Gates makes V-belts, hydraulic hose and pressure washer hose, from lawn and garden belts to hose for tractors and combines. Clinton Tractor in Clinton, NY is a Gates dealer for farm, construction and outdoor power equipment.
Gates lawn and garden belts include V-belts resistant to heat, oil and cracking and universal belts for commercial and residential equipment. BladeRunner belts match the original belt on common mowers.
Banded, notched, double and variable-speed V-belts for power transmission drives. Gates says Predator belts are for agriculture, construction and wood processing, and its agriculture page names Quad-Power 4 for tractors, combines and irrigation systems.
Gates Hi-Power II beltsArched top, concave sidewalls
Gates Hi-Power II PowerBand belts-22 to 140°F temperature range
Gates Predator PowerBand beltsAt least 40% higher power rating than standard V-belts
Gates Tri-Power beltsAX BX CX available sizes
Gates Super HC XP Notched Premium beltsNotched molded notch design
Gates Quad-Power 4 beltsUp to 30% more power rating vs. standard Gates belts · Up to 200% longer belt life vs. standard Gates belts
Gates Hi-Power II Dubl-V beltsAA BB CC DD cross sections
Gates Multi-Speed beltsNotched molded notchesGates MegaSys MXG 5K and MXT hydraulic hoses are lighter and more flexible than conventional hose, and Gates lists tractors and combines as MXT applications. Clean Master Plus hose is rated for pressure washers up to 6000 psi.
Gates MegaSys MXG 5K hydraulic hose5000 psi working pressure · 1,000,000 impulse cycles with GlobalSpiral couplings · 25X cover abrasion resistance
Gates MegaSys MXT hydraulic hoseUp to 30% lighter · Up to 40% lower force-to-bend · 600,000 impulse cycles
Gates Clean Master Plus PW6000 pressure washer hose6000 psi working pressure · Up to 32% lighterCharles Gates founded Gates in 1911 in Denver, where the company still has its global headquarters. His brother John Gates invented the V-belt, and the first synchronous belt was developed in 1946.
Gates makes fluid power and power transmission products, with more than 13,000 employees and over 100 locations in 30 countries.
Search all 14 Gates belt and hose families by line, name or use.
Showing all 14 models
Lawn and garden belts
Lawn and garden belts built to match the original belt on the most common mowers and outdoor equipment.
Lawn and garden belts
A thin, flexible V-belt for fractional horsepower drives, from lawn and garden equipment to shop tools.
Source: Gates Truflex V-Belts page.
Lawn and garden belts
Green bareback belts for shock-loaded, backside-idler-driven equipment, in a 70-size assortment of top-selling sizes.
Source: Gates PoweRated V-Belts page.
V-belts
V-belts with an arched top and concave sidewalls for even loading and less pulley wear.
Source: Gates Hi-Power II Belts page.
V-belts
Several V-belts joined by a permanent tie band for high-power drives with pulsating loads.
| Temperature range | -30°C to +60°C (-22°F to +140°F) |
|---|---|
| Static conductive | ISO 1813 |
V-belts
Heavy-duty banded belts for shock loads in agriculture, construction and wood processing.
| Temperature range | -30°C to +60°C (-22°F to +140°F) |
|---|
Source: Gates Predator PowerBand Belts page.
V-belts
Molded notch V-belts with a patented ethylene construction for hot, dirty, hard-working drives.
V-belts
Narrow-section belts with precision-molded notches that cut bending stress on small pulleys.
V-belts
A bandless V-belt in a new ethylene elastomer rubber compound, with no re-tensioning.
| Operating temperature | -70ºF to 250ºF |
|---|---|
| Oil and chemical resistance | ARPM IP-3-2 |
Source: Gates Quad-Power 4 page (power and life figures compared to standard Gates products, the maker says).
V-belts
Two-sided double V-belts for serpentine drives with one or more reverse bends.
| Cross sections | AA / BB / CC / DD |
|---|---|
| Temperature range | -30°C to +60°C (-22°F to +140°F) |
Source: Gates Hi-Power Dubl-V Belts page.
V-belts
Variable-speed belts that adjust to the pulley groove across a wide range of speed ratios.
Source: Gates Multi-Speed Belt page.
Hose
Lightweight, flexible 5000 psi hose with a woven spiral build and a tough XtraTuff Plus cover.
| Working pressure | 5000 psi |
|---|---|
| Impulse cycles | 1,000,000 with GlobalSpiral / 600,000 with MegaCrimp |
| Cover | XtraTuff Plus: 25X abrasion resistance, 800+ hour ozone resistance |
| Standards exceeded | ISO 18752 350DC, SAE 100R13, EN856 R13 and ISO 3862 R13 (sizes -10 and -12) |
Source: Gates MXG 5K-XTP product page.
Hose
A lighter, more flexible wire-braid hose for tractors, combines and construction equipment, with an optional XtraTuff Plus cover.
| Temperature range | -40°F to +212°F |
|---|---|
| Impulse test | 600,000 cycles |
| Standards met | SAE 100R16, ISO 11237 R16 and EN857 2SC |
Source: Gates MXT-XTP wire braid hose page.
Hose
A 6000 psi pressure washer hose that is lighter and more flexible than standard versions.
| Working pressure | 6000 psi |
|---|---|
| Intermittent temperature | 300°F (150°C) |
Source: Gates Clean Master Plus PW6000 page.
Nothing matches those filters.
Gates sells through distributors and retailers, and its product pages link to manuals, guides and tech tips and a belt tension calculator. Ask the Clinton Tractor parts counter for Gates belts and hoses. Bring the old belt or hose, or the equipment make and model, when you ask about a match.
Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.
The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.
Clinton Tractor & Implement Co.Call (315) 853-6151 before you drive over and ask which Gates belts and hoses we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.
Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.
Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.
Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.
Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.
