Pequea Hay Tedder, Rake and Spreader Dealer in Central New York

Name: Clinton Tractor & Implement Co.
Address: 31 Meadow St, Clinton, NY, 13323, US
Telephone: (315) 853-6151

Pequea builds hay tedders, rakes and spreaders in New Holland, Pennsylvania. Clinton Tractor is a Pequea dealer in Clinton, NY, serving hay and livestock farms across Central New York.

Call (315) 853-6151 Compare models

31 Meadow St, Clinton, NY 13323
Mon–Fri 7–5, Sat 7–12
(315) 853-6151

Turbo tedders

Pequea's heavy-duty rotary tedders: seven asymmetrical tines per rotor on pipe arms, with hydraulic fold and tilt. Choose from four to eight rotors.

Pequea HT810135′ working width · 8 rotors · 65 hp PTO power
Pequea HT620226′ 6″ working width · 6 rotors · 50 hp PTO power
Pequea HT610226′ 6″ working width · 6 rotors · 50 hp PTO power
Pequea HT410218′ 2″ working width · 4 rotors · 30 hp PTO power

X Series and Fluffer tedders

Pequea says its X Series rotary tedders are a reliable tedding solution at a value price without cutting features. Fluffer tedders lift and release hay to aerate it just before baling or chopping.

Pequea 26X9′ 7″ working width · 2 rotors · 700 lb weight
Pequea 46X17′ 4″ working width · 4 rotors · 30 hp PTO power
Pequea 66X25′ 5″ working width · 6 rotors · 50 hp PTO power
Pequea 7107′ working width · 8 reel settings
Pequea 9109′ working width · 8 reel settings

Hay rakes

Single-rotor rakes for small to mid-size farms and wheel rakes for fast raking of dry hay. All are made in New Holland, PA.

Pequea HR9399′ raking width · 30 hp PTO power · 1,050 lbs. weight
Pequea HR114011′ raking width · 40 hp PTO power · 1,550 lb weight
Pequea MCR17′ – 23′ working width · 8, 10 or 12 rake wheels
Pequea 1820HD Windrow Pro29′ raking width · 17 rake wheels · 5,450 lb weight

Manure spreaders

PTO box spreaders from 125 to 250 bushels, plus the VHS vertical or horizontal beater spreader for big farms.

Pequea 125P90 cu. ft. struck · 35 hp minimum · 1,850 lb weight
Pequea 175P108 cu. ft. struck · 45 hp minimum · 2,220 lb weight
Pequea 250P128 cu. ft. struck · 55 hp minimum · 2,620 lb weight
Pequea VHS-600 / VHS-900400 / 600 cu. ft. struck · 150 hp minimum PTO · 34,000 lb carrying capacity

Litter, lime and fertilizer spreaders

Poultry litter spreaders in the SP Series, lime spreaders carrying six or ten tons, and the SF5 belt spreader for rows up to 20 feet wide.

Pequea SP40016.7 cu. yd. heaped · 20,000 lb payload
Pequea SP45018.1 cu. yd. heaped · 20,500 lb payload
Pequea SP50019.6 cu. yd. heaped · 24,000 lb payload
Pequea SP55021.5 cu. yd. heaped · 27,000 lb payload
Pequea SL66 ton payload · 140 cu. ft. capacity
Pequea SL1010 ton payload · 240 cu. ft. capacity
Pequea SF510′ – 20′ spread width · 5 ton payload · 50 hp required

Pequea history

Pequea was founded by a local Amish farmer who wanted to dry his hay quicker. He built a fluffer tedder on his farm along Pequea Creek in Gordonville, Lancaster County, Pennsylvania.

Dennis Skibo came to run sales and marketing in 1990 and bought the company in 1992. Pequea says it has grown from a small company with local customers to a mid-size company with dealers and distributors throughout North America and parts of Europe.

1990Dennis Skibo joins Pequea to run sales and marketing.
1992Mr. Skibo buys the company.
2001Pequea moves into its present 100,000 square foot plant in New Holland, PA.

Compare Pequea implements

Search all 24 Pequea tedders, rakes and spreaders by line, name or feature.

Showing all 24 models

Turbo tedder

Pequea HT8101

Pequea's largest rotary tedder, with a transport cart and hydraulic fold and tilt.

35′working width

8rotors

65 hpPTO power

Seven tine arms per rotor with asymmetrical tines
Hydraulic fold and tilt are standard
Transport cart with built-in suspension and airplane tires
Automatic transport locks keep the wheels from swiveling on the road

Full specifications

Working width	35′
Outside tine width	34’6″
Transport width	11′ 6″ Carted
Overall length	19′ 4″
Number of rotors	8
Tine arms per rotor	7
Linkage	Trailed
Rotor tire	18.5 x 8
Weight	3,700 lb
Hydraulic requirement	1,350 psi
PTO power requirement	65 hp
Rotor gearbox	Enclosed Grease
Center gearbox	Oil Bath
Tine arm material	1″ Schedule 80 Pipe
Transport lights	Optional

Source: Pequea HT8101 page.

Turbo tedder

Pequea HT6202

A six-rotor tedder with a 26′ 6″ working width and T-Flex rubber torsion suspension.

26′ 6″working width

6rotors

50 hpPTO power

T-Flex rubber torsion suspension under the center two rotors
Hydraulic fold and tilt are standard
Seven asymmetrical tines per rotor on pipe arms
9′ 8″ overall transport length

Full specifications

Working width	26′ 6″
Outside tine width	26′ 2″
Transport width	9′ 2″
Transport height	10′ 6″
Overall length	9′ 8″
Number of rotors	6
Tine arms per rotor	7
Linkage	Trailed
Rotor tire	18.5 x 8
Weight	2,350 lb
Hydraulic requirement	1,700 psi
PTO power requirement	50 hp
Rotor gearbox	Enclosed Grease
Center gearbox	Oil Bath
Tine arm material	1″ Schedule 80 Pipe
Transport lights	Optional

Source: Pequea HT6202 page.

Turbo tedder

Pequea HT6102

The same 26′ 6″ working width as the HT6202, on a transport cart for quick travel between fields.

26′ 6″working width

6rotors

50 hpPTO power

Transport cart with built-in suspension
Airplane tires keep the machine balanced
Automatic transport locks
Hydraulic fold and tilt are standard

Full specifications

Working width	26′ 6″
Outside tine width	26′ 2″
Transport width	11′ Carted
Overall length	17′ 3″
Number of rotors	6
Tine arms per rotor	7
Linkage	Trailed
Rotor tire	18.5 x 8
Weight	3,100 lb
Hydraulic requirement	1,200 psi
PTO power requirement	50 hp
Rotor gearbox	Enclosed Grease
Center gearbox	Oil Bath
Tine arm material	1″ Schedule 80 Pipe
Transport lights	Optional

Source: Pequea HT6102 page.

Turbo tedder

Pequea HT4102

A four-rotor tedder with an 18′ 2″ working width that folds over center, with no ropes or latches.

18′ 2″working width

4rotors

30 hpPTO power

Folds over center, so no ropes or latches
One fold cylinder on each side
Hydraulic manifold next to the front tilt cylinder
Four-bolt hubs with tapered bearings

Full specifications

Working width	18′ 2″
Outside tine width	17′ 10″
Transport width	9′ 2″
Overall length	9′ 8″
Number of rotors	4
Tine arms per rotor	7
Linkage	Trailed
Rotor tire	18.5 x 8
Weight	1,424 lb
Hydraulic requirement	1,520 psi
PTO power requirement	30 hp
Rotor gearbox	Enclosed Grease
Center gearbox	Oil Bath
Tine arm material	1″ Schedule 80 Pipe
Transport lights	N/A

Source: Pequea HT4102 page.

X Series or Fluffer tedder

Pequea 26X

A compact two-rotor tedder at an affordable price.

9′ 7″working width

2rotors

700 lbweight

Six flat bar tine arms per rotor
Hydraulic fold and tilt are standard
Four-bolt hubs with tapered bearings
Oil-bath gearboxes and a hexagonal drive shaft

Full specifications

Working width	9′ 7″
Outside tine width	9′ 3″
Tine arms per rotor	6
Number of rotors	2
Rotor tire	18.5 x 8
Weight	700 lb
Hydraulic tilt	Standard
Rotor gearbox	Enclosed Grease
Center gearbox	Enclosed Oil Bath
Tine arm material	.5 X 1.5″ Flat Bar

Source: Pequea 26X page.

X Series or Fluffer tedder

Pequea 46X

A four-rotor tedder for larger fields, with forged finger drives that stay engaged when folded.

17′ 4″working width

4rotors

30 hpPTO power

Six flat bar tine arms per rotor
Forged, carbo-austempered finger drives
Hydraulic fold and tilt are standard
18.5 x 8 tires on four-bolt hubs

Full specifications

Working width	17′ 4″
Outside tine width	17′
Transport width	9′ 2″
Overall length	9′ 8″
Number of rotors	4
Tine arms per rotor	6
Linkage	Trailed
Rotor tire	18.5 x 8
Weight	1,050 lb
Hydraulic requirement	1,500 psi
PTO power requirement	30 hp
Rotor gearbox	Enclosed Grease
Center gearbox	Oil Bath
Tine arm material	.5 inch Steel Flatbar
Transport lights	N/A

Source: Pequea 46X page.

X Series or Fluffer tedder

Pequea 66X

The widest X Series tedder, with six rotors and a 25′ 5″ working width.

25′ 5″working width

6rotors

50 hpPTO power

Six rotors on 18.5 x 8 tires
Needs two hydraulic remotes
Forged steel finger drives at the pivot points
Standard hydraulic fold and tilt

Full specifications

Working width	25′ 5″
Outside tine width	24′ 11″
Transport width	11′ 2″
Overall length	9′ 8″
Number of rotors	6
Tine arms per rotor	6
Linkage	Trailed
Rotor tire	18.5 x 8
Weight	1,900 lb
Hydraulic requirement	1,800 psi
PTO power requirement	50 hp
Rotor gearbox	Enclosed Grease
Center gearbox	Oil Bath
Tine arm material	.5 inch Steel Flatbar
Hydraulic remotes needed	2

Source: Pequea 66X page.

X Series or Fluffer tedder

Pequea 710

A hay fluffer that lifts and releases hay to protect leaves, with a 7′ tedding width.

7′working width

8reel settings

Ground drive or PTO drive
Eight adjustable reel settings
Rubber-mounted finger action
Cam mechanism adjusts the tine angle as the bars turn

Full specifications

Working width	7′
Drive	Ground drive or PTO
Reel settings	8 adjustable
Belt drive	Double belt
Finger action	Rubber mounted

Source: Pequea 710 page.

X Series or Fluffer tedder

Pequea 910

The wider hay fluffer, with a 9′ tedding width for aerating hay just before baling or chopping.

9′working width

8reel settings

Ground drive or PTO drive
Eight adjustable reel settings
Rubber-mounted finger action
Gentle lift and release limits leaf damage

Full specifications

Working width	9′
Drive	Ground drive or PTO
Reel settings	8 adjustable
Belt drive	Double belt
Finger action	Rubber mounted

Source: Pequea 910 page.

Hay rake

Pequea HR939

The smallest rotary rake: a single rotor with a 9′ clean sweep, for small and mid-size farms.

9′raking width

30 hpPTO power

1,050 lbs.weight

Two walking beams and a lift cylinder
Tandem bogie axle for rougher fields
Easy-adjust curtain
Pitch set with the crank on the front lift cylinder

Full specifications

Working width	10′ 8″
Raking width	9′
Transport width	9′ 4″
Gearbox	Enclosed Oil Bath
Gear reduction	7.9:1
Number of rotors	1
Tine arms per rotor	9
Double tines per arm	3
PTO power requirement	30 HP – 540 RPM
Hydraulic requirement	6 GPM / 1200 psi
Direction of raking action	Left
Weight	1,050 lbs.
Axle	Walking Beams
Tire and wheel	18.5 x 8 Flotation Tire on 4 Bolt Painted Steel Rim

Source: Pequea HR939 page.

Hay rake

Pequea HR1140

A single-rotor rake with an 11′ clean sweep and removable tine arms for transport and storage.

11′raking width

40 hpPTO power

1,550lb weight

Tilt cylinder, lift cylinder and walking beams
Removable tine arms
18.5 x 8 flotation tires are standard
Easy-adjust curtain

Full specifications

Working width	13′
Raking width	11′
Transport width	76″
Overall length	13′ 6″
Gearbox	Enclosed Oil Bath
Gear reduction	7.9:1
Number of rotors	1
Tine arms per rotor	11
Double tines per arm	4
PTO power requirement	40 HP – 540 RPM
Hydraulic requirement	6 GPM – 1200 psi
Direction of raking action	Left
Weight	1,550
Axle	Walking Beams
Tire and wheel	18.5 x 8 Flotation Tire on 4 Bolt Painted Steel Rim

Source: Pequea HR1140 page.

Hay rake

Pequea MCR

A carted wheel rake that converts from 8 wheels to 10 or 12 with bolt-on extensions.

17′ – 23′working width

8, 10 or 12rake wheels

Individual compression spring on every wheel arm
Windrow width adjusts on the go with the hydraulic beam option
Single-sided raking available
Hydraulic 55″ kicker wheel option

Full specifications

Number of rake wheels	8 / 10 / 12
Wheel diameter	55″
Tines per wheel	40
Tine diameter	.283″ (7.2mm)
Overall length	21′ / 23′ / 25′
Transport height	8′ 3″ / 8′ 10″ / 9′ 5″
Transport width	12’2″
Tires	(2) 205/75 D15
Working width	17′ – 19′ / 19′ – 21′ / 21′ – 23′
Windrow width	3′ – 5′
Pressure requirements	1200 psi – 1400 psi
Hydraulic requirements	1 SCV Standard (2 with Hydraulic Wheel Beam Option)

Source: Pequea MCR page.

Hay rake

Pequea 1820HD Windrow Pro

An overhead-frame, crop-driven wheel rake that gathers up to 29′ of hay into one windrow.

29′raking width

17rake wheels

5,450 lbweight

Double tines in rubber handles treat the crop gently
All controls from the tractor seat
Adjustable wheel beam angle
Anti hay wrap is standard

Full specifications

Number of wheels	17 (52″ Diameter)
Rake tines	18 Rubber Mounted Double Tines (36 Teeth)
Rake wheel hubs	Heavy Duty Tapered Bearings (2 Sets per Wheel)
Anti hay wrap	Standard
Axles	Heavy Duty Walking Beams with 2″ Removable Spindles
Tires	9.5L – 15 Implement Tires
Raking width	29′
Transport width	12′ 4″
Hydraulic requirement	4 GPM
Hydraulic system	Closed Center (Open Center Optional)
Controls	Electric over Hydraulics
Weight	5,450 lb

Source: Pequea 1820HD page.

Manure spreader

Pequea 125P

A 125 bushel PTO box spreader for small and mid-size farms.

90 cu. ft.struck

35 hpminimum

1,850 lbweight

Fully welded 10 gauge high strength steel box
Two-speed gearbox with neutral and cleanout settings
Eight replaceable beater paddles
Options: fine spread pan, top beaters, hydraulic end gate

Full specifications

Struck capacity	90 cu. ft.
Heaped (old rating) capacity	125 Bu.
Overall length	16′ 6″
Overall width	80″
Loading height	45″
Box length	128″
Floor construction	High Density Poly Vinyl 3/4″ Tongue & Groove
Beater paddles	8 Replaceable
Beater diameter	26″
Drive	PTO with 2 Speed Gearbox
Weight	1,850 lb
Minimum HP required	35 HP
Floor speed (low / high)	3.2 ft/min / 6.4 ft/min

Source: Pequea 125P page.

Manure spreader

Pequea 175P

A 175 bushel PTO box spreader with ten replaceable beater paddles.

108 cu. ft.struck

45 hpminimum

2,220 lbweight

Fully welded 10 gauge high strength steel box
Poly floor that Pequea says never wears out
Ten removable beater paddles
Two-speed gearbox with neutral and cleanout settings

Full specifications

Struck capacity	108 cu. ft.
Heaped (old rating) capacity	175 Bu.
Overall length	17′ 8″
Overall width	91″
Loading height	44″
Box length	140″
Floor construction	High Density Poly Vinyl 3/4″ Tongue & Groove
Beater paddles	10 Replaceable
Beater diameter	26″
Drive	PTO with 2 Speed Gearbox
Weight	2,220 lb
Minimum HP required	45 HP
Floor speed (low / high)	3.2 ft/min / 6.4 ft/min

Source: Pequea 175P page.

Manure spreader

Pequea 250P

The largest box spreader, at 250 bushels, with an optional tandem axle for heavy loads.

128 cu. ft.struck

55 hpminimum

2,620 lbweight

Optional tandem axle for rough ground and wet fields
Optional fine spread pan on all models
Ten replaceable beater paddles
Options: top beaters, hydraulic end gate

Full specifications

Struck capacity	128 cu. ft.
Heaped (old rating) capacity	250 Bu.
Overall length	20′ 5″
Overall width	98″
Loading height	44″
Box length	160″
Floor construction	High Density Poly Vinyl 3/4″ Tongue & Groove
Beater paddles	10 Replaceable
Beater diameter	26″
Drive	PTO with 2 Speed Gearbox
Weight	2,620 lb
Minimum HP required	55 HP
Floor speed (low / high)	3.2 ft/min / 6.4 ft/min

Source: Pequea 250P page.

Manure spreader

Pequea VHS-600 / VHS-900

Large vertical or horizontal beater manure spreaders with a 30-inch beater, built from Cor-Ten steel.

400 / 600cu. ft. struck

150 hpminimum PTO

34,000 lbcarrying capacity

Cor-Ten steel hopper box
30-inch beater at 420 rpm
Infinite floor speed, 0-15 ft/min
Reversible floor chain is standard

Full specifications

Overall length	VHS600 – 27′ 11″ / VHS900 – 35′ 11″
Overall width	9′ 4″
Main box length	VHS600 – 18′ / VHS900 – 26′
Carrying capacity	34,000 lb
Struck capacity	VHS600 14.8 cu yd/400 cu ft / VHS900 22.2 cu yd/600 cu ft
Heaped capacity	VHS600 22.2 cu yd/605 cu ft / VHS900 33.3 cu yd/900 cu ft
PTO rpm	Slip Clutch 1000 rpm 1-3/8″ Spline
Beater diameter	30″
Beater rpm	420 rpm
Adjustable floor speed	Infinite 0-15 ft/min
Hopper box construction	Cor-Ten Steel
Hydraulic requirements	10 GPM at 2000 psi
Minimum PTO HP	150 Min. HP
Axle	Dual Tandem w/ Walking Beam
Tire	560/60R 22.5
Empty weight	VHS600 13,300 lb / VHS900 14,700 lb

Source: Pequea VHS page.

Dry material spreader

Pequea SP400

The base SP Series litter spreader, with a 16′ hopper and up to 580 cubic feet of hauling capacity in the series.

16.7 cu. yd.heaped

20,000 lbpayload

Hopper lengths of 16′, 18′, 20′ and 22′ in the SP Series
Hydraulic flow controls for floor and spinner speeds
Heavy duty 88K floor chain on poly tongue and groove floor
25-inch spinner discs, adjustable spinners

Full specifications

Hopper length	16′
Hopper width (top)	96″
Overall length	26′
Overall width	97″
Struck capacity	10.7 cu. yd.
Heaped capacity	16.7 cu. yd.
Payload	20,000 lb
Empty weight	6,000 lb
Chain width	35″
Heavy duty tandem axle	Standard
Floor	3/4″ x 6″ Tongue and Groove Poly Floor
Chain	Heavy Duty 88K
Spinner disc diameter	25″

Source: Pequea SP400 page.

Dry material spreader

Pequea SP450

An 18′ hopper SP Series spreader with a heaped capacity of 18.1 cubic yards.

18.1 cu. yd.heaped

20,500 lbpayload

Hopper lengths of 16′, 18′, 20′ and 22′ in the SP Series
Hydraulic flow controls for floor and spinner speeds
Heavy duty 88K floor chain on poly tongue and groove floor
25-inch spinner discs, adjustable spinners

Full specifications

Hopper length	18′
Hopper width (top)	96″
Overall length	28′
Overall width	97″
Struck capacity	13.3 cu. yd.
Heaped capacity	18.1 cu. yd.
Payload	20,500 lb
Empty weight	6,200 lb
Chain width	35″
Heavy duty tandem axle	Standard
Floor	3/4″ x 6″ Tongue and Groove Poly Floor
Chain	Heavy Duty 88K
Spinner disc diameter	25″

Source: Pequea SP450 page.

Dry material spreader

Pequea SP500

A 20′ hopper SP Series spreader with a 24,000 pound payload.

19.6 cu. yd.heaped

24,000 lbpayload

Hopper lengths of 16′, 18′, 20′ and 22′ in the SP Series
Hydraulic flow controls for floor and spinner speeds
Heavy duty 88K floor chain on poly tongue and groove floor
25-inch spinner discs, adjustable spinners

Full specifications

Hopper length	20′
Hopper width (top)	96″
Overall length	30′
Overall width	98″
Struck capacity	14.8 cu. yd.
Heaped capacity	19.6 cu. yd.
Payload	24,000 lb
Empty weight	6,400 lb
Chain width	35″
Heavy duty tandem axle	Standard
Floor	3/4″ x 6″ Tongue and Groove Poly Floor
Chain	Heavy Duty 88K
Spinner disc diameter	25″

Source: Pequea SP500 page.

Dry material spreader

Pequea SP550

The longest SP Series spreader, with a 22′ hopper and 27,000 pound payload.

21.5 cu. yd.heaped

27,000 lbpayload

Hopper lengths of 16′, 18′, 20′ and 22′ in the SP Series
Hydraulic flow controls for floor and spinner speeds
Heavy duty 88K floor chain on poly tongue and groove floor
25-inch spinner discs, adjustable spinners

Full specifications

Hopper length	22′
Hopper width (top)	96″
Overall length	32′
Overall width	99″
Struck capacity	16.6 cu. yd.
Heaped capacity	21.5 cu. yd.
Payload	27,000 lb
Empty weight	6,600 lb
Chain width	35″
Heavy duty tandem axle	Standard
Floor	3/4″ x 6″ Tongue and Groove Poly Floor
Chain	Heavy Duty 88K
Spinner disc diameter	25″

Source: Pequea SP550 page.

Dry material spreader

Pequea SL6

A compact six-ton lime spreader with variable hydraulic web and spinner controls.

6 tonpayload

140 cu. ft.capacity

Variable hydraulic web and spinner controls
Heavy-duty tandem walking beams
Digi-Star automated rate controller is optional
667X chain on a poly tongue and groove floor

Full specifications

Overall length	17′ 11″
Overall width	73″
Overall height	81″
Hopper length	9′
Hopper width (top)	70″
Floor width	24″
Capacity	140 CU. FT.
Payload	6 ton (12,000 lb)
Empty weight	4,000 lb
Flow control	Adjustable Flow Control for Conveyors and Spinners
Floor and chain	667X Chain on 3/4″ Poly Tongue and Groove Floor
Axle	Heavy Duty Tandem Walking Beam
Tire and wheel	12.5L x 15 10 Ply
Spinner disc diameter	25″

Source: Pequea SL6 page.

Dry material spreader

Pequea SL10

Pequea's highest-capacity lime spreader, carrying up to ten tons.

10 tonpayload

240 cu. ft.capacity

Electronic floor shut-off is standard
Optional 304 stainless steel hopper and spinner
Digi-Star automated rate controller is optional
Heavy duty 88K chain on a poly tongue and groove floor

Full specifications

Overall length	20′
Overall width	96″
Overall height	92″
Hopper length	11′
Hopper width (top)	75″
Floor width	32″
Capacity	240 CU. FT.
Payload	10 ton (20,000 lb)
Empty weight	6,000 lb
Flow control	Adjustable Flow Control for Conveyors and Spinners
Floor and chain	Heavy Duty 88K Chain on 3/4″ Poly Tongue and Groove Floor
Axle	Tandem Heavy Duty Walking Beam
Tire and wheel	21.5L-16.1SL x 10 Ply
Spinner disc diameter	25″

Source: Pequea SL10 page.

Dry material spreader

Pequea SF5

A conveyor-belt fertilizer spreader for row crops, orchards and vineyards, with a 10′ to 20′ spread width.

10′ – 20′spread width

5 tonpayload

50 hprequired

Rear conveyor expands and contracts for different row widths
Break-away pivot rotates if the conveyor hits a tree or post
PTO-driven hydraulic pump
Stainless-steel mesh floor

Full specifications

Payload	10,000lbs (5 Ton)
Empty weight	3,600lbs
Hydraulics	PTO Pump
Floor and chain	3/4” SS Mesh
Axle	Single Axle
Tire and wheel	21.5L x 16.1
Attachments	Adjustable Width Conveyor With Break-Away Pivot
Overall height	76″
Overall width	128″
Overall length	174”
Hopper width (top)	72”
Hopper length	10’ (120”)
Floor width	12”
Struck capacity	4.5 Cu yd
Heaped capacity	5.2 Cu yd
Power requirements	50HP

Source: Pequea SF5 page.

Turbo tedders at a glance

Model	HT8101	HT6202	HT6102	HT4102
Working width	35′	26′ 6″	26′ 6″	18′ 2″
Number of rotors	8	6	6	4
Transport width	11′ 6″ Carted	9′ 2″	11′ Carted	9′ 2″
PTO power requirement	65 hp	50 hp	50 hp	30 hp
Weight	3,700 lb	2,350 lb	3,100 lb	1,424 lb

X Series and Fluffer tedders at a glance

Model	26X	46X	66X	710	910
Working width	9′ 7″	17′ 4″	25′ 5″	7′	9′
Number of rotors	2	4	6	–	–
Weight	700 lb	1,050 lb	1,900 lb	–	–

Hay rakes at a glance

Model	HR939	HR1140	MCR	1820HD Windrow Pro
Working width	10′ 8″	13′	17′ – 19′ / 19′ – 21′ / 21′ – 23′	–
Raking width	9′	11′	–	29′
Transport width	9′ 4″	76″	12’2″	12′ 4″
Weight	1,050 lbs.	1,550	–	5,450 lb

Manure spreaders at a glance

Model	125P	175P	250P	VHS-600 / VHS-900
Struck capacity	90 cu. ft.	108 cu. ft.	128 cu. ft.	VHS600 14.8 cu yd/400 cu ft / VHS900 22.2 cu yd/600 cu ft
Overall length	16′ 6″	17′ 8″	20′ 5″	VHS600 – 27′ 11″ / VHS900 – 35′ 11″
Beater diameter	26″	26″	26″	30″
Weight	1,850 lb	2,220 lb	2,620 lb	–

Litter, lime and fertilizer spreaders at a glance

Model	SP400	SP450	SP500	SP550	SL6	SL10	SF5
Payload	20,000 lb	20,500 lb	24,000 lb	27,000 lb	6 ton (12,000 lb)	10 ton (20,000 lb)	10,000lbs (5 Ton)
Empty weight	6,000 lb	6,200 lb	6,400 lb	6,600 lb	4,000 lb	6,000 lb	3,600lbs
Overall length	26′	28′	30′	32′	17′ 11″	20′	174”
Overall width	97″	97″	98″	99″	73″	96″	128″

Genuine Pequea parts

Pequea posts operation and parts manuals for each machine on its Parts & Service page, and supports its dealer network with replacement parts. Bring your model and serial number to the Clinton Tractor parts counter and we will order the genuine Pequea part.

Tine arms
Rotor gearboxes
Finger drives
Wheel hubs and bearings
Rotor tires
Beater paddles
Floor and apron chain
Spinner discs
Walking beams
Rake wheels

Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

Two-year limited warranty

Pequea's limited warranty covers factory defects for two years, on parts and approved dealer labor.

Warranty terms

General factory defects: 2 years, parts and approved dealer labor only. Rental-use products are prorated.

Pequea says all warranty claims must be submitted through an authorized Pequea dealer.

Eligible Turbo Tedder gearbox assemblies carry a 6 year warranty, and eligible finger drives a limited lifetime warranty, for the original purchaser. The warranty document excludes the HT26X, HT46X, HT66X, HT4102, HT6102, HT6202 and HT8101 from the extended gearbox warranty, so check your model.

Read the full terms in Pequea's Limited Warranty document before you buy.

Made in New Holland, Pennsylvania

Pequea builds its ag equipment at its plant in New Holland, PA.

Where Pequea builds

Pequea says its ag products are proudly made in New Holland, PA, by quality engineers and craftsmen.

The company says it focuses on a few small product segments so it can build customer feedback into its machines.

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday

Get directions (315) 853-6151

Driving distance

New Hartford 6 mi
Utica 9 mi
Rome 14 mi
Oneida 17 mi
Hamilton 20 mi
Herkimer 26 mi
Cazenovia 31 mi
Norwich 42 mi
Cooperstown 47 mi
Syracuse 49 mi
Oneonta 60 mi
Cortland 61 mi

Before you visit

Can I see Pequea implements in person?

Call (315) 853-6151 before you drive over and ask which Pequea implements we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.