(315) 853-6151
E-Z Trench Bedscaper bed edger with a red Honda engine being pushed along a lawn edge

E-Z Trench Trencher and Bed Edger Dealer in Central New York

E-Z Trench of South Loris, South Carolina has built walk-behind trenchers since 1982. The line covers Groundsaw trenchers, the Bedscaper bed edger and EZ-Cable Installers. Clinton Tractor in Clinton, NY is an E-Z Trench dealer.

Call (315) 853-6151 Compare models

Groundsaw trenchers

The Groundsaw series cuts a trench 2.5 in. wide and 0 to 13 in. deep. The maker builds it for irrigation contractors, rental stores and propane gas dealers. Pick the EZ9000 for general soils or the EZ9100 for rocky ground.

EZ-Cable Installers

The EZ-Cable Installer digs a trench, lays the wire or cable and covers it in one pass. The maker lists it for low voltage lighting and hidden pet fence. It is offered in two depths.

Bedscaper bed edger

The Bedscaper defines flower beds and tree rings with zero-turn steering. The maker says it is the only zero-turn steering bed edger on the market.

E-Z Trench history

E-Z Trench has made trenching products for commercial use since 1982. It describes its equipment as family owned and U.S. made.

The owner, Gail, and her sons Monty and Scotty are involved in all facets of the business. E-Z Trench is based in South Loris, South Carolina.

  1. 1982E-Z Trench begins making walk-behind trenchers.
  2. 1985The maker dates its EZ-Cable Installer, the original wire and cable installing mini trencher, to this year.

Compare E-Z Trench trenchers

Search all 5 E-Z Trench machines by line, name or feature. Spec tables are copied from each E-Z Trench model page.

Showing all 5 models

E-Z Trench Groundsaw trencher with red cutting-wheel guard, blue frame and rear transport wheels, front left three-quarter view

Groundsaw trencher

E-Z Trench Groundsaw EZ9000

Faster blade speed and more horsepower; the maker says it handles 3 in. rock and smaller.

13in. max trench depth
2.5in. trench width
8hpHonda GX engine
250lbsweight
  • Replaceable carbide cutting bits
  • Heavy duty steel cutting wheel
  • Maintains low center of gravity
  • On-the-go depth adjustment, 0 to 13 in.
  • Fits inside standard fence and garden gates
  • Belt and pulley drive
Full specifications
Weight250lbs
Dimensions60"L x 30"W x 35"H (includes handlebar)
EngineHonda GX Series (8hp) or Kohler Command Pro Engines (9hp)
DriveBelt & Pulley system
Trench size2.5" W ; 0-13" D

Source: E-Z Trench Groundsaw EZ9000 page.

E-Z Trench Groundsaw trencher with red cutting-wheel guard and blue frame, side view on rear wheels

Groundsaw trencher

E-Z Trench Groundsaw EZ9100

Slower blade speed for rocky soil and heavy rental use, with an oil-bathed centrifugal clutch.

13in. max trench depth
2.5in. trench width
6hpHonda GX engine
250lbsweight
  • Centrifugal wet clutch drive with 2:1 reduction
  • Carbide bits cut through tree roots and hard soils
  • Suited to rocky soil and rental store duty
  • On-the-go depth adjustment, 0 to 13 in.
  • Fits inside standard fence and garden gates
Full specifications
Weight250lbs
Dimensions60"L x 30"W x 35"H (includes handlebar)
EngineHonda GX Series (6hp)
DriveWet Clutch System w/ 2:1 Reduction
Trench size2.5" W ; 0-13" D

Source: E-Z Trench Groundsaw EZ9100 page.

E-Z Trench EZ-Cable Installer with blue handle, red Honda engine and wire reel, front left three-quarter view

Wire and cable installer

E-Z Trench EZ-Cable Installer TP400CL3

Zero-turn wire and cable installer that installs to a max depth of 3.5 in.

3.5in. max install depth
165lbsweight
  • Zero-turn steering
  • Handle folds for storage
  • Handle mounted throttle controls
  • Accessories convert it to a Bedscaper bed edger
Full specifications
Weight165lbs
Dimensions48"L x 28"W x 35"H (includes handlebar)
EngineHonda GX Series
DriveWet Clutch System
Installs to3.5" max depth

Source: E-Z Trench Cable Installers page (model page lists the same engine, drive and weight).

E-Z Trench EZ-Cable Installer with blue handle, red Honda engine and wire reel, front left three-quarter view

Wire and cable installer

E-Z Trench EZ-Cable Installer TP400CL7

The deeper model: installs wire 7 in. deep, adjustable to 5 in. and 6 in. on the fly.

7in. max install depth
165lbsweight
  • Installs wire and backfills while digging
  • Depth adjusts to 5 in. and 6 in. on the fly
  • Zero-turn steering
  • Handle folds for storage
  • Handle mounted throttle controls
Full specifications
Weight165lbs
Dimensions48"L x 28"W x 35"H (includes handlebar)
EngineHonda GX Series
DriveWet Clutch System
Installs to7" max depth - adjustable to 5" & 6" on the fly

Source: E-Z Trench Cable Installers page (model page lists the same engine, drive and weight).

E-Z Trench Bedscaper bed edger with blue frame, red Honda engine and red blade guard, front left three-quarter view

Landscape bed edger

E-Z Trench Bedscaper BE400

Bed edger with an oil-bathed centrifugal clutch and depth control at the handles; it can also trench 7 in. deep.

7in. trench depth
165lbsweight
  • Zero-turn steering
  • Patented vibration reducing rotor
  • Handle mounted throttle and depth controls
  • On-the-fly edge height of 2, 3 or 4 in.
  • Converts with accessories for trenching or wire burial
Full specifications
Weight165lbs
Dimensions48"L x 28"W x 35"H (includes handlebar)
EngineHonda GX Series
DriveWet Clutch System

Source: E-Z Trench Bedscaper BE400 page (edge height from the Landscape Edgers page).

Groundsaw trenchers at a glance

ModelGroundsaw EZ9000Groundsaw EZ9100
Weight250lbs250lbs
Dimensions60"L x 30"W x 35"H (includes handlebar)60"L x 30"W x 35"H (includes handlebar)
EngineHonda GX Series (8hp) or Kohler Command Pro Engines (9hp)Honda GX Series (6hp)
DriveBelt & Pulley systemWet Clutch System w/ 2:1 Reduction
Trench size2.5" W ; 0-13" D2.5" W ; 0-13" D

EZ-Cable Installers at a glance

ModelEZ-Cable Installer TP400CL3EZ-Cable Installer TP400CL7
Weight165lbs165lbs
Dimensions48"L x 28"W x 35"H (includes handlebar)48"L x 28"W x 35"H (includes handlebar)
EngineHonda GX SeriesHonda GX Series
DriveWet Clutch SystemWet Clutch System
Installs to3.5" max depth7" max depth - adjustable to 5" & 6" on the fly

E-Z Trench parts and manuals

E-Z Trench sells replacement parts through the parts page on eztrench.com and posts an owner's manual for each Groundsaw, Bedscaper and cable installer model. Ask the Clinton Tractor parts counter for E-Z Trench parts and have your model name ready.

  • Carbide bits
  • Drive belts
  • Bearings
  • Throttle cables
  • Depth adjustment cables
  • Blades
  • Pulleys
  • Sprockets
  • Transfer case parts
  • Wheels and tires
  • Gearbox rebuild bundle
Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

Family owned, U.S. made

E-Z Trench says its equipment is family owned and U.S. made. Its office is in South Loris, South Carolina.

About the maker

E-Z Trench Mfg. Inc. lists its office at 2315 Hwy 701, South Loris, SC 29569.

The maker says its owner, Gail, and her sons Monty and Scotty are involved in all facets of the business.

E-Z Trench posts how-to-operate videos for the TP400CL3, BE400 and EZ9100.

Blades and accessories

E-Z Trench lists these Bedscaper accessories. Check the E-Z Trench accessories page for which blade fits your model.

Also available

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday
Get directions(315) 853-6151

Driving distance

  • New Hartford 6 mi
  • Utica 9 mi
  • Rome 14 mi
  • Oneida 17 mi
  • Hamilton 20 mi
  • Herkimer 26 mi
  • Cazenovia 31 mi
  • Norwich 42 mi
  • Cooperstown 47 mi
  • Syracuse 49 mi
  • Oneonta 60 mi
  • Cortland 61 mi

Before you visit

Can I see E-Z Trench trenchers in person?

Call (315) 853-6151 before you drive over and ask which E-Z Trench trenchers we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.