HLA Attachments Dealer in Central New York

Showing all 47 models

HLA bucket

HLA Standard Front End Loader Bucket, Regular Duty

A regular duty tractor loader bucket in ten widths, from 48 to 108 in.

48-108in. inside width

13.9-32.3cu. ft. SAE heaped

385-675lbs.

• Reinforced top lip
• Flat top acts as level indicator
• Drilled for standard bolt on cutting edge
• Tapered end plates are self-cleaning and reduces material build-up

Full specifications

Part numbers	MB48 / MB54 / MB60 / MB66 / MB72 / MB78 / MB84 / MB90 / MB96 / MB108
Inside width (in.)	48 / 54 / 60 / 66 / 72 / 78 / 84 / 90 / 96 / 108
Struck capacity (cu. ft.)	11.2 / 12.6 / 14.0 / 15.5 / 16.9 / 18.3 / 19.7 / 21.0 / 22.5 / 25.3
SAE heaped capacity (cu. ft.)	13.9 / 15.8 / 17.6 / 19.4 / 21.3 / 23.1 / 24.9 / 26.8 / 28.6 / 32.3
Approx. weight (lbs.)	385 / 415 / 440 / 465 / 490 / 525 / 550 / 590 / 615 / 675
Material	3/16" material, 1/4" end plates
Cutting edge	3/4 X 4 bevelled cutting edge
Depth and height	28" deep, 25" high

Source: HLA Attachments Standard Front End Loader Bucket, Regular Duty page.

HLA bucket

HLA Standard Front End Loader Bucket, Heavy Duty

A heavy duty loader bucket built from 1/4 in. material with a 3/4 x 6 cutting edge, 30 in. deep.

48-108in. inside width

13.9-32.3cu. ft. SAE heaped

1/4"material

• Reinforced top lip
• Reinforced round back and end plates for strength, easy filling & clean out
• Flat top acts as level indicator
• Drilled for standard bolt on cutting edge

Full specifications

Part numbers	MB48HD / MB54HD / MB60HD / MB66HD / MB72HD / MB78HD / MB84HD / MB90HD / MB96HD / MB108HD
Inside width (in.)	48 / 54 / 60 / 66 / 72 / 78 / 84 / 90 / 96 / 108
Struck capacity (cu. ft.)	11.2 / 12.6 / 14 / 15.5 / 16.9 / 18.3 / 19.7 / 21 / 22.5 / 25.3
SAE heaped capacity (cu. ft.)	13.9 / 15.8 / 17.6 / 19.4 / 21.3 / 23.1 / 24.9 / 26.8 / 28.6 / 32.3
Approx. weight (lbs.)	470 / 510 / 545 / 585 / 630 / 670 / 700 / 740 / 790 / 875
Material	1/4" material, 1/4" end plates
Cutting edge	3/4 X 6 bevelled cutting edge
Depth and height	30" deep, 25" high

Source: HLA Attachments Standard Front End Loader Bucket, Heavy Duty page.

HLA bucket

HLA High Volume Front End Loader Bucket, Regular Duty

A deeper, taller loader bucket: 34 in. deep and 30 in. high, up to 49.9 cu. ft. heaped.

60-108in. inside width

27.2-49.9cu. ft. SAE heaped

34" x 30"deep x high

• Reinforced top lip
• Flat top acts as level indicator
• Drilled for standard bolt on cutting edge
• Tapered end plates are self-cleaning and reduces material build-up

Full specifications

Part numbers	MBHV60 / MBHV66 / MBHV72 / MBHV78 / MBHV84 / MBHV96 / MBHV108
Inside width (in.)	60 / 66 / 72 / 78 / 84 / 96 / 108
Struck capacity (cu. ft.)	22.7 / 25.0 / 27.3 / 29.5 / 31.8 / 36.3 / 40.9
SAE heaped capacity (cu. ft.)	27.2 / 30.0 / 32.9 / 35.7 / 38.5 / 44.2 / 49.9
Approx. weight (lbs.)	545 / 560 / 590 / 635 / 665 / 705 / 920
Material	3/16" material, 1/4" end plates
Cutting edge	3/4 X 4 bevelled cutting edge
Depth and height	34" deep, 30" high

Source: HLA Attachments High Volume Front End Loader Bucket, Regular Duty page.

HLA bucket

HLA Compact Utility Bucket, Front End Loader

A light bucket for compact tractor loaders, from 36 to 72 in. wide.

36-72in. inside width

5.5-11.5cu. ft. SAE heaped

175-260lbs.

• 80° slope on back of bucket
• Flat top acts as level indicator
• Drilled for standard bolt on cutting edge

Full specifications

Part numbers	MBC36 / MBC42 / MBC48 / MBC54 / MBC60 / MBC66 / MBC72
Inside width (in.)	36 / 42 / 48 / 54 / 60 / 66 / 72
Struck capacity (cu. ft.)	4.5 / 5.2 / 6.0 / 6.7 / 7.5 / 8.2 / 9.0
SAE heaped capacity (cu. ft.)	5.5 / 6.6 / 7.5 / 8.5 / 9.5 / 10.5 / 11.5
Approx. weight (lbs.)	175 / 185 / 200 / 215 / 230 / 240 / 260
Material	1/8" material, 3/16" end plates
Cutting edge	1/2 X 4 bevelled cutting edge
Depth and height	19" deep, 19" high

Source: HLA Attachments Compact Utility Bucket, Front End Loader page.

HLA bucket

HLA Standard Skidsteer Bucket, Regular Duty

A general purpose skid steer bucket in nine widths, from 48 to 96 in.

48-96in. inside width

13.6-27.9cu. ft. SAE heaped

400-640lbs.

• Reinforced top lip
• Flat top acts as level indicator
• Drilled for standard bolt on cutting edge
• Tapered end plates are self-cleaning and reduces material build-up

Full specifications

Part numbers	SB48 / SB54 / SB60 / SB66 / SB72 / SB78 / SB84 / SB90 / SB96
Inside width (in.)	48 / 54 / 60 / 66 / 72 / 78 / 84 / 90 / 96
Struck capacity (cu. ft.)	11.0 / 12.3 / 13.7 / 15.0 / 16.5 / 17.8 / 19.2 / 20.6 / 21.9
SAE heaped capacity (cu. ft.)	13.6 / 15.4 / 17.2 / 19.0 / 20.8 / 22.5 / 24.3 / 26.1 / 27.9
Approx. weight (lbs.)	400 / 425 / 455 / 480 / 510 / 545 / 575 / 610 / 640
Material	3/16" material, 1/4" end plates
Cutting edge	3/4 X 4 bevelled cutting edge
Depth and height	28" deep, 26" high

Source: HLA Attachments Standard Skidsteer Bucket, Regular Duty page.

HLA bucket

HLA Standard Skidsteer Bucket, Heavy Duty

The heavy duty skid steer bucket, with 1/4 in. material and a 3/4 x 6 cutting edge.

48-96in. inside width

475-795lbs.

1/4"material

• Reinforced top lip
• Reinforced round back and end plates for strength, easy filling & clean out
• Flat top acts as level indicator
• Drilled for standard bolt on cutting edge

Full specifications

Part numbers	SB48HD / SB54HD / SB60HD / SB66HD / SB72HD / SB78HD / SB84HD / SB90HD / SB96HD
Inside width (in.)	48 / 54 / 60 / 66 / 72 / 78 / 84 / 90 / 96
Struck capacity (cu. ft.)	11.0 / 12.3 / 13.7 / 15 / 16.5 / 17.8 / 19.2 / 20.6 / 21.9
SAE heaped capacity (cu. ft.)	13.6 / 15.4 / 17.2 / 19 / 20.8 / 22.5 / 24.3 / 26.1 / 27.9
Approx. weight (lbs.)	475 / 515 / 550 / 590 / 625 / 675 / 710 / 760 / 795
Material	1/4" material, 1/4" end plates
Cutting edge	3/4 X 6 bevelled cutting edge
Depth and height	30" deep, 26" high

Source: HLA Attachments Standard Skidsteer Bucket, Heavy Duty page.

HLA bucket

HLA Low Profile Skidsteer Bucket, Regular Duty

A lower back and longer base let the operator see the cutting edge for grading and digging.

48-84in. inside width

11.3-20.4cu. ft. SAE heaped

32" x 19"deep x high

• Lower back and longer base enables operator to see cutting edge of bucket
• Reinforced top lip
• Drilled for standard bolt on cutting edge

Full specifications

Part numbers	SBLP48 / SBLP54 / SBLP60 / SBLP66 / SBLP72 / SBLP78 / SBLP84
Inside width (in.)	48 / 54 / 60 / 66 / 72 / 78 / 84
Struck capacity (cu. ft.)	8.3 / 9.4 / 10.4 / 11.4 / 12.5 / 13.5 / 14.6
SAE heaped capacity (cu. ft.)	11.3 / 12.8 / 14.3 / 16.1 / 17.4 / 18.9 / 20.4
Approx. weight (lbs.)	395 / 420 / 445 / 470 / 500 / 535 / 565
Material	3/16" Material, 1/4" end plates
Cutting edge	3/4 X 4 bevelled cutting edge
Depth and height	32" deep, 19" high

Source: HLA Attachments Low Profile Skidsteer Bucket, Regular Duty page.

HLA bucket

HLA High Volume Skidsteer Bucket, Regular Duty

A big skid steer bucket, 34 in. deep and 31 in. high, up to 46.8 cu. ft. heaped.

60-108in. widths

25.5-46.8cu. ft. SAE heaped

34" x 31"deep x high

• Reinforced top lip
• Flat top acts as level indicator
• Drilled for standard bolt on cutting edge

Full specifications

Part numbers	SBHV60 / SBHV66 / SBHV72 / SBHV78 / SBHV84 / SBHV96 / SBHV108
Inside width (in.)	60 / 66 / 72 / 78 / 84 / 96 / 96
Struck capacity (cu. ft.)	20.8 / 22.9 / 25.0 / 27.1 / 29.1 / 33.3 / 37.5
SAE heaped capacity (cu. ft.)	25.5 / 28.1 / 30.8 / 33.5 / 36.1 / 41.5 / 46.8
Approx. weight (lbs.)	540 / 570 / 605 / 650 / 680 / 760 / 835
Material	3/16" material, 1/4" end plates
Cutting edge	3/4 X 4 bevelled cutting edge
Depth and height	34" deep, 31" high

Source: HLA Attachments High Volume Skidsteer Bucket, Regular Duty page.

HLA bucket

HLA 4-in-1 Bucket

A clam bucket for skid steers and loaders, with 2-1/2 x 8 in. cylinders included.

66-84in. inside width

2-1/2" x 8"cylinders

1/4"main bucket material

• Includes 2-1/2"x 8" cylinders
• 3/8" end plates
• 3/8" clam floor bottom
• Drilled for standard bolt on cutting edge

Full specifications

Part numbers	SBFNO66 / SBFNO72 / SBFNO78 / SBFNO84 / MBFNO66 / MBFNO72 / MBFNO78 / MBFNO84
Inside width (in.)	66 / 72 / 78 / 84 / 66 / 72 / 78 / 84
Struck capacity (cu. ft.)	10.6 / 11.6 / 12.5 / 13.5 / 15.7 / 17.1 / 18.5 / 20
SAE heaped capacity (cu. ft.)	12.8 / 15.1 / 16.4 / 17.7 / 20 / 21.9 / 23.8 / 25.7
Approx. weight (lbs.)	966 / 1027 / 1087 / 1141 / 1030 / 1098 / 1158 / 1227
Depth and height	Skidsteer - 29" deep, 20" high / Loader - 33" deep, 26" high
Material	Main bucket material 1/4"

Source: HLA Attachments 4-in-1 Bucket page.

HLA bucket

HLA High Dump Bucket

Raises dump-out height up to 48 in., with a flat bottom for easier clean out.

48"dump-out height increase, up to

36-96in. outside width

6.7-49.0cu. ft. SAE heaped

• High dump bucket increases dump out height up to 48"
• Exclusive flat bottom bucket design allows for easier clean out & no capacity sacrifice
• Soft Stop Cylinder for reduced vibration
• Drilled for standard bolt on cutting edge

Full specifications

Part numbers	HRBC36 / HRBC42 / HRBC48 / HRBC54 / HRBC60 / HRB60 / HRB66 / HRB72 / HRB78 / HRB84 / HRB96 / HRBHV60 / HRBHV66 / HRBHV72 / HRBHV78 / HRBHV84 / HRBHV96
Outside width (in.)	36 / 42 / 48 / 54 / 60 / 60 / 66 / 72 / 78 / 84 / 96 / 60 / 66 / 72 / 78 / 84 / 96
Struck capacity (cu. ft.)	5.3 / 6.5 / 7.4 / 8.4 / 9.5 / 17.9 / 19.9 / 21.9 / 23.9 / 25.9 / 29.9 / 24.2 / 26.9 / 29.5 / 32.2 / 34.9 / 40.3
SAE heaped capacity (cu. ft.)	6.7 / 8.1 / 9.6 / 11 / 12.5 / 23.2 / 25.9 / 28.7 / 31.5 / 34.3 / 39.9 / 28.8 / 32.2 / 35.5 / 38.9 / 42.3 / 49.0
Approx. weight (lbs.)	530 / 565 / 595 / 625 / 655 / 870 / 905 / 955 / 1050 / 1085 / 1190 / 980 / 1030 / 1100 / 1205 / 1230 / 1340
Depth and height	Compact 28" deep, 21" high / Standard 39" deep, 29" high / HV 39" deep, 33" high

Source: HLA Attachments High Dump Bucket page.

HLA bucket

HLA Side Discharge Sand Bucket

A belt-floor bucket that unloads sand, soil, gravel or stone dust out either side.

2/3-1 2/3cu. yd. heaped

12GPM minimum

60-96in. inside width

• Discharge from either side of machine
• Baffle brace and beater to improve flow and keep weight off belt
• Two hydraulic motors on discharge belt (72", 84" & 96" only)
• Bolted adaptation for loader quick-tach. Easily convert to most loaders

Full specifications

Part numbers	SSB60 / SSB72 / SSB84 / SSB96
Inside width (in.)	60 / 72 / 84 / 96
Heaped capacity (cu. yd.)	2/3 / 1 / 1 1/3 / 1 2/3
Approx. weight (lbs.)	1000 / 1085 / 1175 / 1510
Hydraulic flow	Minimum 12 GPM required
Outside dimensions	34"H x 50"L outside dimensions

Source: HLA Attachments Side Discharge Sand Bucket page.

HLA bucket

HLA Telescopic Handler Bucket, Standard

A 43 in. deep material bucket for telehandlers, 84 to 108 in. wide.

1.82-2.34cu. yd. SAE heaped

84-108in. inside width

43" x 35"deep x high

• Reinforced top lip
• 3/4 x 8 bolt-on double bevel edge optional
• Drilled for standard bolt on cutting edge

Full specifications

Part numbers	THMB84 / THMB96 / THMB108
Inside width (in.)	84 / 96 / 108
Struck capacity (cu. yd.)	1.47 / 1.7 / 1.89
SAE heaped capacity (cu. yd.)	1.82 / 2.1 / 2.34
Approx. weight (lbs.)	1045 / 1095 / 1130
Material	3/16" material, 1/4" end plates
Cutting edge	3/4 X 6 bevelled cutting edge
Depth and height	43" deep, 35" high

Source: HLA Attachments Telescopic Handler Bucket, Standard page.

HLA fork

HLA 2,000 LB Cap. Heavy Duty Pallet Fork

Heavy duty pallet fork rated 2000 lbs at 24 in. load center, with Class II hook type tines and a guard.

2000lbs. @ 24" L.C.

36-48in. tines

32" - 50"carriage width

• 1 1/2" x 3 1/8" Class II hook type solid fork lift tines
• C/w guard

Full specifications

Capacity	2000 lbs capacity @ 24" L.C.
Tines	1 1/2" x 3 1/8" Class II hook type solid fork lift tines
Carriage width	Carriage width 32" - 50"
Tine length	42" / 36" / 48"
Approx. weight (lbs.)	340 / 310 / 350
Part numbers	HD2042 / HD2036 / HD2048

Source: HLA Attachments 2,000 LB Cap. Heavy Duty Pallet Fork page.

HLA fork

HLA 4,200 LB Cap. Heavy Duty Pallet Fork

A 50 in. carriage with sliding tines that lock in any position.

4200lbs. @ 20" L.C.

42 / 48in. tines

50"carriage

• 1-3/8" x 4" Class II hook type solid fork lift tines
• Tines can be locked in any position
• Available with Economy or Domestic Tines
• OPTIONAL - Full back guard (Brick Guard)

Full specifications

Capacity	4200 lbs capacity @ 20" L.C.
Tines	1-3/8" x 4" Class II hook type solid fork lift tines
Carriage width	50" wide carriage
Tine length	42" / 42" / 48" / 48"
Approx. weight (lbs.)	405 / 405 / 425 / 425
Part numbers	HD4242W / HD4242 / HD4248W / HD4248

Source: HLA Attachments 4,200 LB Cap. Heavy Duty Pallet Fork page.

HLA fork

HLA 5,500 LB Cap. Heavy Duty Pallet Fork

Rated 5500 lbs at 24 in. load center, with Class II hook type tines from 42 to 72 in. long.

5500lbs. @ 24" L.C.

42-72in. tines

50"carriage

• 1-½" x 4" Class II hook type solid fork lift tines
• Sliding adjustable
• Tines can be locked in any position
• OPTIONAL - full back guard option (Brick Guard)

Full specifications

Capacity	5500 lbs capacity @24" L.C.
Tines	1-½" x 4" Class II hook type solid fork lift tines
Carriage width	50" wide carriage
Tine length	42" / 42" / 48" / 48" / 54" / 60" / 72"
Approx. weight (lbs.)	455 / 455 / 480 / 480 / 495 / 515 / 570
Part numbers	HD5542W / HD5542 / HD5548W / HD5548 / HD5554 / HD5560 / HD5572

Source: HLA Attachments 5,500 LB Cap. Heavy Duty Pallet Fork page.

HLA fork

HLA Power Tilting Pallet Fork

A cylinder tilts the tines 45 degrees each way, made for uneven job sites.

45°tilt each way

5500 / 7500lbs. models

42-54in. tines

• Rotation is powered by a cylinder for smooth operation
• Adjustable tines
• Levels 45 degrees each way
• Great for uneven job sites

Full specifications

Capacity	5500 Lbs / 7500 Lbs
Tilt	Levels 45 degrees each way
Tine length	42" / 48" / 54" / 48" / 54"
Approx. weight (lbs.)	750 / 770 / 790 / 940 / 970
Part numbers	HDO5542 / HDO5548 / HDO5554 / HDO7548 / HDO7554

Source: HLA Attachments Power Tilting Pallet Fork page.

HLA fork

HLA Bucket Pallet Fork

Fork tines for a loader bucket edge, with a 1.25 in. opening and no tools or bolts needed.

1000 / 2000lb. sets

1.25"bucket edge opening

• 1.25" opening for bucket edge
• No tools or bolts needed

Full specifications

Capacity	1000 Lb. / 2000 Lb.
Size	3" x 2" x 32" Long / 4" x 2" x 44" Long
Approx. weight	78 LBS / SET / 143 LBS / SET
Part numbers	BFT3532 / BFT6544

Source: HLA Attachments Bucket Pallet Fork page.

HLA fork

HLA Stone Fork (Retainer Style Tine), Regular Duty

Retainer style tines 1-1/4 in. thick on 2-1/2 in. spacing, with 400 Brinell points.

5500lbs. capacity

55-92in. models

1-¼"tines

• Tines are 1-¼" in diameter
• 2-½" spacing between tines
• Points are 5/8" thick, 400 Brinell high strength steel

Full specifications

Capacity	5500 lbs capacity
Tines	Tines are 1-¼" in diameter
Tine spacing	2-½" spacing between tines
Depth and height	23" high / 40" deep
Approx. weight (lbs.)	570 / 630 / 690 / 745 / 805 / 865
Part numbers	SFR55 / SFR62 / SFR70 / SFR77 / SFR84 / SFR92

Source: HLA Attachments Stone Fork (Retainer Style Tine), Regular Duty page.

HLA fork

HLA Stone Fork (Retainer Style Tine), Heavy Duty

A heavy duty stone fork rated 9500 lbs, with 1-3/4 in. tines on 2-3/4 in. spacing.

9500lbs. capacity

77-108in. models

1-¾"tines

• Tines are 1-¾" in diameter
• 2-¾" spacing between tines
• Points are ¾" thick, 400 Brinell high strength steel

Full specifications

Capacity	9500 lbs capacity
Tines	Tines are 1-¾" in diameter
Tine spacing	2-¾" spacing between tines
Depth and height	31" high / 50" deep
Approx. weight (lbs.)	1325 / 1455 / 1520 / 1590 / 1655 / 1720 / 1785
Part numbers	SFRH77 / SFRH85 / SFRH90 / SFRH94 / SFRH98 / SFRH103 / SFRH108

Source: HLA Attachments Stone Fork (Retainer Style Tine), Heavy Duty page.

HLA fork

HLA Landscape Stone Picker (with Power Reel)

A stone picker with a power reel, made for picking up windrows of stones and loose stones when preparing seed beds.

72-108in. widths

1-3/4"tine spacing

1200-1600lbs.

• Tines are 3/4" in diameter
• 1-3/4" spacing between tines
• Points are 1/2" thick, 400 Brinell high strength steel
• Ideal for picking up both windrows of stones and loose stones in soil being prepared for seed beds

Full specifications

Tines	Tines are 3/4" in diameter
Tine spacing	1-3/4" spacing between tines
Depth and height	32" high / 35-1/2" deep
Approx. weight (lbs.)	1200 / 1330 / 1465 / 1600
Width (in.)	72 / 84 / 96 / 108
Part numbers	SFRL72 / SFRL84 / SFRL96 / SFRL108

Source: HLA Attachments Landscape Stone Picker (with Power Reel) page.

HLA fork

HLA Manure Fork (Cranked Kverneland Tine)

Cranked Kverneland tines for superior penetration, in widths from 42 in. light duty to 96 in.

42-96in. widths

6-13cranked tines

245-590lbs.

• LDFE 32" Conus I cranked Kverneland tines (28" useable length)
• MFE 35" Conus I cranked Kverneland tines (31" useable length)
• Flat top acts as level indicator

Full specifications

Tines	LDFE 32" Conus I cranked Kverneland tines (28" useable length) / MFE 35" Conus I cranked Kverneland tines (31" useable length)
Width (in.)	42 / 48 / 48 / 54 / 60 / 66 / 72 / 84 / 96
Tine centers (in.)	7.75 / 7.5 / 7.5 / 8.5 / 8.25 / 8 / 8.625 / 8.125 / 7.875
Approx. weight (lbs.)	245 / 270 / 350 / 370 / 405 / 435 / 455 / 520 / 590
Part numbers	LDFE42 / LDFE48 / MFE48 / MFE54 / MFE60 / MFE66 / MFE72 / MFE84 / MFE96

Source: HLA Attachments Manure Fork (Cranked Kverneland Tine) page.

HLA grapple

HLA Regular Utility Grapple

A grapple for HLA buckets and forks that holds 4 ft round bales, manure and other material.

70"opening

66-84in. widths

475-515lbs.

• Can be fitted to models SB, SBHV, MB, MBHV, MFE, & SFR
• Accommodates 4ft round bales
• Opens up to 70"
• Comes with cylinders

Full specifications

Opening	Opens up to 70"
Fits	Can be fitted to models SB, SBHV, MB, MBHV, MFE, & SFR
Width (in.)	66 / 72 / 84
Approx. weight (lbs.)	475 / 490 / 515
Part numbers	GR66 / GR72 / GR84

Source: HLA Attachments Regular Utility Grapple page.

HLA grapple

HLA Compact Utility Grapple

A small grapple for HLA compact buckets and light duty manure forks.

37-½"opening

42 / 48in. widths

129-136lbs.

• To be fitted on models SBC, MBC & LDFE
• Heavy duty welded cylinder
• Opens up to 37-½"

Full specifications

Opening	Opens up to 37-½"
Fits	To be fitted on models SBC, MBC & LDFE
Width (in.)	42 / 48
Approx. weight (lbs.)	129 / 136
Part numbers	GRC42 / GRC48

Source: HLA Attachments Compact Utility Grapple page.

HLA grapple

HLA Large Utility Grapple

A heavy duty grapple for large round and square bales, opening to 85 in.

85"opening

6 ftround bales

72-96in. widths

• Specific heavy duty design for handling large round and square bales
• Removable / bolt-on mounting posts
• Accommodates 6 ft round bales

Full specifications

Opening	Opens up to 85"
Fits	Can be fitted to models SB, SBHV, MB, MBHV, MBHVX, & THMB (Does not fit THMBHV & THMBHVX buckets)
Width (in.)	72 / 84 / 96
Approx. weight (lbs.)	640 / 655 / 690
Part numbers	GRL72 / GRL84 / GRL96

Source: HLA Attachments Large Utility Grapple page.

HLA grapple

HLA Brush Grapple

Independent grapples for clamping awkward loads of brush.

48"opening

66-96in. models

5-1/2"tine spacing

• Tine tips and grapple tips are AR400 material
• Independent grapples for clamping of awkward loads
• Comes with 2-1/2" x 8" cylinders

Full specifications

Opening	Opens to 48" wide from ground to point of grapple
Tine spacing	Tine spacing 5-1/2" between
Approx. weight (lbs.)	830 / 865 / 930 / 1005
Part numbers	BRG66 / BRG72 / BRG84 / BRG96

Source: HLA Attachments Brush Grapple page.

HLA grapple

HLA Root Rake c/w Grapple

A root rake with two independent grapples for complete clamping on awkward loads.

48-1/2"opening

66-96in. models

7"tine spacing

• Two independent grapples for complete clamping on awkward loads
• Points are 1/2" thick, AR400 material
• Comes with 2-1/2" x 8" cylinders

Full specifications

Opening	Opens up to 48-1/2"
Tine spacing	7" center to center tine spacing
Height closed	34" overall height when closed
Approx. weight (lbs.)	985 / 1070 / 1125 / 1200
Part numbers	RRG66 / RRG78 / RRG88 / RRG96

Source: HLA Attachments Root Rake c/w Grapple page.

HLA grapple

HLA Log Grapple

The grapple version of the HD55 and HD75 pallet forks.

5500 / 7500lbs. capacity

42-54in. tines

800-1060lbs.

• Grapple version of HD55/HD75 pallet fork
• C/w HD Cylinders

Full specifications

Capacity	5500/7500 lbs capacity
Approx. weight (lbs.)	800 / 820 / 1030 / 1060
Part numbers	LG5542 / LG5548 / LG7548 / LG7554

Source: HLA Attachments Log Grapple page.

HLA grapple

HLA Post and Tree Puller

Pulls wood or steel fence posts, brush, trees and shrubs.

14"jaw opening

28"jaw length

350lbs.

• Open plate design for increased visibility
• 1/2" AR400 serrated teeth provide firm hold
• 1.5" greasable jaw pivot pin
• Includes hydraulic hoses and flat-faced couplers

Full specifications

Jaw	28" long single pivoting jaw
Opening	14" maximum jaw opening
Part numbers	PTP1428
Approx. weight (lbs.)	350

Source: HLA Attachments Post and Tree Puller page.

HLA bale and silage tool

HLA Round Bale Grapple (BG4000)

Gentle handling for heavy wrapped silage bales up to 5 ft across.

1800lbs. capacity

5'max bale diameter

570lbs.

• Designed for gentle handling of heavy wrapped silage bales
• Lockable arms, one arm can be locked in a fixed position using pins so that all movement occurs in the other arm. Useful for stacking.

Full specifications

Capacity	1800 lbs capacity
Bale size	Works with up to 5' diameter bales
Approx. weight (lbs.)	570
Part numbers	BG4000

Source: HLA Attachments Round Bale Grapple (BG4000) page.

HLA bale and silage tool

HLA Square/Round Bale Grapple (BG6000)

The round bale grapple with arms that also take 4-6 ft square bales.

2000lbs. capacity

84"opening

590lbs.

• Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft diameter
• Opens up to 84"

Full specifications

Capacity	2000 lbs capacity
Bale size	square bales 4 - 6 ft long and round bales 5-6 ft diameter
Opening	Opens up to 84"
Approx. weight (lbs.)	590
Part numbers	BG6000

Source: HLA Attachments Square/Round Bale Grapple (BG6000) page.

HLA bale and silage tool

HLA Square Bale Squeeze (BG7000)

A square bale squeeze with slim brace arms for tight stacking of bales.

3000lbs. capacity

86"extended

810lbs.

• Arms are 50" long, 20" tall
• Dual 2 1/2" x 28" stroke cylinder
• Slim brace arm design allows for tight stacking of bales

Full specifications

Capacity	3000 lbs capacity
Opening	86" extended 30" Retracted
Arms	Arms are 50" long, 20" tall
Approx. weight (lbs.)	810
Part numbers	BG7000

Source: HLA Attachments Square Bale Squeeze (BG7000) page.

HLA bale and silage tool

HLA Three Prong Bale Spear

Made for large 4 x 4 x 8 ft square bales, one bale at a time.

5000lbs. @ 24" L.C.

50"frame width

210lbs.

• Kverneland tines @ 23" spacing
• Made to handle large 4' x 4' x 8' square bales
• Available with 32", 39" or 49" tines

Full specifications

Capacity	5000 lbs capacity @ 24" L.C.
Tines	32" / 39" / 49"
Frame width	Frame width 50"
Approx. weight (lbs.)	210
Part numbers	TE5032 / TE5039 / TE5049

Source: HLA Attachments Three Prong Bale Spear page.

HLA bale and silage tool

HLA Double Prong Bale Spear

Two tines on 30 in. spacing for round bales or large square bales.

4000lbs. @ 24" L.C.

50"frame width

185lbs.

• Kverneland tines @ 30" spacing
• Works well for either round bales or large square bales
• Available with 32", 39" or 49" tines

Full specifications

Capacity	4000 lbs capacity @ 24" L.C.
Tines	32" / 39" / 49"
Frame width	Frame width 50"
Approx. weight (lbs.)	185
Part numbers	DE5032 / DE5039 / DE5049

Source: HLA Attachments Double Prong Bale Spear page.

HLA bale and silage tool

HLA Four Prong Bale Spear For Round Bales

A 100 in. frame that carries two round bales up to 6 ft across.

2round bales

4000lbs. @ 24" L.C.

100"frame width

• Designed specifically for carrying 2 round bales
• Can carry 2 round bales up to 6' diameter
• Kverneland tines, each side @ 29" spacing

Full specifications

Capacity	4000 lbs capacity @ 24" L.C.
Tines	39" / 49"
Frame width	Frame width 100"
Approx. weight (lbs.)	340
Part numbers	FE10039 / FE10049

Source: HLA Attachments Four Prong Bale Spear For Round Bales page.

HLA bale and silage tool

HLA Single Three Point Hitch Spear

A single tine bale spear for the tractor three point hitch, with a Reese receiver hitch (ball hitch not included).

2000lbs. @ 24" L.C.

CAT I & IIhitch

87lbs.

• Reese receiver / ball hitch (Ball hitch not included)
• Fits both CAT I & II
• 2 stabilizer tines

Full specifications

Capacity	2000 lbs capacity @ 24" L.C.
Tines	39" / 49"
Hitch	Fits both CAT I & II
Approx. weight (lbs.)	87
Part numbers	SE3PH39 / SE3PH49

Source: HLA Attachments Single Three Point Hitch Spear page.

HLA bale and silage tool

HLA Silage Facer, Frame Mount

A hydraulic facing drum with 400 Brinell teeth, on a 4 to 10 ft frame.

72-96in. facer widths

20-40GPM

1010-1380lbs.

• 400 Brinell high tensile steel teeth on drum
• Includes hose kit and flat-faced couplers
• Dual drive motors
• Heavy duty roller drive chains

Full specifications

Hydraulic flow	Minimum 20 GPM required / Maximum flow 40 GPM
Facer width (in.)	72 / 72 / 72 / 72 / 84 / 84 / 84 / 84 / 96 / 96 / 96 / 96
Frame length (ft.)	4 / 6 / 8 / 10 / 4 / 6 / 8 / 10 / 4 / 6 / 8 / 10
Approx. weight (lbs.)	1010 / 1075 / 1180 / 1240 / 1085 / 1150 / 1255 / 1315 / 1150 / 1215 / 1320 / 1380
Part numbers	SBFD72 / SBFD726 / SBFD728 / SBFD7210 / SBFD84 / SBFD846 / SBFD848 / SBFD8410 / SBFD96 / SBFD966 / SBFD968 / SBFD9610

Source: HLA Attachments Silage Facer, Frame Mount page.

HLA bale and silage tool

HLA Silage Grapple Bucket

A high volume bucket with a grapple built in, on a pivoting arc for more power and less disturbance of the bunk silo face.

39.5-104.6cu. ft. heaped

72-108in. inside width

3 X 16cylinders

• Heavy duty grapple integrated into the bucket design
• Strategic pivoting arc design on the grapple for more power and less disturbance of the bunk silo face
• 3/4" AR400 bolt on grapple teeth

Full specifications

Part numbers	MBHVSG72 / MBHVSG84 / MBHVSG96 / MBHVSG108 / THMBHVSG96 / THMBHVSG108
Inside width (in.)	72 / 84 / 96 / 108 / 96 / 108
Struck capacity (cu. ft.)	27.3 / 31.8 / 36.3 / 40.9 / 59.4 / 68.1
Heaped capacity (cu. ft.)	39.5 / 46.2 / 52.9 / 59.7 / 93 / 104.6
Approx. weight (lbs.)	1555 / 1730 / 1915 / 2195 / 2260 / 2435

Source: HLA Attachments Silage Grapple Bucket page.

HLA bale and silage tool

HLA 6000 Series Silage Blade

A 14 to 18 ft silage blade for articulated tractors, on a custom-fitted undermount.

14-18ft blades

63"blade height

5315-6000lbs.

• Designed for articulated tractors only
• Dual hydraulic angle cylinders
• Hydraulic radial lift
• Reversible and replaceable 1060 carbon steel cutting edge

Full specifications

Blade width	14’ / 16’ / 18’
Height	63" high blade (42" high moldboard, 21" high mesh guard)
Approx. weight (lbs.)	5315 / 5660 / 6000
Part numbers	DBA600014 / DBA600016 / DBA600018

Source: HLA Attachments 6000 Series Silage Blade page.

HLA bale and silage tool

HLA Bale Knife, Loader Mount

Slices wrapped round bales up to 72 in. and holds the plastic and net wrap out of the mixer.

72"max bale diameter

Up to 30%less TMR processing time, the maker says

2700PSI minimum

• Proprietary grabber holds and retains plastic and net wrap, eliminates tails dropping into mixer
• Individual bolt on knives for easy replacement
• The BK60 and 72 have adjustable bumper to accommodate bales down to 48"

Full specifications

Bale diameter (in.)	48 / 48-60 / 48-72
Bale width (in.)	60 / 60 / 72
Approx. weight (lbs.)	1460 / 1570 / 2025
Hydraulic pressure	Minimum hydraulic pressure: 2700 PSI
Part numbers	BK48LF / BK60LF / BK72LF

Source: HLA Attachments Bale Knife, Loader Mount page.

HLA bale and silage tool

HLA Heavy Duty Rubber Free Stall Scraper

An 18 in. high rubber free stall scraper with an enclosed frame and splash plate.

18"rubber

60-96in. widths

340-410lbs.

• Heavy duty rubber for longer life
• Deeper scraper for more volume and smoother operation
• Enclosed frame with splash plate

Full specifications

Width (in.)	60 / 72 / 84 / 96
Approx. weight (lbs.)	340 / 355 / 380 / 410
Rubber	18" high rubber
Part numbers	RSH60 / RSH72 / RSH84 / RSH96

Source: HLA Attachments Heavy Duty Rubber Free Stall Scraper page.

HLA site tool

HLA Big Arm Backhoe for Skidsteer

A 6 ft digging backhoe that QTachs to most skid steers.

6 ftdigging depth

140°swing

9-20in. buckets

• QTach to most skidsteer loaders
• Hydraulic swing cylinder with 140° swing
• Second boom mount on side of frame for digging along side foundations etc.

Full specifications

Digging depth	6 ft digging depth
Swing	Hydraulic swing cylinder with 140° swing
Controls	Single electric selector valve with universal electro-hydraulic harness kit. 12V or 24V coils available.
Weight less bucket (lbs.)	595
Buckets	9" / 12" / 15" / 18" / 20"
Part numbers	BH600

Source: HLA Attachments Big Arm Backhoe for Skidsteer page.

HLA site tool

HLA Heavy Duty Dirt Blade

A 24 in. high dirt blade for skid steers and front end loaders, with hydraulic angle and power tilt.

35°hydraulic angle

5°power tilt

72-96in. widths

• Heavy duty construction with two angle cylinders
• Reversible cutting edge
• Bolt-on skid shoes
• 35° hydraulic angle left and right

Full specifications

Moldboard	24" high moldboard
Angle	35° hydraulic angle left and right
Tilt	Blade oscillates 5° hydraulically either way for side leveling (Includes electric selector valve)
Approx. weight (lbs.)	1115 / 1175 / 1220
Part numbers	DB72 / DB84 / DB96

Source: HLA Attachments Heavy Duty Dirt Blade page.

HLA site tool

HLA Skidsteer Laser Grader

A push-pull laser grader that levels within 1/4 in. of target grade; laser and grade control electronics are not included.

1/4"of target grade

84 / 96in. models

2-1/2" x 6"cross-slope cylinders

• Push-pull design for grading in forward or reverse
• Reversible cutting edges
• Universal laser mast mount
• Control valve included, does not include laser or grade control electronics

Full specifications

Accuracy	Levels consistently within 1/4" of target grade
Cross-slope	Two 2-1/2" x 6" cylinders provide cross-slope operation
Approx. weight (lbs.)	1,610 / 2,095
Part numbers	SLG84 / SLG96

Source: HLA Attachments Skidsteer Laser Grader page.

HLA site tool

HLA Hydraulic Rotary Broom

A hydraulic angle broom with gauge wheels and lateral and forward float.

30°angle each way

12-20GPM

60-96in. widths

• Unique lateral and forward float
• Gauge wheels
• Hydraulic angle 30° right and left
• Direct motor drive on broom

Full specifications

Hydraulic requirements	12-20 GPM @ 1500 - 3000 PSI
Bristles	26" diameter poly/steel bristle wafers
Poly wafers	15 / 18 / 21 / 24
Approx. weight (lbs.)	1040 / 1075 / 1110 / 1145
Part numbers	BR60 / BR72 / BR84 / BR96

Source: HLA Attachments Hydraulic Rotary Broom page.

HLA site tool

HLA Hydraulic Limb Saw

Cuts tree limbs up to 14 ft out from the safety of the skid steer or tractor seat.

14'reach

25"Stihl bar

15GPM @ 3000 PSI

• Automatic chain oiler
• Standard Stihl 25" guide bar and saw chain for easy replacement
• Up to 14' reach with spring tension cut assist

Full specifications

Hydraulic requirements	Requires 15 GPM @ 3000 PSI
RPM	2550 @ 15 GPM
Power	22 hp
Torque	45 ft-lb
Reach (ft)	14
Approx. weight (lbs.)	395
Part numbers	HLS1224

Source: HLA Attachments Hydraulic Limb Saw page.

HLA site tool

HLA Heavy Duty Universal Skidsteer Quick Fit Plate

Lets a mid-size to industrial loader run universal skid steer attachments.

5500lbs. capacity

250lbs.

• Compatible to universal skidsteer attachments
• Spring-loaded over-center lever lock
• Ideal for mid-size to industrial loaders

Full specifications

Capacity	5500 lbs capacity
Approx. weight (lbs.)	250
Part numbers	BOQF10H (BOQF10HYD optional hydraulic activated)

Source: HLA Attachments Heavy Duty Universal Skidsteer Quick Fit Plate page.

HLA site tool

HLA Boom Pole Telescopic (Standard Activated)

A 6 ft boom with a 4 ft telescopic section and a pintle end hook.

3000lbs. closed

1500lbs. extended

6-10ft

• 6 ft main boom with a 4 ft telescopic boom
• Five position telescopic boom
• Pintle end hook with spring-loaded locking arm & pin

Full specifications

Capacity	3000 lbs capacity closed / 1500 lbs capacity extended
Length	6 FT. closed / 10 FT. open
Approx. weight (lbs.)	370
Part numbers	BP120

Source: HLA Attachments Boom Pole Telescopic (Standard Activated) page.

Nothing matches those filters. Clear filters

Options

HLA lists these options on its product pages. Not every option fits every attachment, so check the product page or ask the parts counter.

Also available

• Bolt-on cutting edges

  3/4 X 6 and 3/4 X 8 double bevel edges, and a 3/4 X 6 single bevel serrated edge, with bolts and nuts.

  Loader, skid steer and telehandler buckets

• Knock-on ripper teeth

  Knock on ripper teeth with weld on adapter and flex pin.

  Most loader and skid steer buckets

• Hose kits

  90" hose kits with flat faced couplers, straight or 90° fittings.

  Hydraulic attachments

• Spring hose mount kit

  Listed as an option on most hydraulic HLA attachments.

  Hydraulic attachments

• Full back guard (brick guard)

  Optional full back guard (brick guard) for the carriage.

  4,200 and 5,500 lb pallet forks

• Bolt-on and mesh guards

  Bolt-on guards for the large utility grapple and silage grapple bucket, and mesh guards for the log grapple and post and tree puller.

  Grapples

• Broom kits

  Dust suppression water kit (25 gallons) with spray nozzle, and a kit to reverse broom rotation.

  Hydraulic rotary broom

• CAT 2 three point hitch mount

  Three point hitch mount with tilting cylinder.

  Side discharge bucket