(315) 853-6151
Ground Shark brush cutter on a compact track loader clearing brush at the edge of a field

Paladin Attachments Dealer for Skid Steers and Tractors in Central New York

Paladin Attachments makes power rakes, brush cutters, grapples, forks, buckets and snow tools for skid steers and compact tractors, sold under brands such as Bradco, FFC and Harley. Clinton Tractor in Clinton, NY is a Paladin Attachments dealer.

Call (315) 853-6151 Compare models

Power rakes, tillers and land preparation

Harley power rakes, FFC tillers and the AutoRake prepare seedbeds, level ground and clear rocks. Harley says it has nearly 50 years of operator feedback behind its landscaping and seedbed equipment.

Brush cutters, mulchers and stump grinders

Ground Shark rotary brush cutters in four duty levels, plus a Bradco disk mulcher and stump grinder for skid steers.

Grapples, forks and bale handling

Brush and scrap grapples, pallet forks and bale handlers for skid steers, compact tractors and loaders.

Buckets and site tools

Skid steer buckets, a 4-in-1 bucket and Bradco site tools: post driver, tree spade and trencher.

Snow removal

FFC pushes, blades, buckets and a V-blade plow, plus the IceShark snow blower, for skid steers and loaders.

About Paladin Attachments

Paladin Attachments says it is the world's largest independent maker of coupler systems and heavy-duty attachment tools, with 11 brands. The products on this page come from Bradco, FFC, Harley and JRB, including the Ground Shark brush cutters and the IceShark snow blower.

Bradco says it has been enhancing skid steer loaders and compact utility tractors since 1964. FFC builds attachments for agriculture, snow removal, landscaping and road repair, and Harley makes landscaping and seedbed preparation equipment.

Compare Paladin Attachments models

Search all 35 Paladin attachment families by line, name or feature.

Showing all 35 models

Harley MX7 power rake on a skid steer, front view on a lawn

Land preparation

Harley MX Series power rake

Skid steer power rake in four sizes for seedbed prep, finish grading and rock removal.

62-90 inraking width
13-40 gpmflow range
3000 psimax pressure
4sizes, MX5 to MX8
  • Solid tires, no flats on debris-heavy jobsites
  • Bi-directional motor turns the drum either way
  • Hardened teeth shaped for seedbed fracture and moisture retention
  • Box-end plates pull off by pins for windrowing
  • Dual gauge wheels adjust for skim passes or grading
Full specifications
ModelsMX5 / MX6 / MX7 / MX8
Working width (in.)62 / 72 / 85 / 90
Overall width (in.)71.7 / 81.7 / 93.6 / 100.7
Overall height (in.)32.9 / 33.2 / 37.3
Overall length (in.)60.8 / 67.8
Weight, manual angle (lbs)900 / 954 / 1000 / 1120
Weight, hydraulic angle (lbs)937 / 993 / 1037 / 1150
Hydraulic flow (gpm)13 - 20 / 13 - 25 / 15 - 25 / 17 - 40
Max pressure (psi)3000
Max articulation20 Degrees
Rake tooth tip diameter (in.)9

Source: Paladin Harley Power Rake MX Series page.

Harley PTO-driven power box rake mounted behind a tractor on bare soil

Land preparation

Harley PTO power box rake (TM Series)

Tractor-mount power box rake for turf farms, sport fields and large site-prep jobs.

48-90 inraking width
15-80 hpPTO range by model
15°hydraulic or manual angle
  • PTO drive for high torque over large areas
  • Manual and hydraulic angle (15°)
  • Grease-able, triple-sealed shielded bearings
  • Dual gauge wheels for skim passes or drainage grades
Full specifications
ModelsTM4 / TM5 / TM6 / TM7 / TM8
Working width (in.)48 / 60 / 72 / 84 / 90
Overall width (in.)57.5 / 69.5 / 82.6 / 94.6 / 100.5
Weight (lbs)525 / 555 / 865 / 1290 / 1345
Horsepower range (hp)15 - 22 / 18 - 32 / 30 - 40 / 42 - 80
Tractor 3-point mount capacityCAT I / CAT I-II
ASAE minimum lift requirement (lbs)504 / 903 / 1510

Source: Paladin Harley Tractor Mount (PTO-driven) Power Box Rake page.

Harley D4 Power Box Rake on grass, front three-quarter view

Land preparation

Harley D4 power box rake

Compact tool carrier power box rake with manual or hydraulic angle.

48 inraking width
8 to 15gpm required
3000 psimax pressure
365 lbsmanual-angle weight
  • Dual gauge wheels for skim passes and cutting grades
  • Removable, reversible end plates for windrowing
  • Hardened tooth design for seedbed fracture and moisture retention
  • Adjustable polyurethane barrier above the roller
Full specifications
Style(s)Manual & Hydraulic
Working width (in.)48
Overall width (in.)55.4
Overall height (in.)20.8
Overall length (in.)49.1
Weight, manual angle (lbs)365
Weight, hydraulic angle (lbs)380
Hydraulic flow (gpm)8 to 15
Max pressure (psi)3000

Source: Paladin Harley D4 Power Box Rake page.

Direct-drive power rake with gauge wheels mounted on a skid steer, on grass

Land preparation

Harley direct-drive power rake

Direct-drive rake for soil prep, leveling, debris removal and dethatching, in 72 and 90 inch widths.

72 / 90 inraking width
12 to 40gpm required
3500 psimax pressure
  • Direct drive motor eliminates chains and sprockets
  • Heavy-duty frame and carbide teeth
  • 8.6 in. bi-directional drum works soil forward and backward
  • Wheel arms pivot and store vertically
Full specifications
Working width (in.)72 / 90
Overall width (in.)83.3 / 101.4
Overall height (in.)38
Overall length (in.)72.7
Swing angle (degrees)28.5
Weight, manual angle (lbs)1040 / 1120
Weight, hydraulic angle (lbs)1045 / 1125
Hydraulic flow (gpm)12 to 40
Max pressure (psi)3500

Source: Paladin Harley Power Rake - Direct Drive page.

FFC AutoRake mounted on a skid steer, front view with perforated hopper shroud

Land preparation

FFC AutoRake

Picks up rocks and debris and levels soil for seeding and sodding.

62 / 72 inworking width
3/4-6 inrock size picked up
10 - 25gpm range
  • Picks up rocks from 0.75 in. to 6 in.
  • Three-point mounting available
  • Breaks up clods and levels soils
  • Raise loader arms and open the shroud hydraulically to dump
Full specifications
ModelsLAF6864 / LAF6874
Working width (in.)62 / 72
Hopper capacity (yd2, as printed)0.48 / 0.56
Weight (lbs)1,390 / 1,485
Hydraulic flow (gpm)10 - 25
Pressure range (psi)1,000 - 3,500
Lift capacity (lbs)< 9,000
Operating weight (lbs)< 11,000

Source: Paladin AutoRake page.

FFC tiller working a strip of soil on a compact track loader

Land preparation

FFC tillers

Skid steer tillers that break up sod and compacted soil and mix in compost.

38-78 inworking widths
6 intine depth
2styles: fixed and adjustable offset
  • Bi-directional shaft undercuts and top cuts both ways
  • Works next to walls, fences and obstacles
  • Hardened, replaceable tines
  • Fixed offset with dual direct drive, or adjustable offset with chain drive
Full specifications
Working width (in.)Fixed offset: 38 / 52 / 68. Adjustable offset: 52 / 66 / 78
Weight (lbs)Fixed offset: 435 / 600 / 695. Adjustable offset: 750 / 1000 / 1300
Number of tinesFixed offset: 20 / 28 / 36. Adjustable offset: 24 / 32 / 40
Hydraulic flow (gpm)Fixed offset: 6 – 12 / 15 – 40. Adjustable offset (motor kits D, E, H): 14–17 / 18–28 / 29–44 max
Pressure range (psi), fixed offset1500 – 3000 / 2000 – 3500 / 2300 – 3500

Source: Paladin Tillers page.

Bradco Root Rake with tines and top clamp on a skid steer in a meadow

Land preparation

Bradco Root Rake

Grapple-style rake that collects rocks and brush and lets soil sift through.

72.5-84 inrake width
51 ingrapple opening
10.14 intine spacing
  • Leave the dirt behind and pay less at the landfill
  • Replaceable pin-on H&L style teeth
  • Pilot operated check for positive lock clamping
  • Rake heel keeps it upright in storage and scarifies soil
Full specifications
Working width (in.)72.5 / 78.5 / 84
Grapple opening (in.)51
Overall height (in.)38.76
Overall width (in.)70
Weight (lbs)1110 / 1130 / 1225
Tine spacing (in.)10.14

Source: Paladin Root Rake page.

Ground Shark Extreme Duty brush cutter on a Cat compact track loader clearing trees

Brush cutting

Ground Shark Extreme Duty (XD) brush cutter

High-flow cutter for hardwoods up to 10 in. on wooded acreage, right-of-ways and pipeline.

72 / 78 incutting width
10 incutting capacity
30 - 45gpm flow
  • Patented retractable forward shield
  • Four 3/4 in. reversible AR400 blades
  • Bolt-on carbide stump grinding teeth
  • Radial piston direct drive motor
  • Quick, safe cutter-head shut-down valving
Full specifications
Cutting width (in.)72 / 78
Cutting capacity (in.)10
Minimum cutting height (in.)3.25* (angled front allows cut to ground level)
Minimum stump grinding height (in.)0.38
Deck thickness (in.)0.25
Recommended flow (gpm)30 - 45
Required lift capacity (lbs)2400 / 2700
Weight (lbs)2008 / 2267

Source: Paladin Brush Cutter - Extreme Duty (XD) page.

Ground Shark Heavy Duty brush cutter, three-quarter view from above

Brush cutting

Ground Shark Heavy Duty (HD) brush cutter

Clears medium to heavy brush and hardwoods up to 7 in. with a retractable forward shield.

66 / 72 incutting width
7 incutting capacity
20 - 34gpm flow
  • Patented retractable forward shield
  • Bi-directional blades use both edges without rotating
  • Direct drive motor
  • Optional MulchPower gauge
  • Bolt-on carbide stump grinding teeth
Full specifications
Cutting width (in.)66 / 72
Cutting capacity (in.)7
Minimum cutting height (in.)2.5* (angled front allows cut to ground level)
Minimum stump grinding height (in.)0.75 / 0.5
Deck thickness (in.)0.25
Recommended flow (gpm)20 - 34
Required lift capacity (lbs)2200
Overall width (in.)71.13 / 77.13

Source: Paladin Brush Cutter - Heavy-Duty (HD) page.

Ground Shark High Performance brush cutter, top three-quarter view

Brush cutting

Ground Shark High Performance (HP) brush cutter

Optimized for horizontal cutting of grass, brush and hardwoods up to 10 in.

72 / 84 incutting width
10 incutting capacity
30 - 45gpm flow
  • Radial piston direct drive motor
  • Tri-lobe blade carrier for fast start-up and recovery
  • Standard MulchPower gauge
  • Three 5/8 in. AR400 blades
  • Retractable forward shield
Full specifications
Cutting width (in.)72 / 84
Cutting capacity (in.)10
Minimum cutting height (in.)2.5* (angled front allows cut to ground level)
Deck thickness (in.)0.25 / 0.31
Recommended flow (gpm)30 - 45
Required lift capacity (lbs)2600 / 3000
Weight (lbs)1895 / 2178

Source: Paladin Brush Cutter - High Performance (HP) page.

Ground Shark Standard Duty brush cutter on a John Deere skid steer in woods

Brush cutting

Ground Shark Standard Duty (SD) brush cutter

General-purpose cutter for routine land maintenance, light to medium brush up to 4 in.

60 / 72 / 78 incutting width
4 incutting capacity
15 - 40gpm by model
  • Low-profile deck slips under fences
  • Three bi-directional forged blades
  • Dual pressure reliefs protect the drive
  • Optional dual wheel kits prevent scalping
Full specifications
Cutting width (in.)60 / 72 / 78
Cutting capacity (in.)4
Minimum cutting height (in.)2
Deck thickness (in.)0.25
Recommended flow (gpm)15 - 25 / 26 - 32 / 33 - 40
Required lift capacity (lbs)1200 / 1400 / 1500 / 1600
Weight (lbs)1120 / 1280 / 1320 / 1360 / 1365 / 1405

Source: Paladin Brush Cutter - Standard Duty (SD) page.

Bradco FD60 disk mulcher on a Cat compact track loader in a dry field

Brush cutting

Bradco FD60 disk mulcher

High-flow forestry disk mulcher for skid steers that fells trees, mulches and grinds stumps.

14 infells trees up to
30 - 45gpm flow
2217 lbsweight
  • Designed to reduce jamming
  • MulchPower gauge shows stored disk energy
  • Bearing housing never needs greasing
  • Debris shovel keeps teeth out of the dirt
  • Interchangeable QUADCO teeth
Full specifications
Max tree diameter (in.)14
Recommended flow (gpm)30 - 45
Minimum operating pressure (psi)3300
Overall height (in.)39.42
Overall width (in.)75.74
Overall length (in.)75.51
Weight (lbs)2217

Source: Paladin Disk Mulcher - FD60 page.

Bradco SG26 stump grinder wheel on a skid steer grinding a stump

Brush cutting

Bradco stump grinder (SG26 and SG30)

Skid steer stump grinder in standard-flow and high-flow versions.

10 / 12 inbelow ground
60 inswing arc
28cutting teeth
  • Tooth pattern cuts side to side and vertically
  • Heavy-duty gearbox drives
  • Grouser pad stabilization prevents plunge stalls
  • Dial-adjust swing speed
  • Multi-function control from inside the loader
Full specifications
ModelsSG26 standard flow / SG30 high flow
Below ground depth (in.)10 / 12
Swing arc (in.)60
Number of cutting teeth28
Wheel diameter (in.)26 / 30
Recommended flow (gpm)14 - 28 / 29 - 44
Weight (lbs)720 / 795

Source: Paladin Stump Grinder page.

FFC utility brush grapple on a compact track loader, on a lawn

Grapples, forks and bales

FFC utility brush grapple

Open-floor brush grapple with independent arms for scrap, brush and land clearing.

60-84 instandard-duty widths
72-84 inheavy-duty widths
9-16tines
  • Hardened pins and cushioned cylinders
  • Pilot-operated check valve lets each arm move independently
  • Replaceable hardened steel bushings
  • Cylinder and hose guard included
Full specifications
Overall width (in.)Standard duty: 60 / 66 / 72 / 84. Heavy duty: 72 / 78 / 84
Weight (lbs)Standard duty: 668 / 696 / 724 / 817. Heavy duty: 995 / 1010 / 1070
Overall height, grapple open (in.)Standard duty: 33. Heavy duty: 40
Overall height, grapple closed (in.)29
Number of tinesStandard duty: 9 / 10 / 11 / 13. Heavy duty: 14 / 16

Source: Paladin Utility Brush Grapple page.

FFC construction brush grapple on a John Deere compact track loader

Grapples, forks and bales

FFC construction scrap and brush grapples

Heavy-duty grapples for large skid steers and ag loaders: solid-floor scrap and open-tine brush.

60-90 inbrush grapple widths
61-89 inin overall width, scrap grapples
20,000 lbsmax carrier weight, HD brush
  • Patented grapple pins and cushioned cylinders
  • Hardened pins, cushioned cylinder kit and hose guard
  • Solid floor scrap grapples and open-tine brush grapples
  • Hose kit must be ordered with a new grapple
Full specifications
Overall width (in.)Brush SD: 60 / 66 / 72 / 84. Brush HD: 72 / 78 / 84. Scrap SD: 61 / 67 / 73. Scrap HD: 77 / 83 / 89
Weight (lbs)Brush SD: 668 / 696 / 724 / 817. Brush HD: 995 / 1010 / 1070. Scrap SD: 738 / 788 / 835. Scrap HD: 1081 / 1133 / 1180
Overall height, grapple open (in.)Brush SD: 33. Brush HD: 40. Scrap SD: 34. Scrap HD: 40
Maximum weight of prime mover (lbs)20,000
Maximum lift capacity of prime mover (lbs)10,000
Maximum hydraulic pressure output (psi)3,000

Source: Paladin Construction Scrap and Brush Grapples page.

JRB grapple bucket with two tined grapple arms, side view

Grapples, forks and bales

JRB grapple bucket

Loader bucket with two independent grapple arms, in full-side, half-side or cutaway designs.

3side designs
2independent grapple arms
  • Dual hydraulic cylinders clamp uneven loads
  • Optional screening for maximum material retention
  • Drilled for OEM standard bolt-on cutting edges
  • Pin-on or quick-coupler compatible
  • Needs third-function loader hydraulics

Source: Paladin Grapple Bucket page.

Bradco pallet forks on a Bobcat skid steer, on a lawn

Grapples, forks and bales

Bradco Signature Series pallet forks

Light, strong fork frame with an open guard for visibility and a D ring for lifting.

45 / 60 inframe widths
4,000-6,000 lbsfork capacities
42 / 48 intine lengths
  • Brick guard protects loads
  • Patented D ring for load securing
  • Angled side corners and step for easy cab access
  • Optional bolt-on step
Full specifications
Overall width (in.)45.88 / 60.75
Overall width with step (in.)55.5 / 65.75
Overall height (in.)39.38 / 38.75
ITA Category II fork mounting (in.)16
Adjustable tine spacing minimum (in.)8 / 9
Adjustable tine spacing maximum (in.)44 / 60

Source: Paladin Bradco Pallet Forks page.

Bradco compact tractor pallet fork frame with two forks, rendered view

Grapples, forks and bales

Bradco compact tractor pallet forks

Class II fork frame with positioning lock pin for compact tractor loaders.

45 inframe width
2,300 lbsat 24 in. load center
265 lbsweight
  • Class II fork carriages
  • 36, 42 and 48 in. tines available
  • Open guard for visibility
  • Optional auger mount, bale spear and 2 in. receiver hitch
Full specifications
Models108308 / 108309
Overall width (in.)45.2
Adjustable spacing, max. (in.)42.5
Weight (lbs)265

Source: Paladin Compact Tractor Pallet Forks page.

FFC bale spear on a Cat skid steer lifting a round bale

Grapples, forks and bales

FFC bale spear

Round and square bale spear for compact tractors up to 50 hp.

2,000-4,000 lbsbale capacity at 24 in.
1-3spears
45.3 inframe width
  • Single, dual or triple spear
  • Excellent visibility through the frame
  • Large, heavy-duty frame
  • Also available CE certified
Full specifications
Models17200 Single / 17212 Dual / 11910 Single / 11920 Dual / 17213 Triple / 10712
Overall width (in.)45.3
Overall depth (in.)50.5
Bale capacity at 24 in. (lbs)2,000 / 3,000 / 4,000
Weight (lbs)145 / 155 / 195 / 235 / 230 / 150

Source: Paladin Bale Spear page.

Bradco bale grab frame with hooked tines, rendered view

Grapples, forks and bales

Bradco bale grab

Picks up and moves large square bales on one auxiliary hydraulic circuit.

34 ft square bales
42 ft square bales
  • Hooks of high-strength T-1 abrasion-resistant steel
  • Single auxiliary hydraulic circuit
  • Replaceable hooks and tines
  • Forged straight spear tines

Source: Paladin Bale Grab page.

FFC Bale Hugger clamping a wrapped round bale on a skid steer

Grapples, forks and bales

FFC Bale Hugger / Bale Squeeze

Hydraulic clamp that holds round or rectangular bales and silage bags with constant pressure.

28-80 inclamp width
2,400 lbsmax load
500 lbsweight
  • Constant pressure to avoid dropped bales
  • Hydraulically driven pressure arms
  • Lifts, moves and stacks round or rectangular bales
Full specifications
Order codeLAF1960
Weight (lbs)500
Height (in.)47.25
Width (in.)37.25
Width open (in.)89
Depth (in.)54
Lift capacity (lbs)< 10,000
Operating weight (lbs)< 32,000

Source: Paladin Bale Hugger / Bale Squeeze page.

Paladin manure push scraper with a rubber cutting edge, rendered view

Grapples, forks and bales

Paladin manure push

Scraper blade for livestock areas, feed lots and flood clean-up.

60-96 inwidths
320-430 lbsweight
28 inheight
  • Thick rubber edge protects concrete
  • Optional pull-back kit
  • Rubber edge 1 ft x 6 in. on scraper and pull-back
Full specifications
Models10711-60 / 10711-72 / 10711-84 / 10711-96
Overall width (in.)60 / 72 / 84 / 96
Overall height (in.)28
Overall depth (in.)29
Weight (lbs)320 / 355 / 395 / 430

Source: Paladin Manure Push page.

Heavy-duty utility bucket for skid steers, rendered view

Buckets and site tools

Heavy-duty utility bucket

Skid steer utility bucket in four widths with a 10-gauge reinforced wrapper.

62-98 inwidths
1.21 yd3max heaped capacity
11,000 lblargest loader class
  • Four sizes fit a wide range of loaders
  • 10-gauge reinforced wrapper
  • Bolt-on reversible cutting edges and tooth bars available
  • 8 in. bolt-on spill guard available
Full specifications
Width (in.)62 / 74 / 86 / 98
Height (in.)24
Depth (in.)33
Leading edge (in.)20.75
Weight (lbs)502 / 569 / 661 / 744
Capacity struck (yd3)0.61 / 0.73 / 0.85 / 0.97
Capacity heaped (yd3)0.74 / 0.9 / 1.06 / 1.21

Source: Paladin Heavy-Duty Utility Buckets page.

FFC large frame skid steer bucket, rendered view

Buckets and site tools

FFC large frame skid steer bucket

Higher-capacity utility and dirt buckets for larger skid steers.

82.5 / 94.2 inwidths
1.50 / 1.73 yd3heaped capacity
  • Models for utility and dirt applications
  • Pacal steel tapered cutting edge
  • Bolt-on reversible cutting edges and tooth bars available
  • Specify skid steer make and model when ordering
Full specifications
Width (in.)82.5 / 94.2
Capacity heaped (yd3)1.50 / 1.73

Source: Paladin Large Frame Skid-Steer Buckets page.

Bradco low-profile dirt bucket on a Kubota compact track loader digging a trench

Buckets and site tools

Bradco low-profile dirt bucket

Dirt bucket with a long floor for visibility, productivity and cutting grade.

30 instandard floor
36 inlong floor
  • 36 in. long floor for better visibility and cutting grade
  • Side cutters tie into the front edge
  • Bolt-on wear edge, tooth bars and corner guards available

Source: Paladin Low-Profile Dirt Bucket page.

Bradco 4-in-1 bucket on a Kubota compact track loader

Buckets and site tools

Bradco 4-in-1 multi-purpose bucket

Loader bucket, clam, dozer, scraper and bottom dump in one bucket.

60-84 inwidths
6400 lbsclamping force, HD
23.4 cu ftmax heaped capacity
  • Strong hinges and pins distribute load
  • Bottom dump into high-side board trucks
  • Bolt-on wear edge and tooth bars available
  • Options: bolt-on side cutters, spill guards
Full specifications
Width (in.)Heavy duty: 72 / 78 / 84. Standard duty: 60 / 66 / 72
Heaped capacity (cu ft)Heavy duty: 19.99 / 21.69 / 23.4. Standard duty: 12.23 / 15.76 / 17.23
Clamping force (lbs)Heavy duty: 6400. Standard duty: 2354
Operating pressure (psi)Heavy duty: 3000. Standard duty: 2250
Weight (lbs)Heavy duty: 900 / 935 / 975. Standard duty: 585 / 620 / 655

Source: Paladin Multi-Purpose 4-in-1 Bucket page.

Bradco PD4800 post driver on a Bobcat skid steer in front of a barn

Buckets and site tools

Bradco PD4800 post driver

Skid steer post driver for fence posts and guard rail, up to 10 ft long and 8 in. across.

48 inmaximum stroke
1,360 lbsweight
24 gpmmaximum flow
  • Works with round, square and rectangular posts
  • Quick-change collars switch post sizes in minutes
  • Does not mushroom posts
  • Manual side shift
  • Optional striker plates
Full specifications
Maximum stroke (in.)48
Weight (lbs)1,360
Hammer weight, standard (lbs)289
Minimum hydraulic pressure (psi)2000
Maximum flow (gpm)24
Length (in.)38.69
Width (in.)54.25
Height (in.)91.48

Source: Paladin Post Driver page.

Bradco tree spade on a yellow skid steer digging around a young pine tree

Buckets and site tools

Bradco 4425 tree spade

Skid steer tree spade that digs and balls trees for replanting or baskets.

32 - 44 inball diameters
3 - 4.5 intrunk caliper
1875 lbsweight with blades
  • Overlapping blades cut roots cleanly
  • Adjustable legs set ball depth
  • Wide gate opening
  • Standard electric joystick control
Full specifications
Ball diameters available (in.)32 - 44
Tree diameter, trunk caliper (in.)3 - 4.5
Ball weight (lbs)1200 - 1500
Digging depth (in.)31
Cutting angle (degrees)25
Number of blades4
Flow requirements (gpm)10
Minimum operating pressure (psi)2250
Weight with blades (lbs)1875

Source: Paladin Tree Spade page.

Bradco 615 trencher on a yellow mini skid steer cutting a trench through grass

Buckets and site tools

Bradco 615 trencher

Skid steer trencher with 24, 30 and 36 in. digging depths; the 615F offsets to dig outside the tread.

24 / 30 / 36 indigging depths
72 incut outside skid steer tread, 615F
  • Two motor options match many skid steer flows
  • Spring-loaded, self-adjusting idler with full rock guards
  • Anti-back flex chain for many soil types
  • Single-side spoil augering

Source: Paladin Trencher - Model 615 page.

FFC snow push on a skid steer moving snow on a lot

Snow removal

FFC snow pushes

Box-style snow pushers in three series, for large piles, lots and feed lots.

71.5-238.5 inpath widths
3series: 228, 232, 233
525-3185 lbsapprox. weights
  • Moves large volumes of snow
  • Optional pull-back kit draws snow from buildings and fences
  • Optional bucket lip mount on 10, 12 and 14 ft models
  • Also moves wastewater, manure and flow clean-up
Full specifications
Width (in.)Path width, 228 Series: 142.5 / 166.5 / 190.5 / 238.5. 232 Series: 71.5 / 83.5 / 95.5 / 119.5. 233 Series: 95.5 / 119.5 / 143.5 / 167.5
Height (in.)Working height, 228 Series: 48.8. 232 Series: 23.7. 233 Series: 41.3
Weight, approx. (lbs)228 Series: 2485 / 2660 / 2835 / 3185. 232 Series: 525 / 570 / 610 / 705. 233 Series: 1100 / 1230 / 1375 / 1505

Source: Paladin Snow Pushes page.

FFC snow bucket on a Cat compact track loader in snow

Snow removal

FFC snow buckets

Large-volume skid steer buckets for snow and loose material, medium and heavy duty.

84-108 inwidths
2.67 yd3max heaped capacity
6models
  • Cut-out back plate for visibility
  • Universal hitch fits skid steers
  • Optional bolt-on edge
Full specifications
Width (in.)84 / 96 / 101.5 / 108
Height (in.)29.9 / 37.6
Depth (in.)42 / 46.2
Weight, approx. (lbs)733 / 795 / 999 / 820 / 1020 / 1078
Capacity struck (yd3)1.14 / 1.31 / 1.83 / 1.4 / 1.95 / 2.07
Capacity heaped (yd3)1.47 / 1.7 / 2.36 / 1.82 / 2.52 / 2.67

Source: Paladin Snow Buckets page.

FFC 115 Series snow blade on a Cat compact track loader

Snow removal

FFC 115 Series snow blade

Large mold board snow blade for the biggest skid steers and tractor backhoe loaders.

84-144 inwidths
35°hydraulic angle each way
1125-1435 lbsweight
  • Replaceable bolt-on wear edge, optional rubber edge
  • Adjustable-height skid shoes
  • Reinforced seven-gauge steel blade
  • Spring-loaded trip mechanism
Full specifications
Width (in.)84 / 96 / 108 / 120 / 132 / 144
Height (in.)32
Weight, approx. (lbs)1125 / 1180 / 1235 / 1315 / 1375 / 1435
Cutting width at 35° angle (in.)69 / 79 / 88 / 98 / 108 / 118

Source: Paladin Snow Blades - 115 Series page.

FFC 5700 Series snow blade, angled front view, rendered

Snow removal

FFC 5700 Series snow blade

Hydraulic-angle snow blade with replaceable wear edge, 84 to 144 in. wide.

84-144 inwidths
30°hydraulic angle each way
875-1185 lbsweight
  • Replaceable bolt-on wear edge, optional rubber edge
  • Adjustable-height skid shoes
  • Reinforced seven-gauge steel blade
  • Spring-loaded trip mechanism
Full specifications
Width (in.)84 / 96 / 108 / 120 / 132 / 144
Height (in.)32
Weight, approx. (lbs)875 / 930 / 890 / 1065 / 1125 / 1185
Cutting width at 30° angle (in.)73 / 83 / 93 / 104 / 114 / 125

Source: Paladin Snow Blades - 5700 Series page.

IceShark snow blower on a skid steer throwing snow

Snow removal

IceShark 250 Series snow blower

Skid steer snow blower with a floating hitch, articulating chute and optional backdrag.

48-84 inwidths
8-45 gpmflow by series
3-45 ftchute throw
  • Optional backdrag clears snow within 6 in. of walls
  • 3D floating hitch follows uneven ground
  • Dual articulating chute with 270 degrees of motion
  • Toolless adjustable steel skid skis
Full specifications
Width (in.)48 / 60 / 72 / 84
Height (in.)27.5 / 27 / 34
Hydraulic flow (gpm)B: 8 - 15. D: 15 - 27. F: 27 - 35. H: 35 - 45
Auger diameter (in.)15 / 19
Weight, approx. (lbs)B: 820. D: 860 to 1120. F: 1030 to 1260. H: 1045 to 1280
BackdragYes / No (by model)

Source: Paladin Snow Blower - 250 Series page.

FFC V-blade snow plow on a Cat compact track loader in snow

Snow removal

FFC V-blade snow plow

Angles straight, left, right, scoop or V to clear walks, driveways and lots.

30°angle each way
5°float and 5° tilt
6blade widths
  • Hydraulic sequencing or electro-hydraulic valve for independent blade function
  • Reversible cutting edge
  • Spring-loaded trip mechanism
  • Blade floats and tilts for ground contour

Source: Paladin V-Blade Snow Plow page.

Power rakes, tillers and land preparation at a glance

ModelHarley MX Series power rakeHarley PTO power box rake (TM Series)Harley D4 power box rakeHarley direct-drive power rakeFFC AutoRakeFFC tillersBradco Root Rake
Working width (in.)62 / 72 / 85 / 9048 / 60 / 72 / 84 / 904872 / 9062 / 72Fixed offset: 38 / 52 / 68. Adjustable offset: 52 / 66 / 7872.5 / 78.5 / 84
Weight (lbs)–525 / 555 / 865 / 1290 / 1345––1,390 / 1,485Fixed offset: 435 / 600 / 695. Adjustable offset: 750 / 1000 / 13001110 / 1130 / 1225
Weight, manual angle (lbs)900 / 954 / 1000 / 1120–3651040 / 1120–––
Hydraulic flow (gpm)13 - 20 / 13 - 25 / 15 - 25 / 17 - 40–8 to 1512 to 4010 - 25Fixed offset: 6 – 12 / 15 – 40. Adjustable offset (motor kits D, E, H): 14–17 / 18–28 / 29–44 max–
Max pressure (psi)3000–30003500–––

Brush cutters, mulchers and stump grinders at a glance

ModelGround Shark Extreme Duty (XD) brush cutterGround Shark Heavy Duty (HD) brush cutterGround Shark High Performance (HP) brush cutterGround Shark Standard Duty (SD) brush cutterBradco FD60 disk mulcherBradco stump grinder (SG26 and SG30)
Cutting width (in.)72 / 7866 / 7272 / 8460 / 72 / 78––
Cutting capacity (in.)107104––
Recommended flow (gpm)30 - 4520 - 3430 - 4515 - 25 / 26 - 32 / 33 - 4030 - 4514 - 28 / 29 - 44
Weight (lbs)2008 / 2267–1895 / 21781120 / 1280 / 1320 / 1360 / 1365 / 14052217720 / 795

Grapples, forks and bale handling at a glance

ModelFFC utility brush grappleFFC construction scrap and brush grapplesBradco Signature Series pallet forksBradco compact tractor pallet forksFFC bale spearFFC Bale Hugger / Bale SqueezePaladin manure push
Overall width (in.)Standard duty: 60 / 66 / 72 / 84. Heavy duty: 72 / 78 / 84Brush SD: 60 / 66 / 72 / 84. Brush HD: 72 / 78 / 84. Scrap SD: 61 / 67 / 73. Scrap HD: 77 / 83 / 8945.88 / 60.7545.245.3–60 / 72 / 84 / 96
Weight (lbs)Standard duty: 668 / 696 / 724 / 817. Heavy duty: 995 / 1010 / 1070Brush SD: 668 / 696 / 724 / 817. Brush HD: 995 / 1010 / 1070. Scrap SD: 738 / 788 / 835. Scrap HD: 1081 / 1133 / 1180–265145 / 155 / 195 / 235 / 230 / 150500320 / 355 / 395 / 430

Buckets and site tools at a glance

ModelHeavy-duty utility bucketFFC large frame skid steer bucketBradco 4-in-1 multi-purpose bucketBradco PD4800 post driver
Width (in.)62 / 74 / 86 / 9882.5 / 94.2Heavy duty: 72 / 78 / 84. Standard duty: 60 / 66 / 7254.25
Weight (lbs)502 / 569 / 661 / 744–Heavy duty: 900 / 935 / 975. Standard duty: 585 / 620 / 6551,360
Capacity heaped (yd3)0.74 / 0.9 / 1.06 / 1.211.50 / 1.73––

Snow removal at a glance

ModelFFC snow pushesFFC snow bucketsFFC 115 Series snow bladeFFC 5700 Series snow bladeIceShark 250 Series snow blower
Width (in.)Path width, 228 Series: 142.5 / 166.5 / 190.5 / 238.5. 232 Series: 71.5 / 83.5 / 95.5 / 119.5. 233 Series: 95.5 / 119.5 / 143.5 / 167.584 / 96 / 101.5 / 10884 / 96 / 108 / 120 / 132 / 14484 / 96 / 108 / 120 / 132 / 14448 / 60 / 72 / 84
Height (in.)Working height, 228 Series: 48.8. 232 Series: 23.7. 233 Series: 41.329.9 / 37.6323227.5 / 27 / 34
Weight, approx. (lbs)228 Series: 2485 / 2660 / 2835 / 3185. 232 Series: 525 / 570 / 610 / 705. 233 Series: 1100 / 1230 / 1375 / 1505733 / 795 / 999 / 820 / 1020 / 10781125 / 1180 / 1235 / 1315 / 1375 / 1435875 / 930 / 890 / 1065 / 1125 / 1185B: 820. D: 860 to 1120. F: 1030 to 1260. H: 1045 to 1280

Genuine Paladin parts and manuals

Paladin has a Find Parts page with a video on searching for parts and a link to Documoto, and each product page lists operating manuals and spec sheets. Ask the Clinton Tractor parts counter for Paladin parts at (315) 853-6151, and have your model or order code ready.

  • Bolt-on cutting edges
  • Tooth bars
  • Brush cutter blades
  • Skid shoes
  • Tiller tines
  • Rake teeth
  • Grapple pins and bushings
  • Snow blade wear edges
  • Hydraulic hoses and hose kits
Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

Epiroc warranty policy

Paladin points owners to the Epiroc 2026 Warranty Policy, which lists one year for Bradco, FFC and Harley products.

Warranty terms

The Epiroc Industrial Tools and Attachments 2026 Warranty Policy says all its products are warranted to be free of defects in material and/or workmanship.

Its addendum lists a one-year warranty period for Bradco, FFC and Harley, and 90 days for new Paladin replacement parts. Some products have other periods.

The dealer must submit a warranty claim within 30 days from date of repair. Read the full policy on the Paladin site before you buy.

Paladin technical service

Paladin lists a technical service line and email for its brands.

Contact details

Paladin, 2800 Zeeb Road, Dexter, MI 48130. Technical Service: +1 (833) 723-1843 or technicalservice@epiroc.com.

Paladin sends Paladin Compact and Paladin Heavy warranty claims straight to its Technical Service inbox.

Options

Paladin lists these options on its product pages. Ask us which ones fit the model you want.

Also available

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday
Get directions(315) 853-6151

Driving distance

  • New Hartford 6 mi
  • Utica 9 mi
  • Rome 14 mi
  • Oneida 17 mi
  • Hamilton 20 mi
  • Herkimer 26 mi
  • Cazenovia 31 mi
  • Norwich 42 mi
  • Cooperstown 47 mi
  • Syracuse 49 mi
  • Oneonta 60 mi
  • Cortland 61 mi

Before you visit

Can I see Paladin Attachments models in person?

Call (315) 853-6151 before you drive over and ask which Paladin Attachments models we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.