(315) 853-6151
Farm King 3-point snowblower throwing snow behind a red tractor with a front loader

Farm King Implement Dealer in Central New York

Farm King builds snowblowers, augers, hay tools, rotary cutters, finishing mowers and 3-point implements in Morden, Manitoba. Clinton Tractor in Clinton, NY is listed on the Farm King dealer locator for snowblowers, hay tools and grain handling.

Call (315) 853-6151 Compare models

Farm King snowblowers

PTO-driven 3-point snowblowers from 50 to 120 in wide, a Propeller Series for heavy, wet snow and a pull-type model that clears moving forward or backward. Farm King says it has built snowblowers for more than three decades.

Farm King hay tools

Disc and sickle bar mowers, tedders, rotary, wheel and bat rakes, round bale wrappers and carriers for round and square bales. Clinton Tractor is listed for Farm King hay tools on the maker's dealer locator.

Mowers, cutters and 3-point implements

Finishing mowers, rotary cutters, a rotary tiller, scrapers, a landscape rake, a disc, post tools and a Quick Hitch. Many of them are Quick Hitch compatible, the maker says.

Farm King augers and grain handling

Swing-away BackSaver augers, conventional and CX2 augers, utility and unloading augers and grain cleaners. The maker says the BackSaver has been its flagship product for four decades.

Allied by Farm King commercial equipment

Allied by Farm King is the commercial line: skid steer snowblowers, a three-deck finishing mower, rear blades, rotary sweeps and a stump grinder. The maker pitches its rotary sweeps at contractors, municipalities, institutions and farmers.

Farm King history

Farm King began in 1969, when John Buhler bought Standard Engine Gas Works in Morden, Manitoba and renamed it Farm King Ltd. Farm King is one of the brands that have joined Buhler Industries, along with Allied, Inland and Versatile.

Farm King products are built in Morden, Manitoba, Canada. The maker lists grain handling, tillage, hay tools, landscaping equipment and the Allied by Farm King commercial line, sold through a dealer network of over 1,200 North American locations.

  1. 1969John Buhler buys Standard Engine Gas Works in Morden, Manitoba and renames it Farm King Ltd.
  2. 2000John Buhler buys Canada's last remaining tractor plant and renames it Buhler Versatile.
  3. 2007John Buhler sells a majority stake in his company, Buhler Industries, to Rostselmash.
  4. 2023ASKO Holding closes its purchase of 97% of the common shares of Buhler Industries.
  5. 2025Asko takes full ownership of Buhler Industries, the parent of the Farm King brand.
Farm King BackSaver auger with steel trussing set up between grain bins and a loaded grain trailer

Compare Farm King implements

Search all 41 Farm King and Allied machines by line, name or feature. Spec tables are copied from Farm King's product pages and spec sheets.

Showing all 41 models

Red Farm King compact snowblower on the 3-point hitch of an orange compact tractor in deep snow

Farm King snowblower

Farm King Snowblower 500–840

Compact 3-point snowblowers, 50 to 84 in wide, for tractors from 15 to 90 hp.

50–84 incutting width
15–90 hptractor range
4-bladefan
  • PTO driven, attaches to the 3-point hitch
  • Manual, electric or hydraulic spout rotator on models 500, 600 and 660
  • Hydraulic cylinder spout rotator optional on 740 and 840
  • Adjustable and replaceable skid shoes
  • 840G adds an oil bath gearbox
Full specifications
Models500 / 600 / 660 / 740 / 840 / 840G
Cutting width50" / 60" / 66" / 74" / 84"
Cutting height24" / 25"
Fan4-blade
Fan dimensions22" x 7" / 23" x 7"
Drive fan540 RPM
Fan driveopen gear / oil bath gearbox (840G)
Auger diameter15"
Auger drive#50 chain
Spout deflectormanual (6 position) standard; hydraulic cylinder optional
Hitch categoryCat. I standard / Cat. I & II std (840, 840G)
Tractor requirement15 - 30 hp / 20 - 40 hp / 22 - 40 hp / 40 - 70 hp / 60 - 90 hp
Weight422 lb / 470 lb / 515 lb / 756 lb / 848 lb / 878 lb

Source: Farm King Snowblower specifications sheet.

Green Farm King 3-point snowblower on a John Deere tractor with a front loader in an open snowy field

Farm King snowblower

Farm King Snowblower 960–1200

Heavy-duty 3-point snowblowers, 96 to 120 in wide, with dual augers and hydraulic spout rotation.

96–120 incutting width
90–225 hptractor range
36–41 incutting height
  • Dual 15 in augers
  • Hydraulic motor spout rotator is standard
  • Oil bath gearbox on the fan drive
  • Replaceable cutting edge on 1080 and 1200, optional on 960
  • 1000 RPM fan drive on 1080 and 1200
Full specifications
Models960 / 1080 / 1200
Cutting width96" / 108" / 120"
Cutting height36" / 41"
Fan4-blade
Fan dimensions32" x 9" / 34" x 12"
Drive fan540 RPM / 1000 RPM
Auger diameter15" (dual)
Auger drive#60 chain / #80 chain
Spout rotatorhydraulic motor, standard
Hitch categoryCat. II std / Cat. II & III std
Tractor requirement90 - 125 hp / 120 - 180 hp / 180 - 225 hp
Weight1243 lb / 2398 lb / 2600 lb

Source: Farm King Snowblower specifications sheet.

Red Farm King Propeller Series snowblower with cream propeller blades on its paddle-style auger, studio view

Farm King snowblower

Farm King Propeller Series snowblower

Propeller blades on a paddle-style auger for heavy, packed and wet snow.

50 in+Farm King snowblower widths
96–120 inheavy-duty widths
  • Aggressive propeller blades on a paddle-style auger
  • Breaks up larger pieces of snow on the way to the fan
  • Gives a smoother flow of snow into the fan

Source: Farm King Snowblower Propeller Blade page.

Farm King pull type snowblower throwing snow behind a blue New Holland tractor in a farmyard

Farm King snowblower

Farm King Pull Type Snowblower 740 / 840

Pull-type snowblower that works moving forward and backward, with an optional rear scraper for clearing near buildings.

74 / 84 incutting width
30 incutting height
40–90 hptractor range
  • Spout rotator and deflector, manual or hydraulic
  • Works below grade as the tractor drives over the snow
  • Shear bolt protection on all PTOs
  • Replaceable skid shoes and cutting edges
  • Optional rear scraper for backing up to a wall or garage door
Full specifications
Models740 / 840
Cutting width74" / 84"
Cutting height30"
Hitch categoryCAT. II
Tractor requirement40-70 hp / 60-90 hp
Weight765 lb / 995 lb

Source: Farm King Pull Type Snowblower page.

Farm King MDN disc mower lowered into work position behind a tractor on a grass field

Farm King hay tool

Farm King MDN 4, 5, 6, 7 disc mower

3-point disc mowers from 5 ft 5 in to 9 ft 4 in wide, for tractors of 35 to 50 hp.

5' 5"–9' 4"working width
3000 RPMblade speed
35–50 hptractor
  • 15 in discs with free-swinging 4 in blades
  • 3 in blade overlap
  • Single acting cylinder lifts the mower for transport
  • Automatic transport lock, released with a rope from the seat
  • Cone discs at each end help form the swath
Full specifications
ModelsMDN4 / MDN5 / MDN6 / MDN7
Number of discs4 / 5 / 6 / 7
Number of blades8 / 10 / 12 / 14
Working width5' 5" (1.65 m) / 7' (2.10 m) / 8' 1" (2.45 m) / 9' 4" (2.85 m)
Blade rotation speed3000 RPM
3-point hitchCat. I / II
PTO540 RPM
Tractor requirements35 hp (25 kW) / 40 hp (30 kW) / 45 hp (33 kW) / 50 hp (37 kW)
Weight903 lb (410 kg) / 992 lb (450 kg) / 1,058 lb (480 kg) / 1,124 lb (510 kg)

Source: Farm King Disc Mower page.

Farm King Pendolare disc mower with red frame and white cover parked on grass

Farm King hay tool

Farm King Pendolare 245, 285, 320 disc mower

Disc mowers with a central pendulum suspension that lets the cutter bar follow the ground.

8'–10' 8"working width
6–8discs
65–80 hptractor
  • Hot forged steel round discs and forged blades
  • Non-stop cutter bar breakaway re-arms itself
  • Double spring shock absorbers set ground pressure
  • Oil bath gearbox
  • Optional vertical transport position
Full specifications
Models245 / 285 / 320
Working width8' (2.4 m) / 9' 4" (2.87 m) / 10' 8" (3.29 m)
Conditioner typen/a
Number of discs6 / 7 / 8
Number of blades12 / 14 / 16
Tractor requirements65 hp / 75 hp / 80 hp
Weight1,370 lb (621 kg) / 1,525 lb (692 kg) / 1,675 lb (760 kg)

Source: Farm King Pendolare Disc Mower page.

Farm King sickle bar mower with its cutter bar extended, studio view

Farm King hay tool

Farm King RSB6, RSB7, RSB9 sickle bar mower

Dual-action sickle bar that tilts from 90 degrees up to 45 degrees down for ditches, banks and hills.

6'–9'working width
25–40 hptractor
9 mphworking speed
  • Dual-action cutter bar
  • Tilting bar cuts ditches, embankments and hills
  • Manual or hydraulic lift on RSB6 and RSB7, hydraulic on RSB9
  • Cat. I / II 3-point hitch
Full specifications
ModelsRSB6 / RSB7 / RSB9
Working width6' (180 cm) / 7' (213 cm) / 9' (274 cm)
Lift typeManual/Hydraulic / Hydraulic (RSB9)
Working speed9 mph (15 km/hr)
3-point hitchCat. I / II
Tractor requirements25 hp (19 kW) / 40 hp (30 kW)
Weight583 lb (264 kg) / 634 lb (287 kg) / 711 lb (322 kg)

Source: Farm King Sickle Bar Mower page.

Farm King tedder spread out in work position behind a red compact tractor on a lawn

Farm King hay tool

Farm King RT10, RT17, RT19, RT24 tedders

Mounted and pull-type tedders that spread, aerate and turn forage so it dries evenly before baling.

10'–24'working width
2–6rotors
9 mphworking speed
  • RT10 suits smaller fields; RT24 suits high capacity operations
  • Hydraulic fold and tilt on RT17, RT19 and RT24 (tilt optional on RT17)
  • Tine design works at a steep operating angle
  • Flexible steel tines aerate forage without damage
Full specifications
ModelsRT10 / RT17 / RT19 / RT24
Working width10' (310 cm) / 17' (520 cm) / 19' (570 cm) / 24 (745 cm)
Transport width8' 2" (250 cm) / 9' 2" (280 cm) / 10' 5" (320 cm) / 9' 8" (300 cm)
Working speed9 mph (14 kph)
Rotors2 / 4 / 4 / 6
Arms per rotor6
Weight490 lb (222 kg) / 1,275 lb (578 kg) / 1,400 lb (635 kg) / 1,918 lb (870 kg)

Source: Farm King Tedders page.

Farm King RR420 rotary rake on its tandem wheels on green grass

Farm King hay tool

Farm King RR420 rotary rake

Rotary rake for smaller fields, on a wide-track tandem chassis that follows rough ground.

13.8'working width
11tine arms
6.5'transport width
  • Hydraulic lift and adjustable height
  • Adjustable front cylinder fine-tunes pitch
  • Removable tine arms
  • Sealed oil bath gearbox
Full specifications
ModelsRR420
Working width13.8' (4.2 m)
Transport width6.5' (196 cm)
No. of arms11
Tines per arm4, removable
GearboxSealed oil bath
Tires4, pneumatic 18 x 8.5 x 8
Weight1,411 lb (640 kg)

Source: Farm King Rotary Rake page.

Farm King Enoduo 780 double rotary rake with both rotors folded out, studio view

Farm King hay tool

Farm King Enoduo 780 double rotary rake

Semi-mounted twin-rotor rake for larger fields and 70 to 80 hp tractors.

23'–25.5'working width
11 + 11tine arms
70–80 hptractor
  • Overlapping rake arms leave no material behind
  • Oil bath gearbox, cardan shaft and slip clutch
  • Working width adjusts to suit the baler
  • Opens, closes and adjusts hydraulically from the cab
Full specifications
ModelsEnoduo 780
Working width23'-25.5' (700-780cm)
Transport width8.35' (255cm)
No. of arms11 + 11
No. of tines44 + 44
GearboxOil Bath
Tires4 (18x8.5x8)
Weight3950 lb (1790 kg)

Source: Farm King Double Rotary Rake page.

Farm King bat rake working a windrow behind a tractor, seen from the front

Farm King hay tool

Farm King RB8, RB10, RB12 bat rake

Wheel rake with tool-free ground pressure adjustment and a 32 in high-clearance frame.

16'–24'working width
8–12rake wheels
30 hptractor
  • Independent rake wheel arms with a patented spring system
  • Tool-free ground pressure adjustment by crop
  • Double or single wheel configuration
  • 32 in frame clearance over fluffy windrows
Full specifications
ModelsRB8 / RB10 / RB12
No. of rake wheels8 / 10 / 12
Working width16' - 18' (500 - 560 cm) / 18' - 22' (560 - 660 cm) / 20' - 24' (600 - 740 cm)
Transport width8.2' (250 cm)
Transport length18' (535 cm) / 19' (585 cm) / 22' (665 cm)
Transport height8' (248 cm)
Tractor requirements30 hp (22 kW)
Weight1,573 lb (713 kg) / 1,747 lb (792 kg) / 1,877 lb (851 kg)

Source: Farm King Bat Rake page.

Farm King Easy Rake V-rake opened out on a green field

Farm King hay tool

Farm King Easy Rake RE10, RE12, RE14

Hydraulic V-rake with 10, 12 or 14 rake wheels, each on its own suspension spring.

20' 7"–27' 2"working width
8'transport width
60"rake wheels
  • Independent suspension spring and bounce chain on each wheel
  • Opens and closes hydraulically; each side works on its own
  • Highway-rated 205/70 R15 tires
  • Optional hydraulic center wheel rake
Full specifications
ModelsRE10 / RE12 / RE14
No. of rake wheels10 / 12 / 14
Working width20' 7" (630 cm) / 24' 3" (740 cm) / 27' 2" (830 cm)
Transport width8' (244 cm)
Transport length29' (880 cm) / 31' (940 cm) / 30' (908 cm)
Rake wheels60" (152 cm)
No. of tires4 / 4 / 6
Weight3,250 lb (1474 kg) / 3,450 lb (1565 kg) / 4,320 lb (1960 kg)

Source: Farm King Easy Rake page.

Farm King Easy Rake Superstar folded for transport behind a tractor beside a tree line

Farm King hay tool

Farm King Easy Rake Superstar RS16, RS18, RS20

The maker's largest V-rakes, 32 to 38 ft wide, built for large capacity forage producers.

32'–38'working width
16–20rake wheels
9.2'transport width
  • Individually spring-loaded 60 in rake wheels
  • Tool-free windrow width adjustment
  • Hydraulic opening; each side works on its own
  • Double frame pull bar and heavy main frame
Full specifications
ModelsRS16 / RS18 / RS20
Working width32' (970 cm) / 35' (1060 cm) / 38' (1150 cm)
Transport width9.2' (280 cm)
Transport length34' (1030 cm) / 37' (1120 cm) / 40 (1210 cm)
Rake wheels60" (152 cm)
No. of tires8 / 12 / 12
Weight5,619 lb (2549 kg) / 7,198 lb (3265 kg) / 7,519 lb (3411 kg)

Source: Farm King Easy Rake Superstar page.

Farm King BW150 3-point bale wrapper with film dispenser mast, studio view

Farm King hay tool

Farm King BW150 / BW200 bale wrapper

Round bale wrappers: the BW150 is a static 3-point machine, the BW200 a trailed wrapper with a side loading arm.

47" x 47"bale size
1.3/2 minto wrap
30 HPtractor min. (BW150)
  • Takes 500 or 750 mm plastic film
  • Vertical bale positioning kit standard on all wrappers
  • BW150 is a static machine on the 3-point hitch
  • BW200 has 4 steel pre-stretcher rollers
Full specifications
ModelsBW150 / BW200
Dimensions8.7' x 4.7' x 5.4' (265 x 143 x 166 cm) / 13.6' x 8' x 7.5/8.5' (415 x 245 x 230/260 cm)
Bale dimensions47" x 47" (120 x 120 cm) / 47" x 59" (120 x 150 cm)
Film spool20"/30" (50/75 cm)
Weight992 lb (450 kg) / 2,095 lb (950 kg)

Source: Farm King Bale Wrapper page.

Farm King round bale carrier loaded with round bales behind a red tractor in a hay field

Farm King hay tool

Farm King Round bale carrier 1450, 2400, 2450

Pick, haul and unload round bales with a hand-held control that works with the tractor remotes.

8–164' bales per load
60–100 hptractor
20 mphmax. loaded speed
  • Pusher with two hydraulic motors and high and low settings
  • Graphite coated carrier beams on 1450 and 2450
  • Tilting deck unloads bales in tight end-to-end rows
  • Rotating pickup arm on 1450R and 2450R
  • Short 2400 suits hilly ground
Full specifications
Models1450 / 2400 / 2450
Capacity, 4' balesEight / Ten / Sixteen
Capacity, 5' balesSeven / Eight / Fourteen
GVW18,720 lb (8,491 kg) / 37,440 lb (16,983 kg)
Tractor requirements60 hp (45 kW) / 80 hp (60 kW) / 100 hp (60 kW)
Deck length37' (11.3 m) / 26' (7.9 m) / 37' (11.3 m)
Overall length44' (13.4 m) / 34' (10.4 m) / 45' (13.7 m)
Transport width8.5' (2.6 m) / 12.7' (3.8 m) / 12.75' (3.9 m)
Weight5,495 lb (2,498 kg) / 6,600 lb (2,995 kg) / 9,587 lb (4,348 kg)

Source: Farm King Round Bale Carrier page.

Farm King 4480 XD square bale carrier loaded with square bales behind a John Deere tractor

Farm King hay tool

Farm King 4480 XD square bale carrier

Picks and stacks big square bales, set up and run from a system monitor and hand-held control.

25,000 lbmaximum load
94'x4' bales per load
34'deck length
  • Picks 9 4'x4', 18 3'x4' or 24 3'x3' bales per load
  • Pusher shifts to low automatically on heavy bales
  • Works with open-center, closed-center or load-sensing hydraulics
  • Monitor has auto, calibrate and diagnostic modes
Full specifications
Models4480 XD
Maximum load25,000 lb. (11,300 kg)
Bale length8' (2.4 m)
Deck length34' (10.36 m)
Overall length42' 8" (13 m)
Overall width13' 10" (4.2 m)
Transport width10' 2" (3.1 m)
Weight9,485 lb (4,302 kg)

Source: Farm King Square Bale Carrier page.

Farm King Home Owner finishing mower behind an orange compact tractor mowing beside a shed

Farm King implement

Farm King 430, 530, 630 Home Owner finishing mower

An economical finishing mower for large acreage homesteads, 48 to 72 in wide.

48–72 incutting width
12–30 hptractor
1-½–5-½ incutting height
  • Three high-speed blades with 1-5/8" to 2-5/8" overlap
  • Quick Hitch compatible
  • Independent axle beams for quick part replacement
  • Optional solid rubber tires and chain kit
Full specifications
Models430 / 530 / 630
Width48" / 60" / 72"
Cutting height1-½" to 5-½"
Blade length17-3/4" / 21-3/4" / 25-3/4"
Tractor requirements12 - 25 hp / 15 - 30 hp / 20 - 30 hp
Weight442 lb / 503 lb / 569 lb

Source: Farm King Finishing Mower - Home Owner page.

Farm King Heavy-Duty finishing mower behind an orange compact tractor mowing a lawn beside spruce trees

Farm King implement

Farm King 555, 655, 755 Heavy-Duty finishing mower

Heavy-duty finishing mowers for a groomed cut on rough, uneven ground, 60 to 84 in wide.

60–84 incutting width
15–55 hptractor
3high-speed blades
  • Reinforcing plates under the deck at spindle and axle mounts
  • Hard-surfaced blades and heavy-duty spindles
  • Quick Hitch compatible
  • 1-5/8" to 2-5/8" blade overlap
Full specifications
Models555 / 655 / 755
Width60" / 72" / 84"
Cutting height1-½" to 5-½"
Blade length21-3/4" / 25-3/4" / 29-3/4"
Tractor requirements15 - 55 hp / 20 - 55 hp / 25 - 55 hp
Weight627 lb / 697 lb / 780 lb

Source: Farm King Finishing Mower - Heavy-Duty page.

Farm King rotary cutter behind a blue New Holland tractor cutting grass on a slope

Farm King implement

Farm King Rotary cutter Series I and II

3-point rotary cutters for rough areas where stones, stumps and debris hide in the weeds.

48–84 incutting width
20–75 hptractor
24 instump jumper, Series II
  • 24 in stump jumper standard on Series II
  • Slip clutch on the 72 in and 84 in cutters
  • Shear pin on the Series II 60 in PTO shaft
  • Access panel for blade changes
  • Optional chain kit
Full specifications
Models418 / 518 (Series I); 528 / 628 / 728 (Series II)
Width48" / 60" / 72" / 84"
3-point hitchCat. I / Cat. II (628, 728)
Tractor requirements20 - 45 hp / 25 - 55 hp / 25 - 65 hp / 35 - 65 hp / 45 - 75 hp

Source: Farm King Rotary Cutter page.

Farm King 1530 flex-wing rotary cutter behind a red tractor on a grass strip

Farm King implement

Farm King 1530 flex-wing rotary cutter

15 ft flex-wing cutter for heavy, thick grass and weeds, with a working range of +/- 25 degrees for ditches.

186 inworking width
7 inblade overlap
96"transport width
  • 7 gauge steel decks with a deck protection ring
  • Heat-treated blades and a stump jumper
  • Wheel suspension isolates each wheel assembly
  • 5 year warranty on the gearbox, the maker says
Full specifications
Models1530
Width186 in (4.7 m)
Overall width194 in (4.9 m)
Working range+/- 25°
Cutting height2 to 15 in (51 to 381 mm)
Blade overlap7 in (177 mm)
Blade0.5 x 4, Uplift
Weight5900 lb (2676 kg)

Source: Farm King Flex Wing Rotary Cutter page.

Farm King 820 twin spindle rotary cutter with a flat top deck sitting in grass

Farm King implement

Farm King 820 / 1020 twin spindle rotary cutter

Twin spindle cutters for rough cutting behind a tractor of 40 hp or more, in 3-point, pull type and semi mount versions.

102.5–126.5"width
40–50 HPtractor
2"cutting capacity
  • Slip clutch lets the cutter ride past obstacles
  • 120 and 90 HP gearbox with a 5 year (limited) warranty
  • Flat top deck sheds water and material
  • Replaceable skid shoes, chain guards and stump jumper standard
Full specifications
Models820 (3-Point, Pull Type) / 1020 (3-Point, Trailing, Semi Mount)
Width102.5" / 126.5"
Transport deck height9" / 10" / 18"
3-point hitchCat II 3-Point / Cat II / III 3-Point
Tractor requirements40 HP / 50 HP
Blade0.5 x 4, Reversible / 0.5 x 4 Uplift
Weight1550 lb (820 3-point) / 1640 lb (820 pull type) / 2150 lb (1020 3-point) / 2225 lb (1020 trailing) / 2200 lb (1020 semi mount)

Source: Farm King Twin Spindle Rotary Cutter page.

Red Farm King rotary tiller working a garden bed behind a blue compact tractor

Farm King implement

Farm King Rotary tiller Series 25, 45, 65

3-point tillers for garden and landscaping work, 36 to 77 in wide, for tractors from 12 to 65 hp.

36–77 intilling width
12–65 hptractor
6"sideshift each way
  • Sideshift moves the tiller 6 in left or right on 45 Series and 72 in 65 Series
  • Chain tightener sealed in an oil bath
  • Six tines per flange standard on the 65 Series
  • Parking jack and height-adjustable skid shoes standard
Full specifications
ModelsTL236 / TL245 / TL254 / 4560 / 4572 / 6572 / 6582
Width36" / 45" / 54" / 55" / 69" / 68" / 77"
3-point hitchCategory I
Tractor requirements12 - 18 hp / 14 - 22 hp / 18 - 25 hp / 25 - 40 hp / 30 - 45 hp / 45 - 55 hp / 55 - 65 hp

Source: Farm King Rotary Tiller page.

Farm King box scraper on a blue compact tractor leveling a dirt pad

Farm King implement

Farm King Box scraper 484, 604, 725, 846

Bi-directional box scraper with two 1/2" x 6" back-to-back blades and adjustable scarifier shanks.

48–84"width
6–12 cu. ft.capacity
4"max. working depth
  • Replaceable, reversible back-to-back cutting edge
  • Heat-treated scarifier shanks, easy depth adjustment
  • Works forward and in reverse
Full specifications
Models484 / 604 / 725 / 846
Width48" / 60" / 72" / 84"
Capacity6 cu. ft. / 8 cu. ft. / 10 cu. ft. / 12 cu. ft.
Max working depth4"
3-point hitchCat. 1
Tractor requirements20 - 40 hp / 20 - 45 hp / 25 - 55 hp / 30 - 65 hp
Weight320 lb / 378 lb / 428 lb / 469 lb

Source: Farm King Box Scraper page.

Red Farm King grading scraper with scarifier shanks behind a tractor tire on a gravel lane

Farm King implement

Farm King Grading scraper 60", 72", 84"

A landscaping scraper with beveled reversible blades for a smooth finish and even spreading of gravel.

60–84"working width
18”blade spacing
5.75°blade angle
  • Replaceable heat-treated scarifier shanks
  • Beveled reversible grading blades
  • Quick Hitch compatible
Full specifications
Models60" / 72" / 84"
Width66" / 78" / 90"
Length49"
Height16"
Tractor requirements22 - 55 hp / 25 - 55 hp / 30 - 65 hp
Weight534 lb / 590 lb / 648 lb

Source: Farm King Grading Scraper page.

Farm King landscape rake behind a blue tractor spreading a pile of crushed stone

Farm King implement

Farm King Landscape rake 6030, 7236, 8442, 9648

For seedbed preparation, spreading crushed stone and clearing trash from grass, dirt and gravel.

5'–8'widths
1"tine spacing
20°angle increments
  • Five-position angle adjustment
  • Tines spaced 1 in apart
  • Quick hitch compatible
Full specifications
Models6030 / 7236 / 8442 / 9648
Width60" / 72" / 84" / 96"
Angle increments20°
Tractor requirements20-40 hp / 20-45 hp / 25-55 hp / 30-65 hp
Weight134 lb / 187 lb / 199 lb / 331 lb

Source: Farm King Landscape Rake page.

Farm King disc working a garden plot behind a blue compact tractor near spruce trees

Farm King implement

Farm King Disc 506, 605, 705, 805

Discs for seedbed preparation in crusty, hard-packed soil, 5-1/2 to 8-1/2 ft wide.

5-1/2'–8-1/2'width
16–28discs
20–65 hptractor
  • 2 x 3 in tubing frame
  • Dual gangs with 5 adjustment points
  • Self-aligning bearings follow the ground
  • Notched front and plain or notched rear
  • Quick hitch compatible
Full specifications
Models506 / 605 / 705 / 805
Width5-1/2' / 6-1/2' / 7-1/2' / 8-1/2'
Discs16 / 20 / 24 / 28
Disc diameter18" / 20"
Tractor requirements20 - 40 hp / 25 - 50 hp / 30 - 60 hp / 30 - 65 hp
Weight649 lb / 732 lb / 899 lb / 1084 lb

Source: Farm King Disc page.

Farm King post hole digger boom with a single flight auger, studio view

Farm King implement

Farm King Post hole digger 150, 160, 205, 210

Post hole diggers for the 3-point hitch or a skid steer mount, with one or two flight augers.

6"–30"auger sizes
2"output shaft
350-500 lboptional down force
  • Heavy-duty tubular steel yoke and booms
  • 3-position boom on models 150, 160 and 205
  • Shear-bolt protected, shielded PTO driveline
  • Five year limited warranty on most gearbox components, the maker says
Full specifications
Models150 / 160 / 205 / 210
Main frame- / 3" / 3-1/2" / 3-1/2"
Gear ratio3:1 / 3:1 / 3:18:1 / 4.1:1
Boom position3 / 3 / 3 / 1
Weight149 lb / 160 lb / 206 lb / 210 lb

Source: Farm King Post-Hole Digger page.

Farm King 2400 trailered post driver loaded with wooden posts behind a tractor in a field

Farm King implement

Farm King Post driver 1450 / 2400

A 3-point or skid steer post driver, and a trailered model with PTO or 9 hp engine power.

100,000 lbimpact at full stroke
310 lbhammer weight, empty
62"max. hammer stroke
  • Self-contained hydraulic system with full hydraulic controls
  • 1450: Cat. I and II 3-point hitch, optional skid steer frame
  • 2400: hammer ballast box, rear stand and 2" ball hitch option
  • Optional post guide; mast extension option on the 2400
Full specifications
Models1450 (3-point) / 2400 (trailer)
Mast12" (305 mm) wide track
Hammer weight310 lb (141 kg) (1450) / 310 lb (141 kg) empty, up to 700 lb (318 kg) ballasted (2400)
Impact at full stroke100,000 lb (45,360 kg)
Max hammer heightStandard lift 105" (2.67 m) (1450) / Standard lift 105" (2.67 m), 128" (3.25 m) (2400)
Max hammer stroke62" (1570 mm)
Weight1135 lb (515 kg) (1450) / PTO: 1190 lb (540 kg), Engine: 1300 lb (590 kg) (2400)

Source: Farm King Post Driver page.

Farm King 3-point Quick Hitch frame with hooks and lock handles, studio view

Farm King implement

Farm King Quick Hitch

Leave it on the 3-point hitch, back up to the implement and lift: no lining up pins or setting sway links each time.

I, II, IIIcategories
76–185 lbweight
  • Sway links are set once and left alone
  • Fits mowers, tillers, rear blades, box scrapers, cultivators and rakes
  • Category I, II, III and II/III
Full specifications
ModelsCategory I / II / III / II/III
Inside hooks27-1/4 / 32-3/4 / 38-1/4 / 38-1/4
Outside hooks29-1/2 / 36-1/4 / 42-3/4 / 42-3/4
Weight76 lb / 134 lb / 182 lb / 185 lb

Source: Farm King Quick Hitch page.

Farm King BackSaver auger with steel trussing raised to a row of grain bins, hitched to a tractor

Farm King grain handling

Farm King BackSaver auger 10", 13", 16"

Swing-away grain augers on a scissor lift undercarriage, 50 to 124 ft long.

50'–124'lengths
10 / 13 / 16"tube diameter
60–300 HPminimum HP
  • Scissor lift undercarriage on all models
  • Self-leveling swing-away hopper
  • Reverser kits and top thrust bearings standard
  • Steel trussing on 13114 and 16124
  • Maximum transport height of 15'
Full specifications
Models1050 / 1060 / 1070 / 1080 / 1370 / 1385 / 1395 / 13114 / 1684 / 16104 / 16124
Tube diameter10” / 13” / 16”
Tube thickness12 Ga / 10 Ga. &11 Ga
Flighting7 Ga / 1/4”
Hopper dimensions43.5” x 60” x 14.25”/11.75” / 43.5” x 60” x 16.25”/13” / 48” x 60” x 15.5”
Minimum HP60 HP / 65 HP / 70 HP / 75 HP / 95 HP / 110 HP / 120 HP / 170 HP / 170 HP / 190 HP / 300 HP
Approx. weight2545 lbs / 2987 lbs / 3354 lbs / 3622 lbs / 5175 lbs / 6381 lbs / 6683 lbs / 15,500 lbs / 11,000 lbs / 13,000 lbs / 23,500 lbs
Capacity, corn (estimate)6300 / 11,400 / 14,200 / 14,800 bu/hr

Source: Farm King Auger Guide 2025, BackSaver page.

Farm King TeleSwing hopper and intake tube swung out from a BackSaver auger beside grain bins

Farm King grain handling

Farm King TeleSwing 13"

A telescoping swing hopper option for BackSaver augers that reaches under trucks and fully retracts.

17'tube length
~11000 bu/hrcapacity
540 or 1000PTO options
  • Telescopic intake tube for maximum clearance
  • Posi-Track dual wheel drive mover
  • Low profile hopper with hydraulic winch
  • Retrofits 2014 and newer BackSaver augers
Full specifications
Models13" TeleSwing
Tube diameter13"
Tube length17'
Tubing gauge12 gauge
PTO options540 or 1000
Hopper dimensions52" x 45" x 9.25H
Capacity~11000 bu/hr

Source: Farm King TeleSwing page.

Farm King CX2 conventional auger with poly hopper set up beside a grain bin

Farm King grain handling

Farm King CX2 conventional auger

Conventional augers 41, 51 and 61 ft long in 8 in and 10 in tubes, with a 24 in double flighting intake.

41'–61'lengths
8 / 10"tube diameter
20–38minimum HP
  • 24 in double flighting intake
  • Level engine mount keeps belt tension at every auger position
  • Wooden self-lubricating bearings
  • Pedestal style control panel
  • Warranty covers 1st year parts and labour and 2nd year parts only, the maker says
Full specifications
ModelsCX2-841 / CX2-851 / CX2-861 / CX2-1041 / CX2-1051 / CX2-1061
Tube diameter8” / 10”
Tube length41’ / 51’ / 61’
Flighting shaft1-1/4” / 2-3/8”
Minimum HP20 / 25 / 25 / 28 / 32 / 38
Approx. weight1382 lbs / 1723 lbs / 2085 lbs / 1748 lbs / 2080 lbs / 2617 lbs
Capacity, corn (estimate)3500 / 5550 bu/hr

Source: Farm King Auger Guide 2025, Conventional page.

Farm King conventional auger raised to the top of a grain bin beside a red barn

Farm King grain handling

Farm King Conventional auger / truck loader

8, 10 and 13 in conventional augers with a gearbox placed to reach deeper into the bin.

31' / 36'tube length
8 / 10 / 13"tube diameter
  • Left- or right-side drive gearbox
  • Optional reverse shift gearbox
  • Top drive in a sealed oil bath with chain tightener
  • Self-leveling motor mount on belt-drive engine models
  • Safety clutch winches included
Full specifications
Models831 / 836 / 1031 / 1036 / 1336
Tube diameter8" / 10" / 13"
Tube length31' / 36'
Wheel track6' 0" / 6' 6" / 7' 5"
Belt drivesDouble / Triple
Flighting10 gauge / 7 gauge / 1/4"
Flighting shaft1-1/4" / 2-3/8"
Drive line1-1/4" / 1-3/8" / 1-1/2"

Source: Farm King Conventional Auger / Truck Loader page.

Four Farm King utility augers of different lengths on a display rack, studio view

Farm King grain handling

Farm King Utility auger 4", 6", 8"

Electric utility augers, 11 to 23 ft long, in 4, 6 and 8 in tube widths.

11'–23'lengths
4 / 6 / 8"tube diameter
0.5-10recommended HP
  • Spider cage over the intake flighting
  • Belt guards standard; optional shut-off valve
  • Box clamp for bin mounting on 4 in and 6 in models
  • Adjustable motor mounts fit various motors
Full specifications
ModelsY411 / Y416 / Y421 / Y611 / Y616 / Y621 / Y811 / Y816 / Y823
Tube diameter4" / 6" / 8"
Tube length11' / 16' / 21' / 23'
Flighting12 Ga. / 10 Ga.
Tube thickness16 Ga. / 14 Ga.
Drive typeElectric
Recommended HP0.5-1 / 1-4 / 3-10

Source: Farm King Auger Guide 2025, Utility & Unloading Augers page.

Farm King 10 inch unloading auger with low hopper and transport wheels, studio view

Farm King grain handling

Farm King Unloading auger 1010H / 1010E

A 10 in auger whose hopper fits under hopper bottom bins and hopper trailers for fast unloading.

10"tube diameter
9'tube length
  • Hydraulic drive with variable speed, or electric drive
  • Adjustable discharge height
  • Hinged cleanout gate in the hopper
  • Rubber edging around the hopper
Full specifications
Models1010H / 1010E
Tube diameter10"
Tube length9'
Drive typeHydraulic / Electric
Auger tubing16 gauge
Flighting12 gauge
Approx. weight310 lb / 320 lb

Source: Farm King Unloading Auger page.

Farm King grain cleaner with screened drum and intake auger beside grain bins

Farm King grain handling

Farm King Grain cleaner 362 / 482

Drum grain cleaners that take dockage out before grain is shipped or stored.

700 / 1900bu/hr
36 / 48"drum diameter
  • Two-stage screening: inner cone screen and outer drum screen
  • Built-in chute for cleaned grain
  • Trash pan standard on the 482
  • Optional 6 in intake auger on the 362
Full specifications
Models362 / 482
Drum diameter36" / 48"
Drum length73" / 98"
Total length97" / 176.7"
Width (outside of tires)55" / 76"
Capacity700 bu/hr / 1900 bu/hr
Approx. weight493 lb / 1408 lb

Source: Farm King Grain Cleaner page.

Allied HD hydraulic snowblower on a Bobcat skid steer throwing snow

Allied by Farm King

Allied HD Hydraulic Snowblower

Skid steer snowblowers in high and standard flow versions, 60 to 84 in wide.

60–84"cutting width
17–40 GPMhydraulic flow
270°hood turning range
  • Hydraulic motors mounted directly on the fan and auger shafts
  • Hydraulic relief instead of shear pins
  • Wiring harness for Bobcat, ASV, Cat, Case / New Holland and John Deere
  • Magnetic cab-mounted control box for other models
Full specifications
Models6025 / 7225 / 7235 / 8425 / 8435
Width60" / 72" / 84"
Cutting height25" / 35"
Hydraulic requirements17 - 23 GPM / 23 - 40 GPM
Weight828 lb / 923 lb / 1084 lb / 951 lb / 1108 lb

Source: Allied HD Hydraulic Snowblower page.

Allied Triplex finishing mower with three red decks behind an orange compact tractor

Allied by Farm King

Allied Triplex finishing mower

Three finishing mower decks on one frame, each floating on its own, for high-volume grass cutting.

11.2'–16.7'cutting width
35–45 hprecommended
9blades
  • Each deck floats independently over rolling ground
  • Decks lift hydraulically and lock for transport
  • Front UHMW roller prevents scalping
  • Cast clevis hitch, optional 2-5/16 in ball hitch
Full specifications
ModelsTRX11 / TRX13 / TRX16
Width11.2' / 13.6' / 16.7'
Transportation width84"/90" / 86"/100" / 86"/102"
Transportation height/length80"/13' / 84.5"/15'9" / 103"/16'3"
Tractor requirements35 hp / 40 hp / 45 hp
Weight3347 lb / 3919 lb / 4349 lb

Source: Allied Triplex Finishing Mower page.

Allied 45 Series rear blade with 3-point hitch frame, studio view

Allied by Farm King

Allied Rear blade Series 30–155

Six series of 3-point rear blades for tractors from 15 to 150 hp, 4 to 12 ft wide.

15–150 HPtractor
4'–12'widths
5-positionangle forward and reverse
  • Reversible and replaceable cutting edge
  • 45 Series tilts up to 15° and offsets up to 12"
  • Hydraulic angle, offset and tilt on Series 100 and 155
  • Quick hitch compatible; parking stand standard
Full specifications
ModelsSeries 30 / 45 / 60 / 80 / 100 / 155
Tractor requirements15-30 HP / 20-45 HP / 30-60 HP / 80 HP / 100 HP / 150 HP
Width4', 5', 6' / 5', 6', 7' / 7', 8' / 7', 8', 9' / 8', 9' / 8', 9', 10', 12'
3-point hitchCat. I / Cat. I / Cat. II, I optional / Cat. II / Cat. II and III / Cat. II and III
Angle30° left or right / 40° left or right
Angle - forward and reverse5-position

Source: Allied Rear Blade page.

Allied rotary sweep with a blue 32 inch brush and skid steer mount, studio view

Allied by Farm King

Allied Rotary sweep

Rotary brooms with 32 in brushes, PTO driven on a 3-point mount or hydraulic on a skid steer.

60–84"sweeping width
32"brush diameter
30°broom angle each way
  • Clears dirt, gravel, snow and leaves from lots, drives and walks
  • Double gearbox drive reverses brush rotation (3-point)
  • Variable flow control valve (skid steer)
  • Step-through mount for skid steers
Full specifications
Models6032P / 6032W / 7232P / 7232W / 8432P / 8432W
Width69" / 81" / 93"
Sweeping width60" / 72" / 84"
Brush diameter32"
Weight640 lb / 740 lb / 840 lb

Source: Allied Rotary Sweep page.

Allied stump grinder cutting wheel grinding a stump down to chips

Allied by Farm King

Allied Stump grinder 2628 / 3633

3-point stump grinders with a 45 degree swing arc, controlled from the tractor levers.

33 / 42teeth
45°swing arc
18"cut height above ground
  • Carbide-tipped cutting teeth are easy to replace
  • Slip clutch on 3-point models
  • Stabilizer bar and parking stand
  • Pressure relief valve sets the cutting feed rate
Full specifications
Models2628 / 3633
3-point hitchCat.I / Cat.I/II
Cut height (above / below ground)18/10 / 18/15
Number of teeth33 / 42
Weight660 lb / 880 lb

Source: Allied Stump Grinder page.

Farm King snowblowers at a glance

ModelSnowblower 500–840Snowblower 960–1200Pull Type Snowblower 740 / 840
Models500 / 600 / 660 / 740 / 840 / 840G960 / 1080 / 1200740 / 840
Cutting width50" / 60" / 66" / 74" / 84"96" / 108" / 120"74" / 84"
Cutting height24" / 25"36" / 41"30"
Hitch categoryCat. I standard / Cat. I & II std (840, 840G)Cat. II std / Cat. II & III stdCAT. II
Tractor requirement15 - 30 hp / 20 - 40 hp / 22 - 40 hp / 40 - 70 hp / 60 - 90 hp90 - 125 hp / 120 - 180 hp / 180 - 225 hp40-70 hp / 60-90 hp
Weight422 lb / 470 lb / 515 lb / 756 lb / 848 lb / 878 lb1243 lb / 2398 lb / 2600 lb765 lb / 995 lb

Farm King hay tools at a glance

ModelMDN 4, 5, 6, 7 disc mowerPendolare 245, 285, 320 disc mowerRSB6, RSB7, RSB9 sickle bar mowerRT10, RT17, RT19, RT24 teddersRR420 rotary rakeEnoduo 780 double rotary rakeRB8, RB10, RB12 bat rakeEasy Rake RE10, RE12, RE14Easy Rake Superstar RS16, RS18, RS20BW150 / BW200 bale wrapperRound bale carrier 1450, 2400, 24504480 XD square bale carrier
ModelsMDN4 / MDN5 / MDN6 / MDN7245 / 285 / 320RSB6 / RSB7 / RSB9RT10 / RT17 / RT19 / RT24RR420Enoduo 780RB8 / RB10 / RB12RE10 / RE12 / RE14RS16 / RS18 / RS20BW150 / BW2001450 / 2400 / 24504480 XD
Working width5' 5" (1.65 m) / 7' (2.10 m) / 8' 1" (2.45 m) / 9' 4" (2.85 m)8' (2.4 m) / 9' 4" (2.87 m) / 10' 8" (3.29 m)6' (180 cm) / 7' (213 cm) / 9' (274 cm)10' (310 cm) / 17' (520 cm) / 19' (570 cm) / 24 (745 cm)13.8' (4.2 m)23'-25.5' (700-780cm)16' - 18' (500 - 560 cm) / 18' - 22' (560 - 660 cm) / 20' - 24' (600 - 740 cm)20' 7" (630 cm) / 24' 3" (740 cm) / 27' 2" (830 cm)32' (970 cm) / 35' (1060 cm) / 38' (1150 cm)–––
Transport width–––8' 2" (250 cm) / 9' 2" (280 cm) / 10' 5" (320 cm) / 9' 8" (300 cm)6.5' (196 cm)8.35' (255cm)8.2' (250 cm)8' (244 cm)9.2' (280 cm)–8.5' (2.6 m) / 12.7' (3.8 m) / 12.75' (3.9 m)10' 2" (3.1 m)
Tractor requirements35 hp (25 kW) / 40 hp (30 kW) / 45 hp (33 kW) / 50 hp (37 kW)65 hp / 75 hp / 80 hp25 hp (19 kW) / 40 hp (30 kW)–––30 hp (22 kW)–––60 hp (45 kW) / 80 hp (60 kW) / 100 hp (60 kW)–
Weight903 lb (410 kg) / 992 lb (450 kg) / 1,058 lb (480 kg) / 1,124 lb (510 kg)1,370 lb (621 kg) / 1,525 lb (692 kg) / 1,675 lb (760 kg)583 lb (264 kg) / 634 lb (287 kg) / 711 lb (322 kg)490 lb (222 kg) / 1,275 lb (578 kg) / 1,400 lb (635 kg) / 1,918 lb (870 kg)1,411 lb (640 kg)3950 lb (1790 kg)1,573 lb (713 kg) / 1,747 lb (792 kg) / 1,877 lb (851 kg)3,250 lb (1474 kg) / 3,450 lb (1565 kg) / 4,320 lb (1960 kg)5,619 lb (2549 kg) / 7,198 lb (3265 kg) / 7,519 lb (3411 kg)992 lb (450 kg) / 2,095 lb (950 kg)5,495 lb (2,498 kg) / 6,600 lb (2,995 kg) / 9,587 lb (4,348 kg)9,485 lb (4,302 kg)

Mowers, cutters and 3-point implements at a glance

Model430, 530, 630 Home Owner finishing mower555, 655, 755 Heavy-Duty finishing mowerRotary cutter Series I and II1530 flex-wing rotary cutter820 / 1020 twin spindle rotary cutterRotary tiller Series 25, 45, 65Box scraper 484, 604, 725, 846Grading scraper 60", 72", 84"Landscape rake 6030, 7236, 8442, 9648Disc 506, 605, 705, 805Post hole digger 150, 160, 205, 210Post driver 1450 / 2400Quick Hitch
Models430 / 530 / 630555 / 655 / 755418 / 518 (Series I); 528 / 628 / 728 (Series II)1530820 (3-Point, Pull Type) / 1020 (3-Point, Trailing, Semi Mount)TL236 / TL245 / TL254 / 4560 / 4572 / 6572 / 6582484 / 604 / 725 / 84660" / 72" / 84"6030 / 7236 / 8442 / 9648506 / 605 / 705 / 805150 / 160 / 205 / 2101450 (3-point) / 2400 (trailer)Category I / II / III / II/III
Width48" / 60" / 72"60" / 72" / 84"48" / 60" / 72" / 84"186 in (4.7 m)102.5" / 126.5"36" / 45" / 54" / 55" / 69" / 68" / 77"48" / 60" / 72" / 84"66" / 78" / 90"60" / 72" / 84" / 96"5-1/2' / 6-1/2' / 7-1/2' / 8-1/2'–––
3-point hitch––Cat. I / Cat. II (628, 728)–Cat II 3-Point / Cat II / III 3-PointCategory ICat. 1––––––
Tractor requirements12 - 25 hp / 15 - 30 hp / 20 - 30 hp15 - 55 hp / 20 - 55 hp / 25 - 55 hp20 - 45 hp / 25 - 55 hp / 25 - 65 hp / 35 - 65 hp / 45 - 75 hp–40 HP / 50 HP12 - 18 hp / 14 - 22 hp / 18 - 25 hp / 25 - 40 hp / 30 - 45 hp / 45 - 55 hp / 55 - 65 hp20 - 40 hp / 20 - 45 hp / 25 - 55 hp / 30 - 65 hp22 - 55 hp / 25 - 55 hp / 30 - 65 hp20-40 hp / 20-45 hp / 25-55 hp / 30-65 hp20 - 40 hp / 25 - 50 hp / 30 - 60 hp / 30 - 65 hp–––
Weight442 lb / 503 lb / 569 lb627 lb / 697 lb / 780 lb–5900 lb (2676 kg)1550 lb (820 3-point) / 1640 lb (820 pull type) / 2150 lb (1020 3-point) / 2225 lb (1020 trailing) / 2200 lb (1020 semi mount)–320 lb / 378 lb / 428 lb / 469 lb534 lb / 590 lb / 648 lb134 lb / 187 lb / 199 lb / 331 lb649 lb / 732 lb / 899 lb / 1084 lb149 lb / 160 lb / 206 lb / 210 lb1135 lb (515 kg) (1450) / PTO: 1190 lb (540 kg), Engine: 1300 lb (590 kg) (2400)76 lb / 134 lb / 182 lb / 185 lb

Farm King augers and grain handling at a glance

ModelBackSaver auger 10", 13", 16"TeleSwing 13"CX2 conventional augerConventional auger / truck loaderUtility auger 4", 6", 8"Unloading auger 1010H / 1010EGrain cleaner 362 / 482
Models1050 / 1060 / 1070 / 1080 / 1370 / 1385 / 1395 / 13114 / 1684 / 16104 / 1612413" TeleSwingCX2-841 / CX2-851 / CX2-861 / CX2-1041 / CX2-1051 / CX2-1061831 / 836 / 1031 / 1036 / 1336Y411 / Y416 / Y421 / Y611 / Y616 / Y621 / Y811 / Y816 / Y8231010H / 1010E362 / 482
Tube diameter10” / 13” / 16”13"8” / 10”8" / 10" / 13"4" / 6" / 8"10"–
Tube length–17'41’ / 51’ / 61’31' / 36'11' / 16' / 21' / 23'9'–
Minimum HP60 HP / 65 HP / 70 HP / 75 HP / 95 HP / 110 HP / 120 HP / 170 HP / 170 HP / 190 HP / 300 HP–20 / 25 / 25 / 28 / 32 / 38––––
Approx. weight2545 lbs / 2987 lbs / 3354 lbs / 3622 lbs / 5175 lbs / 6381 lbs / 6683 lbs / 15,500 lbs / 11,000 lbs / 13,000 lbs / 23,500 lbs–1382 lbs / 1723 lbs / 2085 lbs / 1748 lbs / 2080 lbs / 2617 lbs––310 lb / 320 lb493 lb / 1408 lb

Allied by Farm King commercial equipment at a glance

ModelHD Hydraulic SnowblowerTriplex finishing mowerRear blade Series 30–155Rotary sweepStump grinder 2628 / 3633
Models6025 / 7225 / 7235 / 8425 / 8435TRX11 / TRX13 / TRX16Series 30 / 45 / 60 / 80 / 100 / 1556032P / 6032W / 7232P / 7232W / 8432P / 8432W2628 / 3633
Width60" / 72" / 84"11.2' / 13.6' / 16.7'4', 5', 6' / 5', 6', 7' / 7', 8' / 7', 8', 9' / 8', 9' / 8', 9', 10', 12'69" / 81" / 93"–
Tractor requirements–35 hp / 40 hp / 45 hp15-30 HP / 20-45 HP / 30-60 HP / 80 HP / 100 HP / 150 HP––
Weight828 lb / 923 lb / 1084 lb / 951 lb / 1108 lb3347 lb / 3919 lb / 4349 lb–640 lb / 740 lb / 840 lb660 lb / 880 lb

Genuine Farm King parts

Farm King posts operator and parts manuals for each machine on its website, many going back to 2003. The maker keeps warehouses across the United States and Canada for setup and parts distribution. Clinton Tractor's parts counter orders genuine Farm King parts; bring the model and serial number.

  • Skid shoes
  • Cutting edges
  • Shear bolts
  • Spout rotators
  • Finishing mower blades
  • Rotary cutter blades
  • Gearboxes
  • Disc mower blades
  • Rake and tedder tines
  • Auger flighting
  • Scarifier shanks
  • Chain guards
Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

Built in Morden, Manitoba

Farm King products are manufactured in Morden, Manitoba, Canada, and sold through over 1,200 North American dealer locations.

What the maker says

Farm King products are manufactured in Morden, Manitoba, Canada. Farm King has numerous warehouses across the United States and Canada for product setup and parts distribution. The dealer network of over 1,200 North American locations provides first class service and professional expertise to farmers and customers.

Warranty terms the maker lists

Several Farm King product pages list gearbox or auger warranty terms. Ask for the warranty sheet for the machine you are looking at.

Quoted from the product pages

15' flex-wing rotary cutter 1530: "There is a 5 year warranty on the gearbox."

Twin spindle rotary cutters 820 and 1020: "the cutter has a 5 year (limited) warranty".

Post hole diggers: "Each model also comes with a five year limited warranty on most gearbox components."

CX2 conventional augers: "Warranty covers 1st year parts & labour and 2nd year parts only".

Options

Farm King lists these options and add-ons on its product pages. Not every option fits every machine, so ask which ones suit the model you are looking at.

Also available

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday
Get directions(315) 853-6151

Driving distance

  • New Hartford 6 mi
  • Utica 9 mi
  • Rome 14 mi
  • Oneida 17 mi
  • Hamilton 20 mi
  • Herkimer 26 mi
  • Cazenovia 31 mi
  • Norwich 42 mi
  • Cooperstown 47 mi
  • Syracuse 49 mi
  • Oneonta 60 mi
  • Cortland 61 mi

Before you visit

Can I see Farm King implements in person?

Call (315) 853-6151 before you drive over and ask which Farm King implements we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.