McHale Baler Dealer in Central New York

Name: Clinton Tractor & Implement Co.
Address: 31 Meadow St, Clinton, NY, 13323, US
Telephone: (315) 853-6151

McHale, a family firm from the West of Ireland, builds round balers, Fusion baler wrappers, bale wrappers, bale handlers, mowers, tedders and rakes. Clinton Tractor is a McHale dealer in Clinton, NY.

Call (315) 853-6151 Compare models Parts diagrams

31 Meadow St, Clinton, NY 13323
Mon–Fri 7–5, Sat 7–12
(315) 853-6151

Round balers

F5 fixed chamber balers make a 4'1" bale in an 18-roller chamber. The V6 and V8 belt balers make bales from 2' up to 5'6" and 6'3", in non-chopper, 15-knife and fully automatic versions.

McHale F5-5404’1” bale diameter · 18 chamber rollers · 80hp min. power
McHale F5-5504’1” bale diameter · 15 knives · 90hp min. power
McHale F5-5604’1” bale diameter · 25 knives · 100hp min. power
McHale F5-560 Plus4’1” bale diameter · 25 knives · 100hp min. power
McHale V6740-II2’–5’ 6” bale diameter · 3 endless belts · 73hp min. PTO power
McHale V6750-II2’–5’ 6” bale diameter · 15 knives · 80hp min. PTO power
McHale V6760-II2'–5'6" bale diameter · 15 knives · 80hp min. PTO power
McHale V8940-II2’–6’3″ bale diameter · 3 endless belts · 73hp min. PTO power
McHale V8950-II2’–6’ 3” bale diameter · 15 knives · 80hp min. PTO power
McHale V8960-II2'–6'3" bale diameter · 15 knives · 80hp min. PTO power

Integrated baler wrappers

A Fusion bales and wraps in one pass. Each model uses McHale's patented bale transfer and a vertical wrapping ring with two 750 mm dispensers; the Fusion Vario Plus pairs them with a variable chamber.

McHale Fusion 44’1” bale diameter · 25 knives max. · 115hp min. power
McHale Fusion 4 Plus4’1” bale diameter · 25 knives max. · 115hp min. power
McHale Fusion 4 Pro4’1” bale diameter · 25 knives max. · 115hp min. power
McHale Fusion Vario Plus2’–5’6″ hay/straw bale diameter · 15 knives · 114hp min. power

Bale wrappers

McHale chose to specialise in bale wrappers in 1990. The 991 round bale wrappers come trailed or on linkage, with one or two dispensers. The Orbital uses a high-speed wrapping ring, and the 998 and 995 TSR wrap square bales.

McHale 991 High Speed3’3″-5′ bale size · 30 rotations/min wrapping speed · 47 hp min. power
McHale Orbital4’9″ bale size · 40 rotations/min wrapping speed · 60 hp min. power
McHale 991 BE3’3″-5′ bale size · 30 rotations/min wrapping speed · 47 hp min. power
McHale 991 BJS3’3″-5′ bale size · 30 rotations/min wrapping speed · 47 hp min. power
McHale 991 BC3’3″-5′ bale size · 30 rotations/min wrapping speed · 47 hp min. power
McHale 991 TBER3’3″-5′ bale size · 30 rotations/min wrapping speed · 47 hp min. power
McHale 991 LBER3’3″-5′ bale size · 30 rotations/min wrapping speed · 60 hp min. power
McHale 991 LB3’3″-5′ bale size · 30 rotations/min wrapping speed · 60 hp min. power
McHale 99825 rpm max. wrap speed · 12 film rolls · 8972 lbs.
McHale 998 High Speed40 rpm max. wrap speed · 12 film rolls · 8979 lbs.
McHale 995 TSR2000 lbs max. bale weight · 30 rotations/min table speed · 2200 lbs.

Bale handlers and feeders

Loader and linkage tools for moving and feeding bales. The 691 and R5 handlers carry bales and the 994 splits them. The C4 silage feeders and straw blowers bed sheds and feed out round bales.

McHale 6912425 lbs lifting capacity · 352 lbs weight
McHale R52425 lbs lifting capacity · 352 lbs weight
McHale 9942425 lbs lifting capacity · 507 lbs weight
McHale C4301 x 1.2m (47”) bale capacity · 18 meters discharge · 120 hp min. power
McHale C4602 x 1.2m (47”) bale capacity · 18 meters discharge · 68 hp min. power
McHale C4702 x 1.5m (59”) bale capacity · 18 meters discharge · 68 hp min. power
McHale C4903 x 1.5m (59”) bale capacity · 18 meters discharge · 68 hp min. power

Mowers, tedders and rakes

Pro Glide disc mowers in rear, front, butterfly and combination layouts, ProPel tedders from 25'3" to 41'4" wide, and centre delivery rakes from 20'4" to 29'6".

McHale Pro Glide R3100-II122” cutting width · 7 discs · 108hp min. power
McHale Pro Glide F3100-II122” cutting width · 7 discs · 108hp min. power
McHale Pro Glide R310118” cutting width · 7 discs · 108 hp min. power
McHale Pro Glide B9000321″–345″ cutting width with front mower · 14 discs · 200hp min. power with front mower
McHale Pro Glide B9600358″–378″ cutting width with front mower · 16 discs · 250hp min. power with front mower
McHale Pro Glide B910359″ cutting width · 16 discs · 150 hp min. power
McHale ProPel M6-77025’3″ working width · 6 rotors · 60 hp min. power
McHale ProPel T8-102033’6″ working width · 8 rotors · 60 hp min. power
McHale ProPel T10-126041’4″ working width · 10 rotors · 67 hp min. power
McHale R62-7220’ 4” – 23’ 7” working width · 11 tine arms per rotor · 4167 lbs.
McHale R68-7822’ 4” – 25’ 7” working width · 13 tine arms per rotor · 4630 lbs.
McHale R80-9026’ 3” – 29’ 6” working width · 13 tine arms per rotor · 5805 lbs.

McHale history

Brothers Padraic and Martin McHale started the business in the West of Ireland. Padraic looks after design and manufacturing and Martin looks after sales and marketing, and both are still active in the company.

In 1990 they chose to specialise in bale wrappers, then added the Fusion baler wrapper, fixed and variable chamber balers and grassland tools. McHale says over 90% of its machines are exported, through dealers and importers in 55 countries.

1990Martin and Padraic McHale decide to specialise in bale wrappers.
2000The first load of machines leaves the new Ballinrobe facility.
2004McHale acquires a factory in Hungary.
2005The Fusion integrated baler wrapper wins a gold medal from the Royal Agricultural Society of England.
2009The V660 variable chamber belt baler is launched at Agritechnica.
2022The Fusion 4 range of integrated baler wrappers is launched.

Compare McHale machines

Search all 44 McHale machines by line, name or feature. Specs are copied from McHale's own machine pages and its 2025 variable chamber baler brochure.

Showing all 44 models

Round baler

McHale F5-540

Non-chopper fixed chamber baler

4’1”bale diameter

18chamber rollers

80hpmin. power

7,187lbs.

2.1m Profi-Flo pick-up
Twin finger non-chopper rotor
Drop floor unblocking system
18-roller bale chamber
Dual feed net system

Full specifications

Length	4.05 m (13’3″)
Width	2.55 m / 8’4″ (2.58 m / 8’6″*)
Height	2.45 m (8′)
Weight	3260 kg (7,187 lbs)
Working Width	2100 mm (6’11”)
Tine Bars	5
Tine spacing	65 mm
Short Crop Guard	Standard
Crop Roller	Optional
Pick Up Guide Wheels	Standard
Pick Up Lift	Hydraulic
Number of Knives	0
Theoretical Chop Length	N/A
Knife Protection	N/A
Knife Deactivation	N/A
Unblocking System	Drop Floor
Bale diameter	1.25 m (4’1”)
Bale width	1.23 m (4′)
Bale Chamber Feed	Non-Chopper Feed Rotor
Number of Rollers	18
Greasing	Centralised Blocks Manual
Bearings	50mm & 55mm**
Type	Net
Control	Manual or Automatic
Binding System	Dual Feed Netting System
Binding Roll Capacity	1 + 1 Storage
Net/ Film Adjustment	Manual on Baler
Gearbox	Split Drive
Main Drive Protection	Cam Clutch
Pick Up Protection	Slip Clutch
Chain Lubrication	Continuous
Control System	Wizard Control Console
Operation	Semi Automatic
Density Adjustment	On Baler Valve
Camera	N/A
Axle	8 Stud
Tyres Standard	340/75 – 17
Tyres Optional	500/50 – 17
Bale Discharge Sensor	N/A
Minimum Hydraulic Flow	35 Litres / min at 180 bar
Hydraulics	2 Double Acting Spools
Min. tractor power	60kW (80hp)

Source: McHale F5-540 page.

Round baler

McHale F5-550

15-knife fixed chamber baler

4’1”bale diameter

15knives

90hpmin. power

7,716lbs.

2.1m Profi-Flo pick-up
15-knife chopper rotor
Automatic progressive greasing
18-roller bale chamber
Continuous oiler system

Full specifications

Length	4.05 m (13’3″)
Width	2.55 m / 8’4″ (2.58 m / 8’6″*)
Height	2.45 m (8′)
Weight	3500 kg (7,716 lbs)
Working Width	2100 mm (6’11”)
Tine Bars	5
Tine spacing	65 mm
Short Crop Guard	Standard
Crop Roller	Optional
Pick Up Guide Wheels	Standard
Pick Up Lift	Hydraulic
Number of Knives	15
Theoretical Chop Length	65 mm
Knife Protection	Hydraulic
Knife Deactivation	Hydraulic from Cab
Unblocking System	Drop Floor
Bale diameter	1.25 m (4’1”)
Bale width	1.23 m (4′)
Bale Chamber Feed	15 Knife Chopper Feed Rotor
Number of Rollers	18
Greasing	Automatic Progressive
Bearings	50mm & 55mm**
Type	Net
Control	Manual or Automatic
Binding System	Dual Feed Netting System
Binding Roll Capacity	1 + 1 Storage
Net/ Film Adjustment	Manual on Baler
Gearbox	Split Drive
Main Drive Protection	Cam Clutch
Pick Up Protection	Slip Clutch
Chain Lubrication	Continuous
Control System	iControl 5 or ISOBUS/ ISO-Play (Optional)
Operation	Semi Automatic
Density Adjustment	In-cab
Camera	Optional
Axle	8 Stud
Tyres Standard	500/50 – 17
Tyres Optional	500/50 – 22.5
Bale Kicker Indicator	Optional
Minimum Hydraulic Flow	35 Litres / min at 180 bar
Hydraulics	2 Double Acting Spools
Min. tractor power	67kW (90hp)

Source: McHale F5-550 page.

Round baler

McHale F5-560

25-knife fully automatic fixed chamber baler

4’1”bale diameter

25knives

100hpmin. power

8,157lbs.

2.1m Profi-Flo pick-up
25-knife chopper rotor
Load sensing hydraulics
ISOBUS / ISO-PLAY control
Automatic progressive greasing

Full specifications

Length	4.05 m (13’3″)
Width	2.58 m (8’6″)
Height	2.45 m (8′)
Weight	3700 kg (8,157 lbs)
Working Width	2100 mm (6’11”)
Tine Bars	5
Tine spacing	65 mm
Short Crop Guard	Standard
Crop Roller	Optional
Pick Up Guide Wheels	Standard
Pick Up Lift	Hydraulic
Number of Knives	25
Theoretical Chop Length	46 mm
Knife Protection	Hydraulic
Knife Deactivation	Hydraulic from Cab
Unblocking System	Drop Floor
Bale diameter	1.25 m (4’1”)
Bale width	1.23 m (4′)
Bale Chamber Feed	25 Knife Chopper Feed Rotor
Number of Rollers	18
Greasing	Automatic Progressive
Bearings	50mm & 55mm**
Type	Net
Control	Manual, Semi-Auto or Automatic
Binding System	Dual Feed Netting System
Binding Roll Capacity	1 + 1 Storage
Net/ Film Adjustment	In Cab
Gearbox	Split Drive
Main Drive Protection	Cam Clutch
Pick Up Protection	Slip Clutch
Chain Lubrication	Continuous
Control System	ISOBUS/ ISO-Play
Operation	Fully Automatic
Density Adjustment	In-cab
Camera	1 x Camera
Axle	8 Stud
Tyres Standard	500/50-22.5
Tyres Optional	520/55-22.5
Bale Discharge Sensor	Standard
Minimum Hydraulic Flow	45 Litres / min at 180 bar
Hydraulics	Open, Closed or Load Sensing
Min. tractor power	75kW (100hp)

Source: McHale F5-560 page.

Round baler

McHale F5-560 Plus

25-knife chopper baler with film binding

4’1”bale diameter

25knives

100hpmin. power

8,488lbs.

Film binding applies film to the barrel of the bale
Net can be used for hay or straw
25-knife chopper rotor
Load sensing hydraulics
18-roller bale chamber

Full specifications

Length	4.05 m (13’3″)
Width	2.58 m (8’6″)
Height	2.45 m (8′)
Weight	3850 kg (8,488 lbs)
Working Width	2100 mm (6’11”)
Tine Bars	5
Tine spacing	65 mm
Short Crop Guard	Standard
Crop Roller	Optional
Pick Up Guide Wheels	Standard
Pick Up Lift	Hydraulic
Number of Knives	25
Theoretical Chop Length	46 mm
Knife Protection	Hydraulic
Knife Deactivation	Hydraulic from Cab
Unblocking System	Drop Floor
Bale diameter	1.25 m (4’1”)
Bale width	1.23 m (4′)
Bale Chamber Feed	25 Knife Chopper Feed Rotor
Number of Rollers	18
Greasing	Automatic Progressive
Bearings	50mm & 55mm**
Type	Net or Film
Control	Manual, Semi-Auto or Automatic
Binding System	Infinite Stretch Binding
Binding Roll Capacity	1 + 1 Storage
Net/ Film Adjustment	In Cab
Gearbox	Split Drive
Main Drive Protection	Cam Clutch
Pick Up Protection	Slip Clutch
Chain Lubrication	Continuous
Control System	ISOBUS/ ISO-Play
Operation	Fully Automatic
Density Adjustment	In-cab
Camera	2x Camera
Axle	8 Stud
Tyres Standard	500/50-22.5
Tyres Optional	520/55-22.5
Bale Discharge Sensor	Standard
Minimum Hydraulic Flow	45 Litres / min at 180 bar
Hydraulics	Open, Closed or Load Sensing
Min. tractor power	75kW (100hp)

Source: McHale F5-560 Plus page.

Round baler

McHale V6740-II

Non-chopper variable chamber baler

2’–5’ 6”bale diameter

3endless belts

73hpmin. PTO power

9,766lbs.

2.1m Profi-Flo pick-up
High intake twin finger feed rotor
Drop floor unblocking system
Expert Plus control console
3 endless belts, single belt optional

Full specifications

Length	5.1m (16’ 9”)*
Width	2.54m / 2.58m (8’ 4” / 8’ 6”)*
Height	2.75m (9’)
Weight	4430kg (9,766 lbs)*
Working Width	2100mm (6’ 11”)
Tine Bars	5 (6 on Camless Pick-up)
Tine Spacing	67mm (2⅝”) 55mm camless (2⅛”)
Crop Roller	Option
Pick Up Guide Wheels (pneumatic )	Standard
Number of Knives	0
Theoretical Chop Length	N/A
Knife Protection	N/A
Knife Deactivation	N/A
Unblocking System	Drop Floor
Bale diameter	0.6 m (2’) to 1.68 m (5’ 6”)
Bale width	1.23m (4’)
Bale Chamber Feed	High Intake Feed Rotor
Number of Belts	3
Binding Material	Net
Control	Manual or Automatic
Binding System	High Performance Netter
Bind Roll Capacity	1 + 2 Storage
Bind Adjustment	In Cab
Gearbox	Split Drive
Main Drive Protection	Cam Clutch
Pick-Up Protection	Slip Clutch
Chain Lubrication	Continuous
Bale chamber drive	Primary Drive
Control System	Expert Plus
Operation	Semi Automatic
Density Adjustment	In Cab
Bale Size Adjustment	In Cab
Camera	Optional
Axle	8 Stud
Brakes	Option: Air / Hydraulic
Tyres Standard	460/65/20
Tyres Optional	500/50/22.5 or 560/45/22.5
Bale Kicker	Standard
Side Tip	N/A
Road Lights	Standard
Minimum Hydraulic Flow	30 l/min @180 bar
Hydraulic System	2 double acting spools, 1 free flow return
Electronics	12 Volt DC, 20 amp
Min. tractor power	55 kW (73hp)

Source: McHale V6740-II page.

Round baler

McHale V6750-II

15-knife chopper variable chamber baler

2’–5’ 6”bale diameter

15knives

80hpmin. PTO power

10,009lbs.

15-knife chopper with heavy-duty rotor
Double drive bale chamber
ISOBUS / ISO-PLAY control
Knife pressure display and knife position sensor
Drop floor sensor

Full specifications

Length	5.1m (16’ 9”)*
Width	2.54m / 2.58m (8’ 4” / 8’ 6”)*
Height	2.75m (9’)
Weight	4540kg (10,009 lbs)*
Working Width	2100mm ( 6′ 11″)
Tine Bars	5 (6 on Camless Pick-up)
Tine Spacing	67mm (2⅝”) 55mm camless (2⅛”)
Crop Roller	Standard
Pick Up Guide Wheels (pneumatic)	Standard
Number of Knives	15
Theoretical Chop Length	65mm
Knife Protection	Hydraulic
Knife Deactivation	Hydraulic from Cab
Unblocking System	Drop Floor
Bale diameter	0.6 m (2’) to 1.68 m (5’ 6”)
Bale width	1.23m (4’)
Bale Chamber Feed	15 Knife Chopper Feed Rotor
Number of Belts	3
Binding Material	Net
Control	Automatic or Manual
Binding System	High Performance Netter
Bind Roll Capacity	1+2 Storage
Bind Adjustment	In Cab
Gearbox	Split Drive
Main Drive Protection	Cam Clutch
Pick – Up Protection	Slip Clutch
Chain Lubrication	Continuous
Bale chamber drive	Double Drive
Control System	ISOBUS/ISOPlay
Operation	Semi Automatic
Density Adjustment	In Cab
Bale Size Adjustment	In Cab
Camera	Optional
Axle	8 Stud
Brakes	Option: Air / Hydraulic
Tyres Standard	500/50/22.5
Tyres Optional	560/45/22.5
Bale Kicker	Standard
Side Tip	N/A
Road Lights	Standard
Minimum Hydraulic Flow	30 l/min @180 bar
Hydraulic System	2 double acting spools, 1 free flow return
Electronics	12 Volt DC, 20 amp
Min. tractor power	60 kW (80hp)

Source: McHale V6750-II page.

Round baler

McHale V6760-II

Fully automatic chopper baler

2'–5'6"bale diameter

15knives

80hpmin. PTO power

10,097lbs.

15-knife chopper unit and heavy-duty rotor
Fully automatic operation
ISOBUS compatible, ISO-Play terminals optional
Automatic drop floor on an ISOBUS tractor
Hydraulic bale kicker

Full specifications

Bale diameter	0.6–1.68m (2'–5'6")
Bale width	1.23m (4')
Bale Chamber Feed	15 Knife Chopper Feed Rotor
Number of Belts	3
Number of Knives	15
Theoretical Chop Length	65mm
Knife Protection	Hydraulic
Knife Activation	Electronic Control
Unblocking System	Automatic Drop Floor**
Working Width	2100mm (6'11")
Tine Bars	5 (6 on Camless Pick-up)
Tine Spacing	67mm (2⅝") / 55mm camless (2⅛")
Crop Roller	Standard
Pick-Up Guide Wheels (pneumatic)	Standard
Binding Material	Net
Control	Automatic or Manual
Binding System	High Performance Netter
Bind Roll Capacity	1 + 2 Storage
Bind Adjustment	In Cab
Gearbox	Split Drive
Main Drive Protection	Cam Clutch
Pick-Up Protection	Slip Clutch
Chain Lubrication	Continuous
Bale chamber drive	Double Drive
Control System	ISOBUS
Operation	Fully Automatic
Density Adjustment	In Cab
Bale Size Adjustment	In Cab
Camera	1
Axle	8 Stud
Brakes	Option: Air / Hydraulic
Tyres Standard	500/50/22.5
Tyres Optional	560/45/22.5
Bale Kicker	Hydraulic
Side Tip	N/A
Road Lights	Standard
Length	5.1m* (16'9")
Width	2.54 / 2.58* (8'4" / 8'6")
Height	2.75m (9')
Weight	4,580kg* (10,097 lbs)
Minimum Hydraulic Flow	30 Litres / min at 180 bar
Hydraulic System	Open Centre, Closed Centre or Load Sensing
Electronics	12 Volt DC, 20 amp
Min. tractor power	60 kW (80hp)

Source: McHale Variable Chamber Baler brochure 2025, technical table pages 55-56.

Round baler

McHale V8940-II

High-capacity non-chopper baler

2’–6’3″bale diameter

3endless belts

73hpmin. PTO power

10,450lbs.

Bales up to 1.9 m (6'3")
High intake feed rotor
Primary drive with 3 endless belts
Expert Plus control console
Drop floor unblocking system

Full specifications

Length	5.1m (16’ 9”)*
Width	2.58m / 2.62m (8’ 6” / 8’ 7”)*
Height	3.12m (10’ 3″)
Weight	4740kg (10,450 lbs)*
Working Width	2100 mm (6’11”)
Pick Up Guide Wheels	Standard
Crop Roller	Optional
Short Crop Guard	Standard
Tine spacing	70 mm
Tine Bars	5 (6 on camless)
Number of Knives	0
Theoretical Chop Length	N/A
Knife Protection	N/A
Knife Deactivation	N/A
Unblocking System	Drop Floor
Bale width	1.23 m
Bale diameter	0.6 m (2’) to 1.9 m
Number of Belts	3
Bale Chamber Feed	High Intake Feed Rotor
Net Adjustment	In Cab
Net System	High Performance Netter
Net Roll Capacity	1+2 Storage
Control	Manual or Automatic
Gearbox	Split Drive
Main Drive Protection	Cam Clutch
Pick – Up Protection	Slip Clutch
Chain Lubrication	Continuous
Bale chamber drive	Primary Drive
Control System	Expert Plus
Operation	Semi Automatic
Density Adjustment	In Cab
Bale Size Adjustment	In Cab
Axle	8 Stud
Brakes	Option: Air / Hydraulic
Tyres Standard	460/65/20
Tyres Optional	500/50/22.5 or 560/45/22.5
Bale Kicker	Adjustable
Road Lights	Standard
Minimum Hydraulic Flow	30 l/min @180 bar
Hydraulic System	2 double acting spools, 1 free flow return
Electronics	12 Volt DC, 20 amp
Min. tractor power	55 kW (73hp)

Source: McHale V8940-II page.

Round baler

McHale V8950-II

15-knife high-capacity variable chamber baler

2’–6’ 3”bale diameter

15knives

80hpmin. PTO power

10,692lbs.

Bales up to 1.9 m (6'3")
15-knife chopper feed rotor
Double drive bale chamber
ISOBUS / ISO-PLAY control
Bale kicker

Full specifications

Length	5.1m (16’ 9”)*
Width	2.58m / 2.62m (8’ 6” / 8’ 7”)*
Height	3.12m (10’ 3″)
Weight	4850kg (10,692 lbs)*
Working Width	2100mm (6’ 11”)
Tine Bars	5 (6 on Camless Pick-up)
Tine Spacing	70 mm
Short Crop Guard	Option
Crop Roller	Standard
Pick Up Guide Wheels (pneumatic)	Standard
Number of Knives	15
Theoretical Chop Length	65 mm
Knife Protection	Hydraulic
Knife Deactivation	Hydraulic from Cab
Unblocking System	Drop Floor
Bale diameter	0.6 m (2’) to 1.9 m (6’ 3”)
Bale width	1.23 m (4’)
Bale Chamber Feed	15 Knife Chopper Feed Rotor
Number of Belts	3
Control	Manual or Automatic
Net System	High Performance Netter
Net Roll Capacity	1 + 2 Storage
Net Adjustment	In Cab
Gearbox	Split Drive
Main Drive Protection	Cam Clutch
Pick-Up Protection	Slip Clutch
Chain Lubrication	Continuous
Bale chamber drive	Double Drive
Control System	Expert Plus
Operation	Semi-Automatic
Density Adjustment	In Cab
Bale Size Adjustment	In Cab
Axle	8 Stud
Brakes	Option: Air / Hydraulic
Tyres Standard	500/50/22.5
Tyres Optional	560/45/22.5
Bale Kicker	Adjustable
Road Lights	Standard
Minimum Hydraulic Flow	30 l/min @180 bar
Hydraulic System	2 double acting spools, 1 free flow return
Electronics	12 Volt DC, 20 amp
Min. tractor power	60 kW (80hp)

Source: McHale V8950-II page.

Round baler

McHale V8960-II

Fully automatic high-capacity chopper baler

2'–6'3"bale diameter

15knives

80hpmin. PTO power

10,780lbs.

Bales up to 1.9 m (6'3")
15-knife chopper unit and heavy-duty rotor
Fully automatic operation
ISOBUS compatible, ISO-Play terminals optional
Hydraulic bale kicker

Full specifications

Bale diameter	0.6–1.9m (2'–6'3")
Bale width	1.23m (4')
Bale Chamber Feed	15 Knife Chopper Feed Rotor
Number of Belts	3
Number of Knives	15
Theoretical Chop Length	65mm
Knife Protection	Hydraulic
Knife Activation	Electronic Control
Unblocking System	Automatic Drop Floor**
Working Width	2100mm (6'11")
Tine Bars	5 (6 on Camless Pick-up)
Tine Spacing	67mm (2⅝") / 55mm camless (2⅛")
Crop Roller	Standard
Pick-Up Guide Wheels (pneumatic)	Standard
Binding Material	Net
Control	Automatic or Manual
Binding System	High Performance Netter
Bind Roll Capacity	1 + 2 Storage
Bind Adjustment	In Cab
Gearbox	Split Drive
Main Drive Protection	Cam Clutch
Pick-Up Protection	Slip Clutch
Chain Lubrication	Continuous
Bale chamber drive	Double Drive
Control System	ISOBUS
Operation	Fully Automatic
Density Adjustment	In Cab
Bale Size Adjustment	In Cab
Camera	1
Axle	8 Stud
Brakes	Option: Air / Hydraulic
Tyres Standard	500/50/22.5
Tyres Optional	560/45/22.5
Bale Kicker	Hydraulic
Side Tip	N/A
Road Lights	Standard
Length	5.1m* (16'9")
Width	2.58 / 2.62* (8'6" / 8'7")
Height	3.12m (10'3")
Weight	4,890kg* (10,780 lbs)
Minimum Hydraulic Flow	30 Litres / min at 180 bar
Hydraulic System	Open Centre, Closed Centre or Load Sensing
Electronics	12 Volt DC, 20 amp
Min. tractor power	60 kW (80hp)

Source: McHale Variable Chamber Baler brochure 2025, technical table pages 55-56.

Baler wrapper

McHale Fusion 4

Integrated baler wrapper

4’1”bale diameter

25knives max.

115hpmin. power

12,787lbs.

Patented bale transfer
Vertical wrapping ring with film break sensors
25-knife heavy-duty feed rotor
Expert Plus control console
4 bar pivot stretch netter

Full specifications

Length	5.8 m (19′)
Width	2.76 / 2.94 m* (9′ – 9’8″)*
Height	3.02 m (9’10”)
Weight	5800 kgs (12,787 lbs)
Working Width	2100mm (6’11”)
Tine Bars	5 (Camless Option with 6)
Tine Spacing	Camtrack: 67mm (2 5/8 ”) Camless: 55mm (2 1/8 ”)
Pick Up Lift	Hydraulic
Pick Up Guide Wheels (pneumatic)	Standard – with Fold Back
Maximum Number of Knives	25
Theoretical Chop Length	46 mm (1 3/4 ”)
Unblocking System	Drop Floor
Knife Control	Electronic from Tractor Cab
Knife Protection	Hydraulic & Mechanical
Auto Knife Drop	Not Available
Number of Rollers	18
Bale width	1.23 m (4′)
Bale diameter	1.25 m (4’1”)
Greasing	Progressive (Standard)
Bearings	55 mm**
Type	Net
Layer Adjustment	Manual on Baler
Net or NRF Roll Capacity	4
Binding System	Pivot Stretch Netter (4 bar)
Control	Manual or Automatic
System	Vertical Wrapping Ring
Film Storage	10 Rolls & 2 on the Wrapper
Film Layers	2+2+2 System
Dispensers	2 x 750 mm
Film Stretch	70% standard (55% optional)
Pre & Post Roll	Not Available
Bale Tip Adjustment	Manual
Pick Up Protection	Slip Clutch
Main Drive Protection	Cam Clutch
Gearbox	Split Drive
Chain Lubrication	Automatic (Standard)
Density Adjustment	On Baler Valve
Operation	Fully Automatic Electronic
Control System	Expert Plus
Inbuilt Cameras	Not Available
Axle	8 stud
Tyre Sizes	560/60R 22.5 (standard)
Electronics	12 Volt DC, 20 amp approx.
Road Lights	Standard
Minimum Hydraulic Flow	45 l/min @ 180 bar
Hydraulic System	Open, Closed or Load Sensing
Min. tractor power	85kW (115hp)

Source: McHale Fusion 4 page.

Baler wrapper

McHale Fusion 4 Plus

Integrated baler wrapper with film binding

4’1”bale diameter

25knives max.

115hpmin. power

13,117lbs.

Film or net binding on the barrel of the bale
Patented bale transfer
Vertical wrapping ring with film break sensors
25-knife heavy-duty feed rotor
ISOBUS compatibility

Full specifications

Length	5.8 m (19′)
Width	2.76 / 2.94 m* (9′ – 9’8″)*
Height	3.02 m (9’10”)
Weight	5950 kgs (13,117 lbs)
Working Width	2100mm (6’11”)
Tine Bars	5 (Camless Option with 6)
Tine Spacing	Camtrack: 67mm (2 5/8 ”) Camless: 55mm (2 1/8 ”)
Pick Up Lift	Hydraulic
Pick Up Guide Wheels (pneumatic)	Standard – with Fold Back
Maximum Number of Knives	25
Theoretical Chop Length	46 mm (1 3/4 ”)
Unblocking System	Automatic Drop Floor
Knife Control	Electronic from Tractor Cab
Knife Protection	Hydraulic & Mechanical
Auto Knife Drop	Standard
Number of Rollers	18
Bale width	1.23 m (4′)
Bale diameter	1.25 m (4’1”)
Greasing	Progressive (Standard)
Bearings	55 mm**
Type	NRF or Net
Layer Adjustment	In-Cab
Net or NRF Roll Capacity	4
Binding System	Infinite Stretch
Control	Manual or Automatic
System	Vertical Wrapping Ring
Film Storage	10 Rolls & 2 on the Wrapper
Film Layers	2+2+2 System
Dispensers	2 x 750 mm
Film Stretch	70% standard (55% optional)
Pre & Post Roll	Standard
Bale Tip Adjustment	Electronic from Tractor Cab
Pick Up Protection	Slip Clutch
Main Drive Protection	Cam Clutch
Gearbox	Split Drive
Chain Lubrication	Automatic (Standard)
Density Adjustment	In-Cab
Operation	Fully Automatic Electronic
Control System	ISOBUS (Optional ISO-PLAY)
Inbuilt Cameras	2x Inbuilt Camera
Axle	8 stud
Tyre Sizes	560/60R 22.5 (standard)
Electronics	12 Volt DC, 20 amp approx.
Road Lights	Standard
Minimum Hydraulic Flow	45 l/min @ 180 bar
Hydraulic System	Open, Closed or Load Sensing
Min. tractor power	85kW (115hp)

Source: McHale Fusion 4 Plus page.

Baler wrapper

McHale Fusion 4 Pro

ISOBUS integrated baler wrapper

4’1”bale diameter

25knives max.

115hpmin. power

12,897lbs.

Controlled using ISOBUS
In-cab net and density adjustment
Camera
Patented bale transfer and vertical wrapping ring
4 bar pivot stretch netter

Full specifications

Length	5.8 m (19′)
Width	2.76 / 2.94 m* (9′ – 9’8″)*
Height	3.02 m (9’10”)
Weight	5850 kgs (12,897 lbs)
Working Width	2100mm (6’11”)
Tine Bars	5 (Camless Option with 6)
Tine Spacing	Camtrack: 67mm (2 5/8 ”) Camless: 55mm (2 1/8 ”)
Pick Up Lift	Hydraulic
Pick Up Guide Wheels (pneumatic)	Standard – with Fold Back
Maximum Number of Knives	25
Theoretical Chop Length	46 mm (1 3/4 ”)
Unblocking System	Automatic Drop Floor
Knife Control	Electronic from Tractor Cab
Knife Protection	Hydraulic & Mechanical
Auto Knife Drop	Standard
Number of Rollers	18
Bale width	1.23 m (4′)
Bale diameter	1.25 m (4’1”)
Greasing	Progressive (Standard)
Bearings	55 mm**
Type	Net
Layer Adjustment	In-Cab
Net or NRF Roll Capacity	4
Binding System	Pivot Stretch Netter (4 bar)
Control	Manual or Automatic
System	Vertical Wrapping Ring
Film Storage	10 Rolls & 2 on the Wrapper
Film Layers	2+2+2 System
Dispensers	2 x 750 mm
Film Stretch	70% standard (55% optional)
Pre & Post Roll	Standard
Bale Tip Adjustment	Electronic from Tractor Cab
Pick Up Protection	Slip Clutch
Main Drive Protection	Cam Clutch
Gearbox	Split Drive
Chain Lubrication	Automatic (Standard)
Density Adjustment	In-Cab
Operation	Fully Automatic Electronic
Control System	ISOBUS (Optional ISO-PLAY)
Inbuilt Cameras	1x Inbuilt Camera
Axle	8 stud
Tyre Sizes	560/60R 22.5 (standard)
Electronics	12 Volt DC, 20 amp approx.
Road Lights	Standard
Minimum Hydraulic Flow	45 l/min @ 180 bar
Hydraulic System	Open, Closed or Load Sensing
Min. tractor power	85kW (115hp)

Source: McHale Fusion 4 Pro page.

Baler wrapper

McHale Fusion Vario Plus

Variable chamber integrated baler wrapper

2’–5’6″hay/straw bale diameter

15knives

114hpmin. power

14,330lbs.

Film or net binding
Single belt variable bale chamber with double drive
15-knife chopper unit with heavy-duty rotor
2x inbuilt camera system
ISOBUS / ISO-Play

Full specifications

Bale diameter	0.6 – 1.68m (2’–5’6″)
Bale width	1.23 m (4′)
Bale Chamber Feed	15 Knife Chopper Feed Rotor
Number of Belts	1
Number of Knives	15
Theoretical Chop Length	65 mm
Unblocking System	Automatic Drop Floor**
Knife Activation	Electronic Control
Knife Protection	Hydraulic
Working Width	2100mm (6’11”)
Tine Bars	5 (6 on Camless Pick-up)
Tine Spacing	67mm (2 5/8 ”) Camless: 55mm (2 1/8 ”)
Crop Roller	Standard
Pick Up Guide Wheels (pneumatic)	Standard
Binding Material	NRF or Net
Control	Automatic or Manual
Binding System	Direct Beak Binding
Bind Roll Capacity	1 + 2 Storage
Bind Adjustment	In Cab
Gearbox	Split Drive
Pick Up Protection	Slip Clutch
Main Drive Protection	Cam Clutch
Chain Lubrication	Continuous
Bale chamber drive	Double Drive
Control System	ISOBUS
Operation	Fully Automatic
Density Adjustment	In-Cab
Bale Size Adjustment	In Cab
Inbuilt Camera	2x Inbuilt Camera
Axle	8 stud
Brakes	Standard: Hydraulic (Option: Air)
Tyres Standard	650/50/22.5
Tyres Optional	680/50/22.5
Bale Kicker	N/A
Side Tip	Option
Road Lights	Standard
Length	6.3m (20’8″)
Width	2.94m (9’8″)
Height	3.3m (10’10”)
Weight	6500kg* (14,330 lbs)
Minimum Hydraulic Flow	45 l/min @ 180 bar
Hydraulic System	Open Centre, Closed Centre or Load Sensing
Electronics	12 Volt DC, 20 amp
Min. tractor power	85kW (114hp)

Source: McHale Fusion Vario Plus page.

Bale wrapper

McHale 991 High Speed

Twin dispenser trailed round bale wrapper

3’3″-5′bale size

30 rotations/minwrapping speed

47 hpmin. power

4189lbs.

Twin 750mm film dispensers
Automatic cut and hold system
Patented ground supported damper
Auto load lift arm
Carries 8 rolls of film

Full specifications

Transport Length	5.7 m (18’8″)
Transport Width	2.45 m (8’1″)
Transport Height	2.46 m (8’1″)
Height to Top of Rollers	1.25 m (4’1″)
Weight	1900 kg (4189 lbs)
Bale Size	1.52 m (3’3″-5′)
Aluminum Dispensers	2 x 750 mm
Film Stretch	70% Standard 55% Optional
Wrapping speed (up to)	30 rotations/min
Wrapping System	Turntable
Protection Mechanism	Shear Bolt
Lift Capacity @ 170 bar	1100 kg (2425 lbs)
Driver Control	Expert Control Console
Operation	Automatic & Manual
Radio Remote Control	Optional
Film roll capacity	X 8 (2+6)
Cut & Hold	Yes
Bale Wrap Monitor	Yes
Road Lights	Yes
Greasing Points	20
Wheel Dimensions	Standard: 380/55-17 Optional: 480/45-17
Axle	6 Stud
Attachment to Tractor	Pin Hitch
Min. Hydraulic Requirements	22 l/min @ 170 bar
Hydraulic Connections	2 x 1/2″ QR’s Open or Closed Centre
Electrical Requirements	12v EuroPlug, 10A or Direct from Battery
Min. tractor power	35 kW / 47 hp

Source: McHale 991 High Speed page.

Bale wrapper

McHale Orbital

High-speed wrapping ring round bale wrapper

4’9″bale size

40 rotations/minwrapping speed

60 hpmin. power

5391lbs.

Fully automatic operation
Patented high-speed bale loading
High-speed vertical wrapping ring
Gentle bale tip after wrapping
Expert Plus control console

Full specifications

Transport Length	4.35 m (14′ 3″)
Transport Width	2.74 m (9′)*
Transport Height	3.0 m (9′ 3″)
Height to Top of Rollers	N/A
Weight	2400 kg (5391 lbs)
Bale Size	1.48 m (4’9″)
Aluminum Dispensers	2 x 750 mm
Film Stretch	70% Standard 55% Optional
Wrapping speed (up to)	40 rotations/min
Wrapping System	Wrapping Ring (Fusion System)
Protection Mechanism	Relief Valve
Lift Capacity @ 170 bar	1200 kg (2646 lbs)
Driver Control	Expert Plus Control Console
Operation	Automatic & Manual
Radio Remote Control	Optional
Film roll capacity	X 8 (2+6)
Cut & Hold	Yes
Bale Wrap Monitor	Yes
Road Lights	Yes
Greasing Points	22
Wheel Dimensions	Standard: 380/55-17 Optional: 480/45-17
Axle	6 Stud
Attachment to Tractor	Pin Hitch
Min. Hydraulic Requirements	35 l/min @ 170 bar
Hydraulic Connections	2 x 1/2″ QR’s Open or Closed Centre or Load Sensing
Electrical Requirements	12v 10A EuroPlug or Direct from Battery
Min. tractor power	45 kW / 60 hp

Source: McHale Orbital page.

Bale wrapper

McHale 991 BE

Fully automatic trailed round bale wrapper

3’3″-5′bale size

30 rotations/minwrapping speed

47 hpmin. power

4123lbs.

Expert control console with fully automatic cycle
Auto load lift arm
Automatic cut and hold
Patented ground supported damper
Static wrapping with the optional remote

Full specifications

Transport Length	5.7 m (18’8″)
Transport Width	2.45 m (8′)
Transport Height	2.46 m (8’1″)
Height to Top of Rollers	1.25 m (4’1″)
Weight	1870 kg (4123 lbs)
Bale Size	1.52 m (3’3″-5′)
Aluminum Dispensers	1 x 750 mm Optional 500 mm Kit
Film Stretch	70% Standard 55% Optional
Wrapping speed (up to)	30 rotations/min
Wrapping System	Turntable
Protection Mechanism	Shear Bolt
Lift Capacity @ 170 bar	1100 kg (2425 lbs)
Driver Control	Expert Control Console
Operation	Automatic & Manual
Radio Remote Control	Optional
Film roll capacity	X 7 (1+6)
Cut & Hold	Yes
Bale Wrap Monitor	Yes
Road Lights	Yes
Greasing Points	19
Wheel Dimensions	340/55-16
Axle	6 Stud
Attachment to Tractor	Pin Hitch
Min. Hydraulic Requirements	22 l/min @ 170 bar
Hydraulic Connections	2 x 1/2″ QR’s Open or Closed Centre
Electrical Requirements	12v EuroPlug, 20A or Direct from Battery
Min. tractor power	35 kW / 47 hp

Source: McHale 991 BE page.

Bale wrapper

McHale 991 BJS

Servo joystick trailed round bale wrapper

3’3″-5′bale size

30 rotations/minwrapping speed

47 hpmin. power

4123lbs.

Single lever servo joystick control
750mm film dispenser
Hydraulically operated cut and hold
Patented ground supported damper
Shear bolt protection system

Full specifications

Transport Length	5.7 m (18’8″)
Transport Width	2.45 m (8′)
Transport Height	2.46 m (8’1″)
Height to Top of Rollers	1.25 m (4’1″)
Weight	1870 kg (4123 lbs)
Bale Size	1- 1.52 m (3’3″-5′)
Aluminum Dispensers	1 x 750 mm Optional 500 mm Kit
Film Stretch	70% Standard 55% Optional
Wrapping speed (up to)	30 rotations/min
Wrapping System	Turntable
Protection Mechanism	Shear Bolt
Lift Capacity @ 170 bar	1100 kg (2425 lbs)
Driver Control	Single lever joy stick (with Wizard Control)
Operation	Manual Only
Radio Remote Control	N/A
Film roll capacity	X 7 (1+6)
Cut & Hold	Yes
Bale Wrap Monitor	Yes
Road Lights	Yes
Greasing Points	19
Wheel Dimensions	340/55-16
Axle	6 Stud
Attachment to Tractor	Pin Hitch
Min. Hydraulic Requirements	22 l/min @ 170 bar
Hydraulic Connections	2 x 1/2″ QR’s Open or Closed Centre
Electrical Requirements	12v EuroPlug, 20A or Direct from Battery
Min. tractor power	35 kW / 47 hp

Source: McHale 991 BJS page.

Bale wrapper

McHale 991 BC

Cable controlled trailed round bale wrapper

3’3″-5′bale size

30 rotations/minwrapping speed

47 hpmin. power

4123lbs.

Entry machine in the 991 B range
4 lever cable control
Hydraulically operated cut and hold
Patented ground supported damper
Auto stop at the pre-set number of layers

Full specifications

Transport Length	5.7 m (18’8″)
Transport Width	2.45 m (8′)
Transport Height	2.46 m (8’1″)
Height to Top of Rollers	1.25 m (4’1″)
Weight	1870 kg (4123 lbs)
Bale Size	1.52 m (3’3″-5′)
Aluminium Dispensers	1 x 750 mm Optional 500 mm Kit
Film Stretch	70% Standard 55% Optional
Wrapping speed (up to)	30 rotations/min
Wrapping System	Turntable
Protection Mechanism	Shear Bolt
Lift Capacity @ 170 bar	1100 kg (2425 lbs)
Driver Control	4 Lever Cable Control (with Wizard Control)
Operation	Manual Only
Radio Remote Control	N/A
Film roll capacity	X 7 (1+6)
Cut & Hold	Yes
Bale Wrap Monitor	Yes
Road Lights	Yes
Greasing Points	19
Wheel Dimensions	340/55-16
Axle	6 Stud
Attachment to Tractor	Pin Hitch
Min. Hydraulic Requirements	22 l/min @ 170 bar
Hydraulic Connections	2 x 1/2″ QR’s Open or Closed Centre
Electrical Requirements	12v EuroPlug, 20A or Direct from Battery
Min. tractor power	35 kW / 47 hp

Source: McHale 991 BC page.

Bale wrapper

McHale 991 TBER

Single dispenser trailed static wrapper

3’3″-5′bale size

30 rotations/minwrapping speed

47 hpmin. power

2403lbs.

Fully automatic, run from the control console
Chassis carries a hydraulic power pack
Moved by a small tractor or telehandler
750mm aluminum dispenser
Hydraulically operated cut and hold

Full specifications

Transport Length	4.5 m (14’9″)
Transport Width	2 m (6’7″)
Transport Height	2.05 m (6’9″)
Height to Top of Rollers	1.01 m (3’4″)
Weight	1,090 kg (2403 lbs)
Bale Size	1.52 m (3’3″-5′)
Aluminum Dispensers	1 x 750 mm Optional 500 mm Kit
Film Stretch	70% Standard 55% Optional
Wrapping speed (up to)	30 rotations/min
Wrapping System	Turntable
Protection Mechanism	Shear Bolt
Lift Capacity @ 170 bar	N/A
Driver Control	Expert Control Console
Operation	Automatic & Manual
Radio Remote Control	Standard
Film roll capacity	X 3 (1+2)
Cut & Hold	Yes
Bale Wrap Monitor	Yes
Road Lights	Yes
Greasing Points	11
Wheel Dimensions	20.5/8-10
A xle	5 Stud
Attachment to Tractor	Pin Hitch
Min. Hydraulic Requirements	20 l/min @ 180 bar
Hydraulic Connections	2 x 1/2″ QR’s Open or Closed Centre
Electrical Requirements	12v EuroPlug, 20A or Direct from Battery
Min. tractor power	35 kW / 47 hp

Source: McHale 991 TBER page.

Bale wrapper

McHale 991 LBER

Fully automatic linkage round bale wrapper

3’3″-5′bale size

30 rotations/minwrapping speed

60 hpmin. power

1764lbs.

Fully automatic from the control console
Auto start runs the complete cycle
Radio remote control standard
750mm aluminum dispenser
Tips the bale automatically after wrapping

Full specifications

Transport Length	2.8 m (9’2″)
Transport Width	1.65 m (5’5″)
Transport Height	1.94 m (6’4″)
Height to Top of Rollers	0.83 m (2’9″)
Weight	800 kg (1764 lbs)
Bale Size	1.52 m (3’3″-5′)
Aluminum Dispensers	1 x 750 mm Optional 500 mm Kit
Film Stretch	70% Standard 55% Optional
Wrapping speed (up to)	30 rotations/min
Wrapping System	Turntable
Protection Mechanism	Shear Bolt
Lift Capacity @ 170 bar	N/A
Driver Control	Expert Control Console
Operation	Automatic & Manual
Radio Remote Control	Standard
Film roll capacity	X 3 (1+2)
Cut & Hold	Yes
Bale Wrap Monitor	Yes
Road Lights	N/A
Greasing Points	11
Wheel Dimensions	N/A
Axle	N/A
Attachment to Tractor	3 Point Linkage
Min. Hydraulic Requirements	20 l/min @ 180 bar
Hydraulic Connections	2 x 1/2″ QR’s Open or Closed Centre
Electrical Requirements	12v EuroPlug, 20A or Direct from Battery
Min. tractor power	45 kW / 60 hp

Source: McHale 991 LBER page.

Bale wrapper

McHale 991 LB

Manual linkage round bale wrapper

3’3″-5′bale size

30 rotations/minwrapping speed

60 hpmin. power

1764lbs.

Four individual levers control all functions
Tractor or independent power pack
750mm aluminum dispenser
Hydraulically operated cut and hold
Four heavy-duty endless belts on the table

Full specifications

Transport Length	2.8 m (9’2″)
Transport Width	1.65 m (5’5″)
Transport Height	1.94 m (6’4″)
Height to Top of Rollers	0.83 m (2’9″)
Weight	800 kg (1764 lbs)
Bale Size	1.52 m (3’3″-5′)
Aluminum Dispensers	1 x 750 mm Optional 500 mm Kit
Film Stretch	70% Standard 55% Optional
Wrapping speed (up to)	30 rotations/min
Wrapping System	Turntable
Protection Mechanism	Shear Bolt
Lift Capacity @ 170 bar	N/A
Driver Control	3 Lever Cable Control (with Wizard Control)
Operation	Manual Only
Radio Remote Control	N/A
Film roll capacity	x 3 (1+2)
Cut & Hold	Yes
Bale Wrap Monitor	Yes
Road Lights	N/A
Greasing Points	11
Wheel Dimensions	N/A
Axle	N/A
Attachment to Tractor	3 Point Linkage
Min. Hydraulic Requirements	20 l/min @ 180 bar
Hydraulic Connections	2 x 1/2″ QR’s Open or Closed Centre
Electrical Requirements	12v, 7A supply
Min. tractor power	45 kW / 60 hp

Source: McHale 991 LB page.

Bale wrapper

McHale 998

Square bale wrapper

25rpm max. wrap speed

12film rolls

8972lbs.

Fully automatic electronic control
PTO driven load sensing hydraulics
Patented oscillating rollers
2 x 750mm dispensers
12 roll film storage

Full specifications

Transport Length	7.3 m (24′)
Transport Width	2.99 m (9′ 8″)
Transport Height	3.69 m (12′ 1″)
Weight	4070 kg (8972 lbs)
Bale Sizes	From 80 x 60 cm (2′ 8″ x 2′) to 120 x 160 cm (4′ x 5′ 3″) including double bales: 120 x 70cm (4′ x 2′ 4″) Max bale length 2 m (6′ 7″)*
Wrapping speed (up to)	25
Film roll capacity	12 (10 in storage and 2 in dispensers)
Roll Loading Step	Standard
External Dispenser Index Button	Standard
Tyres	400/70-20
Axle	6 Stud Braked
Brakes	Hydraulic Brakes (Air brakes – optional)
Attachment to Tractor	Cat II/III lower linkage SAE 6 spline PTO shaft
PTO Speed	500-800 RPM
Hydraulic Requirement	Continuous – Independent Load Sensing Pump Driven off PTO
Hydraulic Connection	3 x Male ½” Quick Release (1xS.A. 1xD.A.)
Control Console	Expert Control Console
Wired Handpiece Control	Standard
Radio Remote Control Kit	Optional
Static Wrapping Table	Optional
Air Brakes	Optional

Source: McHale 998 page.

Bale wrapper

McHale 998 High Speed

High speed square bale wrapper

40rpm max. wrap speed

12film rolls

8979lbs.

Laser sensors allow dispenser speeds up to about 40rpm
Adjustable maximum speed setting
In-cab control of bale size and film layer
Continuous load, wrap and drop cycle
2 x 750mm dispensers

Full specifications

Transport Length	7.3 m (24′)
Transport Width	2.99 m (9′ 8″)
Transport Height	3.69 m (12′ 1″)
Weight	4073 kg (8979 lbs)
Bale Sizes	From 80 x 60 cm (2′ 8″ x 2′) to 120 x 160 cm (4′ x 5′ 3″) including double bales: 120 x 70cm (4′ x 2′ 4″) Max bale length 2 m (6′ 7″)*
Wrapping speed (up to)	40 rpm
Film roll capacity	12 (10 in storage and 2 in dispensers)
High Speed Sensors	Standard
Roll Loading Step	Standard
External Dispenser Index Button	Standard
Tyres	400/70-20
Axle	6 Stud Braked
Brakes	Hydraulic Brakes (Air brakes – optional)
Attachment to Tractor	Cat II/III lower linkage SAE 6 spline PTO shaft
PTO Speed	500-800 RPM
Hydraulic Requirement	Continuous – Independent Load Sensing Pump Driven off PTO
Hydraulic Connection	3 x Male ½” Quick Release (1xS.A. 1xD.A.)
Control Console	Expert Control Console
Wired Handpiece Control	Standard
Radio Remote Control Kit	Optional
Static Wrapping Table	Optional
Air Brakes	Optional

Source: McHale 998 High Speed page.

Bale wrapper

McHale 995 TSR

Square and round bale wrapper

2000 lbsmax. bale weight

30 rotations/mintable speed

2200lbs.

Wraps round or square bales
Radio remote control for one-man operation
Hydraulic cut and hold
Quick fit 750mm dispensers
Runs from a tractor or power pack

Full specifications

Total Length	3.1 m / 10’2”
Transport Width	1.73 m / 5’8”
Height to top of rollers	0.97 m / 3’2”
Weight	1100 kg / 2200 lbs
Max bale weight	1000kg / 2000 lbs
Min oil req. litres per minute	18 l/min @ 150 bar
Electrical Requirement	12v from Battery or EuroPlug
Wrapping speed (up to)	30 rotations/min
Film Holders	2
Protection Mechanism	Shear Bolt/ Roll Pin
Dispenser	750/ 500mm @ 70% (55% optional)
Cut & Tie	Standard
Attachment to Tractor	Towbar
Control	Expert Plus Radio Remote Control
Round bales Max. Width	150 cm / 5’
Round bales Max. Diameter	150 cm / 5’
Square Bales Sizes	70 cm x 70 cm (2’ 3” x 2’ 3”) 80 cm x 80 cm (2’ 7” x 2’ 7”) 80 cm x 90 cm (2’ 7” x 2’ 11”)
Max. Bale Length	180 cm / 5’10”

Source: McHale 995 TSR page.

Bale handling

McHale 691

Round bale handler with rotating rollers

2425 lbslifting capacity

352 lbsweight

Carries one silage bale or spikes two bales of hay or straw
Rollers have tine reinforcement
Rollers remove to make a spike handler
Check valve and pipes standard

Full specifications

Weight	160 kg / 352 lbs
Height	0.65 m / 2’0”
Length (overall)	1.42 m / 4’7”
Length of Arms	1.19 m / 4’0”
Max width (fully open)	1.63 m / 5’4”
Open Distance between the Arms	1.37 m / 4’5” (Open)
Closed Distance between the Arms	0.73 m / 2’4 (Closed)
Lifting Capacity	1100 kg / 2425 lbs
Hydraulic Requirements	One Double Acting Service
Check Valve & Pipes	Standard
Minimum Hydraulic Pressure	150 bar/ 2250 Ibs/sq.in

Source: McHale 691 page.

Bale handling

McHale R5

Round bale handler for bales on their ends

2425 lbslifting capacity

352 lbsweight

Collects bales tipped on their ends
Turns bales 90 degrees to stack on end
Check valve ram keeps a firm grip
Bale hands cradle wrapped bales

Full specifications

Weight	160 kg / 352 lbs
Height	0.59 m / 2’0”
Length (overall)	1.42 m / 4’7”
Length of Arms	1.2 m / 3’11”
Max Width (Fully Open)	1.75 m / 5’9”
Open Distance between the Arms	1.65 m / 5’5”
Closed Distance between the Arms	0.67 m / 2’3” (Closed)
Lifting Capacity	1100 kg / 2425 lbs
Hydraulic Requirements	One Double Acting Service
Check Valve & Pipes	Standard
Minimum Hydraulic Pressure	150 bar / 2250 lbs/sq. in

Source: McHale R5 page.

Bale handling

McHale 994

Round bale splitter

2425 lbslifting capacity

507 lbsweight

One double acting cylinder and a specially designed knife
Carries bales from the stack to the feed area
Pushes split bale segments into the feeding area
Three-point linkage, loader or handler mount

Full specifications

Weight	230 kg / 507 lbs
Length (Overall)	2.05 m / 6’8”
Width	1.25 m / 4’2”
Height Open	2.20 m / 7’3 ”
Height Closed	1 m / 3’3”
Lifting Capacity	1100 kg / 2425 lbs
Hydraulic Requirements	One Double Acting Service
Minimum Hydraulic Pressure	150 bar/ 2250 Ibs/sq.in

Source: McHale 994 page.

Bale handling

McHale C430

Linkage silage feeder and straw blower

1 x 1.2m (47”)bale capacity

18 metersdischarge

120 hpmin. power

Short, compact body for narrow passages
Carries one 4ft round bale
300° 3 stage feed chute
Joystick chute control
Twin speed gearbox for different crops

Full specifications

Weight	1,800 Kg (3968 lbs))
Length (Door Open)	4m (157″)
Length (Door Closed)	2.64m (104″)
Width	2.03m (80″)
Body Height	2.13m (84″)
Bale Chamber (W x H xL)	1.4m x 1.22m x 1.17m 56” x 48” x 46”
Bale Capacity	1 x 1.2m (47”) diameter bales
Conveyor Drive	Hydraulic
No. of Conveyor Slats	7
No. of Disks on Rotor	7
No. of Knifes	56
Rotor Drive Type	High Torque Belt Drive
Gearbox	Twin Speed
PTO	540 with slip & overrun protection
Min. tractor power	90 kW (120 hp)
Tractor Hydraulics	1 x feed 1 x return
Minimum Oil Flow Requirement	35 l/min @ 160 bar (2,320 psi)
Tractor Mounting	3 Point Linkage
Tyres	N/A
Control	Expert control console with joystick chute control
Chute Rotation	300 degrees
Chute Composition	3 stage
Max. Discharge Distance	18 meters

Source: McHale C430 page.

Bale handling

McHale C460

Trailed silage feeder and straw blower

2 x 1.2m (47”)bale capacity

18 metersdischarge

68 hpmin. power

Carries two 4ft round bales
Beds sheds with straw and feeds hay, haylage or silage
300° 3 stage feed chute
Joystick chute control
Independent rotor drive with hydraulic activation

Full specifications

Weight	2,200 Kg (4894 lbs)
Length (Door Open)	5.75m (226″)
Length (Door Closed)	4.42m (174″)
Width	2.22m (87″)
Body Height	2.6m (102″)
Bale Chamber (W x H x L)	1.8m x 1.22m x 1.66m 71” x 48” x 65”
Bale Capacity	2 x 1.2m (47”) diameter bales
Conveyor Drive	Hydraulic
No. of Conveyor Slats	10
No. of Disks on Rotor	7
No. of Knifes	56
Rotor Drive Type	High Torque Belt Drive
Gearbox	Twin Speed
PTO	540 with slip & overrun protection
Min. tractor power	51 kW (68 hp)
Tractor Hydraulics	1 x feed 1 x return
Minimum Oil Flow Requirement	35 l/min @ 160 bar (2,320 psi)
Tractor Mounting	Drawbar or 2 Point Linkage
Tyres	10.0/75 – 15.3
Tyres Optional	340/55-16
Control	Expert control console with joystick chute control
Chute Rotation	300 degrees
Chute Composition	3 stage
Max. Discharge Distance	18 meters

Source: McHale C460 page.

Bale handling

McHale C470

Higher capacity trailed feeder and straw blower

2 x 1.5m (59”)bale capacity

18 metersdischarge

68 hpmin. power

Extra capacity for bedding or feeding away from the main farm
Optional linkage drawbar for tight sheds
300° 3 stage feed chute
Joystick chute control
Twin speed gearbox

Full specifications

Weight	2,450 Kg (5401 lbs)
Length (Door Open)	6.25m (246″)
Length (Door Closed)	4.92m (194″)
Width	2.22m (87″)
Body Height	2.6m (102″)
Bale Chamber (W x H x L)	1.8m x 1.22m x 2.16m 71” x 48” x 85”
Bale Capacity	2 x 1.5m (59”) diameter bales
Conveyor Drive	Hydraulic
No. of Conveyor Slats	13
No. of Disks on Rotor	7
No. of Knifes	56
Rotor Drive Type	High Torque Belt Drive
Gearbox	Twin Speed
PTO	540 with slip & overrun protection
Min. tractor power	51 kW (68 hp)
Tractor Hydraulics	1 x feed 1 x return
Minimum Oil Flow Requirement	35 l/min @ 160 bar (2,320 psi)
Tractor Mounting	Drawbar or 2 Point Linkage
Tyres	10.0/75 – 15.3
Tyres Optional	340/55-16
Control	Expert control console with joystick chute control
Chute Rotation	300 degrees
Chute Composition	3 stage
Max. Discharge Distance	18 meters

Source: McHale C470 page.

Bale handling

McHale C490

Trailed feeder and straw blower for three 5 ft bales

3 x 1.5m (59”)bale capacity

18 metersdischarge

68 hpmin. power

Extra capacity for bedding or feeding away from the main farm
Optional linkage drawbar for tight sheds
300° 3 stage feed chute
Joystick chute control
Handles square bales and clamp silage too

Full specifications

Weight	2,899 Kg (6391 lbs)
Length (Door Open)	7.29m (287″)
Length (Door Closed)	5.96m (235″)
Width	2.24m (88″)
Body Height	2.6m (102″)
Bale Chamber (W x H x L)	1.8m x 1.22m x 3.226m 71” x 48” x 127”
Bale Capacity	3 x 1.5m (59”) diameter bales
Conveyor Drive	Hydraulic
No. of Conveyor Slats	17
No. of Disks on Rotor	7
No. of Knifes	56
Rotor Drive Type	High Torque Belt Drive
Gearbox	Twin Speed
PTO	540 with slip & overrun protection
Min. tractor power	51 kW (68 hp)
Tractor Hydraulics	1 x feed 1 x return
Minimum Oil Flow Requirement	35 l/min @ 160 bar (2,320 psi)
Tractor Mounting	Drawbar or 2 Point Linkage
Tyres	340/55-16
Tyres Optional	N/A
Control	Expert control console with joystick chute control
Chute Rotation	300 degrees
Chute Composition	3 stage
Max. Discharge Distance	18 meters

Source: McHale C490 page.

Hay tool

McHale Pro Glide R3100-II

Rear conditioner mower

122”cutting width

7discs

108hpmin. power

2,756lbs.

Hydraulic cutterbar ground pressure control
X-Edge cutterbar
Mechanical break back protection
Steel tine conditioner
CoreCut protection and quick-fit blades

Full specifications

Transport Width	1.7m (67′)
Transport Length	2.2m (87″)
Transport Height	3.6m (142″)
Weight	1,250 kgs (2,756 lbs)
Cutting Width	3.1 m (122”)
Swath Width	1.3m – 2.3m (51″-91″)
Number of Cutting Discs	7
Total Number of Blades	14 (2 Blades per Disc)
Cutting Height	25mm – 75mm
Cutting Disc Speed	3,200 rpm
Cutting Blade	Quick Change
Conditioner Type	Steel Tine Conditioner
Conditioner Speed	925 rpm
Min. tractor power	80 kW / 108HP
Linkage Attachment	CAT II or CAT III (Rear) 3-Point Linkage
PTO Speed	1,000 rpm
Lighting	LED Lighting: 12 V/7-pin socket
Hydraulic Systems	Double Acting Hydraulic Supply with Float (Minimum) & Single Acting Hydraulic Supply (Optional)
Minimum Pressure	180 bar (2,3610 psi)
Minimum Hydraulic Flow Rate	20 l/min (4.54 gal/min) @ 180 bar (2,610 psi)
Capacity	3.5 ha/h (8.5 acres/hour)

Source: McHale Pro Glide R3100-II page.

Hay tool

McHale Pro Glide F3100-II

Front conditioner mower

122”cutting width

7discs

108hpmin. power

2,756lbs.

Tubular frame with integrated suspension
Patented constant ground pressure
500mm up and down adaptive range
X-Edge cutterbar
Steel tine conditioner

Full specifications

Transport Width	2.96m (116′)
Transport Length	1.98m (78″)
Transport Height	1.45m (57″)
Weight	1,250 kgs (2,756 lbs)
Cutting Width	3.1 m (122”)
Swath Width	1.3m – 2.3m (51″-91″)
Number of Cutting Discs	7
Total Number of Blades	14 (2 Blades per Disc)
Cutting Height	25mm – 75mm
Cutting Disc Speed	3,200 rpm
Cutting Blade	Quick Change
Conditioner Type	Steel Tine Conditioner
Conditioner Speed	925 rpm
Min. tractor power	80 kW / 108HP
Linkage Attachment	CAT II or CAT III (Front) 3-Point Linkage
PTO Speed	1,000 rpm
Lighting	LED Lighting: 12 V/7-pin socket
Hydraulic Systems	Single Acting Hydraulic Supply with Float
Minimum Pressure	180 bar (2,3610 psi)
Minimum Hydraulic Flow Rate	20 l/min (4.54 gal/min) @ 180 bar (2,610 psi)
Capacity	3.5 ha/h (8.5 acres/hour)

Source: McHale Pro Glide F3100-II page.

Hay tool

McHale Pro Glide R310

Rear non-conditioner mower

118”cutting width

7discs

108 hpmin. power

2,238lbs.

Patented 3D ground tracking
Mechanical break back protection
Heavy-duty, fully welded cutter bar
1,000 or 540rpm driveline
Adjustable swathing discs optional

Full specifications

Transport Width	1.9 m (75”)
Transport Length	1.5 m (59”)
Transport Height	3.7 m (146”)
Weight	1,015 Kg (2,238 lbs)
Cutting Width	3 m (118”)
Swath Width	1.6 m – 2.3m (63”-91”)
Number of Cutting Discs	7
Total Number of Blades	14 (2 Blades per Disc)
Cutting Height	25 mm – 75 mm (1” – 3”)
Cutting Disc Speed	3,200 rpm
Cutting Blade	Quick Change (Double Sided)
Adjustable Swathing Discs	Optional
Min. tractor power	80 kW / 108 HP
Linkage Attachment	CAT II or CAT III (Rear) 3-Point linkage
PTO Speed (Interchangable Gearbox)	540/ 1,000 rpm
Rear Lighting Kit (Optional)	LED Lighting: 12 V / 7- pin socket
Hydraulic Systems	Double Acting Hydraulic Supply with Float (Minimum)
Minimum Pressure	180 bar (2,610psi)
Minimum Hydraulic Flow Rate	20 l/min (4.54 gal/min) @ 180 bar (2,610 psi)
Capacity	3.5 ha/h (8.5 acres/hour)

Source: McHale Pro Glide R310 page.

Hay tool

McHale Pro Glide B9000

Combination mower with 3m cutter bars

321″–345″cutting width with front mower

14discs

200hpmin. power with front mower

Up to 8.75m cutting width with an F3100 front mower
Steel tine conditioners
Patented constant ground pressure
Hydraulic width adjustment
Vertical transport and parking

Full specifications

Transport Width	2.98m (117″)
Transport Length	2.2m (87″)
Transport Height	4m (158″)
Weight	2,760kg (6085lbs)
Cutting Width	8.15m–8.75m (321″–345″) including Front Mower
Swath Width	1.3m – 2.3m (51″-91″
Number of Cutting Discs	14 (7×2)
Total Number of Blades	28 (2 blades per disc)
Cutting Height	25mm – 75mm (1″–3″)
Cutting Disc Speed	3,200 rpm
Cutting Blade	Quick Change
Hydraulic Width Adjustment	Optional
Counter Balance Weights	Not Applicable
Conditioner Type	Steel Tine Conditioner
Conditioner Speed	700 / 1000 rpm
Min. tractor power	150kW / 200HP (including Front Mower)
Linkage Attachment	CAT II or CAT III (Rear) 3-Point Linkage
PTO Speed	1,000 rpm
Lighting	LED Lighting: 12 V/7-pin socket
Hydraulic Systems	3 Double Acting Hydraulic Supply with Float ( Minimum ) & Single Acting Hydraulic Supply ( Optional )
Minimum Pressure	180 bar (2,610 psi)
Minimum Hydraulic Flow Rate	40 l/min (8.79 gal/min) @ 180 bar (2,610 psi)
Capacity	9.5 ha/h (23.5 acres/hour)

Source: McHale Pro Glide B9000 page.

Hay tool

McHale Pro Glide B9600

Combination mower with 3.4m cutter bars

358″–378″cutting width with front mower

16discs

250hpmin. power with front mower

Up to 9.6m cutting width with an F3100 front mower
Steel tine conditioners
Patented constant ground pressure
Hydraulic width adjustment
3D ground contour tracking

Full specifications

Transport Width	2.98m (117″)
Transport Length	2.2m (87″)
Transport Height	4m (158″)
Weight	3,350kg (7385lbs)
Cutting Width	9.1m–9.6m (358″–378″) including Front Mower
Swath Width	1.3m – 2.7m (51″-106″)
Number of Cutting Discs	16 (8×2)
Total Number of Blades	32 (2 blades per disc)
Cutting Height	25mm – 75mm (1″–3″)
Cutting Disc Speed	3,200 rpm
Cutting Blade	Quick Change
Hydraulic Width Adjustment	Optional
Counter Balance Weights	Not Applicable
Conditioner Type	Steel Tine Conditioner
Conditioner Speed	700 / 1000 rpm
Min. tractor power	185kW / 250HP (including Front Mower)
Linkage Attachment	CAT III or CAT IV (Rear) 3-Point Linkage
PTO Speed	1,000 rpm
Lighting	LED Lighting: 12 V/7-pin socket
Hydraulic Systems	3 Double Acting Hydraulic Supply with Float ( Minimum ) & Single Acting Hydraulic Supply ( Optional )
Minimum Pressure	180 bar (2,610 psi)
Minimum Hydraulic Flow Rate	40 l/min (8.79 gal/min) @ 180 bar (2,610 psi)
Capacity	10.5 ha/h (26 acres/hour)

Source: McHale Pro Glide B9600 page.

Hay tool

McHale Pro Glide B910

Non-conditioner butterfly mower

359″cutting width

16discs

150 hpmin. power

Patented 3D ground tracking
Unique stone protection
Mechanical break back protection
Heavy-duty 1,000 RPM driveline
Adjustable swathing discs optional

Full specifications

Transport Width	2.98m (117″)
Transport Length	1.58m (62″)
Transport Height	4m (158″)
Weight	2,100kg (4,630bs)
Cutting Width	9.1m (359″)
Swath Width	1.7 m – 2.7m (67”-107”)
Number of Cutting Discs	16
Total Number of Blades	32 (2 Blades per Disc)
Cutting Height	25 mm – 75 mm (1” – 3”)
Cutting Disc Speed	3,200 rpm
Cutting Blade	Quick Change (Double Sided)
Adjustable Swathing Discs	Optional
Min. tractor power	112 kW / 150 HP
Linkage Attachment	CAT II or CAT III (Rear) 3-Point linkage
PTO Speed (Interchangable Gearbox)	1,000 RPM
Rear Lighting Kit (Optional)	LED Lighting: 12 V / 7- pin socket
Hydraulic Systems	2X Double Acting Hydraulic Supply with Float (Minimum)
Minimum Pressure	180 bar (2,610psi)
Minimum Hydraulic Flow Rate	40 l/min (8.79 gal/min) @ 180 bar (2,610 psi)
Capacity	9.5 ha/h (23.5 acres/hour)

Source: McHale Pro Glide B910 page.

Hay tool

McHale ProPel M6-770

Mounted 6-rotor tedder

25’3″working width

6rotors

60 hpmin. power

2,800lbs.

6 rotors, 7 double-hooked tines per rotor
Mounted on CAT II linkage
Headland management system optional
Spare rotor wheel optional

Full specifications

Transport Length	2.55 m (8′ 4″)
Transport Width	2.9 m (9′ 6″)
Transport Height	3.7 m (12′ 2″)
Weight	1,270 kg (2,800 lbs)
Min. tractor power	45 kW (60 HP)
Attachment	Mounted/ CAT II linkage
Recommended PTO Speed	480 rpm (SAE 6 spline PTO shaft)
Lighting	12 V / 7-pin socket
Hydraulic Systems	2x DA hydraulic supply
Minimum Flow Rate	20 l/min (4.54 gal/min) @ 180 bar (2,610 psi)
Number of Rotors	6
Rotor Diameter (including tines)	1.58 m (5′ 2″)
Working Width	7.7 m (25’3″)
Number of Tine Arms	7 (per rotor)
Chassis Tyres (380/55-17)	N/A
Rotor Tyres (170/60-8)	6 (1 per rotor)
Spare Rotor Wheel	Optional
Headland Management System	Optional

Source: McHale ProPel M6-770 page.

Hay tool

McHale ProPel T8-1020

Trailed 8-rotor tedder

33’6″working width

8rotors

60 hpmin. power

5,743lbs.

8 rotors on a long carriage frame
Unfolds, lifts and lowers with two double acting spools
Wide transport tires ahead of the rotors
Headland management system optional

Full specifications

Transport Length	5.8 m (19′)
Transport Width	2.99 m (9′ 10″)
Transport Height	2.6 m (8′ 6″)
Weight	2,605 kg (5,743 lbs)
Min. tractor power	45 kW (60 HP)
Attachment	Trailed/ CAT II lower linkage
Recommended PTO Speed	480 rpm (SAE 6 spline PTO shaft)
Lighting	12 V / 7-pin socket
Hydraulic Systems	1x SA, 2x DA hydraulic supply (1 with float)
Minimum Flow Rate	20 l/min (4.54 gal/min) @ 180 bar (2,610 psi)
Number of Rotors	8
Rotor Diameter (including tines)	1.58 m (5′ 2″)
Working Width	10.2 m (33’6″)
Number of Tine Arms	7 (per rotor)
Chassis Tyres (380/55-17)	2
Rotor Tyres (170/60-8)	8 (1 per rotor)
Spare Rotor Wheel	Optional
Headland Management System	Optional

Source: McHale ProPel T8-1020 page.

Hay tool

McHale ProPel T10-1260

Trailed 10-rotor tedder

41’4″working width

10rotors

67 hpmin. power

6,625lbs.

Largest tedder in the range
10 rotors on a carriage frame
2-point linkage pivoting headstock
Rotors float on wide transport tyres

Full specifications

Transport Length	5.8 m (19′)
Transport Width	2.99 m (9′ 10″)
Transport Height	2.6 m (8′ 6″)
Weight	3,005 kg (6,625 lbs)
Min. tractor power	50 kW (67 HP)
Attachment	Trailed/ CAT II lower linkage
Recommended PTO Speed	580 rpm (SAE 6 spline PTO shaft)
Lighting	12 V / 7-pin socket
Hydraulic Systems	1x SA, 2x DA hydraulic supply (1 with float)
Minimum Flow Rate	20 l/min (4.54 gal/min) @ 180 bar (2,610 psi)
Number of Rotors	10
Rotor Diameter (including tines)	1.58 m (5′ 2″)
Working Width	12.6 m (41’4″)
Number of Tine Arms	7 (per rotor)
Chassis Tyres (380/55-17)	2
Rotor Tyres (170/60-8)	10 (1 per rotor)
Spare Rotor Wheel	Optional
Headland Management System	Optional

Source: McHale ProPel T10-1260 page.

Hay tool

McHale R62-72

Compact centre delivery rake

20’ 4” – 23’ 7”working width

11tine arms per rotor

4167lbs.

In-cab width adjustment
11 tine arms per rotor
Steering axle
Pivoting headstock
Transport height under 4m

Full specifications

3 Metre Swath Gathering	2 Swaths*
Mounting Type	2 Point Linkage
Mounting Category	Cat I & Cat II
Incab Adjustable Working Width (m/ ft)	6.2m – 7.2m (20’ 4” – 23’ 7”)
Number of Rotors & Rotor Wheels	2 rotors / 4 wheels per rotor
Rotor Diameter (m/ ft)	2.9 m ( 9’ 6”)
Number of Arms	11
Number of Tines Per Arm	4
Tine Diameter (mm)	10mm / 3 Coil
PTO Shaft Speed (rpm)	540 RPM
PTO Driveline	Y Gearbox
Hydraulic Requirements	1 x Single Acting &1 x Double Acting
Main Greasing	Grease Nipples
Axle & Wheels	6 stud – 380/55/17
Transport Width	2.84 m (9’ 4”)
Transport Height	3.75 m (12’ 4”)
Length	6.05 m (19’ 8”)
Weight	1890 kg (4167 lbs)

Source: McHale R62-72 page.

Hay tool

McHale R68-78

High output centre delivery rake

22’ 4” – 25’ 7”working width

13tine arms per rotor

4630lbs.

Gathers three 3m swaths into one
In-cab width adjustment
13 tine arms per rotor
Steering axle
Pivoting headstock

Full specifications

3 Metre Swath Gathering	3 Swaths
Mounting Type	2 Point Linkage
Mounting Category	Cat I & Cat II
Incab Adjustable Working Width (m/ ft)	6.8m – 7.8m (22’ 4” – 25’ 7”)
Number of Rotors & Rotor Wheels	2 rotors / 6 wheels per rotor
Rotor Diameter (m/ ft)	3.2 m ( 10’ 6”)
Number of Arms	13
Number of Tines Per Arm	4
Tine Diameter (mm)	10mm / 3 Coil
PTO Shaft Speed (rpm)	540 RPM
PTO Driveline	Y Gearbox
Hydraulic Requirements	1 x Single Acting &1 x Double Acting
Main Greasing	Grease Nipples
Axle & Wheels	6 stud – 380/55/17
Transport Width	2.84 m (9’ 4”)
Transport Height	3.99 m (13’ 1”)
Length	6.05 m (19’ 8”)
Weight	2100 kg (4630 lbs)

Source: McHale R68-78 page.

Hay tool

McHale R80-90

Largest centre delivery rake

26’ 3” – 29’ 6”working width

13tine arms per rotor

5805lbs.

Gathers four 3m swaths into one
3.8m rotors on a 6-wheel bogie
13 tine arms per rotor
In-cab width adjustment
Steering axle

Full specifications

3 Metre Swath Gathering	4 Swaths
Mounting Type	2 Point Linkage
Mounting Category	Cat II
Incab Adjustable Working Width (m/ ft)	8m – 9m (26’ 3” – 29’ 6”)
Number of Rotors & Rotor Wheels	2 rotors / 6 wheels per rotor
Rotor Diameter (m/ ft)	3.8 m ( 12’ 5”)
Number of Arms	13
Number of Tines Per Arm	4
Tine Diameter (mm)	10mm / 3 Coil
PTO Shaft Speed (rpm)	540 RPM
PTO Driveline	Y Gearbox
Hydraulic Requirements	1 x Single Acting & 1 x Double Acting
Main Greasing	Grease Nipples
Axle & Wheels	6 stud – 380/55/17
Transport Width	3 m (9’ 10”)
Transport Height	3.65 m (12’)
Length	6.05 m (19’ 8”)
Weight	2635 kg (5805 lbs)

Source: McHale R80-90 page.

Round balers at a glance

Model	F5-540	F5-550	F5-560	F5-560 Plus	V6740-II	V6750-II	V6760-II	V8940-II	V8950-II	V8960-II
Bale diameter	1.25 m (4’1”)	1.25 m (4’1”)	1.25 m (4’1”)	1.25 m (4’1”)	0.6 m (2’) to 1.68 m (5’ 6”)	0.6 m (2’) to 1.68 m (5’ 6”)	0.6–1.68m (2'–5'6")	0.6 m (2’) to 1.9 m	0.6 m (2’) to 1.9 m (6’ 3”)	0.6–1.9m (2'–6'3")
Bale width	1.23 m (4′)	1.23 m (4′)	1.23 m (4′)	1.23 m (4′)	1.23m (4’)	1.23m (4’)	1.23m (4')	1.23 m	1.23 m (4’)	1.23m (4')
Number of Knives	0	15	25	25	0	15	15	0	15	15
Control System	Wizard Control Console	iControl 5 or ISOBUS/ ISO-Play (Optional)	ISOBUS/ ISO-Play	ISOBUS/ ISO-Play	Expert Plus	ISOBUS/ISOPlay	ISOBUS	Expert Plus	Expert Plus	ISOBUS
Operation	Semi Automatic	Semi Automatic	Fully Automatic	Fully Automatic	Semi Automatic	Semi Automatic	Fully Automatic	Semi Automatic	Semi-Automatic	Fully Automatic
Weight	3260 kg (7,187 lbs)	3500 kg (7,716 lbs)	3700 kg (8,157 lbs)	3850 kg (8,488 lbs)	4430kg (9,766 lbs)*	4540kg (10,009 lbs)*	4,580kg* (10,097 lbs)	4740kg (10,450 lbs)*	4850kg (10,692 lbs)*	4,890kg* (10,780 lbs)
Min. tractor power	60kW (80hp)	67kW (90hp)	75kW (100hp)	75kW (100hp)	55 kW (73hp)	60 kW (80hp)	60 kW (80hp)	55 kW (73hp)	60 kW (80hp)	60 kW (80hp)

Integrated baler wrappers at a glance

Model	Fusion 4	Fusion 4 Plus	Fusion 4 Pro	Fusion Vario Plus
Bale diameter	1.25 m (4’1”)	1.25 m (4’1”)	1.25 m (4’1”)	0.6 – 1.68m (2’–5’6″)
Bale width	1.23 m (4′)	1.23 m (4′)	1.23 m (4′)	1.23 m (4′)
Control System	Expert Plus	ISOBUS (Optional ISO-PLAY)	ISOBUS (Optional ISO-PLAY)	ISOBUS
Operation	Fully Automatic Electronic	Fully Automatic Electronic	Fully Automatic Electronic	Fully Automatic
Weight	5800 kgs (12,787 lbs)	5950 kgs (13,117 lbs)	5850 kgs (12,897 lbs)	6500kg* (14,330 lbs)
Min. tractor power	85kW (115hp)	85kW (115hp)	85kW (115hp)	85kW (114hp)

Bale wrappers at a glance

Model	991 High Speed	Orbital	991 BE	991 BJS	991 BC	991 TBER	991 LBER	991 LB	998	998 High Speed	995 TSR
Bale Size	1.52 m (3’3″-5′)	1.48 m (4’9″)	1.52 m (3’3″-5′)	1- 1.52 m (3’3″-5′)	1.52 m (3’3″-5′)	1.52 m (3’3″-5′)	1.52 m (3’3″-5′)	1.52 m (3’3″-5′)	–	–	–
Wrapping speed (up to)	30 rotations/min	40 rotations/min	30 rotations/min	30 rotations/min	30 rotations/min	30 rotations/min	30 rotations/min	30 rotations/min	25	40 rpm	30 rotations/min
Aluminum Dispensers	2 x 750 mm	2 x 750 mm	1 x 750 mm Optional 500 mm Kit	1 x 750 mm Optional 500 mm Kit	–	1 x 750 mm Optional 500 mm Kit	1 x 750 mm Optional 500 mm Kit	1 x 750 mm Optional 500 mm Kit	–	–	–
Film roll capacity	X 8 (2+6)	X 8 (2+6)	X 7 (1+6)	X 7 (1+6)	X 7 (1+6)	X 3 (1+2)	X 3 (1+2)	x 3 (1+2)	12 (10 in storage and 2 in dispensers)	12 (10 in storage and 2 in dispensers)	–
Driver Control	Expert Control Console	Expert Plus Control Console	Expert Control Console	Single lever joy stick (with Wizard Control)	4 Lever Cable Control (with Wizard Control)	Expert Control Console	Expert Control Console	3 Lever Cable Control (with Wizard Control)	–	–	–
Weight	1900 kg (4189 lbs)	2400 kg (5391 lbs)	1870 kg (4123 lbs)	1870 kg (4123 lbs)	1870 kg (4123 lbs)	1,090 kg (2403 lbs)	800 kg (1764 lbs)	800 kg (1764 lbs)	4070 kg (8972 lbs)	4073 kg (8979 lbs)	1100 kg / 2200 lbs
Min. tractor power	35 kW / 47 hp	45 kW / 60 hp	35 kW / 47 hp	35 kW / 47 hp	35 kW / 47 hp	35 kW / 47 hp	45 kW / 60 hp	45 kW / 60 hp	–	–	–

Bale handlers and feeders at a glance

Model	691	R5	994	C430	C460	C470	C490
Weight	160 kg / 352 lbs	160 kg / 352 lbs	230 kg / 507 lbs	1,800 Kg (3968 lbs))	2,200 Kg (4894 lbs)	2,450 Kg (5401 lbs)	2,899 Kg (6391 lbs)
Lifting Capacity	1100 kg / 2425 lbs	1100 kg / 2425 lbs	1100 kg / 2425 lbs	–	–	–	–
Bale Capacity	–	–	–	1 x 1.2m (47”) diameter bales	2 x 1.2m (47”) diameter bales	2 x 1.5m (59”) diameter bales	3 x 1.5m (59”) diameter bales
Max. Discharge Distance	–	–	–	18 meters	18 meters	18 meters	18 meters
Min. tractor power	–	–	–	90 kW (120 hp)	51 kW (68 hp)	51 kW (68 hp)	51 kW (68 hp)

McHale parts and manuals

McHale posts its spare parts books and operator's manuals online, so the right part can be identified by machine. It also offers machine setup videos and ISOBUS and ISO-PLAY help videos. Bring your model and serial number and the Clinton Tractor parts counter orders genuine McHale parts.

Pick-up tines
Cam bearings
Chopper knives
Endless belts
Bale chamber bearings
Bale chamber chain
Film dispensers
Net and film rolls
Shear bolts
Mower blades
Tedder tines
Rake tines

Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

Built into McHale balers and wrappers

01Profi-Flo pick-up
Tine bands and feed augers sit close to the rotor, so crop flows in evenly from the outer edges of the 2.1 m pick-up. Camless versions carry two extra columns of tines.
02Drop floor unblocking
If a blockage occurs, the operator lowers the floor hydraulically from the cab, re-engages the PTO to feed the lump through, then resets the floor and keeps baling.
03Vertical wrapping ring
On Fusion machines two 750 mm dispensers apply 4 layers of film in about 18 seconds, so the wrapping platform is ready for the next bale.
04Ground supported damper
On the 991 B and 991 High Speed trailed wrappers the patented damper lowers each wrapped bale gently to the ground without stressing the chassis.

Built and tested in-house

McHale builds its machines in its own factories in Ireland and Hungary, and runs, calibrates and tests every machine before it ships.

How McHale builds and tests

Today McHale operate two advanced manufacturing facilities. Both factories utilise the latest in laser, CNC and robotic technologies. All products are coated using advanced E-Coat & Powder systems.

As the product is built on the assembly lines, rigorous quality checks are conducted. Every complete machine is run, calibrated, and tested before being exported to one of over 55 countries around the world.

Three-year test cycle

New McHale machines go through a 3-year development and testing cycle, including testing with end users, before launch.

Research and development

All machines go through a rigorous 3-year product development & testing cycle before being launched. During the design and development stage all machines go through comprehensive testing with end users in various parts of the world.

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday

Get directions (315) 853-6151

Driving distance

New Hartford 6 mi
Utica 9 mi
Rome 14 mi
Oneida 17 mi
Hamilton 20 mi
Herkimer 26 mi
Cazenovia 31 mi
Norwich 42 mi
Cooperstown 47 mi
Syracuse 49 mi
Oneonta 60 mi
Cortland 61 mi

Before you visit

Can I see McHale machines in person?

Call (315) 853-6151 before you drive over and ask which McHale machines we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.

McHale Baler Dealer in Central New York

Round balers

Integrated baler wrappers

Bale wrappers

Bale handlers and feeders

Mowers, tedders and rakes

McHale history

Compare McHale machines

McHale F5-540

McHale F5-550

McHale F5-560

McHale F5-560 Plus

McHale V6740-II

McHale V6750-II

McHale V6760-II

McHale V8940-II

McHale V8950-II

McHale V8960-II

McHale Fusion 4

McHale Fusion 4 Plus

McHale Fusion 4 Pro

McHale Fusion Vario Plus

McHale 991 High Speed

McHale Orbital

McHale 991 BE

McHale 991 BJS

McHale 991 BC

McHale 991 TBER

McHale 991 LBER

McHale 991 LB

McHale 998

McHale 998 High Speed

McHale 995 TSR

McHale 691

McHale R5

McHale 994

McHale C430

McHale C460

McHale C470

McHale C490

McHale Pro Glide R3100-II

McHale Pro Glide F3100-II

McHale Pro Glide R310

McHale Pro Glide B9000

McHale Pro Glide B9600

McHale Pro Glide B910

McHale ProPel M6-770

McHale ProPel T8-1020

McHale ProPel T10-1260

McHale R62-72

McHale R68-78

McHale R80-90

Round balers at a glance

Integrated baler wrappers at a glance

Bale wrappers at a glance

Bale handlers and feeders at a glance

McHale parts and manuals

Service department

Built into McHale balers and wrappers

01Profi-Flo pick-up

02Drop floor unblocking

03Vertical wrapping ring

04Ground supported damper

Built and tested in-house

Three-year test cycle

Find us in Clinton

Driving distance

Before you visit