(315) 853-6151
Danuser Hornet post drivers on a mini excavator and a skid steer, each holding a post upright in a field

Danuser Post Driver and Auger Dealer in Central New York

Danuser Machine Company of Fulton, Missouri builds post drivers, hydraulic auger drives, tree pullers, mixing buckets and pallet forks for skid steers and tractors. Clinton Tractor in Clinton, NY is a Danuser dealer.

Call (315) 853-6151 Compare models

Post drivers and fence wire tools

Danuser says it is the driving force behind a good fence. Choose a Hammer, Hornet or T3 driver by post size, then add a Python winder or unroller for the wire.

EP hydraulic auger drives

The EP Series pairs a Danuser-built planetary with a motor rated up to 3,500 PSI. Four drive units cover flows from 6 to 35 GPM.

Auger bits and stump auger

Danuser offers bits for industrial drives and for hydraulic and PTO diggers, and a stump auger that planes stumps away on a 2 in. hex drive.

Mixing and material handling buckets

From concrete to livestock feed, these buckets mix, move and dispense material from a skid steer or mini track loader.

Pallet forks, grapple and land clearing

Pallet forks come for skid-steer, John Deere and Euro/Global quick attach loaders. The grapple, tree puller and concrete breaker add land clearing and demolition work.

Danuser history

Danuser Machine Company grew out of a family blacksmith and repair shop. The Danuser family moved to Fulton in 1910, and the original shop sat on the site of its present plant.

The company is now in its fourth generation of family ownership, with Glenn and Janea Danuser as co-owners. Its motto is "Good enough won't do - it must be right."

  1. 1941Danuser builds the first rear-mounted Blade in the United States for a tractor.
  2. 1951The company adds a post driver to its line.
  3. 2010EP Series Auger Systems arrive.
  4. 2012The Hammer Post Driver is introduced.
  5. 2015The Intimidator tree and post puller joins the line.
  6. 2022The Hornet Post Driver is introduced.

Compare Danuser attachments

Search all 23 Danuser cards by line, name or feature. Spec tables are copied from each Danuser model page.

Showing all 23 models

Danuser Hammer post driver with skid-steer quick attach mount, black with yellow HAMMER lettering, front view

Fence attachment

Danuser Hammer

Drop-weight post driver for T-posts up to railroad ties; the maker calls it the original one-person post driver.

82,000lb. impact force (weight kit)
35strokes per minute
40 indrop stroke
300 lb.hammer weight
  • No springs, no hydraulics, no return lines
  • Full stroke every cycle, or short stroke to fine tune depth
  • Grapple option for one-person operation
  • Tilt option up to 20° each way
  • Weight kit raises the hammer from 300 lb. to 500 lb.
  • Skid-steer, tractor front-end loader and Euro/Global mounts
Full specifications
Post dimensionsT-post to Railroad tie
Impact force49,000 lb. / 82,000 lb. (loaded)
Impact energy1,025 ft.-lb. / 1,709 ft.-lb. (loaded)
Length of stroke40"
Hammer weight300 lb. / 500 lb. (loaded)
Strikes per minute35
Overall length45.5" / 46"
Overall width25" / 27.5"
Overall height64" / 65"
Machine weight915 lb. / 948 lb. / 920 lb. (SM40 / LM40 / EM40)
Hydraulic requirements1,500 - 3,000 PSI; 12 - 30 GPM
Maximum post width8.5" x 9.25"
Tractor requirements75 HP minimum
Part numbers21000 / 21006 / 21010

Source: Danuser Hammer Post Driver Series page (SM40, LM40 and EM40 base models).

Danuser Hornet T7 post driver on a skid-steer quick attach mount, front left three-quarter view

Fence attachment

Danuser Hornet T7

Quick, powerful driver for T-posts and posts or pipe up to 7 in., with a jackhammer-style power cell.

900max. strikes per minute
750ft.-lb. energy class
7 inpost or pipe size
10-30 GPMhydraulic flow
  • Flow control valve is standard, so it runs on vehicles up to 30 GPM
  • Tool-less quick change driving tools
  • Grapple option to pick up, load and drive posts from the seat
  • Tilt option up to 20° each way
  • Weight kit adds up to 616 lb. of ballast
  • Skid-steer and backhoe or excavator mounts
Full specifications
Post dimensionsT-post to 7"
Energy class750 ft.-lb.
Strikes per minute900 (max.)
Overall length (skid-steer mount)27"
Overall width (skid-steer mount)45.75"
Overall height (skid-steer mount)46"
Machine weight1,340 lb. skid-steer mount / 990 lb. backhoe and excavator mount
Hydraulic requirements2,000 - 3,500 PSI; 10 - 30 GPM
Driving tool inside diameter7.27"
Driving tool shaft diameter2.7"
MountSkid-Steer Quick Attach (not for front end loaders) / Backhoe & Excavator
Part numbers214050 / 214054

Source: Danuser Hornet Post Driver page (T7, skid-steer and backhoe/excavator base models).

Danuser Hornet T8-RR post driver, straight-on view showing the hydraulic components and post-pulling chain

Fence attachment

Danuser Hornet T8-RR

The larger Hornet for posts and pipe up to 8 in., and railroad ties up to 12 in. with the flat driving tool.

800max. strikes per minute
1,150ft.-lb. energy class
8 inpost or pipe size
13-30 GPMhydraulic flow
  • Railroad tie flat driving tool drives ties, posts and pipe up to 12 in.
  • Flow control valve is standard, so it runs on vehicles up to 30 GPM
  • Domed, flat or railroad tie flat driving tools swap without a hammer or punch
  • Grapple and tilt options on any model
  • Skid-steer and backhoe or excavator mounts
Full specifications
Post dimensionsT-post to 8" (RR tie with optional RR tie flat driving tool PN 196074R)
Energy class1,150 ft.-lb.
Strikes per minute800 (max.)
Overall length (skid-steer mount)27.4"
Overall width (skid-steer mount)45.75"
Overall height (skid-steer mount)52.8"
Machine weight1,565 lb. skid-steer mount / 1,190 lb. backhoe and excavator mount
Hydraulic requirements2,200 - 3,500 PSI; 13 - 30 GPM
Driving tool inside diameter8.27"
Driving tool shaft diameter3"
MountSkid-Steer Quick Attach (not for front end loaders) / Backhoe & Excavator
Part numbers214100 / 214104

Source: Danuser Hornet Post Driver page (T8-RR, skid-steer and backhoe/excavator base models).

Danuser T3 Driver post driver, front view with yellow T3 DRIVER lettering and hydraulic hoses

Fence attachment

Danuser T3 Driver

A small driver for T-posts up to 3 in. O.D. pipe at up to six strikes per second.

6strikes per second
3 inO.D. pipe
30 GPMmax. flow
2,000 lb.impact per stroke
  • Post top is fully contained to prevent kick out
  • Strike plate protects the top of the post
  • Tilt bracket option up to 20° left or right
  • Reversible skid-steer offset mount for driving near fence lines
  • Carried by a tractor, skid-steer, mini-ex, loader or backhoe
Full specifications
Post dimensionsT-posts to 3" O.D. pipe
Impact force2,000 lbs. per stroke
Impact energy40 ft.-lbs. per stroke
Hammer weight10 lbs.
Strokes per second6
Hydraulic requirements1,500 - 3,000 PSI & Up to 30 GPM
MountsSkid-Steer / Skid-Steer Offset / Euro/Global / Mini-Skid / John Deere 200/300/400/500 Series
Part numbers21300

Source: Danuser T3 Post Driver page.

Danuser Python Wire Winder, black frame with yellow PYTHON lettering, shown without wire

Fence attachment

Danuser Python Wire Winder

Rolls up old fence wire on a front-mounted hydraulic auger drive with a 2 in. hex connection.

3/4 milebarbed wire capacity
6 milessmooth wire capacity
10wire starter slots
98 lb.weight
  • Winds one strand or several at a time
  • Two wire tie grooves and ten wire starter slots
  • Retention pin storage locations
  • No tools needed to operate
  • Use only with front-mounted hydraulic auger drives
Full specifications
CapacityUp to 3/4 mile barbed (12.5 gauge) / up to 6 miles smooth (14 gauge)
Overall width22"
Overall height40.26"
Machine weight98 lbs.
Mount2" Hex
Part numbers170610

Source: Danuser Python Wire Winder page.

Danuser Python Wire Unroller, yellow spool carrier on a black angled frame, front left view

Fence attachment

Danuser Python Wire Unroller

Unrolls new and Python-rolled spools of barbed and smooth wire from a 2 in. receiver hitch.

9 1/2 inextra ground clearance
2 inreceiver hitch connection
22 inspool diameter
69 lb.weight
  • Controlled spinning to prevent backlash
  • Built-in wire tensioner cleats for stretching and holding wire
  • Rebar and T-post straightener for fence repair
  • Angled frame for clearance on uneven ground
Full specifications
CapacityUp to 3/4 mile barbed (12.5 gauge) / up to 6 miles smooth (14 gauge)
Length (rear hole to spool far edge)47"
Height (bottom of frame to top of spool)30.75"
Spool diameter22"
Machine weight69 lbs.
Mount2" receiver hitch
Part numbers180606

Source: Danuser Python Wire Unroller page.

Danuser EP Series hydraulic auger drive, black housing with yellow EP lettering (EP1530 shown)

Hydraulic auger drive

Danuser EP615

Hydraulic auger drive for 6 to 15 GPM machines, with augers up to 24 in. and a Danuser-built planetary.

6-15 GPMhydraulic flow
24 inmax. auger diameter
1,774ft.-lb. torque at 3,500 PSI
3.86:1gearbox ratio
  • Danuser-built planetary with easily reached check and fill plugs
  • Single-piece output spindle with a lifetime warranty against pullout
  • Motor hoses route out the top of the housing; 45° fittings installed
  • Adjustable carry angle of 15° or 30° on the mounts
  • Skid-steer, mini-skid-steer, tractor front-end loader and backhoe or excavator mounts
  • 5-year limited warranty listed on the EP Series page
Full specifications
Gearbox ratio3.86:1
Hydraulic requirements6 - 15 GPM up to 3,500 PSI
Max hydraulic back pressure1,500 PSI
Max auger diameter24"
Output torque at 3,500 PSI1,774 ft.-lb.
Part numbers180405

Source: Danuser EP Auger Series page.

Danuser EP Series hydraulic auger drive, black housing with yellow EP lettering (EP1530 shown)

Hydraulic auger drive

Danuser EP1020

Hydraulic auger drive for 10 to 20 GPM machines, with augers up to 30 in. and a Danuser-built planetary.

10-20 GPMhydraulic flow
30 inmax. auger diameter
2,222ft.-lb. torque at 3,500 PSI
3.86:1gearbox ratio
  • Danuser-built planetary with easily reached check and fill plugs
  • Single-piece output spindle with a lifetime warranty against pullout
  • Motor hoses route out the top of the housing; 45° fittings installed
  • Adjustable carry angle of 15° or 30° on the mounts
  • Skid-steer, mini-skid-steer, tractor front-end loader and backhoe or excavator mounts
  • 5-year limited warranty listed on the EP Series page
Full specifications
Gearbox ratio3.86:1
Hydraulic requirements10 - 20 GPM up to 3,500 PSI
Max hydraulic back pressure1,500 PSI
Max auger diameter30"
Output torque at 3,500 PSI2,222 ft.-lb.
Part numbers180406

Source: Danuser EP Auger Series page.

Danuser EP Series hydraulic auger drive, black housing with yellow EP lettering (EP1530 shown)

Hydraulic auger drive

Danuser EP1530

Hydraulic auger drive for 15 to 30 GPM machines, with augers up to 36 in. and a Danuser-built planetary.

15-30 GPMhydraulic flow
36 inmax. auger diameter
3,279ft.-lb. torque at 3,500 PSI
3.86:1gearbox ratio
  • Danuser-built planetary with easily reached check and fill plugs
  • Single-piece output spindle with a lifetime warranty against pullout
  • Motor hoses route out the top of the housing; 45° fittings installed
  • Adjustable carry angle of 15° or 30° on the mounts
  • Skid-steer, mini-skid-steer, tractor front-end loader and backhoe or excavator mounts
  • 5-year limited warranty listed on the EP Series page
Full specifications
Gearbox ratio3.86:1
Hydraulic requirements15 - 30 GPM up to 3,500 PSI
Max hydraulic back pressure1,500 PSI
Max auger diameter36"
Output torque at 3,500 PSI3,279 ft.-lb.
Part numbers180407

Source: Danuser EP Auger Series page.

Danuser EP Series hydraulic auger drive, black housing with yellow EP lettering (EP1530 shown)

Hydraulic auger drive

Danuser EP2035

Hydraulic auger drive for 20 to 35 GPM machines, with augers up to 36 in. and a Danuser-built planetary.

20-35 GPMhydraulic flow
36 inmax. auger diameter
4,426ft.-lb. torque at 3,500 PSI
3.86:1gearbox ratio
  • Danuser-built planetary with easily reached check and fill plugs
  • Single-piece output spindle with a lifetime warranty against pullout
  • Motor hoses route out the top of the housing; 45° fittings installed
  • Adjustable carry angle of 15° or 30° on the mounts
  • Skid-steer, mini-skid-steer, tractor front-end loader and backhoe or excavator mounts
  • 5-year limited warranty listed on the EP Series page
Full specifications
Gearbox ratio3.86:1
Hydraulic requirements20 - 35 GPM up to 3,500 PSI
Max hydraulic back pressure1,500 PSI
Max auger diameter36"
Output torque at 3,500 PSI4,426 ft.-lb.
Part numbers180408

Source: Danuser EP Auger Series page.

Row of five black Danuser auger bits standing upright in descending sizes

Auger bit

Danuser Industrial Auger Bits

Fab, Cast, Tree & Shrub, Bullet Rock, 2 in. Rock Drill and Wobble bits for Danuser black and gray auger drives.

6bit types
36-72 inFab bit lengths
3/8 inFab flighting thickness
  • Fab (light duty): bolt-on teeth for light to moderate ground
  • Cast (heavy duty): drive-in teeth for fracturable rock, asphalt, frozen ground and heavy clay
  • Bullet Rock: carbide bullet teeth for solid rock and concrete
  • Tree & Shrub: stepped design for planting
  • Compatible with non-Danuser auger drives
Full specifications
Bit typesFab (Light Duty) / Cast (Heavy Duty) / Tree & Shrub / Bullet Rock / 2" Rock Drill / Wobble
Spindle sizes2" Hex / 2" Round / 2-9/16" Round
Fab and Cast lengths36", 48" (standard), 60", 72"
Tree & Shrub length48"
Bullet Rock length48"
2" Rock Drill length36"
Fab flighting thickness3/8"

Source: Danuser Industrial Auger Bits page.

Danuser Wobble Auger, a slim black pointed bit with spiral hardfacing, shown upright on white

Auger bit

Danuser Wobble Auger

Spins with a wobbling motion to leave a clean hole with no loose debris at the top or bottom.

48 inlength
  • Ideal as a pilot bit
  • Produces ready-to-set holes with no loose dirt cleanup
  • Spiral and checkered hardfacing
  • Pushes through dirt, sand, clay, asphalt, frozen ground and embedded rock
Full specifications
Length48"
HardfacingSpiral and checkered
FitsEP Series Auger Drives

Source: Danuser Industrial Auger Bits page.

Danuser stepped serrated tree and shrub auger bit with a spiral flight and toothed cutting edges

Auger bit

Danuser Agricultural Auger Bits

Plain edge, serrated edge, tree and shrub, and hole digger head bits for hydraulic and PTO diggers.

4-36 inbit diameters
29-52 inlengths for PTO diggers
  • Plain edge for dirt, clay, sod and other light-duty conditions
  • Serrated edge for compact soils, light tree roots and dry soil
  • Stepped tree bit makes a cone-shaped hole for root bundles
  • Hole digger head is the most aggressive design for clay, shale, frozen ground and light rock
Full specifications
Bit typesPlain Edge / Serrated Edge / Tree & Shrub (Stepped) / Hole Digger Head
Diameters4" to 36"
Lengths29" / 33" / 40" / 52"
Spindle sizes2" Round / 2-9/16" Round

Source: Danuser Agricultural Auger Bits page.

Danuser 16 in. stump auger, black shaft with DANUSER lettering and cutting blades at the base

Auger bit

Danuser Stump Auger

A 2 in. hex auger attachment that planes away stumps without large, specialized equipment.

10 / 16 indiameters
27 inoverall length
1,700-3,000ft.-lb. of torque needed
  • Threaded pilot digs into the stump and large blades shave it away
  • Hardened steel blades are reversible for more cutting per blade
  • Overlap planing locations to remove the whole stump
  • The 10 in. runs on drive units with 1,700 ft.-lb. of torque or more; the 16 in. needs 3,000 or more
Full specifications
Diameter10" / 16"
Overall height27"
Weight50 lbs. / 70 lbs.
Cutting blades3 / 6
Mount2" hex
Torque needed from drive unit1,700 ft.-lb. or more / 3,000 ft.-lb. or more
Part numbers190127 / 200199

Source: Danuser Stump Auger page.

Danuser Mega Mixer material handling bucket with yellow safety grates, shown at an angle

Material handling bucket

Danuser Mega Mixer

Mix, scoop and dispense concrete, feed and other materials; dispenses left or right.

3/4 yardmaterial capacity
8 inauger diameter
26 secto dispense 3/4 yard at 25 GPM
805 lb.weight, manual gate
  • Adjustable mounting brackets and fork tine slots on both sides
  • Dual safety grates with integrated bag busters
  • Built-in cutting edges for scooping from piles
  • Two 2 ft. multi-link chutes store on the bucket
  • Manual gate or hydraulic gate; hoses and ISO couplers included
Full specifications
Capacity3/4 yard (20.25 cubic ft., 16.27 bushels)
Capacity with hopper extensionUp to 1 yard (27 cubic ft.)
Dispense rate26 seconds at 25 GPM
Hydraulic requirementsUp to 25 GPM; up to 3,500 PSI
Weight805 lb. (manual gate) / 960 lb. (hydraulic gate)
Auger diameter8"
Auger length70"
Overall width38.75"
Overall length93.75"
Mounting optionsSkid-Steer / Pallet Forks (Telehandler)
Part numbers170001 / 170002

Source: Danuser Mega Mixer page.

Danuser MAC Bucket mixing and conveying bucket with yellow grate and side discharge chute

Material handling bucket

Danuser MAC Bucket

Mixing and conveying bucket that transports, mixes and dispenses concrete, feed, grain, gravel and asphalt.

1/2 yardmaterial capacity
28 secdispense rate at 24 GPM
615 lb.weight, rubber auger
24 GPMmax. flow
  • Skid-steer quick attach mount on both sides for left or right discharge
  • No discharge gate; self-loads from loose piles
  • Rubber auger for concrete, wildlife feed and grain; steel auger for sand, asphalt and washed gravel
  • Two 24 in. multi-link chutes and two 7 ft. hoses included
Full specifications
Capacity1/2 yard (13.5 cubic ft.)
Capacity with hopper extensionUp to 3/4 yard (20 cubic ft.)
Dispense rate28 seconds @ 24 GPM
Hydraulic requirementsUp to 24 GPM; up to 3,500 PSI
Weight615 lb. (rubber auger) / 620 lb. (steel auger)
Auger diameter6.5" (rubber) / 6.12" (steel)
Auger length60"
Overall width26"
Overall length77.4"
Mounting optionsSkid-Steer Quick Attach
Part numbers230400 / 230401

Source: Danuser MAC Bucket page.

Danuser Mini MAC compact mixing bucket with yellow grate, black body and a dispensing chute at one end

Material handling bucket

Danuser Mini MAC

Small-batch mixing and dispensing in tight spaces, built for mini skid steers and mini track loaders.

1/4 yardmaterial capacity
14 secdispense rate at 24 GPM
370 lb.weight, universal mount
6 inauger diameter
  • Manual discharge gate for tight spaces like backyards, basements and between buildings
  • Hybrid steel and rubber auger limits material seepage
  • Safety grate with integrated bag busters
  • Common Industry Interface or Bob-Tach mount
  • One 24 in. multi-link chute and two hoses included
Full specifications
Capacity1/4 yard (6.75 cubic feet)
Dispense rate14 seconds at 24 GPM
Hydraulic requirementsUp to 24 GPM; up to 3,500 PSI
Weight370 lb. (CII mount) / 400 lb. (Bob-Tach mount)
Auger diameter6.12"
Auger length27.5"
Overall width24.5" / 36.5"
Overall length54" / 53"
Mounting optionsCommon Industry Interface (CII) / Bob-Tach for Mini Track Loaders
Part numbers230402 / 230403

Source: Danuser Mini MAC page.

Danuser skid-steer pallet forks with a full brick guard frame and two long tines

Loader attachment

Danuser Skid-Steer Pallet Forks

Skid-steer quick attach forks with a walk-thru or full brick guard, steps on both sides and multiple tie-downs.

5,500 lb.tine capacity
6,000 lb.frame support
48 intine length
  • Rail-style frame supports up to 6,000 lb.
  • Tines in 4,200 lb. or 5,500 lb. capacities
  • Walk-thru or full brick guard
  • Frames and tines sold separately or together
Full specifications
Fork tine lift capacity4,200 lb. or 5,500 lb.
Fork tine length48"
Fork tine width (min/max)9"-45"
Frame width45.5"
Overall width52"
Frame height35.75"
Overall height38.75"
Part numbers12030 (walk-thru) / 12017 (full brick guard)

Source: Danuser Pallet Forks Skid-Steer Quick Attach page.

Danuser pallet forks painted John Deere green on a front-end loader quick attach frame

Loader attachment

Danuser John Deere Loader Pallet Forks

Full brick guard forks color matched for John Deere front-end loader quick attach mounts.

5,500 lb.tine capacity
6,000 lb.frame support
48 intine length
  • Fits John Deere 200/300/400/500 and 600/700 series loaders
  • Full brick guard on a rail-style frame
  • Multiple tie-down locations and steps on both sides
  • Optional Multi-Purpose Grapple
Full specifications
Fork tine lift capacity4,200 lb. or 5,500 lb.
Fork tine length48"
Fork tine width (min/max)9"-45"
Frame width45.5"
Overall width49.5" / 50"
Frame height35.75" / 37"
Overall height38.75"
Part numbers12033 (200/300/400/500 series) / 12034 (600/700 series)

Source: Danuser John Deere Loader Pallet Forks page.

Danuser Euro/Global quick attach pallet forks with a full brick guard and two tines

Loader attachment

Danuser Euro/Global Pallet Forks

Full brick guard forks for Euro/Global quick attach loaders.

5,500 lb.tine capacity
6,000 lb.frame support
48 intine length
  • Heavy-duty frame with full brick guard
  • Multiple tie-down locations
  • Clear view to the fork tips
  • Optional Multi-Purpose Grapple
Full specifications
Fork tine lift capacity4,200 lb. or 5,500 lb.
Fork tine length48"
Fork tine width (min/max)9"-45"
Frame width45.5"
Overall width45.5"
Frame height37"
Overall height38.75"
Part numbers12035

Source: Danuser Pallet Forks Euro/Global Loader page.

Danuser Multi-Purpose Grapple mounted on a pallet fork frame with its arm raised open

Loader attachment

Danuser Multi-Purpose Grapple

Adds a clamping grapple to pallet fork frames for logs, brush, rock and fence posts.

9,500 lb.clamping force
55 inmax. jaw opening
150 lb.weight
  • Fits most carriage-style pallet fork frames with no modifications
  • Pins upright for normal fork use without removing the grapple
  • Built-in flow restrictors control opening and closing speed
  • 90 laser-cut teeth
Full specifications
Clamping force9,500 lbs.
Overall height in working position55
Overall height in pinned up position69.75"
Overall jaw width8.63"
Machine weight150 lbs.
Part numbers12085 (Danuser frames) / 170500 (other fork frame brands)

Source: Danuser Multi-purpose Grapple page.

Danuser Intimidator tree puller with yellow tapered toothed jaws, front three-quarter view

Loader attachment

Danuser Intimidator

Tree and post puller for skid steers and tractors that pulls, saws or digs roots, and carries what it pulls.

34 inmax. jaw opening
21,000 lb.max. cylinder force
125 HPmax. horsepower rating
710 lb.weight, skid-steer mount
  • Synchronized jaws driven by a rear-mounted, protected 3 in. cylinder
  • Tapered jaws grip larger trees near the back for more pulling force
  • Bidirectional side saw teeth on the 12200T cut trees flush to the ground
  • Replaceable excavator bucket teeth and jaw saw teeth cut roots
  • Skid-steer, Euro/Global or flat back for custom fabrication
Full specifications
Max jaw opening34"
Jaw material3/4" Thick Hardened T1 Grade Steel
Max cylinder force21,000 lbs.
Cylinder diameter3"
Max continuous operating pressure3,500 PSI
Minimum GPMNo minimum GPM
Overall width46" / 46.7"
Overall length54.2" / 56.7"
Overall height47.25"
Machine weight710 lbs. / 770 lbs. / 805 lbs. (skid-steer / Euro/Global / flat back)
Part numbers12200T / 12201T / 12200FT / 12200CSET (Case IH)

Source: Danuser Intimidator Tree Puller page.

Danuser Hammer CB40 concrete breaker, black frame with yellow HAMMER lettering, front view

Loader attachment

Danuser Hammer CB40 Concrete Breaker

A 40 in. drop hammer that breaks up to 9 in. of reinforced concrete for parking lots, foundations and curbs.

9 inreinforced concrete
82,000 lb.impact force
40 indrop hammer
35strokes per minute
  • Full stroke on every cycle
  • Anti-dry fire feature protects the machine
  • Free fall design gives smoother operation with less shock back to the vehicle
  • CB40 Breaker Kit converts any Hammer post driver
  • Skid-steer quick attach mount is standard
Full specifications
Overall length45.5"
Overall width25.1"
Overall height64"
Machine weight1,080 lb.
Hammer weight500 lb.
Length of stroke40"
Strikes per minute35 (max.)
Hydraulic requirements1,500 - 3,000 PSI; 12 - 30 GPM
Maximum concrete thickness9"
Impact force82,000 lb.
Impact energy1,709 ft.-lb.
Part numbers21017

Source: Danuser Hammer CB40 Concrete Breaker page.

Post drivers and fence wire tools at a glance

ModelHammerHornet T7Hornet T8-RRT3 DriverPython Wire WinderPython Wire Unroller
Post dimensionsT-post to Railroad tieT-post to 7"T-post to 8" (RR tie with optional RR tie flat driving tool PN 196074R)T-posts to 3" O.D. pipe––
Strikes per minute35900 (max.)800 (max.)–––
Hydraulic requirements1,500 - 3,000 PSI; 12 - 30 GPM2,000 - 3,500 PSI; 10 - 30 GPM2,200 - 3,500 PSI; 13 - 30 GPM1,500 - 3,000 PSI & Up to 30 GPM––
Machine weight915 lb. / 948 lb. / 920 lb. (SM40 / LM40 / EM40)1,340 lb. skid-steer mount / 990 lb. backhoe and excavator mount1,565 lb. skid-steer mount / 1,190 lb. backhoe and excavator mount–98 lbs.69 lbs.

EP hydraulic auger drives at a glance

ModelEP615EP1020EP1530EP2035
Hydraulic requirements6 - 15 GPM up to 3,500 PSI10 - 20 GPM up to 3,500 PSI15 - 30 GPM up to 3,500 PSI20 - 35 GPM up to 3,500 PSI
Max auger diameter24"30"36"36"
Output torque at 3,500 PSI1,774 ft.-lb.2,222 ft.-lb.3,279 ft.-lb.4,426 ft.-lb.
Gearbox ratio3.86:13.86:13.86:13.86:1
Max hydraulic back pressure1,500 PSI1,500 PSI1,500 PSI1,500 PSI

Mixing and material handling buckets at a glance

ModelMega MixerMAC BucketMini MAC
Capacity3/4 yard (20.25 cubic ft., 16.27 bushels)1/2 yard (13.5 cubic ft.)1/4 yard (6.75 cubic feet)
Capacity with hopper extensionUp to 1 yard (27 cubic ft.)Up to 3/4 yard (20 cubic ft.)–
Dispense rate26 seconds at 25 GPM28 seconds @ 24 GPM14 seconds at 24 GPM
Hydraulic requirementsUp to 25 GPM; up to 3,500 PSIUp to 24 GPM; up to 3,500 PSIUp to 24 GPM; up to 3,500 PSI
Weight805 lb. (manual gate) / 960 lb. (hydraulic gate)615 lb. (rubber auger) / 620 lb. (steel auger)370 lb. (CII mount) / 400 lb. (Bob-Tach mount)
Auger diameter8"6.5" (rubber) / 6.12" (steel)6.12"
Overall width38.75"26"24.5" / 36.5"
Overall length93.75"77.4"54" / 53"

Pallet forks, grapple and land clearing at a glance

ModelSkid-Steer Pallet ForksJohn Deere Loader Pallet ForksEuro/Global Pallet ForksIntimidatorHammer CB40 Concrete Breaker
Fork tine lift capacity4,200 lb. or 5,500 lb.4,200 lb. or 5,500 lb.4,200 lb. or 5,500 lb.––
Fork tine length48"48"48"––
Overall width52"49.5" / 50"45.5"46" / 46.7"25.1"
Overall height38.75"38.75"38.75"47.25"64"

Danuser parts and manuals

Danuser runs a replacement parts store at parts.danuser.com and posts an operator's manual for each attachment on danuser.com. Ask the Clinton Tractor parts counter for Danuser parts, and have the model and Part ID ready.

  • Auger bits
  • Points, teeth and cutting edges
  • Adapters and extensions
  • Hose kits
  • EP mounts
  • Strike plates
  • Weight kits
  • Wiring harnesses
  • Grapple kits
  • Tilt kits
  • Pallet fork frames
  • Rubber auger assemblies
Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

EP auger warranty

Danuser lists a 5-year limited warranty on its EP Series page and a lifetime warranty covering output spindle pullout.

Warranty terms

The EP Auger Series page lists a 5-Year Limited Warranty and a lifetime warranty covering output spindle pullout.

Danuser posts a separate warranty policy for each attachment on danuser.com.

Read the warranty policy for the model on danuser.com, or ask Danuser for the full terms.

Family-owned, built in Fulton, Missouri

Danuser Machine Company LLC is a fourth-generation, family-owned business based at 500 E. 3rd St., Fulton, MO.

About Danuser

The about page says the original shop was on the site of the present plant, and the family moved to Fulton in 1910.

Danuser lists business hours of Monday through Friday, 7:30am to 4:30pm Central.

Options and mounts

Danuser lists these options on its model pages. Check the model page for what fits your machine.

Also available

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday
Get directions(315) 853-6151

Driving distance

  • New Hartford 6 mi
  • Utica 9 mi
  • Rome 14 mi
  • Oneida 17 mi
  • Hamilton 20 mi
  • Herkimer 26 mi
  • Cazenovia 31 mi
  • Norwich 42 mi
  • Cooperstown 47 mi
  • Syracuse 49 mi
  • Oneonta 60 mi
  • Cortland 61 mi

Before you visit

Can I see Danuser attachments in person?

Call (315) 853-6151 before you drive over and ask which Danuser attachments we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.