(315) 853-6151
AGI Hutchinson HX2 swingaway auger with a red frame and grey tube beside a steel grain bin

AGI Hutchinson & Mayrath Augers and Conveyors Dealer in Central New York

AGI Hutchinson makes portable and stationary augers, belt and chain conveyors, grain pumps and bin unloads, with the Mayrath name on its parts catalog. Clinton Tractor in Clinton, NY is an AGI Hutchinson & Mayrath dealer for Central New York farms.

Call (315) 853-6151 Compare models

Portable augers

Swingaway, top drive, truck and U-trough augers. The maker says its HX and MX swingaway augers use a heavy-duty scissor-lift frame, commercial strength trussing and a low-profile hopper.

Portable belt conveyors

Field loaders, a PTO swing conveyor, drive-over Pitstop and transfer conveyors, with a 10 inch tube and 15 inch belt on most models.

Portable chain conveyors and grain pumps

En masse chain and paddle conveyors that move grain in columns. Hutchinson says its UHMW paddles keep grain flowing gently.

Stationary augers and chain conveyors

Roof, utility and custom augers, plus grain pump loops and drag conveyors for permanent on-farm and commercial handling.

Bin unloads, sweeps and towers

Sweeps, under-bin unloads and power heads that empty bins, plus Eclipse towers and catwalks for equipment support.

Hutchinson and Mayrath at AGI

AGI says it was established in 1996 as Ag Growth International and grew by acquisition. Hutchinson and Mayrath came with its Global Industries purchase, along with MFS, York, Stormor, Brownie, GTS, NECO and Sentinel.

Today AGI Hutchinson lists portable and stationary augers, chain and paddle conveyors, belt conveyors, loop systems, bin unloads and custom augers. Its HX2 swingaway auger brochure carries the AGI Hutchinson Mayrath name.

  1. 1996Ag Growth International is established.
  2. 2016 to 2018AGI adds Global Industries, whose brands include Hutchinson and Mayrath.
Looking up at an AGI Eclipse galvanized tower and ladder cage against a blue sky

Compare AGI Hutchinson & Mayrath augers and conveyors

Search all 40 AGI Hutchinson augers, conveyors, grain pumps, sweeps and towers by line, name or feature.

Showing all 40 models

AGI Hutchinson HX2 swingaway auger with its red scissor-lift frame beside a steel grain bin

AGI Hutchinson portable auger

AGI Hutchinson & Mayrath HX² Swingaway Auger

Swingaway auger in 10, 13 and 16 inch sizes

up to 23,000bu./hr (16 in.)
63 to 125 ftlengths across sizes
10 / 13 / 16 in.diameters
  • Open discharge spout; the maker says it cuts horsepower 20%
  • Aircraft cable trussing and wide standing axles
  • Steerable axle, optional on 13 in. and standard on 16 in.
  • Redesigned boot with abrasion-resistant boot flight (13 and 16 in.)
  • Hopper options: X-Tend, power swing and swing mover
Full specifications
Diameter (in.)10 / 13 / 16
Length (ft.)63-83 / 74-114 / 85-125
Capacity (bu./hr, up to)6,000 / 11,000 / 23,000
FrameScissor lift / scissor lift (74-94) or A-frame (114) / A-frame

Source: AGI Hutchinson HX2 page.

AGI Hutchinson top drive auger with a red A-frame reaching the top of a galvanized grain bin

AGI Hutchinson portable auger

AGI Hutchinson & Mayrath Top Drive Auger

Top drive auger in 8, 10 and 13 inch sizes

up to 7,500bu./hr (13 in.)
32 to 82 ftlengths across sizes
8 / 10 / 13 in.diameters
  • Manual, hydraulic or electric winch options
  • PTO and electric drive options, with an oil lubricated gear drive on the 13 in.
  • Galvanized main tube
  • Aircraft cable trussing and A-frame undercarriage
  • Intake with extended wear flighting
Full specifications
Diameter (in.)8 / 10 / 13
Length (ft.)34-72 / 32-72 / 36-82
Capacity (bu./hr, up to)3,200 / 4,500 / 7,500

Source: AGI Hutchinson Portable Systems Brochure, Top Drive Augers page; also the Top Drive Auger page.

AGI Hutchinson STX2 truck auger with a grey tube and red frame stretched across a green field

AGI Hutchinson portable auger

AGI Hutchinson & Mayrath STX² Truck Auger

Truck auger built for durability and capacity

Encloseddriveline
Powder coatpaint finish
  • Reinforced flighting
  • Completely enclosed driveline
  • Heavy-duty hardened sprockets
  • High-speed roller chain

Source: AGI Hutchinson STX2 page.

AGI Hutchinson WRX truck auger lying across tall green grass with its red undercarriage

AGI Hutchinson portable auger

AGI Hutchinson & Mayrath WRX Truck Auger

Truck auger in 8 and 10 inch tubes with five drive options

8 or 10 in.tube diameters
5drive options
  • Motor, electric motor, PTO shaft, PTO belt or hydraulic drive
  • Solid tube drive guard encloses the driveline
  • Extra layer of steel on the flighting at critical wear points
  • Powder coat paint

Source: AGI Hutchinson WRX Truck Auger page.

AGI Hutchinson UTX U-trough auger angled up from a field with its red frame and engine

AGI Hutchinson portable auger

AGI Hutchinson & Mayrath UTX U-Trough Auger

U-trough auger with Wear Edge flighting

Triplebanded belts as standard
Squareone-bolt flight connections
  • Wear Edge Technology to extend flighting life
  • Powder coat paint to repel rust
  • Triple banded belts keep speed with less slippage
  • Square one-bolt flight connections for positive torque transfer

Source: AGI Hutchinson UTX page.

AGI Hutchinson LCX4 swing conveyor with its swing hopper and discharge raised on a white background

AGI Hutchinson belt conveyor

AGI Hutchinson & Mayrath LCX⁴ Swing Conveyor

PTO-driven swing conveyor that works with a 60 HP tractor

up to 9,000bu./hr
68 to 108 ftlengths
15 in.belt width
  • Mechanical PTO-driven swing, with no constant hydraulic flow needed
  • Reinforced scissor frame and trussing
  • Belt brush, three scrapers and turbo clean wash system
  • Low-profile steel swing hopper with wireless remote
  • Also built as Batco and Westfield models
Full specifications
Tube (in.)10
Belt width (in.)15
Length (ft.)68 / 78 / 88 / 98 / 108
Capacity (bu./hr, up to)9,000

Source: AGI Hutchinson LCX4 page.

AGI Hutchinson HFX4 field loader on a bare dirt field with its hopper on the ground

AGI Hutchinson belt conveyor

AGI Hutchinson & Mayrath HFX⁴ Field Loader

Field loader with electric, gas over hydraulic or hydraulic drive

up to 7,000bu./hr
39 / 44 / 49 ftlengths
up to 8,000bu./hr with SP mover
  • 10 in. tube with a 15 in. chevron belt
  • Pinch roller design for better belt traction
  • Pivoting under-hopper skid plate
  • Optional self-propelled mover kit with 37 HP Vanguard engine
Full specifications
Tube (in.)10
Belt width (in.)15
Length (ft.)39 / 44 / 49
Capacity (bu./hr, up to)7,000

Source: AGI Hutchinson HFX4 Field Loader page.

AGI Hutchinson HFX4 18S field loader on a light grey studio background

AGI Hutchinson belt conveyor

AGI Hutchinson & Mayrath HFX⁴ 18S Field Loader

High-capacity electric field loader with an 18 inch belt

up to 10,500bu./hr
39 / 44 ftlengths
18 in.belt width
  • 12 3/4 in. tube
  • Collapsible or steel hopper option
  • Pinch drive roller and a larger 5 in. drive roller
  • Low-profile hopper and handle
Full specifications
Tube (in.)12 ¾
Belt width (in.)18
Length (ft.)39 / 44
Capacity (bu./hr, up to)10,500

Source: AGI Hutchinson HFX4 18S page.

AGI Hutchinson HCX3 field loader on a gravel yard in front of steel grain bins

AGI Hutchinson belt conveyor

AGI Hutchinson & Mayrath HCX³ Field Loader

All-commodity field loader with a wash system

up to 10,000bu./hr
49 ftlength
2 yearlimited warranty
  • Handles canola and fertilizer with two belt scrapers and a belt brush
  • Turbo clean wash system
  • Redesigned S-Drive and wider hopper
  • Ergonomic command center with electronic throttle
Full specifications
Tube (in.)10
Belt width (in.)15
Length (ft.)49
Capacity (bu./hr, up to)10,000

Source: AGI Hutchinson Belt Conveyor and Accessories Brochure, HCX3 page.

AGI Hutchinson HCX field loader conveyor angled up beside steel grain bins

AGI Hutchinson belt conveyor

AGI Hutchinson & Mayrath HCX Field Loader

Field loader with a 10 inch tube and 15 inch belt

up to 10,000bu./hr
39 / 44 / 49 ftlengths
15 in.belt width
  • 2-ply chevron belt with a nylon slider back and pinch S-drive
  • Weather guards protect the belt year-round
  • Plastic hood and collapsible canvas hopper to cushion fragile materials
Full specifications
Tube (in.)10
Belt width (in.)15
Length (ft.)39 / 44 / 49
Capacity (bu./hr, up to)10,000

Source: AGI Hutchinson HCX Field Loader page.

AGI Hutchinson swingaway belt conveyor in red and white beside a green tractor

AGI Hutchinson belt conveyor

AGI Hutchinson & Mayrath Swingaway Conveyor

HCX 1590 SA with a hydraulic swingaway and winch

90 ftlength
10 in.tube
15 in.belt width
  • Hydraulic swingaway moves the hopper into position
  • Hydraulic winch raises and lowers the hopper
  • The maker says it reaches the bin without losing capacity
Full specifications
Tube (in.)10
Belt width (in.)15
Length (ft.)90

Source: AGI Hutchinson Swingaway Conveyor page.

AGI Hutchinson Drive Over Pitstop conveyor with a black hood parked on dirt beside a cornfield

AGI Hutchinson belt conveyor

AGI Hutchinson & Mayrath Drive Over Pitstop

Drive-over hopper for unloading trucks

25 / 27 ftlengths
  • Drive-over hopper unloads trucks without moving the hopper once set
  • Electric or hydraulic models
  • Fast grain flow and better containment, the maker says
Full specifications
Length (ft.)25 / 27

Source: AGI Hutchinson Drive Over Pitstop page.

AGI Hutchinson transfer conveyor with a black hopper on a chip-covered yard

AGI Hutchinson belt conveyor

AGI Hutchinson & Mayrath Transfer Conveyor

Low-profile HCX2 1515 LP that works with any conveyor

Electricor hydraulic drive
  • Loads and unloads trucks and bins
  • Works with any conveyor
  • Durable, low-maintenance design

Source: AGI Hutchinson Transfer Conveyor page.

AGI Hutchinson Trac Mass-ter chain conveyor with its screw intake mounted to a green tractor

AGI Hutchinson chain conveyor

AGI Hutchinson & Mayrath Trac Mass-ter

Chain conveyor with a 16 inch screw intake

up to 10,000bu./hr
40 ftlength
90 HPPTO power
  • Incline chain conveyor with a large 16 in. screw conveyor intake
  • Moves like a mounted unit from the tractor cab or stands on its own
  • Standard abrasion-resistant lining
  • Hydraulic adjustable or swivel spout available
Full specifications
Length (ft.)40
Capacity (bu./hr, up to)10,000
PTO power (HP)90

Source: AGI Hutchinson Portable Systems Brochure, Trac Mass-ter page.

AGI Hutchinson Portable Mass-ter Mover chain conveyor standing at an angle on a white background

AGI Hutchinson chain conveyor

AGI Hutchinson & Mayrath Portable Mass-ter Mover

En masse conveyor in 50 and 85 models

up to 10,000bu./hr (85 model)
40 to 100 ftlengths
  • UHMW paddles, which the maker says keep grain flowing gently
  • PTO and electric drive options
  • Hydraulic winch standard on 85 models 70 ft and longer
  • Expandable axles on 85 models in 80 and 90 ft lengths
Full specifications
Model50 / 85
Length (ft.)40-100 / 40-90
Capacity (bu./hr, up to)5,000 / 10,000

Source: AGI Hutchinson Portable Systems Brochure, Portable Mass-ter Mover page.

AGI Hutchinson portable Grain Pump raised against steel grain bins

AGI Hutchinson chain conveyor

AGI Hutchinson & Mayrath Portable Grain Pump

En masse conveyor in 8, 10 and 12 inch sizes

up to 10,000bu./hr (12 in.)
42 to 130 ftlengths
  • The maker says it needs less horsepower than air systems
  • Hydraulic, electric or hand winches, ordered separately
  • Heavy-duty enclosed gearbox
  • Swivel arc kit for tight spaces
Full specifications
Diameter (in.)8 / 10 / 12
Length (ft.)42-82 / 42-82 / 42-130
Capacity (bu./hr, up to)4,000 / 6,000 / 10,000

Source: AGI Hutchinson Portable Systems Brochure, Portable Grain Pump page.

AGI Hutchinson portable Grain Pump swingaway lying on grass with its hopper at the front

AGI Hutchinson chain conveyor

AGI Hutchinson & Mayrath Portable Grain Pump Swingaway

PTO-driven pump with a hydraulic belt swing away

up to 6,000bu./hr
42 to 82 ftlengths
10 in.diameter
  • Moves grain in columns, which the maker says preserves quality
  • Galvanized 12 gauge tube housing
  • Hydraulic winch comes standard
  • Lower horsepower requirement
Full specifications
Diameter (in.)10
Length (ft.)42 / 52 / 62 / 72 / 82
Capacity (bu./hr, up to)6,000

Source: AGI Hutchinson Portable Grain Pump Swingaway page.

AGI Hutchinson drive-over chain conveyor with red ramps and a center hopper

AGI Hutchinson chain conveyor

AGI Hutchinson & Mayrath Drive-Over Chain Conveyor

Low-profile truck-unloading conveyor, 8 3/4 inches high

8 3/4 in.height
3,500 to 8,000bu./hr
  • Long spring-loaded ramps standard
  • Electric and hydraulic drive options
  • Removable hitch and folding ramps for transport
  • Optional side unload kit; stationary version available

Source: AGI Hutchinson Standard Drive-Over Chain Conveyor page.

AGI Hutchinson commercial drive-over chain conveyor with long red ramps and a center grating

AGI Hutchinson chain conveyor

AGI Hutchinson & Mayrath Commercial Drive-Over Chain Conveyor

Electric-drive drive-over conveyor for commercial loads

up to 10,000bu./hr
  • Removable drive-over covers make a full-width receiving hopper
  • Hydraulic axle and folding ramps
  • 3/8 in. thick UHMW paddles and 7 ga housing
  • Stationary version available

Source: AGI Hutchinson Commercial Drive-Over Chain Conveyor page.

Line drawing of an AGI Hutchinson roof auger running up a grain bin roof

AGI Hutchinson stationary conveyor

AGI Hutchinson & Mayrath Roof Auger

Auger for loading a grain bin from the roof

Bin roofmount
  • Loads a grain bin from the roof

Source: AGI Hutchinson Roof Auger page.

AGI Hutchinson utility auger with a red frame and wheels on a white background

AGI Hutchinson stationary conveyor

AGI Hutchinson & Mayrath Utility Auger

Stationary auger in a variety of sizes

Manysizes
  • Covers on-farm grain handling
  • Offered in a variety of sizes

Source: AGI Hutchinson Utility Auger page.

AGI Hutchinson custom auger head with a hopper and drive shown on white

AGI Hutchinson stationary conveyor

AGI Hutchinson & Mayrath Custom Auger

Stationary auger built to length

1 ftlength increments
11 / 21 fthead components
  • Standard extension components in 5, 10, 15 and 20 ft lengths
  • Gear reducer, oil bath chain reducer or direct belt drive
  • Galvanized tube standard on the 6, 8, 10 and 12 models

Source: AGI Hutchinson Custom Auger page.

AGI Hutchinson stationary conveyor

AGI Hutchinson & Mayrath Commercial Grain Pump

Load-in, load-out system with recirculation

up to 18,000bu./hr (16 in.)
10 / 12 / 16 in.loop sizes
  • UHMW paddles spaced every 10.5 in.
  • Closed-loop design
  • Multiple sizes and configurations
Full specifications
Loop diameter (in.)10 / 12 / 16
Capacity (bu./hr, up to)6,000 / 10,000 / 18,000

Source: AGI Hutchinson Chain & Paddle Conveyors Brochure, Commercial Grain Pump page.

AGI Hutchinson Grain Pump loop running over a row of silver AGI grain bins

AGI Hutchinson stationary conveyor

AGI Hutchinson & Mayrath Grain Pump Loop

Closed loop for blending and moving grain between bins

up to 10,000bu./hr (12 in.)
6 to 12 in.loop sizes
  • Blends higher moisture and dried grain between bins, which the maker says reduces drying cost
  • Paddles spaced every 10.5 in.
  • Complete load-in and load-out system
Full specifications
Loop diameter (in.)6 / 8 / 10 / 12
Capacity (bu./hr, up to)1,500 / 4,000 / 6,000 / 10,000

Source: AGI Hutchinson Chain & Paddle Conveyors Brochure, Grain Pump page.

AGI Hutchinson Grain Pump double run beside a grain bin and a flag

AGI Hutchinson stationary conveyor

AGI Hutchinson & Mayrath Grain Pump Double Run

High-angle loading with a flow-through inlet

up to 10,000bu./hr (12 in.)
Up to 60degree angle
  • Lengths in 5 ft increments
  • Closed-loop recirculation
  • Flow-through inlet for overhead use
Full specifications
Loop diameter (in.)6 / 8 / 10 / 12
Capacity (bu./hr, up to)1,500 / 4,000 / 6,000 / 10,000

Source: AGI Hutchinson Chain & Paddle Conveyors Brochure, Stationary Double Run page.

Rendering of an AGI Hutchinson drag conveyor running beneath three grain bins

AGI Hutchinson stationary conveyor

AGI Hutchinson & Mayrath Mass-ter Flow Drag Conveyor

Stationary en masse conveyor

2,500 to 15,000bu./hr
240 ftsingle run limit
  • UHMW shallow paddles
  • Easily removable covers for cleaning
  • Optional reversible drive
  • Optional abrasion-resistant plate liner

Source: AGI Hutchinson Mass-ter Flow Drag Conveyor page.

AGI Hutchinson dual hopper chain conveyor installed in a trench under a grating

AGI Hutchinson stationary conveyor

AGI Hutchinson & Mayrath Dual Hopper Chain Conveyor

Unloads both trailer hoppers at once

10,000 / 15,000 / 20,000bu./hr options
  • Direct drive without belts
  • 7-gauge laser cut sheet steel
  • Drive-over grating meets OSHA standard 1910.272
  • Spring take-ups for constant chain tension

Source: AGI Hutchinson Dual Hopper Chain Conveyor page.

Technical line drawing of an AGI Hutchinson low profile chain conveyor from above and the side

AGI Hutchinson stationary conveyor

AGI Hutchinson & Mayrath Low Profile Chain Conveyor

Stationary conveyor for unloading trucks

10,000bu./hr with electric drive
  • 3/8 in. thick UHMW paddles and 7 ga housing
  • Shallow installation
  • Works with the Dual Hopper Chain Conveyor 10,000 BPH option

Source: AGI Hutchinson Low Profile Chain Conveyor page.

AGI Hutchinson Standard Klean Sweep running across the floor of a grain bin

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Standard Klean Sweep

Sweep for bins up to 40 ft across

up to 40 ftbin diameter
  • Rubber disk end-wheel drives the sweep around the bin
  • Intermediate flight bearings on bins 30 ft and larger
  • 10 in. units have bronze bearings every 10 ft or less

Source: AGI Hutchinson Standard Klean Sweep page.

AGI Hutchinson Commercial Klean Sweep drive head with a red auger section

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Commercial Klean Sweep

Sweep for commercial bins up to 105 ft

up to 105 ftbin diameter
  • Sweep tractor drive standard on 1214 models
  • Intermediate flight bearings every 10 ft or less
  • New 2.25:1 double gearbox on 810 and 1012 series

Source: AGI Hutchinson Commercial Klean Sweep page.

AGI Hutchinson power sweep unit with red frame and center well on a white background

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Standard and Heavy-Duty Power Sweep

One motor outside the bin runs the unload flight and sweep

8.5 to 1wheel reduction
  • Stays in the bin during filling
  • Standard and heavy-duty external or internal clutch
  • Sweep carrier for bins 48 ft and larger
  • Horizontal or 25 degree power head options

Source: AGI Hutchinson Standard & Heavy-Duty Power Sweep page.

AGI Hutchinson commercial power sweep with a long sweep arm and drive on a white background

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Commercial Power Sweep

Separate sweep drive that works with several unloaders

8.5:1end wheel reduction
  • Works with auger unloaders, U-trough, chain conveyors and Grain Pump loops
  • Two gearboxes for a compact center well
  • Sweep carrier for bins 48 ft and larger

Source: AGI Hutchinson Commercial Power Sweep page.

AGI Hutchinson Hi-Flow Sweep with a red drive housing and screw flight on a white background

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Hi-Flow Sweep

Zero-entry sweep for the largest bins

Zerobin entry
  • Zero-entry controls with panels outside the bin
  • Below-floor motor reachable from the reclaim tunnel
  • Hydraulic track drive reduces wheel spinning
  • 1/4 in. flights on 3 in. schedule 40 pipe

Source: AGI Hutchinson Hi-Flow Sweep page.

AGI Hutchinson NexGen commercial sweep with red drive head and grey auger in a large bin

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath NexGen 2000 and 3000 Commercial Sweep

Modular sweep that stays in the bin

36 to 120 ftbin diameters
12.5 in.flight O.D.
  • Zero-entry controls with full automation or manual operation
  • Built to remain in the bin
  • Optional Tru-Klean drag for a near broom-swept finish

Source: AGI Hutchinson NexGen 2000 & 3000 page.

AGI Hutchinson under-bin auger unloading system with a red center well in a bin floor

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Standard and Commercial Auger Unloading

Complete bin unloads or separate components

Completeunits or parts ordered separately
  • Center well, intermediate wells, control pipe kits and a power head
  • Control lever or rack and pinion openers
  • Bin flanges and quick connect flange clamps

Source: AGI Hutchinson Standard & Commercial Auger Unloading page.

AGI Hutchinson vertical bin unload parts: a spout, a tall tube with brackets and a gearbox housing

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Vertical Bin Unload

Bin unload that discharges straight into a truck or mixer

6 / 8 / 10 in.sizes
16 ft 6 in.height (8 and 10 in.)
  • One electric motor runs the vertical and horizontal auger
  • 45 degree discharge with a 3 ft solid spout
  • Base support and bin wall brackets included
Full specifications
Diameter (in.)6 / 8 / 10
Height of 8 and 10 in. units16' 6"

Source: AGI Hutchinson Vertical Bin Unload page.

Line drawings of an AGI Hutchinson horizontal unload power head

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Horizontal Unloads

Direct belt drive and reduction chain drive power heads

2,000 to 6,000bu./hr
8 to 12 in.sizes
  • Direct belt drive in 8, 10 and 12 in. sizes
  • Reduction chain drive in 10 and 12 in. sizes
  • 12-gauge corrosion resistant tubular housing on 8 and 10 in. units
Full specifications
Drive and size8 in. direct belt / 10 in. direct belt / 12 in. direct drive
Capacity (bu./hr, up to)2000 / 4000 / 6000

Source: AGI Hutchinson Horizontal Unloads page.

AGI Hutchinson Mass-ter Mover unload spout and chain system along a curved bin wall

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Mass-ter Mover Unload

Chain and paddle bin unload

UHMWplastic paddles
  • 81 X, 81 XHH and WH 124 roller chain
  • Roller gated or rack and pinion gate wells
  • High capacity at lower speeds

Source: AGI Hutchinson Mass-ter Mover Unload page.

Two AGI Hutchinson 25 degree power heads with red housings and grey tubes

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Power Heads 25 Degree

25 degree standard power heads for unloading tubes

Nearly 2 ftextra discharge height
  • Attaches to any standard unloading tube
  • Discharges into an auger hopper or a 36 to 50 ft low profile conveyor
  • Sizes from 6 in. to 6 in. up to 12 in. to 14 in.

Source: AGI Hutchinson Power Heads 25 Degree Standard page.

Looking up at an AGI Eclipse galvanized tower and ladder cage against a blue sky

AGI Hutchinson bin unload

AGI Hutchinson & Mayrath Eclipse Towers and Catwalks

Tower and catwalk system for light-duty farm use

Up to 62 ftwith 6 or 8 ft base sections
82 ftmaximum build height
  • Roll-formed C channel design in 12-gauge galvanized steel
  • Tower sections in 2 or 4 ft increments
  • Conveyor supports, manwalks, platforms and ladders

Source: AGI Hutchinson Eclipse Towers & Catwalks page.

Portable augers at a glance

ModelHX² Swingaway AugerTop Drive Auger
Diameter (in.)10 / 13 / 168 / 10 / 13
Length (ft.)63-83 / 74-114 / 85-12534-72 / 32-72 / 36-82
Capacity (bu./hr, up to)6,000 / 11,000 / 23,0003,200 / 4,500 / 7,500

Portable belt conveyors at a glance

ModelLCX⁴ Swing ConveyorHFX⁴ Field LoaderHFX⁴ 18S Field LoaderHCX³ Field LoaderHCX Field LoaderSwingaway ConveyorDrive Over Pitstop
Tube (in.)101012 ¾101010–
Belt width (in.)151518151515–
Length (ft.)68 / 78 / 88 / 98 / 10839 / 44 / 4939 / 444939 / 44 / 499025 / 27
Capacity (bu./hr, up to)9,0007,00010,50010,00010,000––

Portable chain conveyors and grain pumps at a glance

ModelTrac Mass-terPortable Mass-ter MoverPortable Grain PumpPortable Grain Pump Swingaway
Diameter (in.)––8 / 10 / 1210
Length (ft.)4040-100 / 40-9042-82 / 42-82 / 42-13042 / 52 / 62 / 72 / 82
Capacity (bu./hr, up to)10,0005,000 / 10,0004,000 / 6,000 / 10,0006,000

Stationary augers and chain conveyors at a glance

ModelCommercial Grain PumpGrain Pump LoopGrain Pump Double Run
Loop diameter (in.)10 / 12 / 166 / 8 / 10 / 126 / 8 / 10 / 12
Capacity (bu./hr, up to)6,000 / 10,000 / 18,0001,500 / 4,000 / 6,000 / 10,0001,500 / 4,000 / 6,000 / 10,000

AGI Hutchinson and Mayrath parts and manuals

AGI lists a Hutchinson & Mayrath Parts Catalog and posts product brochures. Bring the model name from the decal to the Clinton Tractor parts counter at (315) 853-6151 and ask for Hutchinson & Mayrath parts.

  • Auger flighting
  • Gearboxes
  • Winches
  • Hoppers
  • UHMW paddles
  • Roller chain
  • Belting
  • Sweep drive parts
  • Power heads
  • Swivel arc kits
Ask the parts counter

Service department

Clinton Tractor's shop works out of 31 Meadow St. Call the service desk with the make and model, the work it needs and whether we have seen it before, and they will tell you what the shop can take on.

Call the service desk

Built into AGI Hutchinson equipment

Maker warranty and support

The maker's HCX³ page lists a 2 year limited warranty. Warranty terms for other models are not on the pages we checked.

What the maker says

HCX³ Field Loader: "2 Year Limited Warranty" (product page).

Hutchinson customer line: 1-800-523-6993, or 1-785-632-2161 direct.

Options and accessories

AGI Hutchinson lists these options on its product pages. Not every option fits every model, so ask which ones suit the machine you are looking at.

Also available

Find us in Clinton

The yard, the parts counter and the shop share one address, about a quarter of an hour from Utica.

Clinton Tractor & Implement Co.
31 Meadow St, Clinton, NY 13323
Monday–Friday 7:00 am – 5:00 pm, Saturday 7:00 am – 12:00 pm, closed Sunday
Get directions(315) 853-6151

Driving distance

  • New Hartford 6 mi
  • Utica 9 mi
  • Rome 14 mi
  • Oneida 17 mi
  • Hamilton 20 mi
  • Herkimer 26 mi
  • Cazenovia 31 mi
  • Norwich 42 mi
  • Cooperstown 47 mi
  • Syracuse 49 mi
  • Oneonta 60 mi
  • Cortland 61 mi

Before you visit

Can I see AGI Hutchinson & Mayrath augers and conveyors in person?

Call (315) 853-6151 before you drive over and ask which AGI Hutchinson & Mayrath augers and conveyors we can show you. The yard is at 31 Meadow St, Clinton, open Monday–Friday 7:00 am – 5:00 pm and Saturday 7:00 am – 12:00 pm.

Can you order a model that is not on the lot?

Ask the sales desk at (315) 853-6151. Tell us the model and how you will use it, and we will check what we can get.

Do you take trade-ins?

Ask the sales desk at (315) 853-6151 and describe the machine you want to trade.

Is financing available?

Ask the sales desk at (315) 853-6151 about payment options for the model you are looking at.

How do I ask about a repair?

Call the service desk at (315) 853-6151 with the make and model, the work it needs and whether we have seen it before. They will tell you what the shop can take on.