clean, sheds debris and stops water pooling and rust, the maker says.

• 

  02Deck protection rings

  Many Schulte cutters list deck protection rings as standard. They keep rising blades from striking the deck.

• 

  03Super Suction blades

  GX cutters, the FX-214 and the FX-320 use Schulte Super Suction blades with 6 to 6.5 in of overlap for grass lift and a clean cut.

Options

Schulte lists these options and add-ons for its cutters. Not every option fits every model, so ask which ones suit the machine you are looking at.

• 

  FLX-1510 Flex-Arm

  Lets the tractor travel on the road while a Schulte 10 or 15 foot cutter mows the ditch slope, so the tractor stays off the slope.

  Schulte 10’ and 15’ cutters

• 

  Fixed Knife Technology

  Stationary knives under the deck shatter corn and other crop residue, and baffle plates spread it evenly. The knives can be removed to cut grass.

  FX-318, TPX-318, FX-320, FX-520, 5026, FX-530, FX-742

• 

  Cutter Command monitoring

  An in-cab system that tracks gearbox speed and oil temperature, logs working hours and gives service reminders.

  XH-1500 Series 5

Also available

• Pro Level Hitch

  Offered as a hitch option on several flex-wing cutters, including the GX-150, FX-214, FX-320 and XH-1500.

• Cyclone Deck Debris Fan Kit

  Helps keep the cutter deck clear of debris and straw; listed for the FX-530.

• Belting and chains

  Front or rear half belting and optional double chains are listed for several cutters.

• Snow blower gauge wheels

  Optional gauge wheels with tapered roller bearings for highway or pavement use on the SDX-117 and SDX-144.