Meyer Snow Plow and Salt Spreader Dealer in Central New York

Showing all 24 models

Meyer truck plow

Meyer Lot Pro

Full-trip straight blade for 3/4-ton trucks and larger, in steel or roto-molded poly.

32"moldboard height

75°attack angle

7' 6" to 9'lengths

• 75-degree attack angle for snow clearing and back-dragging
• Tallest moldboard in its class, the maker says
• Steel or roto-molded poly moldboard
• Pro Mount hydraulic switch attachment, with no lifting chains

Full specifications

Fits	3/4-ton trucks and larger
Blade type	Full-Trip
Moldboard length	7' 6" / 8' 6" / 8' / 9'
Moldboard height	32"
Moldboard gauge	12 ga / 3/8" Poly
Vertical ribs	6
Plow trip springs	4
Cutting edge	1/2" x 6"
Avg width at full angle	81" / 86" / 92" / 97"
Angling rams	1-1/2" x 10"
Weight complete	731 lbs to 978 lbs

Source: Meyer Lot Pro page.

Meyer truck plow

Meyer Lot Pro LD

Commercial-grade straight blade built for 1/2-ton and light-duty pickups.

28"moldboard height

7' 6"length

610 lbscomplete

• Nite Saber LED lights on every Lot Pro LD
• Tubular steel A-frame and pivot bar behind the moldboard
• Field adjustable trip springs
• Moldboard and controller interchange with the Super-V3 LD

Full specifications

Fits	1/2-ton pickups with snow plow prep packages
Blade type	Full-Trip
Moldboard length	7' 6"
Moldboard height	28"
Moldboard gauge	14 ga
Vertical ribs	6
Plow trip springs	2
Cutting edge	3/8" x 6"
Avg width at full angle	81"
Angling rams	1-1/2" x 10"
Weight complete	610 lbs
Construction	Steel

Source: Meyer Lot Pro LD page.

Meyer truck plow

Meyer Super-V3

Commercial V-plow with independently controlled wings and trip-edge moldboards, for 3/4-ton trucks and larger.

8' 6" to 10' 6"lengths

12 gamoldboard

954-1164 lbscomplete

• V, scoop or straight blade from one button controller
• Locking double-acting cylinders for back-dragging
• Trip-edge moldboard: only the lower part gives way on impact
• LED lights and center steel cutting edge

Full specifications

Fits	3/4-ton trucks and larger
Blade type	Bottom-Trip
Moldboard length	8' 6" / 9' 6" / 10' 6"
Moldboard height	29-1/2" to 38-1/4" / 38-1/4" / 29-1/2" to 40-1/2" / 29-1/2" to 39-1/4"
Moldboard gauge	12 ga
Vertical ribs	4 per wing / 5 per wing
Plow trip springs	2 per wing
Cutting edge	1/2" x 6"
Avg width at full angle	88" / 99" / 109"
Angling rams	1-1/2" x 12"
Weight complete	954 lbs / 994 lbs / 1034 lbs / 1084 lbs / 1124 lbs / 1164 lbs
Construction	Steel

Source: Meyer Super-V3 page.

Meyer truck plow

Meyer Super-V3 LD

The V-plow for 1/2-ton and light-duty pickups, with a bottom-trip moldboard.

7' 6"length

12 gamoldboard

582 lbscomplete

• Bottom-trip design protects the plow and the operator
• Standard locking double-acting cylinders for back-dragging
• One-button controller sets V, scoop or straight blade
• Nite Saber LED lights

Full specifications

Fits	1/2-ton trucks
Blade type	Bottom-Trip
Moldboard length	7' 6"
Moldboard height	29-1/2" to 37-13/32"
Moldboard gauge	12 ga
Vertical ribs	4 per wing
Plow trip springs	2 per wing
Cutting edge	1/2" x 6"
Avg width at full angle	81"
Angling rams	1-1/4" x 12"
Weight complete	582 lbs
Construction	Steel

Source: Meyer Super-V3 LD page.

Meyer truck plow

Meyer Drive Pro

Compact plow for clearing narrow driveways, alleys and tight spaces from a 1/2-ton pickup or SUV.

5' to 7' 6"lengths

325-620 lbscomplete

2operating systems

• Attaches or detaches in well under a minute with one handle
• Choice of Standard Operating System or EZ-Mount Plus
• Pistol grip controller with Hands-Free Plowing
• Sold in 5 to 7 ft 6 in sizes, including Jeep, Ram and Euro versions

Full specifications

Fits	Full-size SUVs, light-duty pickups, half-ton pickups
Blade type	Steel Full Trip
Moldboard length	5' / 6' / 6' 8" / 7' 6"
Moldboard height	22-1/2" / 22" / 26"
Moldboard gauge	14 ga
Vertical ribs	8 / 6
Plow trip springs	2
Cutting edge	1/4" x 6" / 3/8" x 6"
Avg width at full angle	54-1/2" / 65" / 72" / 81"
Angling rams	1-1/2" x 10"
Weight complete	325 lbs to 620 lbs
Construction	Steel

Source: Meyer Drive Pro page.

Meyer truck plow

Meyer Super Blade

Adjustable commercial-grade straight plow that widens from 8 to 10 feet for 3/4-ton trucks and larger.

8' to 10'adjustable

36"outer wings

1175 lbscomplete

• Moldboard widens at the touch of a button
• 32-inch moldboard with 36-inch flared outer wings
• Heavy-duty 2-inch by 10-inch angling rams
• Tubular pivot bar with heavy-duty center support

Full specifications

Fits	3/4-ton pickups and larger
Blade type	Full-Trip
Moldboard length	8' to 10'
Moldboard height	32" to 36"
Moldboard gauge	12 ga
Vertical ribs	9
Plow trip springs	6
Cutting edge	1/2" x 6"
Avg width at full angle	87" to 111"
Angling rams	2" x 10"
Weight complete	1175 lbs
Construction	Tubular steel A-frame

Source: Meyer Super Blade page.

Meyer truck plow

Meyer Diamond Edge

Bottom-trip contractor plow for 3/4-ton trucks and larger.

7' 6" to 9'lengths

32-1/2"moldboard height

870-940 lbscomplete

• Bottom-trip moldboard keeps the plow upright and plowing
• Reversible cutting edge is standard
• Tubular steel A-frame and pivot bar
• Standard Operating System or EZ-Mount Plus

Full specifications

Fits	3/4-ton trucks and larger
Blade type	Steel Trip Edge / Bottom-Trip
Moldboard length	7' 6" / 8' 6" / 8' / 9'
Moldboard height	32-1/2"
Moldboard gauge	12 ga
Vertical ribs	6
Plow trip springs	4
Cutting edge	1/2" x 6"
Avg width at full angle	82" / 87" / 92" / 98"
Angling rams	1-1/2" x 10"
Weight complete	870 lbs / 890 lbs / 920 lbs / 940 lbs

Source: Meyer Diamond Edge page.

Meyer truck plow

Meyer Road Pro 32-Series

Heavy-duty plow for 9,300 to 26,000 lb GVW trucks, with a 32-inch moldboard.

8' to 10'lengths

32"moldboard height

75°attack angle

• 32-inch-high moldboard with a 75-degree attack angle
• Meyer E-73 hydraulics or the truck central hydraulics
• Heavy-duty 2-inch by 10-inch rams
• Adjustable snow shoes

Full specifications

Fits	9,300 – 26,000 GVW municipal trucks
Blade type	Full-Trip
Moldboard length	8' / 9' / 10'
Moldboard height	32"
Moldboard gauge	10 ga
Vertical ribs	8 / 6
Plow trip springs	6
Cutting edge	1/2" x 6"
Avg width at full angle	86" / 97" / 103"
Angling rams	2" x 10" / 1-1/2" x 10"
Weight complete	932 lbs / 975 lbs / 1040 lbs
Construction	Steel

Source: Meyer Road Pro 32-Series page.

Meyer truck plow

Meyer Road Pro 36-Series

The largest plow in the Meyer line, for 26,000 to 33,000 lb GVW municipal trucks.

9' to 11'lengths

36"moldboard height

65°attack angle

• Full-trip or bottom-trip moldboard
• Pivot lets the blade oscillate five degrees each side
• Trip springs adjust in the field with no special tools
• Works with trucks that have central hydraulics, or without

Full specifications

Fits	26,000 - 33,000 GVW municipal trucks
Blade type	Full-Trip / Bottom-Trip
Moldboard length	9' / 10' / 11'
Moldboard height	36"
Moldboard gauge	7 ga
Vertical ribs	8
Plow trip springs	6 / 8
Cutting edge	1/2" x 6" / 3/4" x 6"
Avg width at full angle	93" / 104" / 114"
Angling rams	2-1/2" x 11-1/2"
Weight complete	1562 lbs / 1610 lbs / 1660 lbs / 1850 lbs
Construction	Steel or Polyethylene

Source: Meyer Road Pro 36-Series page.

Meyer insert spreader

Meyer Crossfire

Polyethylene insert spreader with built-in pre-wet on deluxe models, for 3/4-ton and larger pickups.

1.5-2.0cu yd

30'max spread

5 yrwarranty, registered online

• Deluxe models have an integrated pre-wet system
• Polyethylene hopper and spinner will not rust
• Integrated work light and built-in tarp hooks
• Stores upright in the off-season

Full specifications

Vehicle	3/4-ton pickup trucks
Hopper length	6-feet or 8-feet
Materials	Dry, free-flowing rock salt
Construction	Polyethylene
Capacity (volume)	1.5 cu yd / 2.0 cu yd
Capacity (weight)	4050 lbs / 5400 lbs
Spread width	4' - 30'
Empty weight	420 lbs / 625 lbs / 795 lbs / 974 lbs
Hopper width	70"
Hopper depth	92" / 116" / 115"
Hopper height	37"
Hopper material	Poly
Spinner diameter	13"
Spinner material	Poly
Warranty (spec table)	5 years when registered online

Source: Meyer Crossfire page.

Meyer insert spreader

Meyer Base Line 600 & 800

Economical insert spreaders with a stainless steel hopper and a choice of gas or electric power.

1.5-2.0cu yd

30'spread

5models

• Stainless inverted-V and drag chain conveyor
• Briggs & Stratton or Honda gas, or dual 12-volt electric
• Hopper fits short or long bed pickups
• In-cab controller with electric start

Full specifications

Vehicle	Long- and short-bed pickup trucks
Hopper length	6-feet or 8-feet
Drive	BL-600 - 6.5 HP Briggs and Stratton. BL-800 - 11hp Honda, 10.5hp Briggs & Stratton or 12-volt dual electric
Materials	Salt, 50/50 salt-sand mix, sand or free-flowing granular material
Construction	Stainless steel or Carbon steel (8' Briggs model only)
Capacity (volume)	1.5 cu yd (BL-600) / 2.0 cu yd (BL-800)
Capacity (weight)	465 lbs (BL-600)
Hopper width	50" (BL-600)
Hopper height	34" (BL-600)
Hopper material	Stainless Steel / 16 gauge stainless steel / 14 gauge carbon steel
Warranty (spec table)	1 year

Source: Meyer Base Line 600 & 800 page.

Meyer insert spreader

Meyer Elite Pickup Truck

Premium insert spreader in 5, 6 and 8 foot lengths with ten power and size choices.

0.5-2.0cu yd

30'max spread

10models

• Gas, 12-volt electric or central hydraulic drive
• 14-inch poly spinner, spread pattern up to 30 feet
• Ten-year warranty on the poly idler
• Gas springs hold the engine shroud open for service

Full specifications

Vehicle	Pickup Truck
Hopper length	5' (LPV), 6' (PV), 8' (PV)
Materials	Salt, 50/50 salt-sand, sand
Construction	Stainless Steel
Capacity (volume)	0.5 cu yd / 1.5 cu yd / 2.0 cu yd
Capacity (weight)	600 lbs / 875 lbs / 890 lbs
Spread width	3' - 30' / 4' - 30'
Hopper width	37" / 50"
Hopper depth	60" / 72" / 96"
Hopper height	25" / 36"
Hopper material	Carbon Steel / Stainless steel
Spinner diameter	14"
Spinner material	Poly
Warranty (spec table)	1 year

Source: Meyer Elite Pickup Truck page.

Meyer insert spreader

Meyer Elite Cab & Chassis

High-capacity stainless steel insert hopper for cab and chassis trucks, in 3.5 and 4.5 cubic yard sizes.

3.5-4.5cu yd

8' and 10'lengths

8models

• Stainless steel hopper in 8 and 10 foot lengths
• Gas, electric or central hydraulic drive
• Fewer moving parts to maintain
• Poly spinner attaches and detaches easily

Full specifications

Vehicle	Cab & Chassis
Hopper length	8' and 10'
Materials	Salt, 50/50 salt-sand, sand
Construction	Stainless Steel
Capacity (volume)	3.5 cu yd / 4.5 cu yd
Capacity (weight)	1,100 lbs / 1,200 lbs
Spread width	4' - 30'
Hopper width	70"
Hopper depth	120" / 96"
Hopper height	46"
Hopper material	Stainless Steel
Spinner diameter	14"
Spinner material	Poly
Warranty (spec table)	1 year

Source: Meyer Elite Cab & Chassis page.

Meyer insert spreader

Meyer Elite Utility Vehicle

Stainless steel insert spreader sized for the bed of most utility vehicles.

0.3-0.4cu yd

3' and 4'lengths

5models

• Sealed 12-volt electric motor
• Fits easily into the back of most utility vehicles
• Stainless steel hopper cuts maintenance
• Ten-year warranty on the poly idler assembly

Full specifications

Vehicle	UTV
Hopper length	3' and 4'
Materials	Salt, 50/50 salt-sand, sand
Construction	Stainless Steel
Capacity (volume)	0.3 cu yd / 0.4 cu yd
Capacity (weight)	400 lbs / 450 lbs
Spread width	3' - 30'
Hopper width	37" / 50"
Hopper depth	36" / 48"
Hopper height	25" / 36"
Hopper material	Stainless Steel
Spinner diameter	14"
Spinner material	Poly
Warranty (spec table)	1 year

Source: Meyer Elite Utility Vehicle page.

Meyer insert spreader

Meyer Polyhawk

Polyethylene insert hopper with a drag-chain system for sand, salt mix and aggregate.

1.5-2.0cu yd

6' and 8'lengths

30'max spread

• Hopper made of polyethylene
• Honda or Briggs & Stratton gas, electric or central hydraulic drive
• Two internal and four external baffle adjustments
• Drag chain suits aggregate and less free-flowing material

Full specifications

Vehicle	3/4-to-1 ton pickup trucks
Hopper length	6-feet & 8-feet
Materials	Salt, 50/50 salt-sand, sand
Construction	Polyethylene
Capacity (volume)	2.0 cu yd
Capacity (weight)	5400 lbs
Spread width	4' - 30'
Empty weight	776 lbs / 850 lbs / 855 lbs
Hopper width	50"
Hopper depth	96"
Hopper height	35"
Hopper material	Poly
Spinner diameter	13"
Spinner material	Poly
Warranty (spec table)	1 year

Source: Meyer Polyhawk page.

Meyer tailgate spreader

Meyer Base Line Tailgate

Poly tailgate spreader for SUVs, light pickups, tractors and utility vehicles with a 2-inch receiver hitch.

400 lbscapacity

25'spread width

2"receiver hitch

• Rust-proof high-density polyurethane hopper
• 1/6 hp direct drive motor with variable speed controller
• Locking, moisture-resistant lid
• Tubular-steel motor guard doubles as a storage stand

Full specifications

Model in spec table	BL-400
Fits	Most SUVs, light pick-up trucks, tractors, and utility vehicles
Hitch	2-inch receiver hitch
Capacity (volume)	6.3 cu ft
Capacity (weight)	400 lbs
Spread width	3' - 25'
Empty weight	103 lbs
Hopper width	28"
Hopper depth	28"
Hopper height	36"
Hopper material	Poly
Spinner diameter	9"
Spinner material	Poly
Warranty (spec table)	2 years

Source: Meyer Base Line 240/400 page.

Meyer tailgate spreader

Meyer Blaster

Quick-Hitch tailgate spreader in 350S and 750RS sizes, with one-person hookup.

6.5-12.8cu ft

350-750 lbscapacity

5 yrwarranty, registered online

• Quick-Hitch mount for one-person attachment and removal
• Integrated wheels for loading and storage
• Patented brush auger prevents ice melt leakage
• Stainless spinner and weatherproof connections

Full specifications

Mount	Quick-Hitch Attachment System
Capacity (volume)	6.5 cu ft / 12.8 cu ft
Capacity (weight)	350 lbs / 750 lbs
Spread width	3' - 20'
Empty weight	185 lbs / 235 lbs
Hopper width	49"
Hopper depth	24"
Hopper height	35.5"
Hopper material	Poly
Spinner diameter	9"
Spinner material	Stainless Steel
Warranty (spec table)	5 years when registered online

Source: Meyer Blaster page.

Meyer dump truck spreader

Meyer Base Line 960

Stainless steel under-tailgate spreader tied into the dump truck central hydraulics.

4' to 40'spread

18"poly spinner

96"body width

• Stainless steel under-tailgate spreader for medium-duty dump trucks
• 18-inch poly spinner, four to 40 foot spread
• Hydraulic safety interlock system
• Center-discharge 960CD model for parking lots

Full specifications

Vehicle	Medium-duty dump trucks
Dump body width	96-inches
Drive	Hydraulic
Materials	Salt, 50/50 salt-sand mix, sand, free-flowing materials
Construction	Stainless steel
Spread width	4' - 40'
Empty weight	450 lbs
Hopper width	96"
Hopper depth	18"
Hopper height	19"
Hopper material	Stainless Steel
Spinner diameter	18"
Spinner material	Poly
Warranty (spec table)	1 year

Source: Meyer Base Line 960 page.

Meyer dump truck spreader

Meyer Cross Conveyor

Under-tailgate conveyor for asphalt, sand and granular material, with an optional spinner for snow and ice.

102"width

240tons/hr flow rate

2,500 lbscapacity

• Screw-type gate jacks adjust output while loaded
• Standard 24-inch extension mounts on either side
• Optional spinner attachment for snow and ice
• Optional four-foot motorized conveyor extension

Full specifications

Vehicle	Medium-duty dump trucks
Width	102 inches
Flow rate	240 tons/hr.
Drive	Central hydraulics
Materials	Asphalt, granular materials
Construction	Carbon steel
Capacity (volume)	27 cu ft
Capacity (weight)	2500 lbs
Empty weight	1100 lbs
Hopper width	96"
Hopper height	12"
Hopper material	Steel
Spinner diameter	18"
Spinner material	Poly
Warranty (spec table)	1 year

Source: Meyer Cross Conveyor page.

Meyer dump truck spreader

Meyer RTG Premium

Replaceable tailgate spreader with a 12-volt electric auger and center or left-end drop.

4' to 40'spread

18"spinner

540 lbsempty

• Replaces the dump truck tailgate and leaves ground clearance for the spinner
• Separate motor controls for auger and spinner
• Center or left-end (driver's side) drop
• Wireless controls

Full specifications

Vehicle	Medium-duty dump trucks
Dump body width	RTG: 78-84 inches, RTG-XL: 84-90 inches
Drive	Electric
Materials	Salt, 50/50 salt-sand mix, sand
Construction	Stainless steel
Spread width	4' - 40'
Empty weight	540 lbs
Hopper width	96"
Hopper depth	16.5"
Hopper height	23"
Hopper material	Stainless Steel
Spinner diameter	18"
Spinner material	Poly
Warranty (spec table)	1 year

Source: Meyer RTG Premium page.

Meyer dump truck spreader

Meyer UTG Premium

Heavier-gauge stainless steel under-tailgate spreader with hydraulic or electric drive.

4' to 40'spread

18"spinner

450-571 lbsempty

• Mounts under the tailgate, with no need to replace the tailgate
• Direct-drive or gearbox-drive hydraulic models
• Electric models with separate auger and spinner motors
• Heavier gauge stainless steel than the Base Line 960

Full specifications

Vehicle	Medium-duty dump trucks
Dump body width	96-inches
Drive	Hydraulic or electric
Materials	Salt, 50/50 salt-sand mix, sand
Construction	Stainless steel
Spread width	4' - 40'
Empty weight	450 lbs / 540 lbs / 571 lbs
Hopper width	96"
Hopper depth	18"
Hopper height	19"
Hopper material	Mild Steel / Stainless Steel
Spinner diameter	18"
Spinner material	Poly
Warranty (spec table)	1 year

Source: Meyer UTG Premium page.

Meyer walk-behind

Meyer 100 lb Drop Spreader

Walk-behind drop spreader for turf crews and winter maintenance, with exact placement.

100 lbhopper

13"air-filled tires

1agitator

• Heavy-gauge stainless steel hopper
• Aggressive agitator breaks up ice melt clumps
• Solid linkage controls, with no cables to stretch
• 13-inch high-traction air-filled tires

Full specifications

Capacity	100 lb heavy-gauge stainless steel hopper
Tires	13” high-traction air-filled tires for winter or turf use
Rims	Rustproof poly rims

Source: Meyer 100 lb Drop Spreader page.

Meyer walk-behind

Meyer 8 Gallon Power Sprayer

Battery-powered walk-behind sprayer for weed treatment and liquid de-icing.

8 galtank

1.3 GPMpump at 100 PSI

4 hrsruntime

• 8-gallon tank with a stainless steel frame
• 1.3 GPM pump at a regulated 100 PSI
• 9.5 ft hose with up to 20 ft spray pattern
• T-Jet nozzle with a 30-inch application spread

Full specifications

Capacity	8-gallon tank capacity (75–100 lbs of liquid material)
Pump	1.3 GPM pump rate at regulated 100 PSI
Hose and spray pattern	9.5 ft hose with up to 20 ft spray pattern
Runtime	Up to 4 hours runtime (battery dependent)
Tires	13” Snow Hog tires for rugged terrain mobility

Source: Meyer 8 Gallon Power Sprayer page.

Meyer walk-behind

Meyer 70 lb Salt Spreader

Compact walk-behind spreader for sidewalks, driveways and tight commercial spaces.

70 lbhopper

12' to 15'spread pattern

13"tires

• Rustproof poly hopper on a stainless steel frame
• Three-sided poly deflector for directional control
• Self-lubricating Nylatron gears
• One-touch on/off system

Full specifications

Capacity	70 lb hopper capacity
Spread pattern	12’–15’ spread pattern
Tires	13” Snow Hog tread pneumatic tires with rustproof rims
Frame	Stainless steel frame construction

Source: Meyer 70 lb Salt Spreader page.

Nothing matches those filters. Clear filters

Built into Meyer plows and spreaders

• 

  01Nite Saber LED lights

  Lot Pro LD, Super-V3 and Super Blade plows carry Nite Saber LED lights. The maker says they are brighter than standard lights, last longer and draw less power.

• 

  02Pistol grip controller

  Meyer controllers show diagnostics and offer Hands-Free Plowing, which uses the shift lever to raise and lower the blade, plus double-click buttons that finish a move.

• 

  03Locking double-acting cylinders

  On the Super-V3, locking cylinders hold the blade angle so you can back drag snow with the wings set the way you want.

• 

  04Two-piece plug

  The Super-V3 connects to the truck through a patented two-piece plug, which the maker says is faster than a three-plug connector.

• 

  05Field adjustable trip springs

  Super-V3 trip springs adjust where you are plowing, so a change does not mean a trip back to the shop.

• 

  06Crossfire work light

  The Crossfire insert spreader has an integrated work light that lights the spread area and helps during maintenance.