Art's Way Farm Equipment Dealer in Central New York

Name: Clinton Tractor & Implement Co.
Address: 31 Meadow St, Clinton, NY, 13323, US
Telephone: (315) 853-6151

Clinton Tractor in Clinton, NY is an Art's Way dealer. The Iowa maker builds grinder mixers, manure spreaders, forage boxes, bale processors, graders and land planes for livestock and crop farms.

Call (315) 853-6151 Compare models

31 Meadow St, Clinton, NY 13323
Mon–Fri 7–5, Sat 7–12
(315) 853-6151

Grinder mixers and hammer mills

Art's Way started in 1956 with a PTO grinder mixer. Today it builds hammer mill and CattleMaxx roller mill grinder mixers from 105 to 215 bushels, plus portable and stationary hammer mills.

Art's Way 6105 Grinder Mixer105 bu. tank · 20 in. hammer mill · 40-100 hp required
Art's Way 6140 Grinder Mixer140 bu. tank · 20 in. hammer mill · 40-100 hp required
Art's Way 7165 Grinder Mixer165 bu. tank · 26 in. hammer mill · 80-160 hp required
Art's Way 8215 Grinder Mixer215 bu. tank · 26 in. hammer mill · 100-180 hp required
Art's Way CattleMaxx 6105 Grinder Mixer105 bu. tank · 20 in. roller mill · 40-100 hp required
Art's Way CattleMaxx 6140 Grinder Mixer140 bu. tank · 20 in. roller mill · 40-100 hp required
Art's Way CattleMaxx 7165 Grinder Mixer165 bu. tank · 30 in. roller mill · 50-120 hp required
Art's Way PHM26 Portable Hammer Mill26 in. hammer mill · 96 reversible hammers · 60-80 hp required
Art's Way SHM26 Stationary Hammer Mill26 in. hammer mill · 96 reversible hammers · 40-60 hp required

X Series manure spreaders

The X Series runs from 350 to 900 cubic feet heaped. Art's Way gave it an upgraded floor chain with a limited lifetime warranty, a guillotine slop gate and flared sides.

Art's Way X350 Manure Spreader367 cu. ft. heaped · 247 cu. ft. struck · 100-125 hp required
Art's Way X550 Manure Spreader551 cu. ft. heaped · 384 cu. ft. struck · 125-150 hp required
Art's Way X700 Manure Spreader683 cu. ft. heaped · 473 cu. ft. struck · 150-175 hp required
Art's Way X900 Manure Spreader909 cu. ft. heaped · 625 cu. ft. struck · 175-200 hp required
Art's Way X900 Litter Spreader909 cu. ft. heaped · 60 ft. spread width · 175-200 hp required

Forage boxes and high dump cart

The 2100 series forage boxes come in 16 to 24 foot lengths with in-cab controls, and the CFB26 adds a high capacity stainless box. The 9016-HD high dump cart runs alongside the harvester.

Art's Way 2116 Forage Box16 ft. floor · 975 cu. ft. heaped with ext. · 6,100 lbs. empty
Art's Way 2118 Forage Box18 ft. floor · 1,101 cu. ft. heaped with ext. · 6,600 lbs. empty
Art's Way 2120 Forage Box20 ft. floor · 1,226 cu. ft. heaped with ext. · 7,300 lbs. empty
Art's Way 2124 Forage Box24 ft. floor · 1,476 cu. ft. heaped with ext. · 1,385 cu. ft. with roof
Art's Way CFB26 Commercial Forage Box1644 cu. ft. heaped with ext. · 22 ft. floor · 667XH apron chain
Art's Way 9016-HD High Dump Cart930 cu. ft. struck · 40,000 lbs. rated load · 60-90 sec. cycle time

TOP-SPREAD bale processors

TOP-SPREAD mounts on a skid steer or telehandler, so bedding, feed or mulch is spread from the cab. It tips forward like a big bucket to load round or large square bales.

Art's Way 664 TOP-SPREAD Bale Processor120 cu. ft. loose material · 20 GPM required · 2,060 lbs.
Art's Way 864 TOP-SPREAD Bale Processor160 cu. ft. loose material · 20 GPM required · 2,260 lbs.

Graders and land planes

LS graders shape yards and work sites with 12 to 16 foot blades. Folding V-series land planes level fields and remove furrows at 24 or 30 feet.

Art's Way LS1200S Grader12 ft. blade · 40-180 hp required · 3,000 lbs.
Art's Way LS1400S Grader14 ft. blade · 80-200 hp required · 3,150 lbs.
Art's Way LS1600S Grader16 ft. blade · 100-220 hp required · 3,305 lbs.
Art's Way V2400 Land Plane24 ft. blade · 4 cu. yd. blade capacity · 150-180 hp required
Art's Way V3000 Land Plane30 ft. blade · 5 cu. yd. blade capacity · 180-250 hp required

Art's Way history

Iowa farmer Arthur Luscombe built a rugged PTO grinder mixer on his farm near Dolliver, Iowa, and founded Art's Way in 1956 to build and sell it. In 1959 he moved the plant to its present site in Armstrong, Iowa.

Over the years Art's Way added the Eversman land planes in the 1990s, the MillerPro and Badger hay and forage lines in 2007, and Roda manure spreaders in 2010. The maker says it focuses on specialized niche markets, and it has about 120 employees across two locations.

1956Arthur Luscombe founds Art's Way to sell the PTO grinder mixer he built on his farm.
1959The company moves to its present location in Armstrong, Iowa, and builds grinder mixers for other makers.
1974Art's Way goes public under the ticker ARTW.
1990sThe Eversman line brings land planes, levelers, ditchers and scrapers.
2007Art's Way buys the MillerPro and Badger hay and forage lines, including forage boxes.
2019Art's Way introduces the 8215 grinder mixer, which the maker calls the largest tank option in the United States.

Compare Art's Way machines

Search all 27 Art's Way machines by line, name or feature. Specs are copied from each model's page on artsway.com.

Showing all 27 models

Art's Way feed mill

Art's Way 6105 Grinder Mixer

The compact hammer mill grinder mixer: a 105 bushel tank on a 540 rpm PTO

105bu. tank

20in. hammer mill

40-100hp required

3,540lbs. with auger feeder

20 inch hammer mill
72 four-way reversible hammers
540 RPM PTO drive
Hydraulic trough auger feeder
Mechanical lift and swing discharge auger

Full specifications

Capacity of Mixing Tank	105 bushel (130.7 cu. ft.)
Width of Mill	20 in.
Height (with tire size)	106 in.
Overall Length	170 in.
Width with Auger Feeder	95 in.
Weight with Auger Feeder	3,540 lbs.
Reversible Hammers	72
Screen Area	600 sq. in.
PTO Drive	540 RPM
Operating Speed of Mill	2,800-3,000 RPM
Horsepower Requirement	40-100 hp
Auger Feeder Length	96 in.
Auger Feeder Diameter	10 in.
Auger Feeder Type	Hydraulic Trough
Diameter of Mixing Auger	12 in. flighting/13 in. tube/24 in. base
Discharge Auger Tube Diameter	8 in.
Discharge Auger Type (lift & swing)	Mechanical
Unload Auger Reach 60° Angle	16 ft. 8 in. (10 ft. Tube)
Unload Auger Reach 3 ft. Extension 60° Angle	19 ft. 3 in. (10 ft. Tube)
Unload Auger Reach 6 ft. Extension 60° Angle	22 ft. (10 ft. Tube)
Supplement Hopper Size	21 x 24 in.
Tires	10 x 15 8 ply rib implement
Ground Clearance	10 in.

Source: Art's Way 6105 Grinder Mixer page.

Art's Way feed mill

Art's Way 6140 Grinder Mixer

A 140 bushel hammer mill grinder mixer for a 540 or 1000 rpm tractor

140bu. tank

20in. hammer mill

40-100hp required

4,500lbs. with auger feeder

20 inch hammer mill
72 four-way reversible hammers
540 or 1000 RPM PTO drive
Hydraulic lift and swing discharge auger
13.5 x 16.1 high flotation tires

Full specifications

Capacity of Mixing Tank	140 bushel (173.2 cu. ft.)
Width of Mill	20 in.
Height (with tire size)	112 in.
Overall Length	170 in.
Width with Auger Feeder	110 in.
Weight with Auger Feeder	4,500 lbs.
Reversible Hammers	72
Screen Area	600 sq. in.
PTO Drive	1000 RPM, 540 RPM
Operating Speed of Mill	2,800-3,000 RPM
Horsepower Requirement	40-100 hp
Auger Feeder Length	96 in.
Auger Feeder Diameter	10 in.
Auger Feeder Type	Hydraulic Trough
Diameter of Mixing Auger	12 in. flighting/13 in. tube/24 in. base
Discharge Auger Tube Diameter	8 in.
Discharge Auger Type (lift & swing)	Hydraulic
Unload Auger Reach 60° Angle	16 ft. 5 in. (10 ft Tube)
Unload Auger Reach 3 ft. Extension 60° Angle	19 ft. (10 ft. Tube)
Unload Auger Reach 6 ft. Extension 60° Angle	21 ft. 6 in. (10 ft. Tube)
Supplement Hopper Size	21 x 24 in.
Tires	13.5 x 16.1 8 ply high flotation
Ground Clearance	10 in.

Source: Art's Way 6140 Grinder Mixer page.

Art's Way feed mill

Art's Way 7165 Grinder Mixer

A 165 bushel grinder mixer with a 26 inch hammer mill

165bu. tank

26in. hammer mill

80-160hp required

780sq. in. screen area

26 inch hammer mill
96 four-way reversible hammers
540 or 1000 RPM PTO drive
Hydraulic tube auger feeder
Hydraulic cooler, the maker says

Full specifications

Capacity of Mixing Tank	165 bushel (205.3 cu. ft.)
Width of Mill	26 in.
Height (with tire size)	126 in.
Overall Length	175 in.
Width with Auger Feeder	114 in.
Weight with Auger Feeder	5,200 lbs.
Reversible Hammers	96
Screen Area	780 sq. in.
PTO Drive	1000 RPM, 540 RPM
Operating Speed of Mill	2,800-3,000 RPM
Horsepower Requirement	80-160 hp
Auger Feeder Length	96 in.
Auger Feeder Diameter	10 in.
Auger Feeder Type	Hydraulic Tube
Diameter of Mixing Auger	12 in. flighting/13 in. tube/24 in. base
Discharge Auger Tube Diameter	10 in.
Discharge Auger Type (lift & swing)	Hydraulic
Unload Auger Reach 60° Angle	20 ft. 3 in. (12 ft. Tube)
Unload Auger Reach 3 ft. Extension 60° Angle	22 ft. 10 in. (12 ft. Tube)
Unload Auger Reach 6 ft. Extension 60° Angle	25 ft. 5 in. (12 ft. Tube)
Supplement Hopper Size	21 x 24 in.
Tires	13.5 x 16.1 8 ply high flotation
Ground Clearance	13 in.

Source: Art's Way 7165 Grinder Mixer page.

Art's Way feed mill

Art's Way 8215 Grinder Mixer

The largest Art's Way grinder mixer: a 215 bushel tank on a 1000 rpm PTO

215bu. tank

26in. hammer mill

100-180hp required

7,200lbs. with auger feeder

26 inch hammer mill
96 four-way reversible hammers
1000 RPM PTO drive
118 in. hydraulic tube auger feeder
17 in. ground clearance

Full specifications

Capacity of Mixing Tank	215 bushel (277 cu. ft.)
Width of Mill	26 in.
Height (with tire size)	135.25 in.
Overall Length	197.62 in.
Width with Auger Feeder	120 in.
Weight with Auger Feeder	7,200 lbs.
Reversible Hammers	96
Screen Area	780 sq. in.
PTO Drive	1000 RPM
Operating Speed of Mill	2,800-3,000 RPM
Horsepower Requirement	100-180 hp
Auger Feeder Length	118 in.
Auger Feeder Diameter	10 in.
Auger Feeder Type	Hydraulic Tube
Diameter of Mixing Auger	12 in. flighting/13 in. tube/24 in. base
Discharge Auger Tube Diameter	10 in.
Discharge Auger Type (lift & swing)	Hydraulic
Unload Auger Reach 60° Angle	21 ft. 6 in. (12 ft. Tube)
Unload Auger Reach 3 ft. Extension 60° Angle	24 ft. (12 ft. Tube)
Unload Auger Reach 6 ft. Extension 60° Angle	26 ft. 6 in. (12 ft. Tube)
Supplement Hopper Size	21 x 24 in.
Tires	385-65-R22.5 Implement
Ground Clearance	17 in.

Source: Art's Way 8215 Grinder Mixer page.

Art's Way feed mill

Art's Way CattleMaxx 6105 Grinder Mixer

Roller mill grinder mixer with a 105 bushel tank for a more consistent grind

105bu. tank

20in. roller mill

40-100hp required

540RPM PTO

20 inch heavy duty roller mill
540 RPM PTO drive
12 inch mixing auger
4 large inspection windows
8 inch x 10 foot unloading auger

Full specifications

Capacity of Mixing Tank	105 bushel (130.7 cu. ft.)
Width of Mill	20 in.
Height (with tire size)	106 in.
Overall Length	170 in.
Width with Auger Feeder	95 in.
Weight with Auger Feeder	3,540 lbs.
PTO Drive	540 RPM
Operating Speed of Mill	540 RPM
Horsepower Requirement	40-100 hp
Auger Feeder Length	96 in.
Auger Feeder Diameter	10 in.
Auger Feeder Type	Hydraulic Tube
Diameter of Mixing Auger	12 in. flighting/13 in. tube/24 in. base
Discharge Auger Tube Diameter	8 in.
Discharge Auger Type (lift & swing)	Mechanical
Unload Auger Reach 60° Angle	16 ft. 8 in. (10 ft. Tube)
Unload Auger Reach 3 ft. Extension 60° Angle	19 ft. 3 in. (10 ft. Tube)
Unload Auger Reach 6 ft. Extension 60° Angle	22 ft. (10 ft. Tube)
Supplement Hopper Size	21 x 24 in.
Tires	10 x 15 8 ply rib implement
Ground Clearance	10 in.

Source: Art's Way CattleMaxx 6105 Grinder Mixer page.

Art's Way feed mill

Art's Way CattleMaxx 6140 Grinder Mixer

Roller mill grinder mixer with a 140 bushel tank

140bu. tank

20in. roller mill

40-100hp required

4,500lbs. with auger feeder

20 inch heavy duty roller mill
540 RPM PTO drive
12 inch mixing auger
5 large inspection windows
Hydraulic lift and swing discharge auger

Full specifications

Capacity of Mixing Tank	140 bushel (173.2 cu. ft.)
Width of Mill	20 in.
Height (with tire size)	112 in.
Overall Length	170 in.
Width with Auger Feeder	110 in.
Weight with Auger Feeder	4,500 lbs.
PTO Drive	540 RPM
Operating Speed of Mill	540 RPM
Horsepower Requirement	40-100 hp
Auger Feeder Length	96 in.
Auger Feeder Diameter	10 in.
Auger Feeder Type	Hydraulic Tube
Diameter of Mixing Auger	12 in. flighting/13 in. tube/24 in. base
Discharge Auger Tube Diameter	8 in.
Discharge Auger Type (lift & swing)	Hydraulic
Unload Auger Reach 60° Angle	16 ft. 5 in. (10 ft Tube)
Unload Auger Reach 3 ft. Extension 60° Angle	19 ft. (10 ft. Tube)
Unload Auger Reach 6 ft. Extension 60° Angle	21 ft. 6 in. (10 ft. Tube)
Supplement Hopper Size	21 x 24 in.
Tires	13.5 x 16.1 8 ply high flotation
Ground Clearance	10 in.

Source: Art's Way CattleMaxx 6140 Grinder Mixer page.

Art's Way feed mill

Art's Way CattleMaxx 7165 Grinder Mixer

Roller mill grinder mixer with a 165 bushel tank and 30 inch rolls

165bu. tank

30in. roller mill

50-120hp required

5,200lbs. with auger feeder

30 inch heavy duty roller mill
540 RPM PTO drive
12 inch mixing auger
5 large inspection windows
10 inch x 12 foot unloading auger with hydraulic lift cylinder

Full specifications

Capacity of Mixing Tank	165 bushel (205.3 cu. ft.)
Width of Mill	30 in.
Height (with tire size)	126 in.
Overall Length	175 in.
Width with Auger Feeder	114 in.
Weight with Auger Feeder	5,200 lbs.
PTO Drive	540 RPM
Operating Speed of Mill	540 RPM
Horsepower Requirement	50-120 hp
Auger Feeder Length	96 in.
Auger Feeder Diameter	10 in.
Auger Feeder Type	Hydraulic Tube
Diameter of Mixing Auger	12 in. flighting/13 in. tube/24 in. base
Discharge Auger Tube Diameter	10 in.
Discharge Auger Type (lift & swing)	Hydraulic
Unload Auger Reach 60° Angle	20 ft. 3 in. (12 ft. Tube)
Unload Auger Reach 3 ft. Extension 60° Angle	22 ft. 10 in. (12 ft. Tube)
Unload Auger Reach 6 ft. Extension 60° Angle	25 ft. 5 in. (12 ft. Tube)
Supplement Hopper Size	21 x 24 in.
Tires	13.5 x 16.1 8 ply high flotation
Ground Clearance	13 in.

Source: Art's Way CattleMaxx 7165 Grinder Mixer page.

Art's Way feed mill

Art's Way PHM26 Portable Hammer Mill

A portable 26 inch hammer mill for processing one thing at a time

26in. hammer mill

96reversible hammers

60-80hp required

1,600lbs.

26 inch hammer mill
540 or 1000 RPM drive
Optional auger feeder
780 sq. in. screen area

Full specifications

Width of Mill	26 in.
Height (with tire size)	154.73 in
Overall Length	186.78 in
Width with Auger Feeder	80.6 in
Weight with Auger Feeder	1,600 lbs.
Reversible Hammers	96
Screen Area	780 sq. in.
PTO Drive	1000 RPM, 540 RPM
Operating Speed of Mill	2,800-3,000 RPM
Auger Feeder Length	96 in.
Auger Feeder Diameter	10 in.
Auger Feeder Type	Hydraulic Trough
Discharge Auger Type (lift & swing)	Mechanical
Discharge Auger Tube Diameter	8 in.
Unload Auger Reach 60° Angle	10 ft. 7 in. (10 ft. Tube)
Tires	7.60 x 15 8 ply
Ground Clearance	13 in.
Horsepower Requirement	60-80 hp

Source: Art's Way Portable Hammer Mill page.

Art's Way feed mill

Art's Way SHM26 Stationary Hammer Mill

A stationary 26 inch hammer mill in electric or PTO drive

26in. hammer mill

96reversible hammers

40-60hp required

1,350lbs.

26 inch hammer mill
Electric or PTO drive
Stable auger out base
780 sq. in. screen area

Full specifications

Width of Mill	26 in.
Height (with tire size)	106 in.
Overall Length	83 in.
Width with Auger Feeder	68 in.
Weight with Auger Feeder	1,350 lbs.
Reversible Hammers	96
Screen Area	780 sq. in.
PTO Drive	1000 RPM, Electric
Operating Speed of Mill	2,800-3,000 RPM
Horsepower Requirement	40-60 hp
Discharge Auger Type (lift & swing)	Mechanical
Discharge Auger Tube Diameter	8 in. in Hopper

Source: Art's Way Stationary Hammer Mill page.

Art's Way manure spreader

Art's Way X350 Manure Spreader

The compact X Series spreader: a 14.5 foot box holding 367 cubic feet

367cu. ft. heaped

247cu. ft. struck

100-125hp required

30ft. spread width

Vertical SRT8 beaters (Berma)
Reversible 88C apron chain with tube slats
Guillotine end gate
Single or tandem axle
540 or 1000 RPM PTO

Full specifications

Load Height Standard Tire	6 ft. 2 in.
Load Height Float Tire	6 ft. 4 in.
Flare	No
Box Inner Width	4 ft. 11 in.
Box Inner Length	~14.5 ft.
Box Inner Height	3 ft. 3.5 in.
Box Side Material	12 Gauge
Box Floor Material	1/2 in. Densilite
Overall Width	8 ft. 5 in./9 ft. 10 in.
Overall Length	25 ft. 1 in.
Overall Height (float/std tire)	8 ft. 3 in./8 ft. 5 in.
Overall Empty Weight (lbs.)	8,020 lbs.
Overall Struck Weight (lbs.)	22,840 lbs.
Overall Heaped Weight (lbs.)	30,040 lbs.
Struck Manure Weight (Lbs) - Est. 60 Lbs/Cu. Ft.	14,820 lbs.
Heaped Manure Weight (Lbs) - Est. 60 Lbs/Cu. Ft.	22,020 lbs.
Struck Capacity (cu. ft.)	247 cu. ft.
Heaped Capacity (cu. ft.)	367 cu. ft.
Apron Chain Link Style	88C
Apron Chain Slat Style	Tube
Variable Apron Speed	Standard
Reversible Apron Chain	Standard
Beater Style	Vertical SRT8
Beater Make	Berma
Beater Speed	420 RPM
Gearbox Style	Single
Gearbox Make	Berma
End Gate	Guillotine
Shear Protection	Rear Shear Bolt/Over Running Clutch/Friction Clutch
Estimated Spread Width	30 ft.
Tongue Weight (Empty)	~260 lbs. (5% TW)
Tongue Weight (Heaped)	~3,200 lbs. (12% TW)
Hitch	2 in. Swivel
Horsepower Requirement	100-125 hp
PTO	1-3/4" 1000 RPM, 1-3/8" 1000 RPM, 540 RPM
Axle Configuration	Single, Tandem
Tires (Base)	Single axle 16.00/R-20 used military, tandem axle 425/65R22.5 used truck
Tires (Float)	Single axle 600/65R 22.5, tandem axle 550/45R22.5 Flotation Set of 4 – BKT
Shipping Dimensions	7 ft. 8 in. x 25 ft. 6 in. x 9 ft. 2 in.
Slop Gate Cylinders	Chief
Shipping Weight	9,000 lbs

Source: Art's Way X350 Manure Spreader page.

Art's Way manure spreader

Art's Way X550 Manure Spreader

Mid-sized manure spreader that handles it all, with a 19 foot box

551cu. ft. heaped

384cu. ft. struck

125-150hp required

30ft. spread width

Tandem axle
Permanent 45° flared sides
Vertical SRT8 beaters (Berma)
Reversible 88C apron chain
Guillotine end gate

Full specifications

Load Height Standard Tire	6 ft. 10 in.
Load Height Float Tire	7 ft.
Flare	Yes
Flare Type	Permanent
Flare Angle	45°
Flare Height	8 in.
Box Inner Width	4 ft. 11 in.
Box Inner Length	~19 ft.
Box Inner Height	3 ft. 3.5 in.
Box Side Material	12 Gauge
Box Floor Material	1/2 in. Densilite
Overall Width	9 ft. 10 in./11 ft. 1 in.
Overall Length	29 ft. 1 in
Overall Height (float/std tire)	8 ft. 11 in./9 ft. 1 in.
Overall Empty Weight (lbs.)	10,600 lbs.
Overall Struck Weight (lbs.)	33,640 lbs.
Overall Heaped Weight (lbs.)	43,660 lbs.
Struck Manure Weight (Lbs) - Est. 60 Lbs/Cu. Ft.	23,040 lbs.
Heaped Manure Weight (Lbs) - Est. 60 Lbs/Cu. Ft.	33,060 lbs.
Struck Capacity (cu. ft.)	384 cu. ft.
Heaped Capacity (cu. ft.)	551 cu. ft.
Apron Chain Link Style	88C
Apron Chain Slat Style	Tube
Variable Apron Speed	Standard
Reversible Apron Chain	Standard
Beater Style	Vertical SRT8
Beater Make	Berma
Beater Speed	420 RPM
Gearbox Style	Single
Gearbox Make	Berma
End Gate	Guillotine
Shear Protection	Rear Shear Bolt/Over Running Clutch/Friction Clutch
Estimated Spread Width	30 ft.
Tongue Weight (Empty)	~600 lbs. (10% TW)
Tongue Weight (Heaped)	~7,700 lbs. (20% TW)
Hitch	2 in. Swivel
Horsepower Requirement	125-150 hp
PTO	1-3/4" 1000 RPM, 1-3/8" 1000 RPM
Axle Configuration	Tandem
Tires (Base)	16.00/R-20 used military, 425/65R22.5 used truck
Tires (Float)	600/65R 22.5
Shipping Dimensions	7 ft. 8 in. x 29 ft. 2 in. x 8 ft. 1 in.
Slop Gate Cylinders	Chief
Shipping Weight	10,600 lbs.

Source: Art's Way X550 Manure Spreader page.

Art's Way manure spreader

Art's Way X700 Manure Spreader

An 18 foot box holding 683 cubic feet, with dual gearboxes

683cu. ft. heaped

473cu. ft. struck

150-175hp required

12,200lbs. empty

10 gauge box sides, 3/4 in. Densilite floor
Dual Berma gearboxes
Reversible 88C apron chain
Digistar or Raven scales optional
1-3/8 in. or 1-3/4 in. 1000 RPM PTO

Full specifications

Load Height Standard Tire	7 ft. 8 in.
Load Height Float Tire	7 ft. 5 in.
Flare	Yes
Flare Type	Permanent
Flare Angle	45°
Flare Height	11 in.
Box Inner Width	6 ft.
Box Inner Length	~18 ft.
Box Inner Height	4 ft. 3 in.
Box Side Material	10 Gauge
Box Floor Material	3/4 in. Densilite
Overall Width	11 ft. 1.5 in.
Overall Length	27 ft. 9in.
Overall Height (float/std tire)	116 in. / 118 in.
Overall Empty Weight (lbs.)	12,200 lbs.
Overall Struck Weight (lbs.)	40,580 lbs.
Overall Heaped Weight (lbs.)	53,180 lbs.
Struck Manure Weight (Lbs) - Est. 60 Lbs/Cu. Ft.	28,380 lbs.
Heaped Manure Weight (Lbs) - Est. 60 Lbs/Cu. Ft.	40,980 lbs.
Struck Capacity (cu. ft.)	473 cu. ft.
Heaped Capacity (cu. ft.)	683 cu. ft.
Apron Chain Link Style	88C
Apron Chain Slat Style	Tube
Variable Apron Speed	Standard
Reversible Apron Chain	Standard
Beater Style	Vertical SRT8
Beater Make	Berma
Beater Speed	420 RPM
Gearbox Style	Dual
Gearbox Make	Berma
End Gate	Guillotine
Shear Protection	Rear Shear Bolt/Over Running Clutch/Friction Clutch
Estimated Spread Width	30 ft.
Tongue Weight (Empty)	~825 lbs. (12% TW)
Tongue Weight (Heaped)	~11,350 lbs. (23% TW)
Scales	Digistar Opt., Raven Opt.
Hitch	2 in. Swivel
Horsepower Requirement	150-175 hp
PTO	1-3/4" 1000 RPM, 1-3/8" 1000 RPM
Axle Configuration	Tandem
Tires (Base)	16.00/R-20 used military
Tires (Float)	600/65R 22.5
Shipping Dimensions	8 ft. 5 in. x 28 ft. x 9 ft. 10 in.
Slop Gate Cylinders	Prince
Shipping Weight	12,200 lbs.

Source: Art's Way X700 Manure Spreader page.

Art's Way manure spreader

Art's Way X900 Manure Spreader

The biggest X Series box: 20 feet long, 909 cubic feet heaped

909cu. ft. heaped

625cu. ft. struck

175-200hp required

35ft. spread width

Vertical SRT18 beaters (Berma)
Dual gearboxes
Reversible 88C apron chain
Digistar or Raven scales optional
Also offered as a truck mount

Full specifications

Load Height Standard Tire	7 ft. 10 in.
Load Height Float Tire	7 ft. 7 in.
Flare	Yes
Flare Type	Permanent
Flare Angle	45°
Flare Height	8 in.
Box Inner Width	78 in.
Box Inner Length	~20 ft.
Box Inner Height	4 ft. 8 in.
Box Side Material	10 Gauge
Box Floor Material	3/4 in. Densilite
Overall Width	11 ft. 5.5 in.
Overall Length	30 ft. 11 in.
Overall Height (float/std tire)	118 in./120 in.
Overall Empty Weight (lbs.)	16,800 lbs.
Overall Struck Weight (lbs.)	52,250 lbs.
Overall Heaped Weight (lbs.)	69,290 lbs.
Struck Manure Weight (Lbs) - Est. 60 Lbs/Cu. Ft.	37,500 lbs.
Heaped Manure Weight (Lbs) - Est. 60 Lbs/Cu. Ft.	54,540 lbs.
Struck Capacity (cu. ft.)	625 cu. ft.
Heaped Capacity (cu. ft.)	909 cu ft.
Apron Chain Link Style	88C
Apron Chain Slat Style	Tube
Variable Apron Speed	Standard
Reversible Apron Chain	Standard
Beater Style	Vertical SRT18
Beater Make	Berma
Beater Speed	420 RPM
Gearbox Style	Dual
Gearbox Make	Berma
End Gate	Guillotine
Shear Protection	Over Running Clutch/Friction Clutch
Estimated Spread Width	35 ft.
Tongue Weight (Empty)	~625 lbs. (8% TW)
Tongue Weight (Heaped)	~12,975 lbs. (21% TW)
Scales	Digistar Opt., Raven Opt.
Hitch	2 in. Swivel
Horsepower Requirement	175-200 hp
PTO	1-3/4" 1000 RPM, 1-3/8" 1000 RPM
Axle Configuration	Tandem
Tires (Base)	16.00/R-20 used military
Tires (Float)	600/65R 22.5
Shipping Dimensions	8 ft. 5 in. x 32 ft. x 9 ft. 10 in.
Slop Gate Cylinders	Prince
Shipping Weight	14,750 lbs.

Source: Art's Way X900 Manure Spreader page.

Art's Way manure spreader

Art's Way X900 Litter Spreader

The X900 box with horizontal beaters and spinner pans for poultry litter

909cu. ft. heaped

60ft. spread width

175-200hp required

15,750lbs. shipping

Horizontal SRT18 beaters with spreading pans
Two-way hydraulic back door
Adjustable spread width
Optional Raven rate control with weigh bars

Full specifications

Load Height Standard Tire	7 ft. 10 in.
Load Height Float Tire	7 ft. 7 in.
Flare	Yes
Flare Type	Permanent
Flare Angle	45°
Flare Height	8 in.
Box Inner Width	6 ft.
Box Inner Length	~20 ft.
Box Inner Height	4 ft. 8 in.
Box Side Material	10 Gauge
Box Floor Material	3/4 in. Densilite
Overall Width	11 ft. 5.5 in.
Overall Length	32 ft. 2 in.
Overall Height (float/std tire)	9 ft. 5 in./9 ft. 8 in.
Overall Empty Weight (lbs.)	17,321
Overall Struck Weight (lbs.)	52,250 lbs.
Overall Heaped Weight (lbs.)	67,321
Struck Manure Weight (Lbs) - Est. 60 Lbs/Cu. Ft.	37,500 lbs.
Struck Capacity (cu. ft.)	625 cu. ft.
Heaped Capacity (cu. ft.)	909 cu ft.
Apron Chain Link Style	88C
Apron Chain Slat Style	Tube
Variable Apron Speed	Standard
Reversible Apron Chain	Standard
Beater Style	Horizontal SRT18
Beater Make	Berma
Beater Speed	483(PANS) / 426(BEATERS)
Gearbox Style	Dual
Gearbox Make	Berma
End Gate	Guillotine
Shear Protection	Over Running Clutch/Friction Clutch
Estimated Spread Width	60 ft.
Tongue Weight (Empty)	~1350 (9%)
Tongue Weight (Heaped)	~10841 (16%)
Scales	Digistar Opt., Raven Opt.
Hitch	2 in. Swivel
Horsepower Requirement	175-200 hp
PTO	1-3/4" 1000 RPM, 1-3/8" 1000 RPM
Axle Configuration	Tandem
Tires (Base)	600/65R 22.5
Tires (Float)	600/65R 22.5
Shipping Dimensions	8 ft. 5 in. x 32 ft. x 9 ft. 10 in.
Shipping Weight	15,750 lbs.
X900 LITTER Spreader	The 900 cubic feet litter spreader is made for the big haulers. Those that are doing their own hauling and are taking too many trips out of the lot, need this one. With an overall length of 32 feet, easily maneuver in and out of gates. Operate your floor chain speed and gate height to achieve the amount per acre for best nutrient management. We’re bringing you the durability, versatility, and efficiency you want and need in any poultry litter operation. This unit features a two way hydraulic back door. Easily open the full door for maintenance and cleaning access or adjust the bottom door to better control your spread distance. We’ve got you covered!

Source: Art's Way X900 Litter Spreader page.

Art's Way forage equipment

Art's Way 2116 Forage Box

16 foot forage box with front, rear or combo unload

16ft. floor

975cu. ft. heaped with ext.

6,100lbs. empty

667Xapron chain

Front, rear or combo unload
Optional in-cab controls
20 gauge aluminized steel sides
1/2 in. Densilite floor
Serpentine apron chain tensioning

Full specifications

Floor Length	16 ft.
Overall Length	239-3/4 in.
Inside Height (w/o extensions)	73-5/8 in.
Inside Height (w/ extensions)	89-5/8 in.
Overall Height (w/o extensions)	110-5/8 in.
Overall Height (w/ extensions)	110-5/8 in.
Overall Height w/ roof	117.5 in.
Inside Width	87-5/16 in.
Struck Capacity (w/o extensions) (Front/Combo Unload)	711 cu. ft.
Struck Capacity (w/ extensions) (Front/Combo Unload)	858 cu. ft.
Struck Capacity (w/o extensions) (Rear Unload)	749 cu. ft.
Struck Capacity (w/ extensions) (Rear Unload)	910 cu. ft.
Heaped Capacity (w/o extensions) (Front/Combo Unload)	831 cu. ft.
Heaped Capacity (w/ extensions) (Front/Combo Unload)	975 cu. ft.
Heaped Capacity (w/o extensions) (Rear Unload)	881 cu. ft.
Heaped Capacity (w/ extensions) (Rear Unload)	1,038 cu. ft.
Capacity w/ roof (Front/Combo Unload)	917 cu. ft.
Capacity w/ roof (Rear Unload)	974 cu. ft.
Front Drive Shaft	2 in.
Side Stakes	2 in. x 5 in. on 51-3/8 in. centers
Box Side Material	20 gauge Aluminized Steel with 1-5/16 in. corrugation
Box Floor Material	1/2 in. Densilite
Floor Supports	2 in. x 2 in. on 25-11/16 in. centers with 3 in. Support Strips
Top Rail	Formed metal reinforced with tubing
Apron Chain Link Style	667X
Apron Chain Speed	20 ft./minute variable
Apron Chain Tensioning	Serpentine Tensioning
Cross Conveyor Chain	CA550
Outfeed	30 in. Std. Hydraulic lift Std.
Rear Gate Delay	Optional
4th Beater/Side Extensions	Optional
Roof	Optional
Manual Hydraulic Drive	Optional
In-Cab Control Hydraulic Drive	Screen w/ push button
Empty Weight (w/o extensions)	6,100 lbs.
Empty Weight (w/ extensions)	6,600 lbs.
Tires (Base)	15×10 -8 Bolt Rim w/12.5Lx15 – 12 Ply Tire
Tires (Float)	22.5×13 – 8 Bolt Rim w/425/65R22.5 Used Truck Tire

Source: Art's Way 16-Foot Forage Box page.

Art's Way forage equipment

Art's Way 2118 Forage Box

18 foot forage box; dual front and rear unload available

18ft. floor

1,101cu. ft. heaped with ext.

6,600lbs. empty

20ft./min apron

Dual front/rear unload option
Optional in-cab controls
20 gauge aluminized steel sides
30 in. outfeed with hydraulic lift
Roof, 4th beater and side extensions optional

Full specifications

Floor Length	18 ft.
Overall Length	263-3/4 in.
Inside Height (w/o extensions)	73-5/8 in.
Inside Height (w/ extensions)	89-5/8 in.
Overall Height (w/o extensions)	110-5/8 in.
Overall Height (w/ extensions)	110-5/8 in.
Overall Height w/ roof	117.5 in.
Inside Width	87-5/16 in.
Struck Capacity (w/o extensions) (Front/Combo Unload)	800 cu. ft.
Struck Capacity (w/ extensions) (Front/Combo Unload)	967 cu. ft.
Struck Capacity (w/o extensions) (Rear Unload)	838 cu. ft.
Struck Capacity (w/ extensions) (Rear Unload)	1,019 cu. ft.
Heaped Capacity (w/o extensions) (Front/Combo Unload)	937 cu. ft.
Heaped Capacity (w/ extensions) (Front/Combo Unload)	1,101 cu. ft.
Heaped Capacity (w/ extensions) (Rear Unload)	1,164 cu. ft.
Heaped Capacity (w/o extensions) (Rear Unload)	987 cu. ft.
Capacity w/ roof (Front/Combo Unload)	1,034 cu. ft.
Capacity w/ roof (Rear Unload)	1,092 cu. ft.
Front Drive Shaft	2 in.
Side Stakes	2 in. x 5 in. on 42-1/4 in. centers
Box Side Material	20 gauge Aluminized Steel with 1-5/16 in. corrugation
Box Floor Material	1/2 in. Densilite
Floor Supports	2 in. x 2 in. on 21-1/8 in. centers with 3 in. Support Strips
Top Rail	Formed metal reinforced with tubing
Apron Chain Link Style	667X
Apron Chain Speed	20 ft./minute variable
Apron Chain Tensioning	Serpentine Tensioning
Cross Conveyor Chain	CA550
Outfeed	30 in. Std. Hydraulic lift Std.
Rear Gate Delay	Optional
4th Beater/Side Extensions	Optional
Roof	Optional
Manual Hydraulic Drive	Optional
In-Cab Control Hydraulic Drive	Screen w/ push button
Empty Weight (w/o extensions)	6,600 lbs.
Empty Weight (w/ extensions)	7,100 lbs.
Tires (Base)	16.1×11 – 8 Bolt Rim w/ 14Lx16.1 – 12 Ply Tire
Tires (Float)	400/55R22.5 Flotation Tire – Set of 4

Source: Art's Way 18-Foot Forage Box page.

Art's Way forage equipment

Art's Way 2120 Forage Box

20 foot forage box; dual front and rear unload available

20ft. floor

1,226cu. ft. heaped with ext.

7,300lbs. empty

20ft./min apron

Dual front/rear unload option
Optional in-cab controls
20 gauge aluminized steel sides
30 in. outfeed with hydraulic lift
Rear gate delay optional

Full specifications

Floor Length	20 ft.
Overall Length	23 ft. 11.75 in.
Inside Height (w/o extensions)	73-5/8 in.
Inside Height (w/ extensions)	89-5/8 in.
Overall Height (w/o extensions)	110-5/8 in.
Overall Height (w/ extensions)	110-5/8 in.
Overall Height w/ roof	117.5 in.
Inside Width	87-5/16 in.
Overall Width w/ Conveyor up	112.25 in.
Struck Capacity (w/o extensions) (Front/Combo Unload)	889 cu. ft.
Struck Capacity (w/ extensions) (Front/Combo Unload)	1076 cu. ft.
Struck Capacity (w/o extensions) (Rear Unload)	927 cu. ft.
Struck Capacity (w/ extensions) (Rear Unload)	1127 cu. ft.
Heaped Capacity (w/o extensions) (Front/Combo Unload)	1,042 cu. ft.
Heaped Capacity (w/ extensions) (Front/Combo Unload)	1,226 cu. ft.
Heaped Capacity (w/o extensions) (Rear Unload)	1,093 cu. ft.
Heaped Capacity (w/ extensions) (Rear Unload)	1,289 cu. ft.
Capacity w/ roof (Front/Combo Unload)	1150 cu. ft.
Capacity w/ roof (Rear Unload)	1,208 cu. ft.
Front Drive Shaft	2 in.
Side Stakes	2 in. x 5 in. on 37-11/16 in. Centers
Box Side Material	20 gauge Aluminized Steel with 1-5/16 in. corrugation
Box Floor Material	1/2 in. Densilite
Floor Supports	2 in. x 2 in. on 18-7/8 in. Centers with 3 in. Support Strips
Top Rail	Formed metal reinforced with tubing
Apron Chain Link Style	667X
Apron Chain Speed	20 ft./minute variable
Apron Chain Tensioning	Serpentine Tensioning
Cross Conveyor Chain	CA550
Outfeed	30 in. Std. Hydraulic lift Std.
Rear Gate Delay	Optional
4th Beater/Side Extensions	Optional
Roof	Optional
Manual Hydraulic Drive	Optional
In-Cab Control Hydraulic Drive	Screen w/ push button
Empty Weight (w/o extensions)	7,300 lbs.
Empty Weight (w/ extensions)	7,800 lbs.
Tires (Base)	16.1×14 – 8 Bolt Rim w/ 16.5Lx16.1 – 12 Ply Tire
Tires (Float)	560/45R22.5 Flotation – 8 Bolt Wheel

Source: Art's Way 20-Foot Forage Box page.

Art's Way forage equipment

Art's Way 2124 Forage Box

24 foot forage box, the longest of the 2100 series

24ft. floor

1,476cu. ft. heaped with ext.

1,385cu. ft. with roof

667Xapron chain

Dual front/rear unload option
Optional in-cab controls
1/2 in. Densilite floor
CA550 cross conveyor chain
Flotation tire options

Full specifications

Floor Length	24 ft.
Overall Length	335-3/4 in.
Inside Height (w/o extensions)	73-5/8 in.
Inside Height (w/ extensions)	89-5/8 in.
Overall Height (w/o extensions)	110-5/8 in.
Overall Height (w/ extensions)	110-5/8 in.
Overall Height w/ roof	117.5 in.
Inside Width	87-5/16 in.
Struck Capacity (w/o extensions) (Front/Combo Unload)	1,068 cu. ft.
Struck Capacity (w/ extensions) (Front/Combo Unload)	1,293 cu. ft.
Heaped Capacity (w/o extensions) (Front/Combo Unload)	1,254 cu. ft.
Heaped Capacity (w/ extensions) (Front/Combo Unload)	1,476 cu. ft.
Capacity w/ roof (Front/Combo Unload)	1,385 cu. ft.
Front Drive Shaft	2 in.
Side Stakes	2 in. x 5 in. on 37-11/16 in. Centers
Box Floor Material	1/2 in. Densilite
Box Side Material	20 gauge Aluminized Steel with 1-5/16 in. corrugation
Floor Supports	2 in. x 2 in. on 18-7/8 in. Centers with 3 in. Support Strips
Top Rail	Formed metal reinforced with tubing
Apron Chain Link Style	667X
Apron Chain Speed	20 ft./minute variable
Apron Chain Tensioning	Serpentine Tensioning
Cross Conveyor Chain	CA550
Outfeed	30 in. Std. Hydraulic lift Std.
Rear Gate Delay	Optional
4th Beater/Side Extensions	Optional
Roof	Optional
Manual Hydraulic Drive	Optional
In-Cab Control Hydraulic Drive	Screen w/ push button
Tires (Base)	22.5×13 – 10 Bolt Rim w/425/65R22.5 Used Truck Tire-Requires 4 each
Tires (Float)	400 Flotation – Set of 4
Tires (Optional #3)	560/45R22.5 Flotation Tire-Requires 4 each

Source: Art's Way 24-Foot Forage Box page.

Art's Way forage equipment

Art's Way CFB26 Commercial Forage Box

High capacity forage box with stainless steel sides for larger operations

1644cu. ft. heaped with ext.

22ft. floor

667XHapron chain

2in. front drive shaft

16 gauge stainless steel sides
Optional in-cab controls
Dual front/rear unload option
Serpentine apron chain tensioning

Full specifications

Floor Length	22 ft.
Overall Length	26’ 11-3/4”
Inside Height (w/ extensions)	95 in.
Overall Height (w/o extensions)	110-5/8 in.
Overall Height (w/ extensions)	158 in.
Inside Width	122.25 in W/ CONVEYOR UP
Struck Capacity (w/ extensions) (Front/Combo Unload)	1449 CU. FT.
Heaped Capacity (w/ extensions) (Front/Combo Unload)	1644 CU. FT.
Front Drive Shaft	2 in.
Side Stakes	2-1/2 in. x 2-1/2 in. on 24 in. Centers
Box Side Material	16 Guage Stainless Steel
Floor Supports	1-1/2 in. x 1-1/2 in. on 12” Centers
Top Rail	Tubing
Apron Chain Link Style	667XH
Apron Chain Speed	Series: 17.5’/Minute Variable: 8.75’/Minute Variable
Apron Chain Tensioning	Serpentine Tensioning
Outfeed	30 in. Std. Hydraulic lift Std.
In-Cab Control Hydraulic Drive	Screen w/ push button
Tires (Base)	560-45R22.5 Tires

Source: Art's Way Commercial Forage Box page.

Art's Way forage equipment

Art's Way 9016-HD High Dump Cart

A 930 cubic foot high dump cart rated for 40,000 lbs.

930cu. ft. struck

40,000lbs. rated load

60-90sec. cycle time

9-15ft. dump height at pivot

Dumps left or right
Flotation tires
4 axle positions
Scale system, flare kit and ladder optional

Full specifications

Tank Length	16 ft.
Dump Capacity	40,000 lbs.
Struck Capacity (cu. ft.)	930 cu. ft.
Struck Capacity (cu. yd.)	34.44 cu. yd.
Struck Capacity w/ Extensions (cu. ft)	1,158 cu. ft.
Heaped Capacity w/ Extensions (cu. ft.)	1,355 cu. ft.
Cycle Time	60-90 seconds
Dump Direction	Left, Right
Dump Height at Pivot	9-15 ft.
Dump Clearance at Pouring	7-13 ft.
Counter Weight	Standard
Tread Width	120-132 in.
Reversible	Yes
Ship Weight	16,000 lbs.
Axle Clearance	20 in.
Axle Placement	4 positions
Lift Cylinders	5 in. and 4 in. primary secondary
Tilt Cylinders	5 in. parallel
Tongue Weight %	8-11%
Recommended Min. Flow	15 gpm
Sideways Reach (lowest)	16 in.
Sideways Reach (highest)	42 in.
Tire Option	30.5L -32 16 Ply Flotation
Wheels	10 bolt
Spindles	4-1/2 inch bolt-in cold rolled
Jack	12,000 lb.
Hitch	Swivel
Weight Scale	Opt.

Source: Art's Way 9016-HD High Dump Cart page.

Art's Way bale processor

Art's Way 664 TOP-SPREAD Bale Processor

Skid steer bale processor for 5x6 round and 4x4x6 square bales

120cu. ft. loose material

20GPM required

2,060lbs.

20-40ft. spread

Patented twin rotors
Reversible pintle apron with tube slats
Runs off skid steer auxiliary hydraulics
Tilts forward to load bales

Full specifications

Bale Size	5 ft. x 6 ft. Round, 4 ft. x 4 ft. x 6 ft. Square
Loose Material (cu. ft.)	120 cu. ft.
Hydraulic GPM Requirements	20 GPM
Weight	2,060 lbs.
Length Across Loader	122 in.
Width in Front of Loader	67 in.
Height	67 in.
Deflector Door	24 in.
Loader Weight Capacity	2,500 lbs.
Processing Method	Patented Twin Rotors
Processing Size	6-12 in.
Discharge Direction	Left side
Bale Loading	Front Machine Tilt
Bale Movement	Pintle Apron, Reversible with Tube Slats
Spread Distance	20-40 ft. (GPM Dependent)
Controls	Skid Steer Aux Hydraulics
High Flow	Requires HF Connectors

Source: Art's Way 664 TOP-SPREAD page.

Art's Way bale processor

Art's Way 864 TOP-SPREAD Bale Processor

The longer TOP-SPREAD for 5x6 round and 4x4x8 square bales

160cu. ft. loose material

20GPM required

2,260lbs.

20-40ft. spread

Patented twin rotors
Reversible pintle apron with tube slats
Runs off skid steer auxiliary hydraulics
Tilts forward to load bales

Full specifications

Bale Size	5 ft. x 6 ft. Round, 4 ft. x 4 ft. x 8 ft. Square
Loose Material (cu. ft.)	160 cu. ft.
Hydraulic GPM Requirements	20 GPM
Weight	2,260 lbs.
Length Across Loader	122 in.
Width in Front of Loader	67 in.
Height	67 in.
Deflector Door	24 in.
Loader Weight Capacity	2,600 lbs.
Processing Method	Patented Twin Rotors
Processing Size	6-12 in.
Discharge Direction	Left side
Bale Loading	Front Machine Tilt
Bale Movement	Pintle Apron, Reversible with Tube Slats
Spread Distance	20-40 ft. (GPM Dependent)
Controls	Skid Steer Aux Hydraulics
High Flow	Requires HF Connectors

Source: Art's Way 864 TOP-SPREAD page.

Art's Way dirt work equipment

Art's Way LS1200S Grader

Pull-type grader with a 12 foot blade

12ft. blade

40-180hp required

3,000lbs.

8 ft. 4 in.transport width

15° blade tilt for slope cuts
43° blade angle with blade swing
15 in. ground clearance
Rear steer and gauge wheels optional

Full specifications

Blade Width	12 ft.
Blade Angle	43°
Blade Tilt	15°
Blade Height	30 in.
Overall Length	17 ft. 5 in.
Ground Clearance	15 in.
Transport Width	8 ft. 4 in.
Tires	2-11Lx15
Hubs	6 – Bolt
Horsepower Requirement	40-180 hp
Total Weight	3,000 lbs.
Tongue Weight	555 lbs.
Frame Tube Sides	8 x 6 x 5/16
Shipping Dimensions	14 ft. x 4 ft.
Rear Steer	Optional
Gauge Wheels	Optional

Source: Art's Way LS1200S Grader page.

Art's Way dirt work equipment

Art's Way LS1400S Grader

Pull-type grader with a 14 foot blade

14ft. blade

80-200hp required

3,150lbs.

9ft. transport width

15° blade tilt for slope cuts
43° blade angle with blade swing
30 in. blade height
Rear steer and gauge wheels optional

Full specifications

Blade Width	14 ft.
Blade Angle	43°
Blade Tilt	15°
Blade Height	30 in.
Overall Length	17 ft. 5 in.
Ground Clearance	15 in.
Transport Width	9 ft.
Tires	2-11Lx15
Hubs	6 – Bolt
Horsepower Requirement	80-200 hp
Total Weight	3,150 lbs.
Tongue Weight	610 lbs.
Frame Tube Sides	8 x 6 x 5/16
Shipping Dimensions	15 ft. x 4 ft.
Rear Steer	Optional
Gauge Wheels	Optional

Source: Art's Way LS1400S Grader page.

Art's Way dirt work equipment

Art's Way LS1600S Grader

Pull-type grader with a 16 foot blade

16ft. blade

100-220hp required

3,305lbs.

9 ft. 8 in.transport width

15° blade tilt for slope cuts
43° blade angle with blade swing
15 in. ground clearance
Rear steer and gauge wheels optional

Full specifications

Blade Width	16 ft.
Blade Angle	43°
Blade Tilt	15°
Blade Height	30 in.
Overall Length	17 ft. 5 in.
Ground Clearance	15 in.
Transport Width	9 ft. 8 in.
Tires	2-11Lx15
Hubs	6 – Bolt
Horsepower Requirement	100-220 hp
Total Weight	3,305 lbs.
Tongue Weight	680 lbs.
Frame Tube Sides	8 x 6 x 5/16
Shipping Dimensions	16 x 4 ft.
Rear Steer	Optional
Gauge Wheels	Optional

Source: Art's Way LS1600S Grader page.

Art's Way dirt work equipment

Art's Way V2400 Land Plane

Folding land plane with a 24 foot blade

24ft. blade

4cu. yd. blade capacity

150-180hp required

12ft. transport width

Folding wings
22 in. blade depth
4-1/2 in. depth control cylinder
Patented floating hitch
S-tines optional

Full specifications

Weight - Main Bundle	3,900 lbs.
Weight - Tires	250 lbs. – Single Wheels, 475 lbs. – Dual Wheels
Weight - S-Tines	1,000 lbs.
Blade Width	24 ft.
Blade Depth	22 in.
Blade Capacity	4 cu. yd.
Effective Leveling Length	30-35 in.
Transport Width	12 ft.
Transport Ground Clearance	12 in.
Depth Control Cylinder Diameter	4-1/2 in.
Horsepower Requirement	150-180 hp
Hitch	Patented Floating Hitch
S-Tines	Optional

Source: Art's Way V2400 Land Plane page.

Art's Way dirt work equipment

Art's Way V3000 Land Plane

Folding land plane with a 30 foot blade

30ft. blade

5cu. yd. blade capacity

180-250hp required

14ft. transport width

Folding wings
22 in. blade depth
4-1/2 in. depth control cylinder
Patented floating hitch
S-tines optional

Full specifications

Weight - Main Bundle	5,000 lbs.
Weight - Tires	250 lbs. – Single Wheels, 475 lbs. – Dual Wheels
Weight - S-Tines	1,500 lbs.
Blade Width	30 ft.
Blade Depth	22 in.
Blade Capacity	5 cu. yd.
Effective Leveling Length	30-35 in.
Transport Width	14 ft.
Transport Ground Clearance	12 in.
Depth Control Cylinder Diameter	4-1/2 in.
Horsepower Requirement	180-250 hp
Hitch	Patented Floating Hitch
S-Tines	Optional

Source: Art's Way V3000 Land Plane page.

Grinder mixers and hammer mills at a glance

Model	6105 Grinder Mixer	6140 Grinder Mixer	7165 Grinder Mixer	8215 Grinder Mixer	CattleMaxx 6105 Grinder Mixer	CattleMaxx 6140 Grinder Mixer	CattleMaxx 7165 Grinder Mixer	PHM26 Portable Hammer Mill	SHM26 Stationary Hammer Mill
Capacity of Mixing Tank	105 bushel (130.7 cu. ft.)	140 bushel (173.2 cu. ft.)	165 bushel (205.3 cu. ft.)	215 bushel (277 cu. ft.)	105 bushel (130.7 cu. ft.)	140 bushel (173.2 cu. ft.)	165 bushel (205.3 cu. ft.)	–	–
Width of Mill	20 in.	20 in.	26 in.	26 in.	20 in.	20 in.	30 in.	26 in.	26 in.
Horsepower Requirement	40-100 hp	40-100 hp	80-160 hp	100-180 hp	40-100 hp	40-100 hp	50-120 hp	60-80 hp	40-60 hp
PTO Drive	540 RPM	1000 RPM, 540 RPM	1000 RPM, 540 RPM	1000 RPM	540 RPM	540 RPM	540 RPM	1000 RPM, 540 RPM	1000 RPM, Electric
Screen Area	600 sq. in.	600 sq. in.	780 sq. in.	780 sq. in.	–	–	–	780 sq. in.	780 sq. in.
Weight with Auger Feeder	3,540 lbs.	4,500 lbs.	5,200 lbs.	7,200 lbs.	3,540 lbs.	4,500 lbs.	5,200 lbs.	1,600 lbs.	1,350 lbs.

X Series manure spreaders at a glance

Model	X350 Manure Spreader	X550 Manure Spreader	X700 Manure Spreader	X900 Manure Spreader	X900 Litter Spreader
Heaped Capacity (cu. ft.)	367 cu. ft.	551 cu. ft.	683 cu. ft.	909 cu ft.	909 cu ft.
Struck Capacity (cu. ft.)	247 cu. ft.	384 cu. ft.	473 cu. ft.	625 cu. ft.	625 cu. ft.
Horsepower Requirement	100-125 hp	125-150 hp	150-175 hp	175-200 hp	175-200 hp
Estimated Spread Width	30 ft.	30 ft.	30 ft.	35 ft.	60 ft.
Beater Style	Vertical SRT8	Vertical SRT8	Vertical SRT8	Vertical SRT18	Horizontal SRT18
Overall Empty Weight (lbs.)	8,020 lbs.	10,600 lbs.	12,200 lbs.	16,800 lbs.	17,321

Forage boxes and high dump cart at a glance

Model	2116 Forage Box	2118 Forage Box	2120 Forage Box	2124 Forage Box	CFB26 Commercial Forage Box
Floor Length	16 ft.	18 ft.	20 ft.	24 ft.	22 ft.
Heaped Capacity (w/ extensions) (Front/Combo Unload)	975 cu. ft.	1,101 cu. ft.	1,226 cu. ft.	1,476 cu. ft.	1644 CU. FT.
Struck Capacity (w/ extensions) (Front/Combo Unload)	858 cu. ft.	967 cu. ft.	1076 cu. ft.	1,293 cu. ft.	1449 CU. FT.
Apron Chain Link Style	667X	667X	667X	667X	667XH
Overall Length	239-3/4 in.	263-3/4 in.	23 ft. 11.75 in.	335-3/4 in.	26’ 11-3/4”

TOP-SPREAD bale processors at a glance

Model	664 TOP-SPREAD Bale Processor	864 TOP-SPREAD Bale Processor
Bale Size	5 ft. x 6 ft. Round, 4 ft. x 4 ft. x 6 ft. Square	5 ft. x 6 ft. Round, 4 ft. x 4 ft. x 8 ft. Square
Loose Material (cu. ft.)	120 cu. ft.	160 cu. ft.
Hydraulic GPM Requirements	20 GPM	20 GPM
Loader Weight Capacity	2,500 lbs.	2,600 lbs.
Weight	2,060 lbs.	2,260 lbs.
Spread Distance	20-40 ft. (GPM Dependent)	20-40 ft. (GPM Dependent)

Graders and land planes at a glance

Model	LS1200S Grader	LS1400S Grader	LS1600S Grader	V2400 Land Plane	V3000 Land Plane
Blade Width	12 ft.	14 ft.	16 ft.	24 ft.	30 ft.
Horsepower Requirement	40-180 hp	80-200 hp	100-220 hp	150-180 hp	180-250 hp
Transport Width	8 ft. 4 in.	9 ft.	9 ft. 8 in.	12 ft.	14 ft.

Genuine Art's Way parts

Clinton Tractor's parts counter orders genuine Art's Way parts. Art's Way posts operator and parts manuals on artsway.com, including manuals for machines no longer built. It says it still provides most service parts for older grinder mixers. Bring us your model and serial number and we will look up the part.

Reversible hammers
Hammer mill screens
Grinder belts
Apron chain and slats
Beater teeth and knives
Bearings
Rubber flaps
Slop gate material
Densilite flooring
Grader blade edges
Tires

Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

How Art's Way builds its equipment

01Reversible apron chain
X Series spreaders carry full tube slats on an 88C pintle chain. Run it in reverse to move the load away from the beaters and remove foreign objects. The chain has a limited lifetime warranty.
02Flared sides
The X550, X700 and X900 have flared sides. They give your bucket a base and lower the loading height, which adds capacity over straight sides.
03Hydraulic cooler on the 7165
Art's Way says the 7165 grinder mixer's hydraulic cooler helps it run more efficiently.
04High dump cart in the field
The 9016-HD runs beside or behind the harvester on flotation tires and holds 930 cubic feet struck and dumps left or right. A scale system is optional.
05Spread from the cab
TOP-SPREAD runs off skid steer hydraulics. Joystick buttons run the rotors forward or in reverse, so you can bed pens or mulch a site from the cab.
06Folding land planes
V-series land planes have folding wings and a patented floating hitch, with a 4-1/2 in. depth control cylinder.

Two-year grinder mixer warranty

Grinder mixers get one year full warranty, then a second year parts only. Other Art's Way machines are covered for one year.

Warranty terms

Art's Way warrants the products it sells to be free from defects in material and workmanship for the periods in its Warranty Coverage Table.

Machines used commercially (custom work, rentals) are warranted for 180 days from delivery and must be reported as commercial use at registration.

Genuine Art's Way service parts are warranted against defects for 90 days from the invoice date or the date an authorized dealer installs them.

This warranty does not cover normal wear and tear, maintenance and consumable items.

The policy covers new Art's Way farm machinery sold in the US only.

Lifetime apron chain warranty

X Series spreader apron chain with tube slats carries a limited lifetime warranty on individual links and slats.

Built in Iowa

Art's Way farm equipment has been built in Iowa since 1956.

Options

Art's Way lists these options on its build and price pages. Not every option fits every model, so ask us which ones fit the machine you want.

Also available

Self-contained hydraulics, auger feeders and roll feed
Choose tractor or self-contained hydraulics, an auger feeder and roll feed for hay.
Grinder mixers
Unload auger extensions
3 ft. or 6 ft. bolt-on or folding extensions for higher reach.
Grinder mixers
Weigh-Tronix scale indicators
Model 660 basic readout or Model 2060 with recipes.
Grinder mixers
Hammer mill screens
Screens from 3/32 to 2 in.; the first screen comes with the machine.
Hammer mill grinder mixers
Weigh bars, Digistar scales and Raven rate control
For scale-ready loads and precision application records.
X700, X900
Hardened beater teeth and litter paddle kit
1/2 in. formed teeth with flip-able knives; litter paddles for fine material.
X700, X900
Side extensions, 4th beater, roof and wind screen
Plus rear gate delay, running gear, trailer or truck saddle kit.
2100 series forage boxes
Scale system, flare kit and ladder
A scale system, a flare kit for lighter materials and a maintenance ladder.
9016-HD
Mulch screen, rubber flap kit and loader adapters
Plus an electric deflector door control and wire harnesses.
TOP-SPREAD
Rear steer and gauge wheels
Rear steering, and a gauge wheel on the left or right edge of the blade.
LS graders
S-tines and single or dual carrier wheels
V2400: CAT III N hitch. V3000: CAT IV N hitch. Both can take a quick hitch adapter.
Land planes

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday

Get directions (315) 853-6151

Driving distance

New Hartford 6 mi
Utica 9 mi
Rome 14 mi
Oneida 17 mi
Hamilton 20 mi
Herkimer 26 mi
Cazenovia 31 mi
Norwich 42 mi
Cooperstown 47 mi
Syracuse 49 mi
Oneonta 60 mi
Cortland 61 mi

Before you visit

Can I see Art's Way machines in person?

Call (315) 853-6151 before you drive over and ask which Art's Way machines we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.

Art's Way Farm Equipment Dealer in Central New York

Grinder mixers and hammer mills

X Series manure spreaders

Forage boxes and high dump cart

TOP-SPREAD bale processors

Graders and land planes

Art's Way history

Compare Art's Way machines

Art's Way 6105 Grinder Mixer

Art's Way 6140 Grinder Mixer

Art's Way 7165 Grinder Mixer

Art's Way 8215 Grinder Mixer

Art's Way CattleMaxx 6105 Grinder Mixer

Art's Way CattleMaxx 6140 Grinder Mixer

Art's Way CattleMaxx 7165 Grinder Mixer

Art's Way PHM26 Portable Hammer Mill

Art's Way SHM26 Stationary Hammer Mill

Art's Way X350 Manure Spreader

Art's Way X550 Manure Spreader

Art's Way X700 Manure Spreader

Art's Way X900 Manure Spreader

Art's Way X900 Litter Spreader

Art's Way 2116 Forage Box

Art's Way 2118 Forage Box

Art's Way 2120 Forage Box

Art's Way 2124 Forage Box

Art's Way CFB26 Commercial Forage Box

Art's Way 9016-HD High Dump Cart

Art's Way 664 TOP-SPREAD Bale Processor

Art's Way 864 TOP-SPREAD Bale Processor

Art's Way LS1200S Grader

Art's Way LS1400S Grader

Art's Way LS1600S Grader

Art's Way V2400 Land Plane

Art's Way V3000 Land Plane

Grinder mixers and hammer mills at a glance

X Series manure spreaders at a glance

Forage boxes and high dump cart at a glance

TOP-SPREAD bale processors at a glance

Graders and land planes at a glance

Genuine Art's Way parts

Service department

How Art's Way builds its equipment

01Reversible apron chain

02Flared sides

03Hydraulic cooler on the 7165

04High dump cart in the field

05Spread from the cab

06Folding land planes

Two-year grinder mixer warranty

Lifetime apron chain warranty

Built in Iowa

Options

Also available

Self-contained hydraulics, auger feeders and roll feed

Unload auger extensions

Weigh-Tronix scale indicators

Hammer mill screens

Weigh bars, Digistar scales and Raven rate control

Hardened beater teeth and litter paddle kit

Side extensions, 4th beater, roof and wind screen

Scale system, flare kit and ladder

Mulch screen, rubber flap kit and loader adapters

Rear steer and gauge wheels

S-tines and single or dual carrier wheels

Find us in Clinton

Driving distance

Before you visit